New subject: how to config b2bua and freeradius together?

25 Oct 2005

      Dear Alan DeKok,

Thanks for your reply. Could you please tell me how to run radius client with b2bua? 

Here is my b2bua config file:

<B2BUA_Configuration>
  <SIP>
     <Local>
       <Port>5065</Port>
       <Transport>UDP</Transport>
     </Local>
     <Proxy_Server>
       <Address>218.97.252.34</Address>
       <Port>5060</Port>
     </Proxy_Server>
     <Registration>
       <Register>no</Register>
       <Address>218.97.252.41</Address>
       <Port>5060</Port>
       <Expires>600</Expires>
     </Registration>
  </SIP>
  <RADIUS>
     <Local>
       <Authentication_Port>1812</Authentication_Port>
       <Accounting_Port>1813</Accounting_Port>
     </Local>
    <Billing_Server>
       <Address>218.97.252.41</Address>
       <Authentication_Port>1812</Authentication_Port>
       <Accounting_Port>1813</Accounting_Port>
       <Password>testing123</Password>
    </Billing_Server>
  </RADIUS>
  <PrePaid>
    <Billing>
       <Option>mandatory</Option>
       <Refresh_Time>60</Refresh_Time>
       <Extract_User_Id_From>Proxy-Authorization</Extract_User_Id_From>
       <User_Id_Decode_Scheme>Basic</User_Id_Decode_Scheme>
    </Billing>
       <Use_SIP_INFO>no</Use_SIP_INFO>
       <Use_HTTP>no</Use_HTTP>
  </PrePaid>
  <Redundancy />
</B2BUA_Configuration>

218.97.252.34 is my ser proxy and 218.97.252.41 is radius server.

I run b2bua like this:

#cd \usr\local\vocal\bin
#./b2bua -d -v LOG_DEBUG_STACK -c b2bua-cfg.xml

Then b2bua could send the request to radius server.
...
"zhangshuai" <zhangshuai@goldentek.biz> wrote:
...
Now I found that b2bua can talk to radius server directly, without
using radius client.
Uh, no.  The only way to talk to a RADIUS server is via RADIUS.
...
rad_check_password:  Found Auth-Type System
auth: type "System"
  Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
  modcall[authenticate]: module "unix" returns notfound for request 0
So... the user isn't in /etc/passwd.
...
And this is part of my radcheck table on radius server:
+----+-----------------------------+---------------+----+-------+
| id | UserName                    | Attribute     | op | Value |
+----+-----------------------------+---------------+----+-------+
|  1 | 41001@localhost.localdomain | User-Password | := | 1001  |
|  2 | 41004@localhost.localdomain | User-Password | := | 1004  |
+----+-----------------------------+---------------+----+-------+
Could anyone tell me how to config b2bua and radius to make them work fine?
Don't set Auth-Type.
Alan DeKok.
- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
= = = = = = = = = = = = = = = = = = = =

Re: Re: how to config b2bua and freeradius together?

zhangshuai

Alan DeKok

tags

participants (2)