Connection Lost, tls resumption error
Hi, in my enviroment I got three AP's runnning, all with the same essid, after a while the connection seems lost and a reconnection starts to another AP and then I get the resumption error but I have no idea why I lost the connection. No Errors in radius debug and a good reception is given. The resumption error can be only avoid with restarting the wirless device. Thanks
To save other the trouble I will ask the obvious: 1) what does the RADIUS debug log say, please post it here IN FULL, do not clip out the portion you think you need. 2) have you checked the config on the client and the AP? 3) What part of this problem do you think is a RADIUS issue, and why? Jake Sallee Godfather of Bandwidth System Engineer University of Mary Hardin-Baylor 900 College St. Belton, Texas 76513 Fone: 254-295-4658 Phax: 254-295-4221 -----Original Message----- From: freeradius-users-bounces+jake.sallee=umhb.edu@lists.freeradius.org [mailto:freeradius-users-bounces+jake.sallee=umhb.edu@lists.freeradius.org] On Behalf Of Andreas Rudat Sent: Wednesday, November 30, 2011 8:25 AM To: FreeRadius users mailing list Subject: Connection Lost, tls resumption error Hi, in my enviroment I got three AP's runnning, all with the same essid, after a while the connection seems lost and a reconnection starts to another AP and then I get the resumption error but I have no idea why I lost the connection. No Errors in radius debug and a good reception is given. The resumption error can be only avoid with restarting the wirless device. Thanks - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Andreas Rudat wrote:
in my enviroment I got three AP's runnning, all with the same essid, after a while the connection seems lost
WHAT connection? If it's the connection between the AP and the PC, this isn't a RADIUS issue.
and a reconnection starts to another AP and then I get the resumption error but I have no idea why I lost the connection. No Errors in radius debug and a good reception is given.
The AP is responsible for sending RADIUS packets saying a connection is down. If it doesn't send those packets, buy an AP which does send them.
The resumption error can be only avoid with restarting the wirless device.
Sounds like an AP problem to me. Alan DeKok.
Am 30.11.2011 15:53, schrieb Alan DeKok:
Andreas Rudat wrote:
in my enviroment I got three AP's runnning, all with the same essid, after a while the connection seems lost WHAT connection?
If it's the connection between the AP and the PC, this isn't a RADIUS issue. I only saw that came in a new challange from the other AP.
and a reconnection starts to another AP and then I get the resumption error but I have no idea why I lost the connection. No Errors in radius debug and a good reception is given. The AP is responsible for sending RADIUS packets saying a connection is down. If it doesn't send those packets, buy an AP which does send them.
The resumption error can be only avoid with restarting the wirless device. Sounds like an AP problem to me.
Alan DeKok. perhaps. I tried it now with three devices and three users and it works fine for an hour, no connection problem again, it could be that I used one user name twice before.
So i hope it is solved with that.
participants (3)
-
Alan DeKok -
Andreas Rudat -
Sallee, Stephen (Jake)