Hi Thanks for the response. I am using free RADIUS version 1.1.7.I just require MAC authentication alone. Is anything wrong in the 'users' file NAS will support the VSA in this case. Vendor has given the following details Network Access Server Vendor- (Code for the specific vendor) Vendor Assigned Attribute number-1 (for Input/Uplink) 2 (for Output/Downlink) Attribute format decimal Attribute value-(Desired Input/Output bandwidth) How I can configure this attribte? Thanks and regards Anoop -----Original Message----- From: freeradius-users-bounces+anoop_c=sifycorp.com@lists.freeradius.org [mailto:freeradius-users-bounces+anoop_c=sifycorp.com@lists.freeradius.org] On Behalf Of freeradius-users-request@lists.freeradius.org Sent: Monday, April 27, 2009 10:57 PM To: freeradius-users@lists.freeradius.org Subject: Freeradius-Users Digest, Vol 48, Issue 114 Send Freeradius-Users mailing list submissions to freeradius-users@lists.freeradius.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeradius.org/mailman/listinfo/freeradius-users or, via email, send a message with subject or body 'help' to freeradius-users-request@lists.freeradius.org You can reach the person managing the list at freeradius-users-owner@lists.freeradius.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..." Today's Topics: 1. Re: %RADIUS-4-RADIUS_ALIVE | %RADIUS-4-RADIUS_DEAD help (A.L.M.Buxey@lboro.ac.uk) 2. Re: [Wimax TTLS with Alcatel - Lucent ASN GW] (Ivan Kalik) 3. RE: Adding vendor specefic attributes (Ivan Kalik) 4. Re: %RADIUS-4-RADIUS_ALIVE | %RADIUS-4-RADIUS_DEAD help (Borislav Dimitrov) 5. freeradius with active directory (David N'DAKPAZE) 6. Re: radpostauth sql logging of bad passwords (Guy Fraser) 7. Re: freeradius with active directory (bastardinho69) 8. Re: radpostauth sql logging of bad passwords (Alan DeKok) ---------------------------------------------------------------------- Message: 1 Date: Mon, 27 Apr 2009 13:41:38 +0100 From: A.L.M.Buxey@lboro.ac.uk Subject: Re: %RADIUS-4-RADIUS_ALIVE | %RADIUS-4-RADIUS_DEAD help To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Message-ID: <20090427124138.GC7926@lboro.ac.uk> Content-Type: text/plain; charset=us-ascii Hi,

Same box.

and you do live accounting database insertions? This sounds to me very much like the classic 'tables have now grown just too big' - everything works fine then barfs one day. the request isnt getting serviced in time therefore its marking as dead..check your query times...remove wrong/unused indexes or move to 'out of band' accounting inserts - very easy with 2.1.x alan ------------------------------ Message: 2 Date: Mon, 27 Apr 2009 14:36:54 +0100 (BST) From: "Ivan Kalik" <tnt@kalik.net> Subject: Re: [Wimax TTLS with Alcatel - Lucent ASN GW] To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Message-ID: <57087.194.176.105.43.1240839414.squirrel@webmail.kalik.net> Content-Type: text/plain;charset=utf-8

Anyway If I may reask a new question about adding multiple attribute to reply on the radius that proxy.

The solution you gave me, (eg use users file and match the Realm Attribute, DEFAULT Realm == whatever) is ok for a "ISP" radius (eg end radius), not for a "Wholesale" radius (eg radius that proxy). According to what I saw in debug, Realm attribute is only use in the request (eg add by the proxy radius), but even if I force it in the reply of the end radius, it won't be consider in the reply by the proxy radius.

So that I can not add the wanted attribute as I would like too.

For now what I do, is use the attrs file for first attribute, then use unlang in post auth to add the second attribute.

Files module supports use of files in post-auth and post-proxy. Add this to raddb/modules/files: postproxy_usersfile = ${confdir}/postproxy_users Then create postproxy_users in raddb directory (where other users files are) and list that DEAFAULT entry there. Ivan Kalik Kalik Informatika ISP ------------------------------ Message: 3 Date: Mon, 27 Apr 2009 14:43:25 +0100 (BST) From: "Ivan Kalik" <tnt@kalik.net> Subject: RE: Adding vendor specefic attributes To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Message-ID: <64565.194.176.105.44.1240839805.squirrel@webmail.kalik.net> Content-Type: text/plain;charset=utf-8

Is it possible to configure vendor specific attributes in Free RADIUS. Please guide where can I edit the configuration.

Nowhere.

I am using MAC authentication by editing the user file shown below.

'020a6-5a7fd9 Auth-Type:=Local,User-Password=="secret"

There is so much wrong with this unless you are using a very, very, very old server version.

MAC authentication is working and I would like to add a vendor specific attribute.

You add vendor specific attributes - just like any other. Just make sure that you have the dictionary for that vendor in your installation (it's a text file share/dictionary.vendor_name) and that that dictionary contains attribute you want to use. Ivan Kalik Kalik Informatika ISP ------------------------------ Message: 4 Date: Mon, 27 Apr 2009 17:44:10 +0300 From: Borislav Dimitrov <b.dimitrov@ngsystems.net> Subject: Re: %RADIUS-4-RADIUS_ALIVE | %RADIUS-4-RADIUS_DEAD help To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Message-ID: <618820F7-3340-4483-BEBB-7937BB8B5C62@ngsystems.net> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Hi, As far as I can see, the people on the list have provided you with a lot of very useful suggestions on what could cause the problem. As I said earlier (let me clarify) and to help you narrow things a little bit - it's probably due to the RADIUS response timing out hence the NAS complains the server is dead and later when it responds finally it marks it as alive again. The reasons can be different depending on your setup - slow network, database, custom module (like rlm_perl/ python etc) or as I suggested (from my personal experiences) improperly configured concurrence settings of FR itself. See which component of your setup is causing the slow responds (it can be the backend, or messed up FR configuration) and fix it. Just for completeness check your NASs manuals - most have these settings configurable - response timeouts, retransmits, marking the server as dead etc but playing with the NAS while possibly useful is probably not the main issue in your setup - check what is slowing things down. On 27.04.2009, at 15:41, A.L.M.Buxey@lboro.ac.uk wrote:

Hi,

...

Same box.

and you do live accounting database insertions? This sounds to me very much like the classic 'tables have now grown just too big' - everything works fine then barfs one day. the request isnt getting serviced in time therefore its marking as dead..check your query times...remove wrong/unused indexes or move to 'out of band' accounting inserts - very easy with 2.1.x

alan - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

------------------------------ Message: 5 Date: Mon, 27 Apr 2009 16:50:14 +0000 From: "David N'DAKPAZE" <lndakpaze@gmail.com> Subject: freeradius with active directory To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Message-ID: <16ad49990904270950v1fb0855bnff32138292a50585@mail.gmail.com> Content-Type: text/plain; charset="iso-8859-1" hello, I am configuring freeradius for authentication with active directory.I've used http://deployingradius.com/documents/configuration/active_directory but freeradius reject all the requests because of no known password.It what i have when i make a request: Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 51084, id=198, length=61 User-Name = "azerty" User-Password = "uiop" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop [suffix] No '@' in User-Name = "azerty", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop No authenticate method (Auth-Type) configuration found for the request: Rejecting the user Failed to authenticate the user. Login incorrect: [azerty/uiop] (from client localhost port 0) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> azerty attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 0 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 0 Sending Access-Reject of id 198 to 127.0.0.1 port 51084 Waking up in 4.9 seconds. Cleaning up request 0 ID 198 with timestamp +27 Thanks for your help