Help(1.1.3): How to enable EAP-TTLS?
Hi, I was able to enable EAP-TTLS in eap.conf file. After sending an Access-Request with EAP-Identity response, using "radeapaclient", an Access-Challenge (with EAP-Type = 21) was received from the server. Immediately after receivng the challenge the client is terminating. What configuration should be done so that client (radeapclient) responds to the challenge properly? -- With Regards, Govardhana K N
http://www.freeradius.org/radiusd/man/radeapclient.txt "The EAP-MD5-Password attribute, if present is used to respond to an MD5 challenge. No other EAP types are currently supported." Ivan Kalik Kalik Informatika ISP Dana 20/7/2007, "Govardhana K N" <govardhan.nagarajaiah@gmail.com> piše:
Hi,
I was able to enable EAP-TTLS in eap.conf file. After sending an Access-Request with EAP-Identity response, using "radeapaclient", an Access-Challenge (with EAP-Type = 21) was received from the server. Immediately after receivng the challenge the client is terminating.
What configuration should be done so that client (radeapclient) responds to the challenge properly?
-- With Regards, Govardhana K N
Ivan, Does that mean, EAP-TTLS is supported in FreeRadius Server but not in FreeRadius Client? Does it work if I use some other client which has EAP-TTLS support? Thanks & Regards, Govardhana K N On 7/20/07, tnt@kalik.co.yu <tnt@kalik.co.yu> wrote:
http://www.freeradius.org/radiusd/man/radeapclient.txt
"The EAP-MD5-Password attribute, if present is used to respond to an MD5 challenge.
No other EAP types are currently supported."
Ivan Kalik Kalik Informatika ISP
Dana 20/7/2007, "Govardhana K N" <govardhan.nagarajaiah@gmail.com> piše:
Hi,
I was able to enable EAP-TTLS in eap.conf file. After sending an Access-Request with EAP-Identity response, using "radeapaclient", an Access-Challenge (with EAP-Type = 21) was received from the server. Immediately after receivng the challenge the client is terminating.
What configuration should be done so that client (radeapclient) responds to the challenge properly?
-- With Regards, Govardhana K N
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- With Regards, Govardhana K N
You can try wpa_supplicant's eapol_test. It should support all EAP types that wpa_supplicant supports. Ivan Kalik Kalik Informatika ISP Dana 20/7/2007, "Govardhana K N" <govardhan.nagarajaiah@gmail.com> piše:
Ivan,
Does that mean, EAP-TTLS is supported in FreeRadius Server but not in FreeRadius Client?
Does it work if I use some other client which has EAP-TTLS support?
Thanks & Regards, Govardhana K N
On 7/20/07, tnt@kalik.co.yu <tnt@kalik.co.yu> wrote:
http://www.freeradius.org/radiusd/man/radeapclient.txt
"The EAP-MD5-Password attribute, if present is used to respond to an MD5 challenge.
No other EAP types are currently supported."
Ivan Kalik Kalik Informatika ISP
Dana 20/7/2007, "Govardhana K N" <govardhan.nagarajaiah@gmail.com> pie:
Hi,
I was able to enable EAP-TTLS in eap.conf file. After sending an Access-Request with EAP-Identity response, using "radeapaclient", an Access-Challenge (with EAP-Type = 21) was received from the server. Immediately after receivng the challenge the client is terminating.
What configuration should be done so that client (radeapclient) responds to the challenge properly?
-- With Regards, Govardhana K N
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- With Regards, Govardhana K N
participants (3)
-
A.L.M.Buxey＠lboro.ac.uk -
Govardhana K N -
tnt＠kalik.co.yu