Freeradius service does not start
Hello, I wanted to start Freeradius server for configuring access with client devices. After installing the Freeradius server the Freeradius service is active but sometimes after the new installation or after executing the systemctl status freeradius command the service is not active. The current output is: ● freeradius.service - FreeRADIUS multi-protocol policy server Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2024-01-23 07:54:55 CET; 2s ago Docs: man:radiusd(8) man:radiusd.conf(5) http://wiki.freeradius.org/ http://networkradius.com/doc/ Process: 24003 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cx -lstdout (code=exited, status=226/NAMESPACE) CPU: 15ms Before the new installation I uninstalled Freeradius with apt purge freeradius and apt autoremove. status=226/NAMESPACE - usually appears sometimes after new Freeradius server installation. Freeradius server sometimes starts after new installation, sometimes not. If the Freeradius service starts, after a while it stops and after running systemctl status freeradius on exit, the message : status=1/FAILURE instead of status=226/NAMESPACE compared to the output above. OS: "Raspbian GNU/Linux 11 (bullseye) Below I place the debug output : radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory /etc/freeradius/3.0/mods-enabled/including configuration file /etc/freeradius/3.0/mods-enabled/expirationincluding configuration file /etc/freeradius/3.0/mods-enabled/alwaysincluding configuration file /etc/freeradius/3.0/mods-enabled/detail.logincluding configuration file /etc/freeradius/3.0/mods-enabled/passwdincluding configuration file /etc/freeradius/3.0/mods-enabled/papincluding configuration file /etc/freeradius/3.0/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/3.0/mods-enabled/echoincluding configuration file /etc/freeradius/3.0/mods-enabled/radutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/digestincluding configuration file /etc/freeradius/3.0/mods-enabled/utf8including configuration file /etc/freeradius/3.0/mods-enabled/sradutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/sohincluding configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clientsincluding configuration file /etc/freeradius/3.0/mods-enabled/cache_eapincluding configuration file /etc/freeradius/3.0/mods-enabled/attr_filterincluding configuration file /etc/freeradius/3.0/mods-enabled/eapincluding configuration file /etc/freeradius/3.0/mods-enabled/mschapincluding configuration file /etc/freeradius/3.0/mods-enabled/replicateincluding configuration file /etc/freeradius/3.0/mods-enabled/logintimeincluding configuration file /etc/freeradius/3.0/mods-enabled/realmincluding configuration file /etc/freeradius/3.0/mods-enabled/execincluding configuration file /etc/freeradius/3.0/mods-enabled/filesincluding configuration file /etc/freeradius/3.0/mods-enabled/unpackincluding configuration file /etc/freeradius/3.0/mods-enabled/linelogincluding configuration file /etc/freeradius/3.0/mods-enabled/unixincluding configuration file /etc/freeradius/3.0/mods-enabled/detailincluding configuration file /etc/freeradius/3.0/mods-enabled/chapincluding configuration file /etc/freeradius/3.0/mods-enabled/exprincluding configuration file /etc/freeradius/3.0/mods-enabled/preprocessincluding files in directory /etc/freeradius/3.0/policy.d/including configuration file /etc/freeradius/3.0/policy.d/abfab-trincluding configuration file /etc/freeradius/3.0/policy.d/cuiincluding configuration file /etc/freeradius/3.0/policy.d/operator-nameincluding configuration file /etc/freeradius/3.0/policy.d/filterincluding configuration file /etc/freeradius/3.0/policy.d/dhcpincluding configuration file /etc/freeradius/3.0/policy.d/accountingincluding configuration file /etc/freeradius/3.0/policy.d/debugincluding configuration file /etc/freeradius/3.0/policy.d/eapincluding configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-idsincluding configuration file /etc/freeradius/3.0/policy.d/controlincluding configuration file /etc/freeradius/3.0/policy.d/canonicalizationincluding configuration file /etc/freeradius/3.0/policy.d/rfc7542including files in directory /etc/freeradius/3.0/sites-enabled/including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/3.0/sites-enabled/defaultmain { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius"}main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.17.30.250 { ipv4addr = 10.17.30.250 require_message_authenticator = no secret = <<< secret >>> shortname = "rdses1013-2" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } }Debugger not attachedsystemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digestradiusd: #### Instantiating modules #### modules { # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" }Creating attribute Unix-Group # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } }Please use tls_min_version and tls_max_version instead of disable_tlsv1Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/filesreading pairlist file /etc/freeradius/3.0/mods-config/files/authorizereading pairlist file /etc/freeradius/3.0/mods-config/files/accountingreading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocessreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/3.0/radiusd.conf} # serverserver inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336} # server inner-tunnelserver default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}} # server defaultradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = 127.0.0.1 port = 18120}listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on proxy address * port 39219Ready to process requests Best Regards.
Below I place the debug output : radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory /etc/freeradius/3.0/mods-enabled/including configuration file /etc/freeradius/3.0/mods-enabled/expirationincluding configuration file /etc/freeradius/3.0/mods-enabled/alwaysincluding configuration file /etc/freeradius/3.0/mods-enabled/detail.logincluding configuration file /etc/freeradius/3.0/mods-enabled/passwdincluding configuration file /etc/freeradius/3.0/mods-enabled/papincluding configuration file /etc/freeradius/3.0/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/3.0/mods-enabled/echoincluding configuration file /etc/freeradius/3.0/mods-enabled/radutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/digestincluding configuration file /etc/freeradius/3.0/mods-enabled/utf8including configuration file /etc/freeradius/3.0/mods-enabled/sradutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/sohincluding configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clientsincluding configuration file /etc/freeradius/3.0/mods-enabled/cache_eapincluding configuration file /etc/freeradius/3.0/mods-enabled/attr_filterincluding configuration file /etc/freeradius/3.0/mods-enabled/eapincluding configuration file /etc/freeradius/3.0/mods-enabled/mschapincluding configuration file /etc/freeradius/3.0/mods-enabled/replicateincluding configuration file /etc/freeradius/3.0/mods-enabled/logintimeincluding configuration file /etc/freeradius/3.0/mods-enabled/realmincluding configuration file /etc/freeradius/3.0/mods-enabled/execincluding configuration file /etc/freeradius/3.0/mods-enabled/filesincluding configuration file /etc/freeradius/3.0/mods-enabled/unpackincluding configuration file /etc/freeradius/3.0/mods-enabled/linelogincluding configuration file /etc/freeradius/3.0/mods-enabled/unixincluding configuration file /etc/freeradius/3.0/mods-enabled/detailincluding configuration file /etc/freeradius/3.0/mods-enabled/chapincluding configuration file /etc/freeradius/3.0/mods-enabled/exprincluding configuration file /etc/freeradius/3.0/mods-enabled/preprocessincluding files in directory /etc/freeradius/3.0/policy.d/including configuration file /etc/freeradius/3.0/policy.d/abfab-trincluding configuration file /etc/freeradius/3.0/policy.d/cuiincluding configuration file /etc/freeradius/3.0/policy.d/operator-nameincluding configuration file /etc/freeradius/3.0/policy.d/filterincluding configuration file /etc/freeradius/3.0/policy.d/dhcpincluding configuration file /etc/freeradius/3.0/policy.d/accountingincluding configuration file /etc/freeradius/3.0/policy.d/debugincluding configuration file /etc/freeradius/3.0/policy.d/eapincluding configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-idsincluding configuration file /etc/freeradius/3.0/policy.d/controlincluding configuration file /etc/freeradius/3.0/policy.d/canonicalizationincluding configuration file /etc/freeradius/3.0/policy.d/rfc7542including files in directory /etc/freeradius/3.0/sites-enabled/including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/3.0/sites-enabled/defaultmain { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius"}main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } }Debugger not attachedsystemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digestradiusd: #### Instantiating modules #### modules { # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" }Creating attribute Unix-Group # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } }Please use tls_min_version and tls_max_version instead of disable_tlsv1Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/filesreading pairlist file /etc/freeradius/3.0/mods-config/files/authorizereading pairlist file /etc/freeradius/3.0/mods-config/files/accountingreading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocessreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/3.0/radiusd.conf} # serverserver inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336} # server inner-tunnelserver default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}} # server defaultradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = 127.0.0.1 port = 18120}listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on proxy address * port 40894Ready to process requests On Tuesday, January 23, 2024 at 09:20:13 AM GMT+1, Dumitru via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote: Hello, I wanted to start Freeradius server for configuring access with client devices. After installing the Freeradius server the Freeradius service is active but sometimes after the new installation or after executing the systemctl status freeradius command the service is not active. The current output is: ● freeradius.service - FreeRADIUS multi-protocol policy server Loaded: loaded (/lib/systemd/system/freeradius.service; enabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Tue 2024-01-23 07:54:55 CET; 2s ago Docs: man:radiusd(8) man:radiusd.conf(5) http://wiki.freeradius.org/ http://networkradius.com/doc/ Process: 24003 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cx -lstdout (code=exited, status=226/NAMESPACE) CPU: 15ms Before the new installation I uninstalled Freeradius with apt purge freeradius and apt autoremove. status=226/NAMESPACE - usually appears sometimes after new Freeradius server installation. Freeradius server sometimes starts after new installation, sometimes not. If the Freeradius service starts, after a while it stops and after running systemctl status freeradius on exit, the message : status=1/FAILURE instead of status=226/NAMESPACE compared to the output above. OS: "Raspbian GNU/Linux 11 (bullseye) Below I place the debug output : radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory /etc/freeradius/3.0/mods-enabled/including configuration file /etc/freeradius/3.0/mods-enabled/expirationincluding configuration file /etc/freeradius/3.0/mods-enabled/alwaysincluding configuration file /etc/freeradius/3.0/mods-enabled/detail.logincluding configuration file /etc/freeradius/3.0/mods-enabled/passwdincluding configuration file /etc/freeradius/3.0/mods-enabled/papincluding configuration file /etc/freeradius/3.0/mods-enabled/ntlm_authincluding configuration file /etc/freeradius/3.0/mods-enabled/echoincluding configuration file /etc/freeradius/3.0/mods-enabled/radutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/digestincluding configuration file /etc/freeradius/3.0/mods-enabled/utf8including configuration file /etc/freeradius/3.0/mods-enabled/sradutmpincluding configuration file /etc/freeradius/3.0/mods-enabled/sohincluding configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clientsincluding configuration file /etc/freeradius/3.0/mods-enabled/cache_eapincluding configuration file /etc/freeradius/3.0/mods-enabled/attr_filterincluding configuration file /etc/freeradius/3.0/mods-enabled/eapincluding configuration file /etc/freeradius/3.0/mods-enabled/mschapincluding configuration file /etc/freeradius/3.0/mods-enabled/replicateincluding configuration file /etc/freeradius/3.0/mods-enabled/logintimeincluding configuration file /etc/freeradius/3.0/mods-enabled/realmincluding configuration file /etc/freeradius/3.0/mods-enabled/execincluding configuration file /etc/freeradius/3.0/mods-enabled/filesincluding configuration file /etc/freeradius/3.0/mods-enabled/unpackincluding configuration file /etc/freeradius/3.0/mods-enabled/linelogincluding configuration file /etc/freeradius/3.0/mods-enabled/unixincluding configuration file /etc/freeradius/3.0/mods-enabled/detailincluding configuration file /etc/freeradius/3.0/mods-enabled/chapincluding configuration file /etc/freeradius/3.0/mods-enabled/exprincluding configuration file /etc/freeradius/3.0/mods-enabled/preprocessincluding files in directory /etc/freeradius/3.0/policy.d/including configuration file /etc/freeradius/3.0/policy.d/abfab-trincluding configuration file /etc/freeradius/3.0/policy.d/cuiincluding configuration file /etc/freeradius/3.0/policy.d/operator-nameincluding configuration file /etc/freeradius/3.0/policy.d/filterincluding configuration file /etc/freeradius/3.0/policy.d/dhcpincluding configuration file /etc/freeradius/3.0/policy.d/accountingincluding configuration file /etc/freeradius/3.0/policy.d/debugincluding configuration file /etc/freeradius/3.0/policy.d/eapincluding configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-idsincluding configuration file /etc/freeradius/3.0/policy.d/controlincluding configuration file /etc/freeradius/3.0/policy.d/canonicalizationincluding configuration file /etc/freeradius/3.0/policy.d/rfc7542including files in directory /etc/freeradius/3.0/sites-enabled/including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnelincluding configuration file /etc/freeradius/3.0/sites-enabled/defaultmain { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius"}main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes }}radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { }radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.17.30.250 { ipv4addr = 10.17.30.250 require_message_authenticator = no secret = <<< secret >>> shortname = "rdses1013-2" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } }Debugger not attachedsystemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = digestradiusd: #### Instantiating modules #### modules { # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_detail # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" }Creating attribute Unix-Group # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } instantiate { } # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.logrlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwdrlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eaprlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filterreading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key" certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem" ca_file = "/etc/ssl/certs/ca-certificates.crt" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } }Please use tls_min_version and tls_max_version instead of disable_tlsv1Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no }tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschaprlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/filesreading pairlist file /etc/freeradius/3.0/mods-config/files/authorizereading pairlist file /etc/freeradius/3.0/mods-config/files/accountingreading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocessreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroupsreading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints } # modulesradiusd: #### Loading Virtual Servers ####server { # from file /etc/freeradius/3.0/radiusd.conf} # serverserver inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...}Ignoring "sql" (see raddb/mods-available/README.rst)Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336} # server inner-tunnelserver default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...}} # server defaultradiusd: #### Opening IP addresses and Ports ####listen { type = "auth" ipaddr = 127.0.0.1 port = 18120}listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 }}Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnelListening on auth address * port 1812 bound to server defaultListening on acct address * port 1813 bound to server defaultListening on proxy address * port 39219Ready to process requests Best Regards. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Jan 23, 2024, at 4:03 AM, Dumitru via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote:
Below I place the debug output : radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory
Please post a version with correct line wrapping. This version is essentially unreadable.
Ready to process requests
i.e. no errors. Is there a problem you're running into? Do you have a question? Alan DeKok.
Hello Alan, after installing the freeradius server, the Process error appears: 23574 ExecStart=/usr/sbin/freeradius -f $FREERADIUS_OPTIONS (code=exited, status=1/FAILURE). : This is end of output afther installation: Generating DH parameters, 1024 bit long safe prime, generator 2 This is going to take a long time ..................................+..............+.......................................+...........+......+....................................++*++*++*++*++* Setting up freeradius (3.0.21+dfsg-2.2+deb11u1) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Job for freeradius.service failed because the control process exited with error code. See "systemctl status freeradius.service" and "journalctl -xe" for details. invoke-rc.d: initscript freeradius, action "start" failed. ● freeradius.service - FreeRADIUS multi-protocol policy server Loaded: loaded (/lib/systemd/system/freeradius.service; disabled; vendor preset: enabled) Active: activating (auto-restart) (Result: exit-code) since Fri 2024-01-26 09:16:27 CET; 32ms ago Docs: man:radiusd(8) man:radiusd.conf(5) http://wiki.freeradius.org/ http://networkradius.com/doc/ Process: 2564 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cx -lstdout (code=exited, status=0/SUCCESS) Process: 2573 ExecStart=/usr/sbin/freeradius -f $FREERADIUS_OPTIONS (code=exited, status=1/FAILURE) Main PID: 2573 (code=exited, status=1/FAILURE) CPU: 762ms Created symlink /etc/systemd/system/multi-user.target.wants/freeradius.service → /lib/systemd/system/freeradius.service. Setting up freeradius-utils (3.0.21+dfsg-2.2+deb11u1) ... Processing triggers for man-db (2.9.4-2) ... then I open journalctl -xe: journalctl -xe Subject: A stop job for unit freeradius.service has finished Defined-By: systemd Support: https://www.debian.org/support A stop job for unit freeradius.service has finished. The job identifier is 15156 and the job result is done. Jan 26 09:37:38 test systemd[1]: Starting FreeRADIUS multi-protocol policy server... Subject: A start job for unit freeradius.service has begun execution Defined-By: systemd Support: https://www.debian.org/support A start job for unit freeradius.service has begun execution. The job identifier is 15156. Jan 26 09:37:38 test freeradius[9025]: FreeRADIUS Version 3.0.21 Jan 26 09:37:38 test freeradius[9025]: Copyright (C) 1999-2019 The FreeRADIUS server project and contribut> Jan 26 09:37:38 test freeradius[9025]: There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A Jan 26 09:37:38 test freeradius[9025]: PARTICULAR PURPOSE Jan 26 09:37:38 test freeradius[9025]: You may redistribute copies of FreeRADIUS under the terms of the Jan 26 09:37:38 test freeradius[9025]: GNU General Public License Jan 26 09:37:38 test freeradius[9025]: For more information about these matters, see the file named COPYRI> Jan 26 09:37:38 test freeradius[9025]: Starting - reading configuration files ... Jan 26 09:37:38 test freeradius[9025]: Debug state unknown (cap_sys_ptrace capability not set) Jan 26 09:37:38 test freeradius[9025]: Creating attribute Unix-Group Jan 26 09:37:38 test freeradius[9025]: rlm_detail (auth_log): 'User-Password' suppressed, will not appear > Jan 26 09:37:38 test freeradius[9025]: rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rb> Jan 26 09:37:38 test freeradius[9025]: Please use tls_min_version and tls_max_version instead of disable_t> Jan 26 09:37:38 test freeradius[9025]: Please use tls_min_version and tls_max_version instead of disable_t> Jan 26 09:37:38 test freeradius[9025]: tls: Using cached TLS configuration from previous invocation Jan 26 09:37:38 test freeradius[9025]: tls: Using cached TLS configuration from previous invocation Jan 26 09:37:38 test freeradius[9025]: rlm_mschap (mschap): using internal authentication Jan 26 09:37:38 test freeradius[9025]: Ignoring "sql" (see raddb/mods-available/README.rst) Jan 26 09:37:38 test freeradius[9025]: Ignoring "ldap" (see raddb/mods-available/README.rst) Jan 26 09:37:38 test freeradius[9025]: # Skipping contents of 'if' as it is always 'false' -- /etc/freera> Jan 26 09:37:38 test freeradius[9025]: radiusd: #### Skipping IP addresses and Ports #### Jan 26 09:37:38 test freeradius[9025]: Configuration appears to be OK Jan 26 09:37:39 test systemd[1]: freeradius.service: Main process exited, code=exited, status=1/FAILURE Subject: Unit process exited Defined-By: systemd Support: https://www.debian.org/support An ExecStart= process belonging to unit freeradius.service has exited. The process' exit code is 'exited' and its exit status is 1. Jan 26 09:37:39 test systemd[1]: freeradius.service: Failed with result 'exit-code'. Subject: Unit failed Defined-By: systemd Support: https://www.debian.org/support The unit freeradius.service has entered the 'failed' state with result 'exit-code'. Jan 26 09:37:39 test systemd[1]: Failed to start FreeRADIUS multi-protocol policy server. Subject: A start job for unit freeradius.service has failed Defined-By: systemd Support: https://www.debian.org/support A start job for unit freeradius.service has finished with a failure. The job identifier is 15156 and the job result is failed. Sometimes after installation the error appears Process: 24003 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS -Cx -lstdout (code=exited, status=226/NAMESPACE) after uninstalling with apt purge freeradius / apt autoremove then I install freeradius after sometimes the freeradius server starts for a period of time. But after starting freeradius with command :systemctl start freeradius , the error appears sometimes again. OS : "Raspbian GNU/Linux 11 (bullseye) Do you have any idea why these errors could appear? Best Regards,Dumitru (Attached NotepadVersion.txt with output from command freeradius -X to avoid unreadable version) On Tuesday, January 23, 2024 at 12:55:34 PM GMT+1, Alan DeKok <aland@deployingradius.com> wrote: On Jan 23, 2024, at 4:03 AM, Dumitru via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote:
Below I place the debug output : radiusd -X 2>&1 | tee debugfileFreeRADIUS Version 3.0.21Copyright (C) 1999-2019 The FreeRADIUS server project and contributorsThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR APARTICULAR PURPOSEYou may redistribute copies of FreeRADIUS under the terms of theGNU General Public LicenseFor more information about these matters, see the file named COPYRIGHTStarting - reading configuration files ...including dictionary file /usr/share/freeradius/dictionaryincluding dictionary file /usr/share/freeradius/dictionary.dhcpincluding dictionary file /usr/share/freeradius/dictionary.vqpincluding dictionary file /etc/freeradius/3.0/dictionaryincluding configuration file /etc/freeradius/3.0/radiusd.confincluding configuration file /etc/freeradius/3.0/proxy.confincluding configuration file /etc/freeradius/3.0/clients.confincluding files in directory
Please post a version with correct line wrapping. This version is essentially unreadable.
Ready to process requests
i.e. no errors. Is there a problem you're running into? Do you have a question? Alan DeKok.
On Jan 26, 2024, at 4:05 AM, Dumitru via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote:
Hello Alan, after installing the freeradius server, the Process error appears: 23574 ExecStart=/usr/sbin/freeradius -f $FREERADIUS_OPTIONS (code=exited, status=1/FAILURE). :
This is end of output afther installation:
Generating DH parameters, 1024 bit long safe prime, generator 2 This is going to take a long time ..................................+..............+.......................................+...........+......+....................................++*++*++*++*++* Setting up freeradius (3.0.21+dfsg-2.2+deb11u1) ... update-rc.d: warning: start and stop actions are no longer supported; falling back to defaults Job for freeradius.service failed because the control process exited with error code.
It probably took too long to start. You can run it in debug mode as "root" to get the various default certificates created. After that, systemctl will work. Alan DeKok.
participants (2)
-
Alan DeKok -
Dumitru