Hi all, Part 2 of my problems - has anyone got a radius server to hand out dynamic VLANs to an access point? I've got the following from various sites, but it doesn't seem to work (users file): 00-0e-35-31-5c-1b Auth-Type == Local,User-Password == "00-0e-35-31-5c-1b" Tunnel-Medium-Type = 802, Tunnel-Private-Group-ID = 20, Tunnel-Type = VLAN - this is meant to make the laptop with the given VLAN join to the network on vlan 20, but there is no sign of this working... any clues? cheers Jim Potter -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
Dynamic VLAN on an access point? Is this possible anyway? I've tried to use VLAN assignment on HP ProCurve 2626, but it just wont work. Due the lack of documentation, maybe someone should contact HP on this topic? Regards, Edvin -----Original Message----- From: freeradius-users-bounces+edvin.seferovic=kolp.at@lists.freeradius.org [mailto:freeradius-users-bounces+edvin.seferovic=kolp.at@lists.freeradius.or g] On Behalf Of Jim Potter Sent: Dienstag, 14. März 2006 16:10 To: FreeRadius users mailing list Subject: MAC/VLAN with HP Procurve Hi all, Part 2 of my problems - has anyone got a radius server to hand out dynamic VLANs to an access point? I've got the following from various sites, but it doesn't seem to work (users file): 00-0e-35-31-5c-1b Auth-Type == Local,User-Password == "00-0e-35-31-5c-1b" Tunnel-Medium-Type = 802, Tunnel-Private-Group-ID = 20, Tunnel-Type = VLAN - this is meant to make the laptop with the given VLAN join to the network on vlan 20, but there is no sign of this working... any clues? cheers Jim Potter -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Am Dienstag, 14. März 2006 16:48 schrieb Seferovic Edvin:
Dynamic VLAN on an access point? Is this possible anyway? I've tried to use VLAN assignment on HP ProCurve 2626, but it just wont work. Due the lack of documentation, maybe someone should contact HP on this topic?
It works. Pretty straight forward on a switch. Just stick to the documentation. Further info available on request. -- Dr. Michael Schwartzkopff MultiNET Services GmbH Bretonischer Ring 7 85630 Grasbrunn Tel: (+49 89) 456 911 - 0 Fax: (+49 89) 456 911 - 21 mob: (+49 174) 343 28 75 PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B Skype: misch42
On 3/14/06, Jim Potter <jim@because.org.uk> wrote:
00-0e-35-31-5c-1b Auth-Type == Local,User-Password == "00-0e-35-31-5c-1b" Tunnel-Medium-Type = 802, Tunnel-Private-Group-ID = 20, Tunnel-Type = VLAN
- this is meant to make the laptop with the given VLAN join to the network on vlan 20, but there is no sign of this working... any clues?
Could you try to change the Tunnel-Medium-Type value to "IEEE-802" On 3/14/06, Seferovic Edvin <edvin.seferovic@kolp.at> wrote:
Dynamic VLAN on an access point? Is this possible anyway?
Sure, the ProCurve 420 access points supports them (even per ESSID, 16 total). The ProCurve 520 does support dot1q, static (also per ESSID) but not dynamic.
I've tried to use VLAN assignment on HP ProCurve 2626, but it just wont work. Due the lack of documentation, maybe someone should contact HP on this topic?
Their documentation is pretty clear about it. http://www.hp.com/rnd/support/manuals/ I decided to read them and followed the step-by-step instructions, it's hard to believe but it works ;-).
participants (4)
-
Jim Potter -
Jorgen Rosink -
Michael Schwartzkopff -
Seferovic Edvin