Installation failure during make and general confusion
Hello, Recently started as a part time system admin at this work, and in an effort to upgrade our systems we're looking at installing a RADIUS server. We only have 1 office, with around 50 employees, who all have the same access rights (just plain Internet access). As such the idea is to set up a very straightforward authentication RADIUS server, no need for accounting yet. My eye spotted freeradius, and I've started working with it. Throughout the Internet I found a mixed bag of tutorials (quite confusing tbh) who mostly all suggest to run apt-get install freeradius and just work with that. Now I've tried that but ran into issues when moving towards TTLS (maybe another email will follow once I have set that up). I also found the git repo, and have cloned this (I'm on the v4 branch), however, the ./configure runs properly fine. I have attempted to run the ./configure as both normal user, and as root, both with the same output (they complete). However running the make is where issues arise. I'm not getting very far in this entire endeavor. CC src/protocols/dhcpv4/packet.c In file included from src/protocols/dhcpv4/packet.c:31:0: src/freeradius-devel/dhcpv4/dhcpv4.h:138:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcpv4_udp_packet_recv(int sockfd); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:139:31: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_udp_packet_send(RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:146:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcpv4_packet_ok(uint8_t const *data, ssize_t data_len, fr_ipaddr_t src_ipaddr, ^ src/freeradius-devel/dhcpv4/dhcpv4.h:169:30: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_decode(RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:171:30: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_encode(RADIUS_PACKET *packet); ^ In file included from src/protocols/dhcpv4/packet.c:31:0: src/freeradius-devel/dhcpv4/dhcpv4.h:180:70: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_raw_packet_send(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:182:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcv4_raw_packet_recv(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *request); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:182:79: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcv4_raw_packet_recv(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *request); ^ src/protocols/dhcpv4/packet.c:101:29: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_decode(RADIUS_PACKET *packet) ^ src/protocols/dhcpv4/packet.c:295:29: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_encode(RADIUS_PACKET *packet) ^ scripts/boiler.mk:635: recipe for target '/home/vagrant/freeradius-server/build/objs/src/protocols/dhcpv4/packet.lo' failed make: *** [/home/vagrant/freeradius-server/build/objs/src/protocols/dhcpv4/packet.lo] Error 1 this is the output I'm getting from make. As such my questions are the following: 1) how to fix this issue? 2) should I just ignore the entire git repo and straightforward run apt-get install freeradius BR, Mathieu
dont use the apt-get version unless it provides you with 3.0.15 . - use git but get 3.0.15 and not 4 - 4 is very bleeding edge alan On 19 July 2017 at 11:31, Mathieu Devos <mathieu.devos@intopalo.com> wrote:
Hello,
Recently started as a part time system admin at this work, and in an effort to upgrade our systems we're looking at installing a RADIUS server. We only have 1 office, with around 50 employees, who all have the same access rights (just plain Internet access). As such the idea is to set up a very straightforward authentication RADIUS server, no need for accounting yet.
My eye spotted freeradius, and I've started working with it. Throughout the Internet I found a mixed bag of tutorials (quite confusing tbh) who mostly all suggest to run apt-get install freeradius and just work with that. Now I've tried that but ran into issues when moving towards TTLS (maybe another email will follow once I have set that up). I also found the git repo, and have cloned this (I'm on the v4 branch), however, the ./configure runs properly fine.
I have attempted to run the ./configure as both normal user, and as root, both with the same output (they complete). However running the make is where issues arise. I'm not getting very far in this entire endeavor.
CC src/protocols/dhcpv4/packet.c In file included from src/protocols/dhcpv4/packet.c:31:0: src/freeradius-devel/dhcpv4/dhcpv4.h:138:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcpv4_udp_packet_recv(int sockfd); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:139:31: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_udp_packet_send(RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:146:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcpv4_packet_ok(uint8_t const *data, ssize_t data_len, fr_ipaddr_t src_ipaddr, ^ src/freeradius-devel/dhcpv4/dhcpv4.h:169:30: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_decode(RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:171:30: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_encode(RADIUS_PACKET *packet); ^ In file included from src/protocols/dhcpv4/packet.c:31:0: src/freeradius-devel/dhcpv4/dhcpv4.h:180:70: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_raw_packet_send(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:182:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcv4_raw_packet_recv(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *request); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:182:79: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcv4_raw_packet_recv(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *request); ^ src/protocols/dhcpv4/packet.c:101:29: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_decode(RADIUS_PACKET *packet) ^ src/protocols/dhcpv4/packet.c:295:29: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_encode(RADIUS_PACKET *packet) ^ scripts/boiler.mk:635: recipe for target '/home/vagrant/freeradius-server/build/objs/src/protocols/dhcpv4/packet.lo' failed make: *** [/home/vagrant/freeradius-server/build/objs/src/protocols/dhcpv4/packet.lo] Error 1
this is the output I'm getting from make. As such my questions are the following: 1) how to fix this issue? 2) should I just ignore the entire git repo and straightforward run apt-get install freeradius
BR, Mathieu
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi, Thanks for the quick reply, since only 2.6.x is available on aptitude, I have continued attempting to build it from the git repo. git checkout v3.0.x followed by make clean && ./configure && make && make install -- now runs a whole lot further. ./configure - fully runs, however I had to add --disable-developer because it found the .git repo and straight up assumed I was a dev make - fully runs make install - fails on the following line: make: *** No rule to make target 'src/modules/rlm_lua/example.lua', needed by '/usr/local/etc/raddb/mods-config/lua/example.lua'. Stop. Attempted to run as normal user and as su, both resolve to the same issue. Any pointers to recent tutorials would also be greatly appreciated, feeling quite lost and spamming mailing lists is not something I aim to do (everybody got more important things to address instead of dealing with a noob). - Mathieu On Wed, Jul 19, 2017 at 1:44 PM, Alan Buxey <alan.buxey@gmail.com> wrote:
dont use the apt-get version unless it provides you with 3.0.15 . - use git but get 3.0.15 and not 4 - 4 is very bleeding edge
alan
On 19 July 2017 at 11:31, Mathieu Devos <mathieu.devos@intopalo.com> wrote:
Hello,
Recently started as a part time system admin at this work, and in an effort to upgrade our systems we're looking at installing a RADIUS server. We only have 1 office, with around 50 employees, who all have the same access rights (just plain Internet access). As such the idea is to set up a very straightforward authentication RADIUS server, no need for accounting yet.
My eye spotted freeradius, and I've started working with it. Throughout the Internet I found a mixed bag of tutorials (quite confusing tbh) who mostly all suggest to run apt-get install freeradius and just work with that. Now I've tried that but ran into issues when moving towards TTLS (maybe another email will follow once I have set that up). I also found the git repo, and have cloned this (I'm on the v4 branch), however, the ./configure runs properly fine.
I have attempted to run the ./configure as both normal user, and as root, both with the same output (they complete). However running the make is where issues arise. I'm not getting very far in this entire endeavor.
CC src/protocols/dhcpv4/packet.c In file included from src/protocols/dhcpv4/packet.c:31:0: src/freeradius-devel/dhcpv4/dhcpv4.h:138:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcpv4_udp_packet_recv(int sockfd); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:139:31: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_udp_packet_send(RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:146:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcpv4_packet_ok(uint8_t const *data, ssize_t data_len, fr_ipaddr_t src_ipaddr, ^ src/freeradius-devel/dhcpv4/dhcpv4.h:169:30: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_decode(RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:171:30: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_encode(RADIUS_PACKET *packet); ^ In file included from src/protocols/dhcpv4/packet.c:31:0: src/freeradius-devel/dhcpv4/dhcpv4.h:180:70: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_raw_packet_send(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *packet); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:182:1: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcv4_raw_packet_recv(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *request); ^ src/freeradius-devel/dhcpv4/dhcpv4.h:182:79: error: unknown type name ‘RADIUS_PACKET’ RADIUS_PACKET *fr_dhcv4_raw_packet_recv(int sockfd, struct sockaddr_ll *p_ll, RADIUS_PACKET *request); ^ src/protocols/dhcpv4/packet.c:101:29: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_decode(RADIUS_PACKET *packet) ^ src/protocols/dhcpv4/packet.c:295:29: error: unknown type name ‘RADIUS_PACKET’ int fr_dhcpv4_packet_encode(RADIUS_PACKET *packet) ^ scripts/boiler.mk:635: recipe for target '/home/vagrant/freeradius-server/build/objs/src/protocols/dhcpv4/packet.lo' failed make: *** [/home/vagrant/freeradius-server/build/objs/src/protocols/dhcpv4/packet.lo] Error 1
this is the output I'm getting from make. As such my questions are the following: 1) how to fix this issue? 2) should I just ignore the entire git repo and straightforward run apt-get install freeradius
BR, Mathieu
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 19 Jul 2017, at 07:31, Mathieu Devos <mathieu.devos@intopalo.com> wrote:
Hi,
Thanks for the quick reply, since only 2.6.x is available on aptitude, I have continued attempting to build it from the git repo. git checkout v3.0.x followed by make clean && ./configure && make && make install -- now runs a whole lot further.
./configure - fully runs, however I had to add --disable-developer because it found the .git repo and straight up assumed I was a dev
Because people who build from git generally are. There are tar balls available to download both from the website and GitHub.
make - fully runs make install - fails on the following line:
make: *** No rule to make target 'src/modules/rlm_lua/example.lua', needed by '/usr/local/etc/raddb/mods-config/lua/example.lua'. Stop.
You have files from the v4.0.x branch in your working directory. Use git clean to remove them. -Arran
On Jul 19, 2017, at 6:31 AM, Mathieu Devos <mathieu.devos@intopalo.com> wrote
I also found the git repo, and have cloned this (I'm on the v4 branch), however, the ./configure runs properly fine.
Uh... why? Got to http://freeradius.org Click the "Version 3.0.15" link on the main page. You will get the most recently released version. You've spent a lot of time doing work which should instead have taken you about 10 seconds. Alan DeKok.
participants (4)
-
Alan Buxey -
Alan DeKok -
Arran Cudbard-Bell -
Mathieu Devos