Hi, I am running 2.1.12 in an attempt to auth Wimax users. However I am having difficulty defining TLVs for WiMAX-QoS-Descriptor and associated WiMAX-Packet-Flow-Descriptor I used a post on the matter in the freeradius mailing list which suggested something to the effect of: INSERT INTO radgroupreply (groupname, attribute, op, value) VALUES ('WiMAX_Test3', 'WiMAX-QoS-Id', ':=', '101'), ('WiMAX_Test3', 'WiMAX-Service-Class-Name', ':=', 'DATA'), ('WiMAX_Test3', 'WiMAX-Schedule-Type', ':=', 'Best-Effort'), ('WiMAX_Test3', 'WiMAX-Traffic-Priority', ':=', '1'), ('WiMAX_Test3', 'WiMAX-Maximum-Sustained-Traffic-Rate', ':=','512000'), ('WiMAX_Test3', 'WiMAX-Reduced-Resources-Code', ':=', '1'), ('WiMAX_Test3', 'WiMAX-Packet-Data-Flow-Id', ':=', '21'), ('WiMAX_Test3', 'WiMAX-Service-Data-Flow-Id', ':=', '21'), ('WiMAX_Test3', 'WiMAX-Direction', ':=', '1'), ('WiMAX_Test3', 'WiMAX-Activation-Trigger', ':=', '15'), ('WiMAX_Test3', 'WiMAX-Transport-Type', ':=', 'IPv4-CS'), ('WiMAX_Test3', 'WiMAX-Uplink-QOS-Id', ':=', '101'), ('WiMAX_Test3', 'WiMAX-Uplink-Classifier', ':=', 'permit in any src any dst any priority 1'), ...etc This did not work, as the greenpacket SM keeps on trying to connect as if it is not authenticated, despite the following attributes being returned in the Access-Accept packet: Sending Access-Accept of id 84 to 10.11.12.13 port 1812 Framed-IP-Address := XXX.XX.12.12 Framed-IP-Netmask := 255.255.255.224 WiMAX-DNS-Server := XXX.XX.12.65 Framed-Route := "XXX.XX.12.30" WiMAX-QoS-Id := 101 WiMAX-Service-Class-Name := "DATA" WiMAX-Schedule-Type := Best-Effort WiMAX-Traffic-Priority := 1 WiMAX-Maximum-Sustained-Traffic-Rate := 512000 WiMAX-Reduced-Resources-Code := 1 WiMAX-Packet-Data-Flow-Id := 22 WiMAX-Service-Data-Flow-Id := 22 WiMAX-Direction := Downlink WiMAX-Activation-Trigger := 15 WiMAX-Transport-Type := IPv4-CS WiMAX-Uplink-QOS-Id := 101 WiMAX-Uplink-Classifier := "permit in any src any dst any priority 1" WiMAX-QoS-Id += 102 WiMAX-Service-Class-Name += "DATA" WiMAX-Schedule-Type += Best-Effort WiMAX-Traffic-Priority += 1 WiMAX-Maximum-Sustained-Traffic-Rate += 400000 WiMAX-Reduced-Resources-Code += 1 WiMAX-Downlink-QOS-Id := 102 WiMAX-Downlink-Classifier := "permit in any src any dst any priority 1" MS-MPPE-Recv-Key = 0xdd5af25dadbfeba854cc0c6a5694abe0636104f1551530a9537855ecb6629d7e MS-MPPE-Send-Key = 0x93064994b3908d600cdab33f17742a4de175db703101a8cd5019b0384a885d98 EAP-Message = 0x03040004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "{am=1}00E6D4F0ED7C281D867BE1534026CDA8IC3513" Finished request 4. I thought i would add an attribute pair to be explicit that I am defining TLVs, by inserting the following rows in the database (at the appropriate rows by id): ('WiMAX_Test3', 'WiMAX-QoS-Descriptor', '=', '...'), ('WiMAX_Test3', 'WiMAX-Packet-Flow-Descriptor', '=', '...'), ...etc but i then get the error specified in the subject above. Can anyone shed light on how to correctly populate radgroupreply to ensure proper definition of WiMAX TLVs? Or perhaps I am doing something else wrong? Hopefully, JamesTM -- Irrationally held truths may be more harmful than reasoned errors. - Thomas H. Huxley