Mathias Dörr wrote:

Hello, I have version 1.0.4 installed and trying know to make authorization/ authentication by the remote ip address, instead of username and password. In the main distribution authorization/ authentication is based on username /password. Where is the starting point to get this implemented ?

Many thanks Mathias

- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

NAS-IP-Address or the user's actual Framed-IP-Address? In either case, you could do it with huntgroups. Although if you are trying to do it with Framed-IP-Address you might run into some problems getting this on the auth request packet. etc/huntgroups: deniedIP NAS-IP-Address == 10.32.0.44 deniedIP NAS-IP-Address == 10.32.0.52 acceptedIP NAS-IP-Address == 192.168.0.33 acceptedIP NAS-IP-Address == 192.168.0.2 etc/users: DEFAULT Huntgroup-Name == deniedIP, Auth-Type := Reject DEFAULT Huntgroup-Name == acceptedIP, Auth-Type := Accept The attribs you are creating the huntgroups with in etc/huntgroups must be on the auth request packet as far as I know. This is a rather odd request, so I'm wondering if I guessed your objective correctly. -Chris Carver