Hello, I´m trying to configure a FreeRadius 1.0.4 in Red Hat 8.0. Everything works OK until I add the ippool in the "post-auth" and "accounting" section. When I start the server I get always the error "Segmentation Fault" after loading radutmp, just when it tries to load the ippool in the "accounting" section I have the following configuration in the ippool module: ippool 2 { range-start = 172.20.1.1 range-stop = 172.20.1.254 netmask = 255.255.255.0 cache-size = 254 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = yes maximum-timeout = 0 } Do you know if I´m doing something wrong? Thanks
What does radiusd X tells you? Can you post more info from your accounting and post-auth section? _____ From: freeradius-users-bounces@lists.freeradius.org [mailto:freeradius-users-bounces@lists.freeradius.org] On Behalf Of abernabe@mutua-mad.es Sent: Friday, July 15, 2005 7:42 AM To: freeradius-users@lists.freeradius.org Subject: ippool problem Hello, I´m trying to configure a FreeRadius 1.0.4 in Red Hat 8.0. Everything works OK until I add the ippool in the "post-auth" and "accounting" section. When I start the server I get always the error "Segmentation Fault" after loading radutmp, just when it tries to load the ippool in the "accounting" section I have the following configuration in the ippool module: ippool 2 { range-start = 172.20.1.1 range-stop = 172.20.1.254 netmask = 255.255.255.0 cache-size = 254 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = yes maximum-timeout = 0 } Do you know if I´m doing something wrong? Thanks
radius -X doesn´t show any error or warning until the end (Segmentation fault). You can see the result of my last execution: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1645 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Segmentation fault And the config for the post-auth and accounting: # # Accounting. Log the accounting data. # accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. unix # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. radutmp # sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool ######### My two ippools 1 2 # # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf # sql # Cisco VoIP specific bulk accounting # pgsql-voip } # Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. post-auth { # Get an address from the IP Pool. # main_pool ###### My two ippools 1 2 # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log # # After authenticating the user, do another SQL qeury. # # See "Authentication Logging Queries" in sql.conf # sql # # Un-comment the following if you have set # 'edir_account_policy_check = yes' in the ldap module sub-section of # the 'modules' section. # # ldap # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # Uncomment the following and set the module name to the ldap instance # name if you have set 'edir_account_policy_check = yes' in the ldap # module sub-section of the 'modules' section. # # Post-Auth-Type REJECT { # insert-module-name-here # } } freeradius-users-bounces@lists.freeradius.org escribió el 15/07/2005 10:44:20:
What does radiusd ?X tells you? Can you post more info from your accounting and post-auth section?
From: freeradius-users-bounces@lists.freeradius.org [mailto: freeradius-users-bounces@lists.freeradius.org] On Behalf Of abernabe@mutua-mad.es Sent: Friday, July 15, 2005 7:42 AM To: freeradius-users@lists.freeradius.org Subject: ippool problem
Hello,
I´m trying to configure a FreeRadius 1.0.4 in Red Hat 8.0. Everything works OK until I add the ippool in the "post-auth" and "accounting" section.
When I start the server I get always the error "Segmentation Fault" after loading radutmp, just when it tries to load the ippool in the "accounting" section
I have the following configuration in the ippool module:
ippool 2 { range-start = 172.20.1.1 range-stop = 172.20.1.254 netmask = 255.255.255.0 cache-size = 254 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = yes maximum-timeout = 0 }
Do you know if I´m doing something wrong?
Thanks - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi. Is /usr/local/var/log/radius/radutmp existing and is rw for radius ? Cheers, Marcin. On Fri, 15 Jul 2005 12:04:55 +0200 abernabe@mutua-mad.es wrote:
radius -X doesn´t show any error or warning until the end (Segmentation fault). You can see the result of my last execution:
Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1645 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Segmentation fault
And the config for the post-auth and accounting:
# # Accounting. Log the accounting data. # accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily
# Update the wtmp file # # If you don't use "radlast", you can delete this line. unix
# # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. radutmp # sradutmp
# Return an address to the IP Pool when we see a stop record. # main_pool ######### My two ippools 1 2 # # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf # sql
# Cisco VoIP specific bulk accounting # pgsql-voip
}
# Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. post-auth { # Get an address from the IP Pool. # main_pool ###### My two ippools 1 2 # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log
# # After authenticating the user, do another SQL qeury. # # See "Authentication Logging Queries" in sql.conf # sql
# # Un-comment the following if you have set # 'edir_account_policy_check = yes' in the ldap module sub-section of # the 'modules' section. # # ldap # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # Uncomment the following and set the module name to the ldap instance # name if you have set 'edir_account_policy_check = yes' in the ldap # module sub-section of the 'modules' section. # # Post-Auth-Type REJECT { # insert-module-name-here # }
}
freeradius-users-bounces@lists.freeradius.org escribió el 15/07/2005 10:44:20:
What does radiusd ?X tells you? Can you post more info from your accounting and post-auth section?
From: freeradius-users-bounces@lists.freeradius.org [mailto: freeradius-users-bounces@lists.freeradius.org] On Behalf Of abernabe@mutua-mad.es Sent: Friday, July 15, 2005 7:42 AM To: freeradius-users@lists.freeradius.org Subject: ippool problem
Hello,
I´m trying to configure a FreeRadius 1.0.4 in Red Hat 8.0. Everything works OK until I add the ippool in the "post-auth" and "accounting" section.
When I start the server I get always the error "Segmentation Fault" after loading radutmp, just when it tries to load the ippool in the "accounting" section
I have the following configuration in the ippool module:
ippool 2 { range-start = 172.20.1.1 range-stop = 172.20.1.254 netmask = 255.255.255.0 cache-size = 254 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = yes maximum-timeout = 0 }
Do you know if I´m doing something wrong?
Thanks - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Check user access and access permissions from radiusd.conf and from the files and folders _____ From: abernabe@mutua-mad.es [mailto:abernabe@mutua-mad.es] Sent: Friday, July 15, 2005 11:05 AM To: mnisay@aim-consultants.com; FreeRadius users mailing list Subject: RE: ippool problem radius -X doesn´t show any error or warning until the end (Segmentation fault). You can see the result of my last execution: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/usr/local/var" main: logdir = "/usr/local/var/log/radius" main: libdir = "/usr/local/lib" main: radacctdir = "/usr/local/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 1645 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/local/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/usr/local/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: authtype = "MS-CHAP" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/usr/local/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/local/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Segmentation fault And the config for the post-auth and accounting: # # Accounting. Log the accounting data. # accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail # daily # Update the wtmp file # # If you don't use "radlast", you can delete this line. unix # # For Simultaneous-Use tracking. # # Due to packet losses in the network, the data here # may be incorrect. There is little we can do about it. radutmp # sradutmp # Return an address to the IP Pool when we see a stop record. # main_pool ######### My two ippools 1 2 # # Log traffic to an SQL database. # # See "Accounting queries" in sql.conf # sql # Cisco VoIP specific bulk accounting # pgsql-voip } # Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. post-auth { # Get an address from the IP Pool. # main_pool ###### My two ippools 1 2 # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above. # reply_log # # After authenticating the user, do another SQL qeury. # # See "Authentication Logging Queries" in sql.conf # sql # # Un-comment the following if you have set # 'edir_account_policy_check = yes' in the ldap module sub-section of # the 'modules' section. # # ldap # # Access-Reject packets are sent through the REJECT sub-section of the # post-auth section. # Uncomment the following and set the module name to the ldap instance # name if you have set 'edir_account_policy_check = yes' in the ldap # module sub-section of the 'modules' section. # # Post-Auth-Type REJECT { # insert-module-name-here # } } freeradius-users-bounces@lists.freeradius.org escribió el 15/07/2005 10:44:20:
What does radiusd –X tells you? Can you post more info from your accounting and post-auth section?
From: freeradius-users-bounces@lists.freeradius.org [mailto: freeradius-users-bounces@lists.freeradius.org] On Behalf Of abernabe@mutua-mad.es Sent: Friday, July 15, 2005 7:42 AM To: freeradius-users@lists.freeradius.org Subject: ippool problem
Hello,
I´m trying to configure a FreeRadius 1.0.4 in Red Hat 8.0. Everything works OK until I add the ippool in the "post-auth" and "accounting" section.
When I start the server I get always the error "Segmentation Fault" after loading radutmp, just when it tries to load the ippool in the "accounting" section
I have the following configuration in the ippool module:
ippool 2 { range-start = 172.20.1.1 range-stop = 172.20.1.254 netmask = 255.255.255.0 cache-size = 254 session-db = ${raddbdir}/db.ippool ip-index = ${raddbdir}/db.ipindex override = yes maximum-timeout = 0 }
Do you know if I´m doing something wrong?
Thanks - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (4)
-
abernabe＠mutua-mad.es -
Alan DeKok -
Marcin Jessa -
milver nisay