Thank you Arran for quick reply. Since the NAS(s) will be in other networks, they will appear to my server as dynamic *public ips* and sometimes the NAS(s) will be multiple in one external NATed network (such will appear as from 1 public ip). In this case I will need to specify a range of puplic ips?? Don't know am making sense. Grace ----- Original Message ----- From: Arran Cudbard-Bell To: FreeRadius users mailing list Sent: Friday, August 26, 2011 2:55 PM Subject: Re: A trick for configuring freerad to authenticate multiple NAS withdynamic IPs On 26 Aug 2011, at 11:49, Grace M. wrote: Guyz, I have FreeRADIUS Version 2.1.10 working with mysql to authenticate uses connected to a number of NAS(s). Now, I would like to authenticate NAS(s) which should connect to my freerad from other networks (outside my lan) which have dynamic IPs. Anyone with a trick on how to configure clients.conf for that? You can specify IP ranges for clients? Would this help? Or are the dynamic clients extra dynamic? -Arran Arran Cudbard-Bell a.cudbardb@freeradius.org RADIUS - Half the complexity of Diameter ------------------------------------------------------------------------------ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Again thanks Arran. This is quite a handful! A quick reading about radsec (http://wiki.freeradius.org/RadSec) shows that its not supported by freeradius?? What about the "encrypted tunnel" way, can you lead me to a tutorial or MAN page that may help me? Many thanks. Grace. ----- Original Message ----- From: Arran Cudbard-Bell To: FreeRadius users mailing list Sent: Friday, August 26, 2011 3:23 PM Subject: Re: A trick for configuring freerad to authenticate multiple NASwithdynamic IPs On 26 Aug 2011, at 12:08, Grace M. wrote: Thank you Arran for quick reply. Since the NAS(s) will be in other networks, they will appear to my server as dynamic *public ips* and sometimes the NAS(s) will be multiple in one external NATed network (such will appear as from 1 public ip). In this case I will need to specify a range of puplic ips?? Yes, either that or use the dynamic-clients virtual server in raddb/sites-available to just accept any client. Then use the same shared secret for all external clients. If you're using an EAP method with some kind of TLS layer then the shared secret doesn't really do anything useful, other than providing crude protection against DoS attacks (even then that won't always work). Incidentally if you are doing PAP or CHAP then you should not be sending the RADIUS packets over a public network without using RADSEC or running them through some sort of encrypted tunnel. -Arran Don't know am making sense. Grace ----- Original Message ----- From: Arran Cudbard-Bell To: FreeRadius users mailing list Sent: Friday, August 26, 2011 2:55 PM Subject: Re: A trick for configuring freerad to authenticate multiple NAS withdynamic IPs On 26 Aug 2011, at 11:49, Grace M. wrote: Guyz, I have FreeRADIUS Version 2.1.10 working with mysql to authenticate uses connected to a number of NAS(s). Now, I would like to authenticate NAS(s) which should connect to my freerad from other networks (outside my lan) which have dynamic IPs. Anyone with a trick on how to configure clients.conf for that? You can specify IP ranges for clients? Would this help? Or are the dynamic clients extra dynamic? -Arran Arran Cudbard-Bell a.cudbardb@freeradius.org RADIUS - Half the complexity of Diameter -------------------------------------------------------------------------- - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html Arran Cudbard-Bell a.cudbardb@freeradius.org RADIUS - Half the complexity of Diameter ------------------------------------------------------------------------------ - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html