Hi All, That's my first e-mail and freeradius installation. Sorry if I didn't give you all info required or if my e-mail is wrong. I just finished to set up freeradius with MySQL and daloRADIUS on my Raspi. Exciting!!! (I followed this link - http://www.binaryheartbeat.net/2013/12/raspberry-pi-based-freeradius-server.... ) I added a user via daloRADIUS, I can see the entry in MySQL but I m not able to authenticate my wifi device. I enabled the debug mode with freeradius-XXX command and I got as following: rad_recv: Access-Request packet from host 192.168.0.5 port 48785, id=0, length=121 User-Name = "wiko" NAS-IP-Address = 192.168.0.5 Called-Station-Id = "54a0505814c4" Calling-Station-Id = "00738da980df" NAS-Identifier = "54a0505814c4" NAS-Port = 54 Framed-MTU = 1400 NAS-Port-Type = Wireless-802.11 EAP-Message = 0x020000090177696b6f Message-Authenticator = 0x3fea51568bbe9b1d3e4803bed98db11b Fri Sep 18 21:57:15 2015 : Info: # Executing section authorize from file /etc/freeradius/sites-enabled/default Fri Sep 18 21:57:15 2015 : Info: +- entering group authorize {...} Fri Sep 18 21:57:15 2015 : Info: ++[preprocess] returns ok Fri Sep 18 21:57:15 2015 : Info: ++[chap] returns noop Fri Sep 18 21:57:15 2015 : Info: ++[mschap] returns noop Fri Sep 18 21:57:15 2015 : Info: ++[digest] returns noop Fri Sep 18 21:57:15 2015 : Info: [suffix] No '@' in User-Name = "wiko", looking up realm NULL Fri Sep 18 21:57:15 2015 : Info: [suffix] No such realm "NULL" Fri Sep 18 21:57:15 2015 : Info: ++[suffix] returns noop Fri Sep 18 21:57:15 2015 : Info: [eap] EAP packet type response id 0 length 9 Fri Sep 18 21:57:15 2015 : Info: [eap] No EAP Start, assuming it's an on-going EAP conversation Fri Sep 18 21:57:15 2015 : Info: ++[eap] returns updated Fri Sep 18 21:57:15 2015 : Info: ++[files] returns noop Fri Sep 18 21:57:15 2015 : Info: [sql] expand: %{User-Name} -> wiko Fri Sep 18 21:57:15 2015 : Info: [sql] sql_set_user escaped user --> 'wiko' Fri Sep 18 21:57:15 2015 : Debug: rlm_sql (sql): Reserving sql socket id: 2 Fri Sep 18 21:57:15 2015 : Info: [sql] expand: SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'wiko' ORDER BY id Fri Sep 18 21:57:15 2015 : Info: [sql] User found in radcheck table Fri Sep 18 21:57:15 2015 : Info: [sql] expand: SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id -> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'wiko' ORDER BY id Fri Sep 18 21:57:15 2015 : Info: [sql] expand: SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT groupname FROM radusergroup WHERE username = 'wiko' ORDER BY priority Fri Sep 18 21:57:15 2015 : Info: [sql] expand: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = 'WiFi_Users' ORDER BY id Fri Sep 18 21:57:15 2015 : Info: [sql] User found in group WiFi_Users Fri Sep 18 21:57:15 2015 : Info: [sql] expand: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{Sql-Group}' ORDER BY id -> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = 'WiFi_Users' ORDER BY id Fri Sep 18 21:57:15 2015 : Debug: rlm_sql (sql): Released sql socket id: 2 Fri Sep 18 21:57:15 2015 : Info: ++[sql] returns ok Fri Sep 18 21:57:15 2015 : Info: ++[expiration] returns noop Fri Sep 18 21:57:15 2015 : Info: ++[logintime] returns noop Fri Sep 18 21:57:15 2015 : Info: [pap] WARNING: Auth-Type already set. Not setting to PAP Fri Sep 18 21:57:15 2015 : Info: ++[pap] returns noop Fri Sep 18 21:57:15 2015 : Info: Found Auth-Type = Accept Fri Sep 18 21:57:15 2015 : Info: Auth-Type = Accept, accepting the user Fri Sep 18 21:57:15 2015 : Info: # Executing section post-auth from file /etc/freeradius/sites-enabled/default Fri Sep 18 21:57:15 2015 : Info: +- entering group post-auth {...} Fri Sep 18 21:57:15 2015 : Info: [sql] expand: %{User-Name} -> wiko Fri Sep 18 21:57:15 2015 : Info: [sql] sql_set_user escaped user --> 'wiko' Fri Sep 18 21:57:15 2015 : Info: [sql] expand: %{User-Password} -> Fri Sep 18 21:57:15 2015 : Info: [sql] ... expanding second conditional Fri Sep 18 21:57:15 2015 : Info: [sql] expand: %{Chap-Password} -> Fri Sep 18 21:57:15 2015 : Info: [sql] expand: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') -> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'wiko', '', 'Access-Accept', '2015-09-18 21:57:15') Fri Sep 18 21:57:15 2015 : Debug: rlm_sql (sql) in sql_postauth: query is INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'wiko', '', 'Access-Accept', '2015-09-18 21:57:15') Fri Sep 18 21:57:15 2015 : Debug: rlm_sql (sql): Reserving sql socket id: 1 Fri Sep 18 21:57:15 2015 : Debug: rlm_sql (sql): Released sql socket id: 1 Fri Sep 18 21:57:15 2015 : Info: ++[sql] returns ok Fri Sep 18 21:57:15 2015 : Info: ++[exec] returns noop Sending Access-Accept of id 0 to 192.168.0.5 port 48785 Fri Sep 18 21:57:15 2015 : Info: Finished request 1. Fri Sep 18 21:57:15 2015 : Debug: Going to the next request Fri Sep 18 21:57:15 2015 : Debug: Waking up in 4.9 seconds. Fri Sep 18 21:57:20 2015 : Info: Cleaning up request 1 ID 0 with timestamp +95 Fri Sep 18 21:57:20 2015 : Info: Ready to process requests. I don't understand the majority of those messages. Can someone help me to understand where is the error? Thanks Federico