The configured user with the stated attributes: steve Cleartext-Password := "testing" Service-Type = Framed-User, Framed-Protocol = PPP, Framed-IP-Address = 192.168.1.2, Framed-IP-Netmask = 255.255.255.0, Alc-IPsec-Interface = private_ipsec, Alc-IPsec-SA-Lifetime = 1200, Alc-IPsec-SA-Encr-Algorithm = aes128, Alc-IPsec-SA-Auth-Algorithm = sha1, Error received on running radtest remains same. But when i comment the attributes the radtest is successful On 24 June 2013 19:55, <A.L.M.Buxey@lboro.ac.uk> wrote:

Hi,

...

I am creating attributes for the user using the scripts below but on running the radtest i get the failure attributes ; which seems to have changed. I am using Freeradius 2.1.0 .

"user1test" Auth-Type := Local, User-Password == "testpassword"

Framed-IP-Address = 172.162.3.33,

Framed-IP-Netmask = 255.255.255.0,

Alc-Primary-Dns = 4.4.2.2,

Alc-Primary-Nbns = 8.8.4.4,

Alc-IPsec-Serv-Id = 199920,

Alc-IPsec-Interface = public_ipsec,

Alc-IPsec-SA-Lifetime = 1200,

Alc-IPsec-SA-Encr-Algorithm = aes128,

Alc-IPsec-SA-Auth-Algorithm = sha1

1) its Cleartext-Password := NOT User-Password ==

2) formatting is VERY important...I hope you dont have blank lines between each entry

3) ensure that these attributes that you are using are in a dictionary file and that the dictionary file is being read by the server when it starts

alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-- Regards: George Innocent.