ippool or sqlippool support for EAP/TLS or TTLS on Wimax
Hi, I read from a post back in 2007 that freeRADIUS ippool or sqlippool does not support assigning IP via EAP/TLS. I was wondering if this is still the case? Alan mentioned that there would be options that might be part of 2.0 release. Is there any solution for this with the current release? Thanks, Victor
Victor Tangendjaja wrote:
I read from a post back in 2007 that freeRADIUS ippool or sqlippool does not support assigning IP via EAP/TLS. I was wondering if this is still the case?
Yes. Because when 802.1X is used, IP address assignment is done via DHCP.
Alan mentioned that there would be options that might be part of 2.0 release. Is there any solution for this with the current release?
No. Alan DeKok.
WiMAX can also works in DHCP proxy mode: acquire IP address from ip pool in RADIUS and convert to DHCP message format for the R6 interface. IP address assignment has nothing to do with the EAP method (EAP-TLS) you are using. I make the ip pool assignment working using sqlippool. What is your particular concern regarding ip pool assignment using sqlipppol? Thanks, Jay On Fri, Sep 4, 2009 at 1:51 AM, Alan DeKok <aland@deployingradius.com>wrote:
Victor Tangendjaja wrote:
I read from a post back in 2007 that freeRADIUS ippool or sqlippool does not support assigning IP via EAP/TLS. I was wondering if this is still the case?
Yes. Because when 802.1X is used, IP address assignment is done via DHCP.
Alan mentioned that there would be options that might be part of 2.0 release. Is there any solution for this with the current release?
No.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (3)
-
Alan DeKok -
Jay Xiong -
Victor Tangendjaja