here is [most] of the -X -A output rlm_eap: EAP packet type response id 4 length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 modcall: group authorize returns updated for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 4 modcall: group authenticate returns handled for request 4 Sending Access-Challenge of id 0 to 127.0.0.1:1025 EAP-Message = 0x0105003119001403010001011603010020f640f17cc4d9b95c689f37535f0c167e7ef85920fa1a584ae45ca46e4e27be88 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x89c31ab5692851c1b54665f205acfdb1 Finished request 4 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:1025, id=0, length=138 User-Name = "jboast" NAS-IP-Address = 127.0.0.1 Called-Station-Id = "0014bf1c0216" Calling-Station-Id = "0090967ee1f9" NAS-Identifier = "0014bf1c0216" NAS-Port = 38 Framed-MTU = 1400 State = 0x89c31ab5692851c1b54665f205acfdb1 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020500061900 Message-Authenticator = 0x86ad4528b700aed9bb049bed435eeb10 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 rlm_eap: EAP packet type response id 5 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall: group authorize returns updated for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 5 modcall: group authenticate returns handled for request 5 Sending Access-Challenge of id 0 to 127.0.0.1:1025 EAP-Message = 0x0106002019001703010015c0b9557e082a58271186f1038ce6579a67a52b2c30 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4641f1c68dfd842fbecaa2555be47878 Finished request 5 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:1025, id=0, length=166 User-Name = "jboast" NAS-IP-Address = 127.0.0.1 Called-Station-Id = "0014bf1c0216" Calling-Station-Id = "0090967ee1f9" NAS-Identifier = "0014bf1c0216" NAS-Port = 38 Framed-MTU = 1400 State = 0x4641f1c68dfd842fbecaa2555be47878 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x0206002219001703010017c6caefa5edac16bea7db9a9ee8f16dec3d5db28d1111ef Message-Authenticator = 0xceffd3aede7f9a429813aa64fde5fc65 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 rlm_eap: EAP packet type response id 6 length 34 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall: group authorize returns updated for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - jboast rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled identity of jboast PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to jboast Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 rlm_eap: EAP packet type response id 6 length 11 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall: group authorize returns updated for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 6 modcall: group authenticate returns handled for request 6 PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 6 modcall: group authenticate returns handled for request 6 Sending Access-Challenge of id 0 to 127.0.0.1:1025 EAP-Message = 0x010700371900170301002c822385e6e9fb2b3f8f6155f76311e50bfbdb2a4d27557ae1de8893be311197d14003ff17cb0259d2b452ce2f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb931efb43a135bd61a8d7beedcd95701 Finished request 6 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:1025, id=0, length=220 User-Name = "jboast" NAS-IP-Address = 127.0.0.1 Called-Station-Id = "0014bf1c0216" Calling-Station-Id = "0090967ee1f9" NAS-Identifier = "0014bf1c0216" NAS-Port = 38 Framed-MTU = 1400 State = 0xb931efb43a135bd61a8d7beedcd95701 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020700581900170301004dcd9e19e4f8d3efb85c7af02264394c0effdc9df18751700ce7a51ddb927afa8d37e5e0a96c4dc4e54c62183f32aa2a9af1da58a06434e307bde2540bf10bc20fafbeefd8fbdc591c3a111133f1 Message-Authenticator = 0x72c9d318441ce6bedfb78bff20d6ef6a Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 rlm_eap: EAP packet type response id 7 length 88 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 modcall: group authorize returns updated for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Setting User-Name to jboast PEAP: Adding old state with 07 73 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 rlm_eap: EAP packet type response id 7 length 65 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 modcall: group authorize returns updated for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 ERROR: Unknown value specified for Auth-Type. Cannot perform requested action. rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 7 modcall: group authenticate returns reject for request 7 auth: Failed to validate the user. PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE modcall[authenticate]: module "eap" returns handled for request 7 modcall: group authenticate returns handled for request 7 Sending Access-Challenge of id 0 to 127.0.0.1:1025 EAP-Message = 0x010800261900170301001bef481fb0682ffedaef80653a2b14e3ce38c357d2ac27693b8b5b7e Message-Authenticator = 0x00000000000000000000000000000000 State = 0xc1d1f811200e081feb3c7e131c64e96b Finished request 7 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:1025, id=0, length=170 User-Name = "jboast" NAS-IP-Address = 127.0.0.1 Called-Station-Id = "0014bf1c0216" Calling-Station-Id = "0090967ee1f9" NAS-Identifier = "0014bf1c0216" NAS-Port = 38 Framed-MTU = 1400 State = 0xc1d1f811200e081feb3c7e131c64e96b NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020800261900170301001b2e1b4f233395cb709a8d40be375a07c87f3d040c139b8989f41d4e Message-Authenticator = 0x8e4f17e45575d244747d1f0d76b2f772 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 8 rlm_eap: EAP packet type response id 8 length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 8 modcall: group authorize returns updated for request 8 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 8 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Had sent TLV failure, rejecting. rlm_eap: Handler failed in EAP/peap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 8 modcall: group authenticate returns invalid for request 8 auth: Failed to validate the user. Delaying request 8 for 1 seconds Finished request 8 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Sending Access-Reject of id 0 to 127.0.0.1:1025 EAP-Message = 0x04080004 Message-Authenticator = 0x00000000000000000000000000000000 Cleaning up request 8 ID 0 with timestamp 4404fa1e Nothing to do. Sleeping until we see a request. im sure it's something simple, i've been working at it all day, i need a break, hopefully someone can help. Thanks Jon