alan!! and install the new version and the probe, probe with radtest and I get this: Sending Access-Request of id 236 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "testing123" NAS-IP-Address = 10.30.1.104 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=236, length=20 its ok but... radiusd -X run and I get this:: FreeRADIUS Version 2.0.5, for host x86_64-unknown-linux-gnu, built on Sep 3 2008 at 17:32:08 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including configuration file /usr/local/etc/raddb/snmp.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/eap.conf including configuration file /usr/local/etc/raddb/sql.conf including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/sql/mysql/counter.conf including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default including dictionary file /usr/local/etc/raddb/dictionary main { prefix = "/usr/local" localstatedir = "/usr/local/var" logdir = "/usr/local/var/log/radius" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } } client 10.0.6.29 { require_message_authenticator = no secret = "testing123" shortname = "ap" } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_check = "none" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" } Generating a 2048 bit RSA private key ........................................................................................................................................................................................................................................................................................................+++ .....+++ unable to write 'random state' writing new private key to 'ca.key' ----- Generating a 2048 bit RSA private key .......+++ ..................................+++ unable to write 'random state' writing new private key to 'server.key' ----- Using configuration from ./server.cnf Check that the request matches the signature Signature ok Certificate Details: Serial Number: 1 (0x1) Validity Not Before: Sep 3 20:51:16 2008 GMT Not After : Sep 3 20:51:16 2009 GMT Subject: countryName = FR stateOrProvinceName = Radius organizationName = Example Inc. commonName = Example Server Certificate emailAddress = admin@example.com X509v3 extensions: X509v3 Extended Key Usage: TLS Web Server Authentication Certificate is to be certified until Sep 3 20:51:16 2009 GMT (365 days) Write out database with 1 new entries Data Base Updated unable to write 'random state' unable to write 'random state' MAC verified OK Generating DH parameters, 1024 bit long safe prime, generator 2 This is going to take a long time *****************************+*************************+****************************** ... unable to write 'random state' Exec-Program output: openssl req -new -x509 -keyout ca.key -out ca.pem -config ./ca.cnf openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der openssl req -new -out server.csr -keyout server.key -config ./server.cnf openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -key `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl pkcs12 -in server.p12 -out server.pem -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl dhparam -out dh 1024 Exec-Program-Wait: plaintext: openssl req -new -x509 -keyout ca.key -out ca.pem -config ./ca.cnf openssl x509 -inform PEM -outform DER -in ca.pem -out ca.der openssl req -new -out server.csr -keyout server.key -config ./server.cnf openssl ca -batch -keyfile ca.key -cert ca.pem -in server.csr -key `grep output_password ca.cnf | sed 's/.*=//;s/^ *//'` -out server.crt -extensions xpserver_ext -extfile xpextensions -config ./server.cnf openssl pkcs12 -export -in server.crt -inkey server.key -out server.p12 -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl pkcs12 -in server.p12 -out server.pem -passin pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` -passout pass:`grep output_password server.cnf | sed 's/.*=//;s/^ *//'` openssl dhparam -out dh 1024 Exec-Program: returned: 0 Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } } server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 ERROR: Failed to open socket: cannot bind socket: Address already in use /usr/local/etc/raddb/radiusd.conf[236]: Error binding to port for 0.0.0.0port 1812 ¿a que se debe este error? Why is this wrong?