Please disregard this thread. I have solve my problem. Setup (as you 
probably guessed) mistake.

Bill

On 11/9/2012 1:20 PM, Bill Schoolfield wrote:
> Any help on this? I have deleted the db.ippool and db.ipindex files,
> restarted the server... But I get the same result. Different ip but from
> a private address range.
>
> Bill
>
>
> On 11/9/2012 12:31 PM, Bill Schoolfield wrote:
>> Hi
>>
>> I'm trying to get dynamic ip allocation working. I ran a test via
>> radtest:
>>
>>> [root@freerad raddb]# radtest billtest2 "this#x7g" localhost 0 mysecret
>>> Sending Access-Request of id 53 to 192.168.111.55 port 1812
>>>         User-Name = "billtest2"
>>>         User-Password = "this#x7g"
>>>         NAS-IP-Address = 192.168.111.55
>>>         NAS-Port = 0
>>>         Message-Authenticator = 0x00000000000000000000000000000000
>>> rad_recv: Access-Accept packet from host 192.168.111.55 port 1812,
>>> id=53, length=32
>>>         Framed-IP-Address = 192.168.1.215
>>>         Framed-IP-Netmask = 255.255.255.0
>>
>> and I'm getting a IP that's not from my pool. Here is the pertinent
>> section in radiud.conf:
>>
>>
>>> ippool main_pool {
>>>         range-start = 204.101.13.2
>>>         range-stop = 204.101.13.252
>>>         netmask = 255.255.255.0
>>> }
>>
>> which is within the modules section. Database wise the billtest2 user is
>> a user that belongs to a group linked to this pool.
>>
>> The default site file has this pool in the post auth section.
>>
>> Below is the radius log? What am I missing?
>>
>> Bill
>>
>>
>>> /usr/sbin/radiusd -X
>>> FreeRADIUS Version 2.1.10, for host x86_64-redhat-linux-gnu, built on
>>> Mar 25 2011 at 10:54:38
>>> Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>> PARTICULAR PURPOSE.
>>> You may redistribute copies of FreeRADIUS under the terms of the
>>> GNU General Public License v2.
>>> Starting - reading configuration files ...
>>> including configuration file /etc/raddb/radiusd.conf
>>> including configuration file /etc/raddb/proxy.conf
>>> including configuration file /etc/raddb/clients.conf
>>> including files in directory /etc/raddb/modules/
>>> including configuration file /etc/raddb/modules/realm
>>> including configuration file /etc/raddb/modules/detail
>>> including configuration file /etc/raddb/modules/unix
>>> including configuration file /etc/raddb/modules/mac2ip
>>> including configuration file /etc/raddb/modules/pam
>>> including configuration file /etc/raddb/modules/logintime
>>> including configuration file /etc/raddb/modules/perl
>>> including configuration file /etc/raddb/modules/detail.log
>>> including configuration file /etc/raddb/modules/mac2vlan
>>> including configuration file /etc/raddb/modules/radutmp
>>> including configuration file /etc/raddb/modules/etc_group
>>> including configuration file /etc/raddb/modules/wimax
>>> including configuration file /etc/raddb/modules/ntlm_auth
>>> including configuration file /etc/raddb/modules/preprocess
>>> including configuration file /etc/raddb/modules/files
>>> including configuration file /etc/raddb/modules/attr_rewrite
>>> including configuration file /etc/raddb/modules/attr_filter
>>> including configuration file /etc/raddb/modules/always
>>> including configuration file /etc/raddb/modules/sql_log
>>> including configuration file /etc/raddb/modules/counter
>>> including configuration file
>>> /etc/raddb/modules/sqlcounter_expire_on_login
>>> including configuration file /etc/raddb/modules/policy
>>> including configuration file /etc/raddb/modules/expr
>>> including configuration file /etc/raddb/modules/cui
>>> including configuration file /etc/raddb/modules/linelog
>>> including configuration file /etc/raddb/modules/opendirectory
>>> including configuration file /etc/raddb/modules/chap
>>> including configuration file /etc/raddb/modules/smbpasswd
>>> including configuration file /etc/raddb/modules/passwd
>>> including configuration file /etc/raddb/modules/otp
>>> including configuration file /etc/raddb/modules/detail.example.com
>>> including configuration file /etc/raddb/modules/relay_detail
>>> including configuration file /etc/raddb/modules/echo
>>> including configuration file /etc/raddb/modules/smsotp
>>> including configuration file /etc/raddb/modules/inner-eap
>>> including configuration file /etc/raddb/modules/pap
>>> including configuration file /etc/raddb/modules/exec
>>> including configuration file /etc/raddb/modules/mschap
>>> including configuration file /etc/raddb/modules/acct_unique
>>> including configuration file /etc/raddb/modules/sradutmp
>>> including configuration file /etc/raddb/modules/checkval
>>> including configuration file /etc/raddb/modules/ippool
>>> including configuration file /etc/raddb/modules/digest
>>> including configuration file /etc/raddb/modules/expiration
>>> including configuration file /etc/raddb/modules/dynamic_clients
>>> including configuration file /etc/raddb/eap.conf
>>> including configuration file /etc/raddb/sql.conf
>>> including configuration file /etc/raddb/sql/mysql/dialup.conf
>>> including configuration file /etc/raddb/policy.conf
>>> including files in directory /etc/raddb/sites-enabled/
>>> including configuration file /etc/raddb/sites-enabled/default.orig
>>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>>> including configuration file /etc/raddb/sites-enabled/control-socket
>>> including configuration file
>>> /etc/raddb/sites-enabled/copy-acct-to-home-server
>>> including configuration file /etc/raddb/sites-enabled/default
>>> main {
>>>         user = "radiusd"
>>>         group = "radiusd"
>>>         allow_core_dumps = no
>>> }
>>> including dictionary file /etc/raddb/dictionary
>>> main {
>>>         prefix = "/usr"
>>>         localstatedir = "/var"
>>>         logdir = "/var/log/radius"
>>>         libdir = "/usr/lib64/freeradius"
>>>         radacctdir = "/var/log/radius/radacct"
>>>         hostname_lookups = no
>>>         max_request_time = 30
>>>         cleanup_delay = 5
>>>         max_requests = 1024
>>>         pidfile = "/var/run/radiusd/radiusd.pid"
>>>         checkrad = "/usr/sbin/checkrad"
>>>         debug_level = 0
>>>         proxy_requests = yes
>>>  log {
>>>         stripped_names = no
>>>         auth = yes
>>>         auth_badpass = no
>>>         auth_goodpass = no
>>>  }
>>>  security {
>>>         max_attributes = 200
>>>         reject_delay = 1
>>>         status_server = yes
>>>  }
>>> }
>>> radiusd: #### Loading Realms and Home Servers ####
>>>  proxy server {
>>>         retry_delay = 5
>>>         retry_count = 3
>>>         default_fallback = no
>>>         dead_time = 120
>>>         wake_all_if_all_dead = no
>>>  }
>>>  home_server localhost {
>>>         ipaddr = 127.0.0.1
>>>         port = 1812
>>>         type = "auth"
>>>         secret = "testing123"
>>>         response_window = 20
>>>         max_outstanding = 65536
>>>         require_message_authenticator = yes
>>>         zombie_period = 40
>>>         status_check = "status-server"
>>>         ping_interval = 30
>>>         check_interval = 30
>>>         num_answers_to_alive = 3
>>>         num_pings_to_alive = 3
>>>         revive_interval = 120
>>>         status_check_timeout = 4
>>>         irt = 2
>>>         mrt = 16
>>>         mrc = 5
>>>         mrd = 30
>>>  }
>>>  home_server_pool my_auth_failover {
>>>         type = fail-over
>>>         home_server = localhost
>>>  }
>>>  realm example.com {
>>>         auth_pool = my_auth_failover
>>>  }
>>>  home_server myhomeserver {
>>>         ipaddr = 192.168.111.57
>>>         port = 1813
>>>         type = "acct"
>>>         secret = "testing123"
>>>         response_window = 30
>>>         max_outstanding = 65536
>>>         zombie_period = 40
>>>         status_check = "none"
>>>         ping_interval = 30
>>>         check_interval = 30
>>>         num_answers_to_alive = 3
>>>         num_pings_to_alive = 3
>>>         revive_interval = 300
>>>         status_check_timeout = 4
>>>         irt = 2
>>>         mrt = 16
>>>         mrc = 5
>>>         mrd = 30
>>>  }
>>>  home_server_pool poolit {
>>>         type = fail-over
>>>         home_server = myhomeserver
>>>  }
>>>  realm home_realm {
>>>         acct_pool = poolit
>>>  }
>>>  realm LOCAL {
>>>  }
>>> radiusd: #### Loading Clients ####
>>>  client localhost {
>>>         ipaddr = 127.0.0.1
>>>         require_message_authenticator = no
>>>         secret = "testing123"
>>>         nastype = "other"
>>>  }
>>>  client 192.168.5.73 {
>>>         require_message_authenticator = no
>>>         secret = "mysecret"
>>>         shortname = "testbypeter"
>>>         nastype = "other"
>>>  }
>>> radiusd: #### Instantiating modules ####
>>>  instantiate {
>>>  Module: Linked to module rlm_exec
>>>  Module: Instantiating module "exec" from file /etc/raddb/modules/exec
>>>   exec {
>>>         wait = no
>>>         input_pairs = "request"
>>>         shell_escape = yes
>>>   }
>>>  Module: Linked to module rlm_expr
>>>  Module: Instantiating module "expr" from file /etc/raddb/modules/expr
>>>  Module: Linked to module rlm_expiration
>>>  Module: Instantiating module "expiration" from file
>>> /etc/raddb/modules/expiration
>>>   expiration {
>>>         reply-message = "Password Has Expired  "
>>>   }
>>>  Module: Linked to module rlm_logintime
>>>  Module: Instantiating module "logintime" from file
>>> /etc/raddb/modules/logintime
>>>   logintime {
>>>         reply-message = "You are calling outside your allowed
>>> timespan  "
>>>         minimum-timeout = 60
>>>   }
>>>  }
>>> radiusd: #### Loading Virtual Servers ####
>>> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>>>  modules {
>>>  Module: Checking authenticate {...} for more modules to load
>>>  Module: Linked to module rlm_pap
>>>  Module: Instantiating module "pap" from file /etc/raddb/modules/pap
>>>   pap {
>>>         encryption_scheme = "auto"
>>>         auto_header = no
>>>   }
>>>  Module: Linked to module rlm_chap
>>>  Module: Instantiating module "chap" from file /etc/raddb/modules/chap
>>>  Module: Linked to module rlm_mschap
>>>  Module: Instantiating module "mschap" from file
>>> /etc/raddb/modules/mschap
>>>   mschap {
>>>         use_mppe = yes
>>>         require_encryption = no
>>>         require_strong = no
>>>         with_ntdomain_hack = no
>>>   }
>>>  Module: Linked to module rlm_unix
>>>  Module: Instantiating module "unix" from file /etc/raddb/modules/unix
>>>   unix {
>>>         radwtmp = "/var/log/radius/radwtmp"
>>>   }
>>>  Module: Linked to module rlm_eap
>>>  Module: Instantiating module "eap" from file /etc/raddb/eap.conf
>>>   eap {
>>>         default_eap_type = "md5"
>>>         timer_expire = 60
>>>         ignore_unknown_eap_types = no
>>>         cisco_accounting_username_bug = no
>>>         max_sessions = 4096
>>>   }
>>>  Module: Linked to sub-module rlm_eap_md5
>>>  Module: Instantiating eap-md5
>>>  Module: Linked to sub-module rlm_eap_leap
>>>  Module: Instantiating eap-leap
>>>  Module: Linked to sub-module rlm_eap_gtc
>>>  Module: Instantiating eap-gtc
>>>    gtc {
>>>         challenge = "Password: "
>>>         auth_type = "PAP"
>>>    }
>>>  Module: Linked to sub-module rlm_eap_tls
>>>  Module: Instantiating eap-tls
>>>    tls {
>>>         rsa_key_exchange = no
>>>         dh_key_exchange = yes
>>>         rsa_key_length = 512
>>>         dh_key_length = 512
>>>         verify_depth = 0
>>>         CA_path = "/etc/raddb/certs"
>>>         pem_file_type = yes
>>>         private_key_file = "/etc/raddb/certs/server.pem"
>>>         certificate_file = "/etc/raddb/certs/server.pem"
>>>         CA_file = "/etc/raddb/certs/ca.pem"
>>>         private_key_password = "whatever"
>>>         dh_file = "/etc/raddb/certs/dh"
>>>         random_file = "/etc/raddb/certs/random"
>>>         fragment_size = 1024
>>>         include_length = yes
>>>         check_crl = no
>>>         cipher_list = "DEFAULT"
>>>     cache {
>>>         enable = no
>>>         lifetime = 24
>>>         max_entries = 255
>>>     }
>>>     verify {
>>>     }
>>>    }
>>>  Module: Linked to sub-module rlm_eap_ttls
>>>  Module: Instantiating eap-ttls
>>>    ttls {
>>>         default_eap_type = "md5"
>>>         copy_request_to_tunnel = no
>>>         use_tunneled_reply = no
>>>         virtual_server = "inner-tunnel"
>>>         include_length = yes
>>>    }
>>>  Module: Linked to sub-module rlm_eap_peap
>>>  Module: Instantiating eap-peap
>>>    peap {
>>>         default_eap_type = "mschapv2"
>>>         copy_request_to_tunnel = no
>>>         use_tunneled_reply = no
>>>         proxy_tunneled_request_as_eap = yes
>>>         virtual_server = "inner-tunnel"
>>>    }
>>>  Module: Linked to sub-module rlm_eap_mschapv2
>>>  Module: Instantiating eap-mschapv2
>>>    mschapv2 {
>>>         with_ntdomain_hack = no
>>>    }
>>>  Module: Checking authorize {...} for more modules to load
>>>  Module: Linked to module rlm_realm
>>>  Module: Instantiating module "suffix" from file
>>> /etc/raddb/modules/realm
>>>   realm suffix {
>>>         format = "suffix"
>>>         delimiter = "@"
>>>         ignore_default = no
>>>         ignore_null = no
>>>   }
>>>  Module: Linked to module rlm_files
>>>  Module: Instantiating module "files" from file /etc/raddb/modules/files
>>>   files {
>>>         usersfile = "/etc/raddb/users"
>>>         acctusersfile = "/etc/raddb/acct_users"
>>>         preproxy_usersfile = "/etc/raddb/preproxy_users"
>>>         compat = "no"
>>>   }
>>>  Module: Checking session {...} for more modules to load
>>>  Module: Linked to module rlm_radutmp
>>>  Module: Instantiating module "radutmp" from file
>>> /etc/raddb/modules/radutmp
>>>   radutmp {
>>>         filename = "/var/log/radius/radutmp"
>>>         username = "%{User-Name}"
>>>         case_sensitive = yes
>>>         check_with_nas = yes
>>>         perm = 384
>>>         callerid = yes
>>>   }
>>>  Module: Checking post-proxy {...} for more modules to load
>>>  Module: Checking post-auth {...} for more modules to load
>>>  Module: Linked to module rlm_attr_filter
>>>  Module: Instantiating module "attr_filter.access_reject" from file
>>> /etc/raddb/modules/attr_filter
>>>   attr_filter attr_filter.access_reject {
>>>         attrsfile = "/etc/raddb/attrs.access_reject"
>>>         key = "%{User-Name}"
>>>   }
>>>  } # modules
>>> } # server
>>> server copy-acct-to-home-server { # from file
>>> /etc/raddb/sites-enabled/copy-acct-to-home-server
>>>  modules {
>>>  Module: Checking preacct {...} for more modules to load
>>>  Module: Linked to module rlm_preprocess
>>>  Module: Instantiating module "preprocess" from file
>>> /etc/raddb/modules/preprocess
>>>   preprocess {
>>>         huntgroups = "/etc/raddb/huntgroups"
>>>         hints = "/etc/raddb/hints"
>>>         with_ascend_hack = no
>>>         ascend_channels_per_line = 23
>>>         with_ntdomain_hack = no
>>>         with_specialix_jetstream_hack = no
>>>         with_cisco_vsa_hack = no
>>>         with_alvarion_vsa_hack = no
>>>   }
>>>  Module: Checking accounting {...} for more modules to load
>>>  Module: Linked to module rlm_always
>>>  Module: Instantiating module "ok" from file /etc/raddb/modules/always
>>>   always ok {
>>>         rcode = "ok"
>>>         simulcount = 0
>>>         mpp = no
>>>   }
>>>  } # modules
>>> } # server
>>> server { # from file /etc/raddb/radiusd.conf
>>>  modules {
>>>  Module: Checking authenticate {...} for more modules to load
>>>  Module: Linked to module rlm_digest
>>>  Module: Instantiating module "digest" from file
>>> /etc/raddb/modules/digest
>>>  Module: Checking authorize {...} for more modules to load
>>>  Module: Linked to module rlm_sql
>>>  Module: Instantiating module "sql" from file /etc/raddb/sql.conf
>>>   sql {
>>>         driver = "rlm_sql_mysql"
>>>         server = "localhost"
>>>         port = ""
>>>         login = "radius"
>>>         password = "radpass"
>>>         radius_db = "radius"
>>>         read_groups = yes
>>>         sqltrace = no
>>>         sqltracefile = "/var/log/radius/sqltrace.sql"
>>>         readclients = yes
>>>         deletestalesessions = yes
>>>         num_sql_socks = 5
>>>         lifetime = 0
>>>         max_queries = 0
>>>         sql_user_name = "%{User-Name}"
>>>         default_user_profile = ""
>>>         nas_query = "SELECT id, nasname, shortname, type, secret,
>>> server FROM nas"
>>>         authorize_check_query = "SELECT id, username, attribute,
>>> value, op           FROM radcheck           WHERE username =
>>> '%{SQL-User-Name}'           ORDER BY id"
>>>         authorize_reply_query = "SELECT id, username, attribute,
>>> value, op           FROM radreply           WHERE username =
>>> '%{SQL-User-Name}'           ORDER BY id"
>>>         authorize_group_check_query = "SELECT id, groupname,
>>> attribute,           Value, op           FROM radgroupcheck
>>> WHERE groupname = '%{Sql-Group}'           ORDER BY id"
>>>         authorize_group_reply_query = "SELECT id, groupname,
>>> attribute,           value, op           FROM radgroupreply
>>> WHERE groupname = '%{Sql-Group}'           ORDER BY id"
>>>         accounting_onoff_query = "          UPDATE radacct
>>> SET              acctstoptime       =  '%S',
>>> acctsessiontime    =  unix_timestamp('%S')
>>> -
>>> unix_timestamp(acctstarttime),              acctterminatecause =
>>> '%{Acct-Terminate-Cause}',              acctstopdelay      =
>>> %{%{Acct-Delay-Time}:-0}           WHERE acctstoptime IS
>>> NULL           AND nasipaddress      =  '%{NAS-IP-Address}'
>>> AND acctstarttime     <= '%S'"
>>>         accounting_update_query = "           UPDATE radacct
>>> SET              framedipaddress =
>>> '%{Framed-IP-Address}',              acctsessiontime     =
>>> '%{Acct-Session-Time}',              acctinputoctets     =
>>> '%{%{Acct-Input-Gigawords}:-0}'  << 32
>>> |
>>> '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets    =
>>> '%{%{Acct-Output-Gigawords}:-0}' << 32
>>> |
>>> '%{%{Acct-Output-Octets}:-0}'           WHERE acctsessionid =
>>> '%{Acct-Session-Id}'           AND username        =
>>> '%{SQL-User-Name}'           AND nasipaddress    = '%{NAS-IP-Address}'"
>>>         accounting_update_query_alt = "           INSERT INTO
>>> radacct             (acctsessionid,    acctuniqueid,
>>> username,              realm,            nasipaddress,
>>> nasportid,              nasporttype,      acctstarttime,
>>> acctsessiontime,              acctauthentic,    connectinfo_start,
>>> acctinputoctets,              acctoutputoctets, calledstationid,
>>> callingstationid,              servicetype,      framedprotocol,
>>> framedipaddress,              acctstartdelay,
>>> xascendsessionsvrkey)           VALUES
>>> ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
>>> '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
>>> '%{NAS-Port}',              '%{NAS-Port-Type}',
>>> DATE_SUB('%S',                       INTERVAL
>>> (%{%{Acct-Session-Time}:-0} +
>>> %{%{Acct-Delay-Time}:-0}) SECOND),
>>> '%{Acct-Session-Time}',              '%{Acct-Authentic}',
>>> '',              '%{%{Acct-Inp!
>> ut-Gigaw
>> ords}:-0}' << 32 |
>> '%{%{Acct-Input-Octets}:-0}',
>> '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}',
>> '%{Calling-Station-Id}',              '%{Service-Type}',
>> '%{Framed-Protocol}',              '%{Framed-IP-Address}',
>> '0', '%{X-Ascend-Session-Svr-Key}')"
>>>         accounting_start_query = "           INSERT INTO
>>> radacct             (acctsessionid,    acctuniqueid,
>>> username,              realm,            nasipaddress,
>>> nasportid,              nasporttype,      acctstarttime,
>>> acctstoptime,              acctsessiontime,  acctauthentic,
>>> connectinfo_start,              connectinfo_stop, acctinputoctets,
>>> acctoutputoctets,              calledstationid,  callingstationid,
>>> acctterminatecause,              servicetype,      framedprotocol,
>>> framedipaddress,              acctstartdelay,   acctstopdelay,
>>> xascendsessionsvrkey)           VALUES
>>> ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
>>> '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
>>> '%{NAS-Port}',              '%{NAS-Port-Type}', '%S',
>>> NULL,              '0', '%{Acct-Authentic}',
>>> '%{Connect-Info}',              '', '0', '0',
>>> '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
>>> '%{Service-Type!
>> }', '%{F
>> ramed-Protocol}', '%{Framed-IP-Address}',
>> '%{%{Acct-Delay-Time}:-0}', '0', '%{X-Ascend-Session-Svr-Key}')"
>>>         accounting_start_query_alt = "           UPDATE radacct
>>> SET              acctstarttime     = '%S',
>>> acctstartdelay    = '%{%{Acct-Delay-Time}:-0}',
>>> connectinfo_start = '%{Connect-Info}'           WHERE acctsessionid  =
>>> '%{Acct-Session-Id}'           AND username         =
>>> '%{SQL-User-Name}'           AND nasipaddress     = '%{NAS-IP-Address}'"
>>>         accounting_stop_query = "           UPDATE radacct
>>> SET              acctstoptime       = '%S',
>>> acctsessiontime    = '%{Acct-Session-Time}',
>>> acctinputoctets    = '%{%{Acct-Input-Gigawords}:-0}' << 32
>>> |
>>> '%{%{Acct-Input-Octets}:-0}',              acctoutputoctets   =
>>> '%{%{Acct-Output-Gigawords}:-0}' << 32
>>> |
>>> '%{%{Acct-Output-Octets}:-0}',              acctterminatecause =
>>> '%{Acct-Terminate-Cause}',              acctstopdelay      =
>>> '%{%{Acct-Delay-Time}:-0}',              connectinfo_stop   =
>>> '%{Connect-Info}'           WHERE acctsessionid   =
>>> '%{Acct-Session-Id}'           AND username          =
>>> '%{SQL-User-Name}'           AND nasipaddress      =
>>> '%{NAS-IP-Address}'"
>>>         accounting_stop_query_alt = "           INSERT INTO
>>> radacct             (acctsessionid, acctuniqueid,
>>> username,              realm, nasipaddress, nasportid,
>>> nasporttype, acctstarttime, acctstoptime,
>>> acctsessiontime, acctauthentic, connectinfo_start,
>>> connectinfo_stop, acctinputoctets, acctoutputoctets,
>>> calledstationid, callingstationid, acctterminatecause,
>>> servicetype, framedprotocol, framedipaddress,
>>> acctstartdelay, acctstopdelay)           VALUES
>>> ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
>>> '%{SQL-User-Name}',              '%{Realm}', '%{NAS-IP-Address}',
>>> '%{NAS-Port}',              '%{NAS-Port-Type}',
>>> DATE_SUB('%S',                  INTERVAL (%{%{Acct-Session-Time}:-0}
>>> +                  %{%{Acct-Delay-Time}:-0}) SECOND),
>>> '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
>>> '%{Connect-Info}',              '%{%{Acct!
>> -Input-G
>> igawords}:-0}' << 32 |
>> '%{%{Acct-Input-Octets}:-0}',
>> '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}',              '%{Called-Station-Id}',
>> '%{Calling-Station-Id}',
>> '%{Acct-Terminate-Cause}',              '%{Service-Type}',
>> '%{Framed-Protocol}', '%{Framed-IP-Address}',              '0',
>> '%{%{Acct-Delay-Time}:-0}')"
>>>         group_membership_query = "SELECT groupname           FROM
>>> radusergroup           WHERE username = '%{SQL-User-Name}'
>>> ORDER BY priority"
>>>         connect_failure_retry_delay = 60
>>>         simul_count_query = ""
>>>         simul_verify_query = "SELECT radacctid, acctsessionid,
>>> username,                                nasipaddress, nasportid,
>>> framedipaddress,                                callingstationid,
>>> framedprotocol                                FROM
>>> radacct                                WHERE username =
>>> '%{SQL-User-Name}'                                AND acctstoptime IS
>>> NULL"
>>>         postauth_query = "INSERT INTO
>>> radpostauth                           (username, pass, reply,
>>> authdate)                           VALUES (
>>> '%{User-Name}',
>>> '%{%{User-Password}:-%{Chap-Password}}',
>>> '%{reply:Packet-Type}', '%S')"
>>>         safe-characters =
>>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>>>   }
>>> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
>>> linked
>>> rlm_sql (sql): Attempting to connect to radius@localhost:/radius
>>> rlm_sql (sql): starting 0
>>> rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
>>> rlm_sql_mysql: Starting connect to MySQL server for #0
>>> rlm_sql (sql): Connected new DB handle, #0
>>> rlm_sql (sql): starting 1
>>> rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
>>> rlm_sql_mysql: Starting connect to MySQL server for #1
>>> rlm_sql (sql): Connected new DB handle, #1
>>> rlm_sql (sql): starting 2
>>> rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
>>> rlm_sql_mysql: Starting connect to MySQL server for #2
>>> rlm_sql (sql): Connected new DB handle, #2
>>> rlm_sql (sql): starting 3
>>> rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
>>> rlm_sql_mysql: Starting connect to MySQL server for #3
>>> rlm_sql (sql): Connected new DB handle, #3
>>> rlm_sql (sql): starting 4
>>> rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
>>> rlm_sql_mysql: Starting connect to MySQL server for #4
>>> rlm_sql (sql): Connected new DB handle, #4
>>> rlm_sql (sql): Processing generate_sql_clients
>>> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
>>> shortname, type, secret, server FROM nas
>>> rlm_sql (sql): Reserving sql socket id: 4
>>> rlm_sql (sql): Read entry
>>> nasname=192.168.111.55,shortname=localhost,secret=mysecret
>>> rlm_sql (sql): Adding client 192.168.111.55 (localhost, server=<none>)
>>> to clients list
>>> rlm_sql (sql): Read entry
>>> nasname=204.101.13.1,shortname=ERX2,secret=juniper
>>> rlm_sql (sql): Adding client 204.101.13.1 (ERX2, server=<none>) to
>>> clients list
>>> rlm_sql (sql): Read entry
>>> nasname=192.168.5.66,shortname=testcomp,secret=mysecret
>>> rlm_sql (sql): Adding client 192.168.5.66 (testcomp, server=<none>) to
>>> clients list
>>> rlm_sql (sql): Read entry
>>> nasname=204.101.13.2,shortname=ERX01,secret=juniper-erx01
>>> rlm_sql (sql): Adding client 204.101.13.2 (ERX01, server=<none>) to
>>> clients list
>>> rlm_sql (sql): Released sql socket id: 4
>>>  Module: Checking preacct {...} for more modules to load
>>>  Module: Linked to module rlm_acct_unique
>>>  Module: Instantiating module "acct_unique" from file
>>> /etc/raddb/modules/acct_unique
>>>   acct_unique {
>>>         key = "User-Name, Acct-Session-Id, NAS-IP-Address,
>>> Client-IP-Address, NAS-Port"
>>>   }
>>>  Module: Checking accounting {...} for more modules to load
>>>  Module: Linked to module rlm_detail
>>>  Module: Instantiating module "detail" from file
>>> /etc/raddb/modules/detail
>>>   detail {
>>>         detailfile =
>>> "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
>>>         header = "%t"
>>>         detailperm = 384
>>>         dirperm = 493
>>>         locking = no
>>>         log_packet_header = no
>>>   }
>>>  Module: Instantiating module "relay_detail" from file
>>> /etc/raddb/modules/relay_detail
>>>   detail relay_detail {
>>>         detailfile = "/var/log/radius/radacct/relay-detail"
>>>         header = "%t"
>>>         detailperm = 384
>>>         dirperm = 493
>>>         locking = no
>>>         log_packet_header = no
>>>   }
>>>  Module: Linked to module rlm_ippool
>>>  Module: Instantiating module "main_pool" from file
>>> /etc/raddb/modules/ippool
>>>   ippool main_pool {
>>>         session-db = "/etc/raddb/db.ippool"
>>>         ip-index = "/etc/raddb/db.ipindex"
>>>         key = "%{NAS-IP-Address} %{NAS-Port}"
>>>         range-start = 192.168.1.1
>>>         range-stop = 192.168.3.254
>>>         netmask = 255.255.255.0
>>>         cache-size = 800
>>>         override = no
>>>         maximum-timeout = 0
>>>   }
>>>  Module: Instantiating module "attr_filter.accounting_response" from
>>> file /etc/raddb/modules/attr_filter
>>>   attr_filter attr_filter.accounting_response {
>>>         attrsfile = "/etc/raddb/attrs.accounting_response"
>>>         key = "%{User-Name}"
>>>   }
>>>  Module: Checking session {...} for more modules to load
>>>  Module: Checking post-proxy {...} for more modules to load
>>>  Module: Checking post-auth {...} for more modules to load
>>>  } # modules
>>> } # server
>>> radiusd: #### Opening IP addresses and Ports ####
>>> listen {
>>>         type = "auth"
>>>         ipaddr = *
>>>         port = 0
>>> }
>>> listen {
>>>         type = "acct"
>>>         ipaddr = *
>>>         port = 0
>>> }
>>> listen {
>>>         type = "control"
>>>  listen {
>>>         socket = "/var/run/radiusd/radiusd.sock"
>>>  }
>>> }
>>> listen {
>>>         type = "auth"
>>>         ipaddr = 127.0.0.1
>>>         port = 18120
>>> }
>>> listen {
>>>         type = "detail"
>>>   listen {
>>>         filename = "/var/log/radius/radacct/relay-detail"
>>>         load_factor = 10
>>>         poll_interval = 1
>>>         retry_interval = 30
>>>   }
>>> }
>>> Listening on authentication address * port 1812
>>> Listening on accounting address * port 1813
>>> Listening on command file /var/run/radiusd/radiusd.sock
>>> Listening on authentication address 127.0.0.1 port 18120 as server
>>> inner-tunnel
>>> Listening on detail file /var/log/radius/radacct/relay-detail as
>>> server copy-acct-to-home-server
>>> Detail listener /var/log/radius/radacct/relay-detail state unopened
>>> signalled 0 waiting 1.000000 sec
>>> Listening on proxy address * port 1814
>>> Waking up in 0.9 seconds.
>>> Polling for detail file /var/log/radius/radacct/relay-detail
>>> Detail listener /var/log/radius/radacct/relay-detail state unopened
>>> signalled 0 waiting 1.048359 sec
>>> Waking up in 1.0 seconds.
>>> Polling for detail file /var/log/radius/radacct/relay-detail
>>> Detail listener /var/log/radius/radacct/relay-detail state unopened
>>> signalled 0 waiting 1.088540 sec
>>> Waking up in 1.0 seconds.
>>> Polling for detail file /var/log/radius/radacct/relay-detail
>>> Detail listener /var/log/radius/radacct/relay-detail state unopened
>>> signalled 0 waiting 0.924103 sec
>>> Waking up in 0.9 seconds.
>>> Polling for detail file /var/log/radius/radacct/relay-detail
>>> Detail listener /var/log/radius/radacct/relay-detail state unopened
>>> signalled 0 waiting 1.058053 sec
>>> Waking up in 1.0 seconds.
>>> rad_recv: Access-Request packet from host 192.168.111.55 port 47873,
>>> id=53, length=79
>>>         User-Name = "billtest2"
>>>         User-Password = "this#x7g"
>>>         NAS-IP-Address = 192.168.111.55
>>>         NAS-Port = 0
>>>         Message-Authenticator = 0x21fd7bff584e72ed67fa7b6eda583d9d
>>> # Executing section authorize from file
>>> /etc/raddb/sites-enabled/default.orig
>>> +- entering group authorize {...}
>>> ++[preprocess] returns ok
>>> ++[chap] returns noop
>>> ++[mschap] returns noop
>>> ++[digest] returns noop
>>> [suffix] No '@' in User-Name = "billtest2", looking up realm NULL
>>> [suffix] No such realm "NULL"
>>> ++[suffix] returns noop
>>> [eap] No EAP-Message, not doing EAP
>>> ++[eap] returns noop
>>> ++[files] returns noop
>>> [sql]   expand: %{User-Name} -> billtest2
>>> [sql] sql_set_user escaped user --> 'billtest2'
>>> rlm_sql (sql): Reserving sql socket id: 3
>>> [sql]   expand: SELECT id, username, attribute, value, op
>>> FROM radcheck           WHERE username = '%{SQL-User-Name}'
>>> ORDER BY id -> SELECT id, username, attribute, value, op
>>> FROM radcheck           WHERE username = 'billtest2'           ORDER
>>> BY id
>>> [sql] User found in radcheck table
>>> [sql]   expand: SELECT id, username, attribute, value, op
>>> FROM radreply           WHERE username = '%{SQL-User-Name}'
>>> ORDER BY id -> SELECT id, username, attribute, value, op
>>> FROM radreply           WHERE username = 'billtest2'           ORDER
>>> BY id
>>> [sql]   expand: SELECT groupname           FROM radusergroup
>>> WHERE username = '%{SQL-User-Name}'           ORDER BY priority ->
>>> SELECT groupname           FROM radusergroup           WHERE username
>>> = 'billtest2'           ORDER BY priority
>>> [sql]   expand: SELECT id, groupname, attribute,           Value,
>>> op           FROM radgroupcheck           WHERE groupname =
>>> '%{Sql-Group}'           ORDER BY id -> SELECT id, groupname,
>>> attribute,           Value, op           FROM radgroupcheck
>>> WHERE groupname = 'dynamic'           ORDER BY id
>>> [sql] User found in group dynamic
>>> [sql]   expand: SELECT id, groupname, attribute,           value,
>>> op           FROM radgroupreply           WHERE groupname =
>>> '%{Sql-Group}'           ORDER BY id -> SELECT id, groupname,
>>> attribute,           value, op           FROM radgroupreply
>>> WHERE groupname = 'dynamic'           ORDER BY id
>>> rlm_sql (sql): Released sql socket id: 3
>>> ++[sql] returns ok
>>> ++[expiration] returns noop
>>> ++[logintime] returns noop
>>> ++[pap] returns updated
>>> Found Auth-Type = PAP
>>> # Executing group from file /etc/raddb/sites-enabled/default.orig
>>> +- entering group PAP {...}
>>> [pap] login attempt with password "this#x7g"
>>> [pap] Using clear text password "this#x7g"
>>> [pap] User authenticated successfully
>>> ++[pap] returns ok
>>> Login OK: [billtest2] (from client localhost port 0)
>>> # Executing section post-auth from file
>>> /etc/raddb/sites-enabled/default.orig
>>> +- entering group post-auth {...}
>>> [main_pool]     expand: %{NAS-IP-Address} %{NAS-Port} ->
>>> 192.168.111.55 0
>>> [main_pool] MD5 on 'key' directive maps to:
>>> d3bc3a5505bb6cb4c21fbfb7e218aad6
>>> [main_pool] Searching for an entry for key:
>>> 'd3bc3a5505bb6cb4c21fbfb7e218aad6'
>>> [main_pool] Found a stale entry for ip: 192.168.1.43
>>> [main_pool] num: 0
>>> rlm_ippool: Allocating ip to key: 'd3bc3a5505bb6cb4c21fbfb7e218aad6'
>>> [main_pool] num: 1
>>> [main_pool] Allocated ip 192.168.1.215 to client key:
>>> d3bc3a5505bb6cb4c21fbfb7e218aad6
>>> ++[main_pool] returns ok
>>> ++[exec] returns noop
>>> Sending Access-Accept of id 53 to 192.168.111.55 port 47873
>>>         Framed-IP-Address = 192.168.1.215
>>>         Framed-IP-Netmask = 255.255.255.0
>>> Finished request 0.
>>> Going to the next request
>>> Waking up in 0.3 seconds.
>>> Polling for detail file /var/log/radius/radacct/relay-detail
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html