Re: Setting up FreeRADIUS 2.0.4 with OpenLDAP backend to do wireless auth
As the title says, I'm trying to set up FreeRadius to authenticate wireless clients (employees). I just finished deploying a Samba/Ldap domain, and I'd like to take advantage of this user db.
I already followed several howtos, more or less outdated.
Why not just install 2.1.8?
I upgraded to FR 2.1.8 from lenny-backports
I'm not familiar with the bunch of protocols coming with radius and 802.1x (PEAP, CHAP, etc.), and I can't find the issue.
Read the debug output, and look for "peap". It is telling you why it isn't working.
Sorry, I focused on the connection output more than on the starting one.
See also my web site for instructions on getting EAP to work:
I have already browsed your website and followed it Therefore, I have again trouble in setting up this configuration. The problem is EAP/PEAP related, and I am not able to resolve it. I authenticate successfully with the radtest tool (locally and remotely) but I can't get radeapclient to work, and obviously my wireless client. I think it comes from this: "TLS Alert read:fatal:unknown CA" but I don't think I need real certs to get it working. I searched the web for hours but I can't figure it out. Below is a new debug output of my server. By the way, I'm wondering why there are several "cycles" for one authentication (ie Finished request x. Going to the next request...). FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 3 2010 at 15:51:52 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/ldap.bak including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = no log { stripped_names = yes auth = yes auth_badpass = yes auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" shortname = "localhost" nastype = "other" } client 192.168.2.254 { require_message_authenticator = no secret = "testing123" shortname = "ap1" nastype = "other" } client 192.168.2.69 { require_message_authenticator = no secret = "testing123" shortname = "tux-island" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_ldap Module: Instantiating ldap ldap { server = "ldap-samba.edatis.net" port = 389 password = "XXXXXXXXXXXXXX" identity = "cn=samba,ou=DSA,o=siege,dc=edatis,dc=net" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "o=siege,dc=edatis,dc=net" filter = "(uid=%u)" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(|(&(objectClass=GroupOfNames)(member=%{Ldap- UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP userPassword mapped to RADIUS Cleartext-Password rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk- Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk- Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk- Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private- Group-Id conns: 0x8496e68 Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/etc/freeradius/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP- Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.2.254 port 1293, id=134, length=171 Message-Authenticator = 0xfca2dde9cbf88c9dda618843e4284ce3 Service-Type = Framed-User User-Name = "ja" Framed-MTU = 1488 Called-Station-Id = "0A1B2F3F4B09:TEST-RADIUS" Calling-Station-Id = "00215DE37F06" NAS-Identifier = "EdatisAP01" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x02000007016a61 NAS-IP-Address = 192.168.2.254 NAS-Port = 3 NAS-Port-Id = "STA port # 3" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ja", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 7 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop [ldap] performing user authorization for ja [ldap] expand: (uid=%u) -> (uid=ja) [ldap] expand: o=siege,dc=edatis,dc=net -> o=siege,dc=edatis,dc=net [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to ldap-samba.edatis.net:389, authentication 0 [ldap] bind as cn=samba,ou=DSA,o=siege,dc=edatis,dc=net/XXXXXXXXXXXXXX to ldap-samba.edatis.net:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in o=siege,dc=edatis,dc=net, with filter (uid=ja) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Cleartext-Password == "{SSHA}XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" [ldap] sambaNtPassword -> NT-Password == 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ldap] sambaLmPassword -> LM-Password == 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ldap] looking for reply items in directory... [ldap] user ja authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 134 to 192.168.2.254 port 1293 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa438c38da439daa8d179fc26af932d9e Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.2.254 port 1293, id=135, length=290 Message-Authenticator = 0x61de277698742a597fbfdfa29db339ba Service-Type = Framed-User User-Name = "ja" Framed-MTU = 1488 State = 0xa438c38da439daa8d179fc26af932d9e Called-Station-Id = "0A1B2F3F4B09:TEST-RADIUS" Calling-Station-Id = "00215DE37F06" NAS-Identifier = "EdatisAP01" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0201006c190016030100610100005d03014b61874aeb28191bfa0ea8959cc1ab00195297e60342f30e507416004b4f9da900003600390038003500160013000a00330032002f0007006600050004006300620061001500120009006500640060001400110008000600030100 NAS-IP-Address = 192.168.2.254 NAS-Port = 3 NAS-Port-Id = "STA port # 3" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ja", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 108 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0061], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 01bd], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 135 to 192.168.2.254 port 1293 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xb26ca06fb9564f6838c48cd69411fff000809fe7701c1477e5179290708ce743868ea56cdb352974ec0ea4589962488ca99abf83c41f4f0b260ef237260b4a04969c912d75af43ddf8d954a8ed01aec64a435083efc37491dbe27cbc9feb56b9fa8642e38c722e5390209eb042d9d7a5dcddd6d495496e17865d957051388c904a0071135e94583ec47b353bbf982a8197a216030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa438c38da53adaa8d179fc26af932d9e Finished request 1. Going to the next request Waking up in 3.6 seconds. rad_recv: Access-Request packet from host 192.168.2.254 port 1293, id=136, length=195 Message-Authenticator = 0xc61290830e73ebcbfef0062e173c6144 Service-Type = Framed-User User-Name = "ja" Framed-MTU = 1488 State = 0xa438c38da53adaa8d179fc26af932d9e Called-Station-Id = "0A1B2F3F4B09:TEST-RADIUS" Calling-Station-Id = "00215DE37F06" NAS-Identifier = "EdatisAP01" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202000d190015030100020230 NAS-IP-Address = 192.168.2.254 NAS-Port = 3 NAS-Port-Id = "STA port # 3" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ja", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 13 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert read:fatal:unknown CA TLS_accept:failed in SSLv3 read client certificate A rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca SSL: SSL_read failed inside of TLS (-1), TLS session fails. TLS receive handshake failed during operation [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [ja/<via Auth-Type = EAP>] (from client ap1 port 3 cli 00215DE37F06) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ja attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 2 for 1 seconds Going to the next request Waking up in 0.9 seconds. rad_recv: Access-Request packet from host 192.168.2.254 port 1294, id=137, length=171 Message-Authenticator = 0x123f0be24507e527bfd48cd7a04a1b21 Service-Type = Framed-User User-Name = "ja" Framed-MTU = 1488 Called-Station-Id = "0A1B2F3F4B09:TEST-RADIUS" Calling-Station-Id = "00215DE37F06" NAS-Identifier = "EdatisAP01" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x02000007016a61 NAS-IP-Address = 192.168.2.254 NAS-Port = 3 NAS-Port-Id = "STA port # 3" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ja", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 0 length 7 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound ++[files] returns noop [ldap] performing user authorization for ja [ldap] expand: (uid=%u) -> (uid=ja) [ldap] expand: o=siege,dc=edatis,dc=net -> o=siege,dc=edatis,dc=net [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in o=siege,dc=edatis,dc=net, with filter (uid=ja) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Cleartext-Password == "{SSHA}XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX" [ldap] sambaNtPassword -> NT-Password == 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ldap] sambaLmPassword -> LM-Password == 0xXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX [ldap] looking for reply items in directory... [ldap] user ja authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Normalizing NT-Password from hex encoding [pap] Normalizing LM-Password from hex encoding [pap] Found existing Auth-Type, not changing it. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 137 to 192.168.2.254 port 1294 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x44e9d36244e8cae81cf82d892cb5dbf8 Finished request 3. Going to the next request Waking up in 0.7 seconds. rad_recv: Access-Request packet from host 192.168.2.254 port 1294, id=138, length=290 Message-Authenticator = 0x2dc7cf319bfb82806770c39934f0391c Service-Type = Framed-User User-Name = "ja" Framed-MTU = 1488 State = 0x44e9d36244e8cae81cf82d892cb5dbf8 Called-Station-Id = "0A1B2F3F4B09:TEST-RADIUS" Calling-Station-Id = "00215DE37F06" NAS-Identifier = "EdatisAP01" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0201006c190016030100610100005d03014b61874c6667be29a0fbce66ff0da6002ab9c1fac607f69b47b27d17adaa2d3e00003600390038003500160013000a00330032002f0007006600050004006300620061001500120009006500640060001400110008000600030100 NAS-IP-Address = 192.168.2.254 NAS-Port = 3 NAS-Port-Id = "STA port # 3" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ja", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 1 length 108 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0061], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 01bd], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 018d], ServerKeyExchange [peap] TLS_accept: SSLv3 write key exchange A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 138 to 192.168.2.254 port 1294 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x361f3d29ef8ddf80a99cd4a356bab9ad00803521405ab0f429bd23b1c8329995ab467c57e17eb0e831b45dbdefbfae56582885504ad7095aeea550fa5b1ec3bb19c98f372d021103bb526d6be8821a4a13f7d945e6f82726f0abcb58935cc4d0de62d3aa87e8653a29183f50bb0f16f47d618fb7b56fea3e4822a9162ceae752bf2b821b95fa95080acf1d1446515e2ac1ea16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x44e9d36245ebcae81cf82d892cb5dbf8 Finished request 4. Going to the next request Waking up in 0.6 seconds. rad_recv: Access-Request packet from host 192.168.2.254 port 1294, id=139, length=195 Message-Authenticator = 0x56d112f581e36338b0f532c75efff986 Service-Type = Framed-User User-Name = "ja" Framed-MTU = 1488 State = 0x44e9d36245ebcae81cf82d892cb5dbf8 Called-Station-Id = "0A1B2F3F4B09:TEST-RADIUS" Calling-Station-Id = "00215DE37F06" NAS-Identifier = "EdatisAP01" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0202000d190015030100020230 NAS-IP-Address = 192.168.2.254 NAS-Port = 3 NAS-Port-Id = "STA port # 3" +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "ja", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 2 length 13 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] <<< TLS 1.0 Alert [length 0002], fatal unknown_ca TLS Alert read:fatal:unknown CA TLS_accept:failed in SSLv3 read client certificate A rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca SSL: SSL_read failed inside of TLS (-1), TLS session fails. TLS receive handshake failed during operation [peap] eaptls_process returned 4 [peap] EAPTLS_OTHERS [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Login incorrect: [ja/<via Auth-Type = EAP>] (from client ap1 port 3 cli 00215DE37F06) Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> ja attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 5 for 1 seconds Going to the next request Waking up in 0.5 seconds. Sending delayed reject for request 2 Sending Access-Reject of id 136 to 192.168.2.254 port 1293 EAP-Message = 0x04020004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 0.4 seconds. rad_recv: Access-Request packet from host 192.168.2.254 port 1294, id=139, length=195 Waiting to send Access-Reject to client ap1 port 1294 - ID: 139 Sending delayed reject for request 5 Sending Access-Reject of id 139 to 192.168.2.254 port 1294 EAP-Message = 0x04020004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 2.0 seconds. Cleaning up request 0 ID 134 with timestamp +23 Waking up in 1.3 seconds. Cleaning up request 1 ID 135 with timestamp +24 Waking up in 0.3 seconds. Cleaning up request 3 ID 137 with timestamp +25 Waking up in 0.1 seconds. Cleaning up request 4 ID 138 with timestamp +25 Waking up in 0.6 seconds. Cleaning up request 2 ID 136 with timestamp +24 Waking up in 0.4 seconds. Cleaning up request 5 ID 139 with timestamp +25 Ready to process requests. Thanks. Jonathan Amiez. -- *************************** Jonathan Amiez Administrateur système ja@edatis.com ***************************
Jonathan Amiez wrote:
Therefore, I have again trouble in setting up this configuration.
The problem is EAP/PEAP related, and I am not able to resolve it.
Post the debug log into: http://networkradius.com/freeradius.html And look for the red text.
I authenticate successfully with the radtest tool (locally and remotely) but I can't get radeapclient to work, and obviously my wireless client.
I think it comes from this: "TLS Alert read:fatal:unknown CA" but I don't think I need real certs to get it working.
No. It means that the certificate being sent by the client isn't known to the server. The HOWTO on deployingradius.com creates a configuration which does *not* have this problem.
By the way, I'm wondering why there are several "cycles" for one authentication (ie Finished request x. Going to the next request...).
Because more packets are being received. Alan DeKok.
Alan DeKok wrote:
Jonathan Amiez wrote:
Therefore, I have again trouble in setting up this configuration.
The problem is EAP/PEAP related, and I am not able to resolve it.
Post the debug log into:
http://networkradius.com/freeradius.html
And look for the red text.
Hmm should stop matching in AVP output, it's mostly user generated content so it'll give false positives. I guess users should be clever enough to spot 'User-Name = 'error_mc_erinson@errorland.com'' ;) -Arran
Le jeudi 28 janvier 2010 18:18:01, Alan DeKok a écrit :
Jonathan Amiez wrote:
Therefore, I have again trouble in setting up this configuration.
The problem is EAP/PEAP related, and I am not able to resolve it.
Post the debug log into:
http://networkradius.com/freeradius.html
And look for the red text.
Thanks for this tool. It gives me this red line in several packets. rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca In debian, certs are linked from the snakeoil openSSL certs. So I removed the links, got the FR sources and copy the raddb/certs contents into /etc/freeradius/certs. Then I ran make to generate new certs, but the problem's still there. Regards -- *************************** Jonathan Amiez Administrateur système ja@edatis.com ***************************
-----Original Message----- From: freeradius-users- bounces+jmdanner=samford.edu@lists.freeradius.org [mailto:freeradius- users-bounces+jmdanner=samford.edu@lists.freeradius.org] On Behalf Of Jonathan Amiez Sent: Thursday, January 28, 2010 11:46 AM To: FreeRadius users mailing list Subject: Re: Setting up FreeRADIUS 2.0.4 with OpenLDAP backend to do wireless auth
Le jeudi 28 janvier 2010 18:18:01, Alan DeKok a écrit :
Jonathan Amiez wrote:
Therefore, I have again trouble in setting up this configuration.
The problem is EAP/PEAP related, and I am not able to resolve it.
Post the debug log into:
http://networkradius.com/freeradius.html
And look for the red text.
Thanks for this tool. It gives me this red line in several packets.
rlm_eap: SSL error error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca
In debian, certs are linked from the snakeoil openSSL certs. So I removed the links, got the FR sources and copy the raddb/certs contents into /etc/freeradius/certs. Then I ran make to generate new certs, but the problem's still there.
Did you install the new cert on the client?
Regards -- *************************** Jonathan Amiez Administrateur système ja@edatis.com ***************************
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Jonathan Amiez wrote:
In debian, certs are linked from the snakeoil openSSL certs. So I removed the links, got the FR sources and copy the raddb/certs contents into /etc/freeradius/certs. Then I ran make to generate new certs, but the problem's still there.
You helpfully deleted the one comment that applies here:
No. It means that the certificate being sent by the client isn't known to the server.
So... did you put the new CA on the client? Alan DeKok.
On Thu, Jan 28, 2010 at 06:46:12PM +0100, Jonathan Amiez wrote:
In debian, certs are linked from the snakeoil openSSL certs. So I removed the links, got the FR sources and copy the raddb/certs contents into /etc/freeradius/certs. Then I ran make to generate new certs, but the problem's still there.
For future reference, raddb/certs files are actually there in the package at /usr/share/doc/freeradius/examples/certs/ -- 2. That which causes joy or happiness.
participants (5)
-
Alan DeKok -
Arran Cudbard-Bell -
Danner, Mearl -
Jonathan Amiez -
Josip Rodin