Hello I have a problem with password: Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 0 to 10.0.0.245 port 1038 Waking up in 4 seconds... rad_recv: Access-Request packet from host 10.0.0.245:1040, id=0, length=198 Message-Authenticator = 0x6ae79da3858e9eed95661e0a14026810 Service-Type = Framed-User User-Name = "teste" Framed-MTU = 1488 Called-Station-Id = "00-1A-C1-8D-DF-C0:radius_SA" Calling-Station-Id = "00-16-CF-5D-AB-87" NAS-Identifier = "3Com Access Point 7760" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000a017465737465 NAS-IP-Address = 10.0.0.245 NAS-Port = 1 NAS-Port-Id = "STA port # 1" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 users: Matched entry teste at line 59 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns ok) for request 3 rad_check_password: Found Auth-Type Local auth: type Local auth: No User-Password or CHAP-Password attribute in the request auth: Failed to validate the user. Delaying request 3 for 1 seconds Finished request 3 Any help?? Grateful, Ed. --------------------------------- Abra sua conta no Yahoo! Mail, o único sem limite de espaço para armazenamento!
Am Donnerstag, 14. Februar 2008 09:22:09 schrieb Eduardo Lima:
Hello I have a problem with password:
Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 10.0.0.245:1040, id=0, length=198 Message-Authenticator = 0x6ae79da3858e9eed95661e0a14026810 Service-Type = Framed-User User-Name = "teste" Framed-MTU = 1488 Called-Station-Id = "00-1A-C1-8D-DF-C0:radius_SA" Calling-Station-Id = "00-16-CF-5D-AB-87" NAS-Identifier = "3Com Access Point 7760" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000a017465737465 NAS-IP-Address = 10.0.0.245 NAS-Port = 1 NAS-Port-Id = "STA port # 1"
Any help??
The request is from an Access Point trying to do 802.1x authentication, i.e. EAP. For some reason your server does not want to process EAP. Did you by any chance comment out the mentions of eap in authorize and authenticate? If so, why? EAP will only work if EAP is enabled. Stefan -- Stefan WINTER Stiftung RESTENA - Réseau Téléinformatique de l'Education Nationale et de la Recherche Ingenieur Forschung & Entwicklung 6, rue Richard Coudenhove-Kalergi L-1359 Luxembourg E-Mail: stefan.winter@restena.lu Tel.: +352 424409-1 http://www.restena.lu Fax: +352 422473
participants (2)
-
Eduardo Lima -
Stefan Winter