First of all i want to say i'm sorry for attaching so many messages, my problem is that i don't have a clueof where is the problem. When i run radlogin and write the username and the password i get this: login: testuser Password: RADIUS: Authentication failure local: Authentication failure login: testuser Password: RADIUS: Authentication OK Starting. RADIUS_SERVICE_TYPE = NAS-Prompt-User RADIUS_USER_NAME = testuser As you can see, in the first try it doesn't work but in the second try it does!!! I don't undersatnd why this is happening. I attach the messages of the server in verbose mode. I would appreciate a lot if somebody could help me, thanks a lot, Sofía ad_recv: Access-Request packet from host 10.220.5.32:1025, id=168, length=66 --- Walking the entire request list --- Waking up in 31 seconds... Thread 3 got semaphore Thread 3 handling request 2, (1 handled so far) Service-Type = Login-User User-Name = "testuser" User-Password = "testuser" NAS-IP-Address = 10.220.5.32 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 radius_xlat: '/var/log/radius/radacct/10.220.5.32/auth-detail-20070904' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.220.5.32/auth-detail-20070904 modcall[authorize]: module "auth_log" returns ok for request 2 modcall[authorize]: module "attr_filter" returns noop for request 2 rlm_realm: No '/' in User-Name = "testuser", looking up realm NULL rlm_realm: Found realm "NULL" rlm_realm: Adding Stripped-User-Name = "testuser" rlm_realm: Proxying request from user testuser to realm NULL rlm_realm: Adding Realm = "NULL" rlm_realm: Preparing to proxy authentication request to realm "NULL" modcall[authorize]: module "IPASS" returns updated for request 2 rlm_realm: Request already proxied. Ignoring. modcall[authorize]: module "suffix" returns noop for request 2 rlm_realm: Request already proxied. Ignoring. modcall[authorize]: module "ntdomain" returns noop for request 2 rlm_realm: Request already proxied. Ignoring. modcall[authorize]: module "NULL" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 users: Matched entry DEFAULT at line 16 modcall[authorize]: module "files" returns ok for request 2 modcall[authorize]: module "etc_passwd" returns ok for request 2 modcall[authorize]: module "etc_shadow" returns ok for request 2 rlm_passwd: Added Group-Name: 'users' to reply_items rlm_passwd: Added Group-Name: 'video' to reply_items rlm_passwd: Added Group-Name: 'dialout' to reply_items modcall[authorize]: module "etc_group" returns ok for request 2 rlm_checkval: Could not find item named Calling-Station-Id in request rlm_checkval: Could not find attribute named Calling-Station-Id in check pairs modcall[authorize]: module "checkval" returns notfound for request 2 modcall: leaving group authorize (returns updated) for request 2 Processing the pre-proxy section of radiusd.conf modcall: entering group pre-proxy for request 2 radius_xlat: '/var/log/radius/radacct/10.220.5.32/pre-proxy-detail-20070904' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d expands to /var/log/radius/radacct/10.220.5.32/pre-proxy-detail-20070904 modcall[pre-proxy]: module "pre_proxy_log" returns ok for request 2 modcall: leaving group pre-proxy (returns ok) for request 2 Sending Access-Request of id 1 to 10.220.5.33 port 1645 Service-Type = Login-User User-Name = "testuser" User-Password = "testuser" NAS-IP-Address = 10.220.5.32 NAS-Port = 0 Proxy-State = 0x313638 Thread 3 waiting to be assigned a request rad_recv: Access-Request packet from host 10.220.5.33:1647, id=1, length=71 Ignoring request from unknown client 10.220.5.33:1647 Waking up in 31 seconds... rad_recv: Access-Request packet from host 10.220.5.32:1025, id=168, length=66 Ignoring duplicate packet from client linuxclient:1025 - ID: 168, due to outstanding proxied request 2. --- Walking the entire request list --- Re-sending Access-Request of id 1 to 10.220.5.33 port 1645 Service-Type = Login-User User-Name = "testuser" User-Password = "testuser" NAS-IP-Address = 10.220.5.32 NAS-Port = 0 Client-IP-Address = 10.220.5.32 Stripped-User-Name = "testuser" Realm = "NULL" Realm = "NULL" Proxy-State = 0x313638 Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.220.5.33:1647, id=1, length=71 Ignoring request from unknown client 10.220.5.33:1647 Waking up in 5 seconds... --- Walking the entire request list --- Re-sending Access-Request of id 1 to 10.220.5.33 port 1645 Service-Type = Login-User User-Name = "testuser" User-Password = "testuser" NAS-IP-Address = 10.220.5.32 NAS-Port = 0 Client-IP-Address = 10.220.5.32 Stripped-User-Name = "testuser" Realm = "NULL" Realm = "NULL" Proxy-State = 0x313638 Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.220.5.33:1647, id=1, length=71 Ignoring request from unknown client 10.220.5.33:1647 Waking up in 5 seconds... --- Walking the entire request list --- Server rejecting request 2. marking authentication server 10.220.5.33:1645 for realm NULL dead marking authentication server 10.220.5.33:1645 for realm DEFAULT dead Waking up in 0 seconds... --- Walking the entire request list --- Sending Access-Reject of id 168 to 10.220.5.32 port 1025 Cleaning up request 2 ID 168 with timestamp 46ddb600 Nothing to do. Sleeping until we see a request. rad_recv: Access-Request packet from host 10.220.5.32:1025, id=169, length=66 --- Walking the entire request list --- Waking up in 31 seconds... Thread 4 got semaphore Thread 4 handling request 3, (1 handled so far) Service-Type = Login-User User-Name = "testuser" User-Password = "testuser" NAS-IP-Address = 10.220.5.32 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 radius_xlat: '/var/log/radius/radacct/10.220.5.32/auth-detail-20070904' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d expands to /var/log/radius/radacct/10.220.5.32/auth-detail-20070904 modcall[authorize]: module "auth_log" returns ok for request 3 modcall[authorize]: module "attr_filter" returns noop for request 3 rlm_realm: No '/' in User-Name = "testuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "IPASS" returns noop for request 3 rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_realm: No '\' in User-Name = "testuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 3 rlm_realm: No '@' in User-Name = "testuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "NULL" returns noop for request 3 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 3 users: Matched entry DEFAULT at line 16 modcall[authorize]: module "files" returns ok for request 3 modcall[authorize]: module "etc_passwd" returns ok for request 3 modcall[authorize]: module "etc_shadow" returns ok for request 3 rlm_passwd: Added Group-Name: 'users' to reply_items rlm_passwd: Added Group-Name: 'video' to reply_items rlm_passwd: Added Group-Name: 'dialout' to reply_items modcall[authorize]: module "etc_group" returns ok for request 3 rlm_checkval: Could not find item named Calling-Station-Id in request rlm_checkval: Could not find attribute named Calling-Station-Id in check pairs modcall[authorize]: module "checkval" returns notfound for request 3 modcall: leaving group authorize (returns ok) for request 3 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 modcall[authenticate]: module "unix" returns ok for request 3 modcall: leaving group authenticate (returns ok) for request 3 Login OK: [testuser/testuser] (from client linuxclient port 0) Processing the post-auth section of radiusd.conf modcall: entering group post-auth for request 3 radius_xlat: '/var/log/radius/radacct/10.220.5.32/reply-detail-20070904' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d expands to /var/log/radius/radacct/10.220.5.32/reply-detail-20070904 modcall[post-auth]: module "reply_log" returns ok for request 3 modcall: leaving group post-auth (returns ok) for request 3 Sending Access-Accept of id 169 to 10.220.5.32 port 1025 Service-Type = NAS-Prompt-User Finished request 3 Going to the next request Thread 4 waiting to be assigned a request _________________________________________________________________ Visita MSN Latino Entretenimiento: ¡música, cine, chismes, TV y más...! http://latino.msn.com/entretenimiento/