Hello. I've got LDAP users, with Samba passwords(amongst other attributes) as sambaNTPassword <http://ldap.telbridge/ldapadmin/cmd.php?cmd=schema&server_id=1&view=attributes&viewvalue=sambantpassword>, and try to authenticate users (windows10,11) to access LAN through AccessPoint(192.168.176.5) using those passwords since radius and ldap do not work good together. According to table, windows default mschap(or mschapv2) works only with ntlm_auth(obviously i dont want do store passwords as cleartext in ldap) so im trying to use samba pass as those are stored as some hashes. I should mention that my config work if passwords in ldap are cleartext, if any other storage method - authentication fail. For testing I use snakeoil certs by making them after installation. Config files are mostly in default. Ldap on remote host(some centos). Could anybody check my debug below with any suggestions with fixes? FreeRADIUS Version 3.2.1 Copyright (C) 1999-2022 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/sql including configuration file /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/pap including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/echo including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/rfc7542 including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/dhcp including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/operator-name including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/default including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel main {  security {      user = "freerad"      group = "freerad"      allow_core_dumps = no  }     name = "freeradius"     prefix = "/usr"     localstatedir = "/var"     logdir = "/var/log/freeradius"     run_dir = "/var/run/freeradius" } main {     name = "freeradius"     prefix = "/usr"     localstatedir = "/var"     sbindir = "/usr/sbin"     logdir = "/var/log/freeradius"     run_dir = "/var/run/freeradius"     libdir = "/usr/lib/freeradius"     radacctdir = "/var/log/freeradius/radacct"     hostname_lookups = no     max_request_time = 30     cleanup_delay = 5     max_requests = 16384     postauth_client_lost = no     pidfile = "/var/run/freeradius/freeradius.pid"     checkrad = "/usr/sbin/checkrad"     debug_level = 0     proxy_requests = yes  log {      stripped_names = no      auth = no      auth_badpass = no      auth_goodpass = no      colourise = yes      msg_denied = "You are already logged in - access denied"  }  resources {  }  security {      max_attributes = 200      reject_delay = 1.000000      status_server = yes  } } radiusd: #### Loading Realms and Home Servers ####  proxy server {      retry_delay = 5      retry_count = 3      default_fallback = no      dead_time = 120      wake_all_if_all_dead = no  }  home_server localhost {      ipaddr = 127.0.0.1      port = 1812      type = "auth"      secret = <<< secret >>>      response_window = 20.000000      response_timeouts = 1      max_outstanding = 65536      zombie_period = 40      status_check = "status-server"      ping_interval = 30      check_interval = 30      check_timeout = 4      num_answers_to_alive = 3      revive_interval = 120   limit {       max_connections = 16       max_requests = 0       lifetime = 0       idle_timeout = 0   }   coa {       irt = 2       mrt = 16       mrc = 5       mrd = 30   }   recv_coa {   }  }  home_server_pool my_auth_failover {     type = fail-over     home_server = localhost  }  realm example.com {     auth_pool = my_auth_failover  }  realm LOCAL {  } radiusd: #### Loading Clients ####  client localhost {      ipaddr = 127.0.0.1      require_message_authenticator = no      secret = <<< secret >>>      nas_type = "other"      proto = "*"   limit {       max_connections = 16       lifetime = 0       idle_timeout = 30   }  }  client ldap {      ipaddr = 192.168.84.44      require_message_authenticator = no      secret = <<< secret >>>   limit {       max_connections = 16       lifetime = 0       idle_timeout = 30   }  } Debugger not attached systemd watchdog is disabled  # Creating Auth-Type = mschap  # Creating Auth-Type = digest  # Creating Auth-Type = eap  # Creating Auth-Type = PAP  # Creating Auth-Type = CHAP  # Creating Auth-Type = MS-CHAP  # Creating Auth-Type = LDAP  # Creating Autz-Type = New-TLS-Connection radiusd: #### Instantiating modules ####  modules {   # Loaded module rlm_detail   # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   detail auth_log {       filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"       header = "%t"       permissions = 384       locking = no       escape_filenames = no       log_packet_header = no   }   # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   detail reply_log {       filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"       header = "%t"       permissions = 384       locking = no       escape_filenames = no       log_packet_header = no   }   # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   detail pre_proxy_log {       filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"       header = "%t"       permissions = 384       locking = no       escape_filenames = no       log_packet_header = no   }   # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   detail post_proxy_log {       filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"       header = "%t"       permissions = 384       locking = no       escape_filenames = no       log_packet_header = no   }   # Loaded module rlm_passwd   # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd   passwd etc_passwd {       filename = "/etc/passwd"       format = "*User-Name:Crypt-Password:"       delimiter = ":"       ignore_nislike = no       ignore_empty = yes       allow_multiple_keys = no       hash_size = 100   }   # Loaded module rlm_unix   # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix   unix {       radwtmp = "/var/log/freeradius/radwtmp"   } Creating attribute Unix-Group   # Loaded module rlm_replicate   # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate   # Loaded module rlm_exec   # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec   exec {       wait = no       input_pairs = "request"       shell_escape = yes       timeout = 10   }   # Loaded module rlm_expiration   # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration   # Loaded module rlm_soh   # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh   soh {       dhcp = yes   }   # Loaded module rlm_radutmp   # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp   radutmp {       filename = "/var/log/freeradius/radutmp"       username = "%{User-Name}"       case_sensitive = yes       check_with_nas = yes       permissions = 384       caller_id = yes   }   # Loaded module rlm_realm   # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm   realm IPASS {       format = "prefix"       delimiter = "/"       ignore_default = no       ignore_null = no   }   # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm   realm suffix {       format = "suffix"       delimiter = "@"       ignore_default = no       ignore_null = no   }   # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm   realm bangpath {       format = "prefix"       delimiter = "!"       ignore_default = no       ignore_null = no   }   # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm   realm realmpercent {       format = "suffix"       delimiter = "%"       ignore_default = no       ignore_null = no   }   # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm   realm ntdomain {       format = "prefix"       delimiter = "\\"       ignore_default = no       ignore_null = no   }   # Loaded module rlm_preprocess   # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess   preprocess {       huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"       hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"       with_ascend_hack = no       ascend_channels_per_line = 23       with_ntdomain_hack = no       with_specialix_jetstream_hack = no       with_cisco_vsa_hack = no       with_alvarion_vsa_hack = no   }   # Loaded module rlm_ldap   # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap   ldap {       server = "ldap.telbridge"       identity = "cn=Manager,o=Telbridge"       password = <<< secret >>>    sasl {    }       user_dn = "LDAP-UserDn"    user {        scope = "sub"        access_positive = yes     sasl {     }    }    group {        filter = "(objectClass=posixGroup)"        scope = "sub"        name_attribute = "cn"        membership_attribute = "memberOf"        cacheable_name = no        cacheable_dn = no        allow_dangling_group_ref = no    }    client {        filter = "(objectClass=radiusClient)"        scope = "sub"        base_dn = "ou=People,o=Telbridge"    }    profile {    }    options {        ldap_debug = 40        chase_referrals = yes        rebind = yes        net_timeout = 1        res_timeout = 10        srv_timelimit = 3        idle = 60        probes = 3        interval = 3    }    tls {        start_tls = no    }   } Creating attribute LDAP-Group   # Loaded module rlm_mschap   # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap   mschap {       use_mppe = yes       require_encryption = no       require_strong = no       with_ntdomain_hack = yes       ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}"    passchange {    }       allow_retry = yes       winbind_retry_with_normalised_username = no   }   # Loaded module rlm_chap   # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap   # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail   detail {       filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"       header = "%t"       permissions = 384       locking = no       escape_filenames = no       log_packet_header = no   }   # Loaded module rlm_dynamic_clients   # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients   # Loaded module rlm_sql   # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql   sql {       driver = "rlm_sql_mysql"       server = "localhost"       port = 3306       login = "radius"       password = <<< secret >>>       radius_db = "raddb"       read_groups = yes       read_profiles = yes       read_clients = yes       delete_stale_sessions = yes       sql_user_name = "%{User-Name}"       default_user_profile = ""       client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"       authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"       authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"       authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"       authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"       group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"       simul_count_query = "SELECT COUNT(*) FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)"       simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct a LEFT OUTER JOIN nasreload n USING (nasipaddress) WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL AND (a.acctstarttime > n.reloadtime OR n.reloadtime IS NULL)"       safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"       auto_escape = no    accounting {        reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"     type {      accounting-on {          query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime    = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"      }      accounting-off {          query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime    = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"      }      start {          query = "INSERT INTO radacct (acctsessionid, acctuniqueid,        username, realm, nasipaddress,        nasportid, nasporttype, acctstarttime,        acctupdatetime, acctstoptime, acctsessiontime,     acctauthentic, connectinfo_start, connectinfo_stop,     acctinputoctets, acctoutputoctets, calledstationid,     callingstationid, acctterminatecause, servicetype,        framedprotocol, framedipaddress, framedipv6address,    framedipv6prefix, framedinterfaceid, delegatedipv6prefix    ) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}' )"      }      interim-update {          query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"      }      stop {          query = "UPDATE radacct SET acctstoptime    = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime    = %{%{Acct-Session-Time}:-NULL}, acctinputoctets    = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"      }     }    }    post-auth {        reference = ".query"        query = "INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' )"    }   } rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked Creating attribute SQL-Group   # Loaded module rlm_digest   # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest   # Loaded module rlm_linelog   # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog   linelog {       filename = "/var/log/freeradius/linelog"       escape_filenames = no       syslog_severity = "info"       permissions = 384       format = "This is a log message for %{User-Name}"       reference = "messages.%{%{reply:Packet-Type}:-default}"   }   # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog   linelog log_accounting {       filename = "/var/log/freeradius/linelog-accounting"       escape_filenames = no       syslog_severity = "info"       permissions = 384       format = ""       reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"   }   # Loaded module rlm_utf8   # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8   # Loaded module rlm_attr_filter   # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter   attr_filter attr_filter.post-proxy {       filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"       key = "%{Realm}"       relaxed = no   }   # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter   attr_filter attr_filter.pre-proxy {       filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"       key = "%{Realm}"       relaxed = no   }   # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter   attr_filter attr_filter.access_reject {       filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"       key = "%{User-Name}"       relaxed = no   }   # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter   attr_filter attr_filter.access_challenge {       filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"       key = "%{User-Name}"       relaxed = no   }   # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter   attr_filter attr_filter.accounting_response {       filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"       key = "%{User-Name}"       relaxed = no   }   # Loading module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter   attr_filter attr_filter.coa {       filename = "/etc/freeradius/3.0/mods-config/attr_filter/coa"       key = "%{User-Name}"       relaxed = no   }   # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth   exec ntlm_auth {       wait = yes       program = "/usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key --domain=telbridge --username=%{mschap:User-Name} --password=%{User-Password}"       shell_escape = yes   }   # Loaded module rlm_files   # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files   files {       filename = "/etc/freeradius/3.0/mods-config/files/authorize"       acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"       preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"   }   # Loaded module rlm_unpack   # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack   # Loaded module rlm_logintime   # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime   logintime {       minimum_timeout = 60   }   # Loaded module rlm_pap   # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap   pap {       normalise = yes   }   # Loaded module rlm_eap   # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap   eap {       default_eap_type = "md5"       timer_expire = 60       ignore_unknown_eap_types = no       cisco_accounting_username_bug = no       max_sessions = 16384   }   # Loaded module rlm_always   # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always   always reject {       rcode = "reject"       simulcount = 0       mpp = no   }   # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always   always fail {       rcode = "fail"       simulcount = 0       mpp = no   }   # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always   always ok {       rcode = "ok"       simulcount = 0       mpp = no   }   # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always   always handled {       rcode = "handled"       simulcount = 0       mpp = no   }   # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always   always invalid {       rcode = "invalid"       simulcount = 0       mpp = no   }   # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always   always userlock {       rcode = "userlock"       simulcount = 0       mpp = no   }   # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always   always notfound {       rcode = "notfound"       simulcount = 0       mpp = no   }   # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always   always noop {       rcode = "noop"       simulcount = 0       mpp = no   }   # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always   always updated {       rcode = "updated"       simulcount = 0       mpp = no   }   # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp   radutmp sradutmp {       filename = "/var/log/freeradius/sradutmp"       username = "%{User-Name}"       case_sensitive = yes       check_with_nas = yes       permissions = 420       caller_id = no   }   # Loaded module rlm_expr   # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr   expr {       safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"   }   # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo   exec echo {       wait = yes       program = "/bin/echo %{User-Name}"       input_pairs = "request"       output_pairs = "reply"       shell_escape = yes   }   instantiate {   }   # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output   # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log   # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no   # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration   # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm   # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm   # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm   # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm   # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm   # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints   # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20513    accounting {        reference = "%{tolower:type.%{Acct-Status-Type}}"    }    post-auth {        reference = "."    } rlm_ldap (ldap): Initialising connection pool    pool {        start = 5        min = 3        max = 32        spare = 10        uses = 0        lifetime = 0        cleanup_interval = 30        idle_timeout = 60        retry_delay = 30        spread = no    } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful   # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth'   # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail   # Instantiating module "sql" from file /etc/freeradius/3.0/mods-enabled/sql rlm_sql_mysql: libmysql version: 3.3.8    mysql {     tls {         tls_required = no         check_cert = no         check_cert_cn = no     }        warnings = "auto"    } rlm_sql (sql): Attempting to connect to database "raddb" rlm_sql (sql): Initialising connection pool    pool {        start = 5        min = 3        max = 32        spare = 10        uses = 0        lifetime = 0        cleanup_interval = 30        idle_timeout = 60        retry_delay = 30        spread = no    } rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 rlm_sql (sql): Processing generate_sql_clients rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas rlm_sql (sql): Adding client 192.168.176.5 (AP_pow3) to global clients list rlm_sql (192.168.176.5): Client "AP_pow3" (sql) added rlm_sql (sql): Adding client 192.168.176.20 (komp) to global clients list rlm_sql (192.168.176.20): Client "komp" (sql) added rlm_sql (sql): Adding client 192.168.117.244 (telbsw11t) to global clients list rlm_sql (192.168.117.244): Client "telbsw11t" (sql) added rlm_sql (sql): Adding client 192.168.198.79 () to global clients list rlm_sql (192.168.198.79): Client "" (sql) added rlm_sql (sql): Released connection (0) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10   # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog   # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog   # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy   # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy   # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject   # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge   # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response   # Instantiating module "attr_filter.coa" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/coa   # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy   # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime   # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap   # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap    # Linked to sub-module rlm_eap_md5    # Linked to sub-module rlm_eap_gtc    gtc {        challenge = "Password: "        auth_type = "PAP"    }    # Linked to sub-module rlm_eap_tls    tls {        tls = "tls-common"    }    tls-config tls-common {        verify_depth = 0        ca_path = "/etc/freeradius/3.0/certs"        pem_file_type = yes        private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"        certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"        ca_file = "/etc/ssl/certs/ca-certificates.crt"        private_key_password = <<< secret >>>        fragment_size = 1024        include_length = yes        auto_chain = yes        check_crl = no        check_all_crl = no        ca_path_reload_interval = 0        cipher_list = "DEFAULT"        cipher_server_preference = no        reject_unknown_intermediate_ca = no        ecdh_curve = ""        tls_max_version = "1.2"        tls_min_version = "1.2"     cache {         enable = no         lifetime = 24         max_entries = 255     }     verify {         skip_if_ocsp_ok = no     }     ocsp {         enable = no         override_cert_url = yes         url = "http://127.0.0.1/ocsp/"         use_nonce = yes         timeout = 0         softfail = no     }    }    # Linked to sub-module rlm_eap_ttls    ttls {        tls = "tls-common"        default_eap_type = "md5"        copy_request_to_tunnel = no        use_tunneled_reply = no        virtual_server = "inner-tunnel"        include_length = yes        require_client_cert = no    } tls: Using cached TLS configuration from previous invocation    # Linked to sub-module rlm_eap_peap    peap {        tls = "tls-common"        default_eap_type = "mschapv2"        copy_request_to_tunnel = no        use_tunneled_reply = no        proxy_tunneled_request_as_eap = yes        virtual_server = "inner-tunnel"        soh = no        require_client_cert = no    } tls: Using cached TLS configuration from previous invocation    # Linked to sub-module rlm_eap_mschapv2    mschapv2 {        with_ntdomain_hack = no        send_error = no    }   # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always   # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always  } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server default { # from file /etc/freeradius/3.0/sites-enabled/default  # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type  # Loading authorize {...} Compiling Autz-Type New-TLS-Connection for attr Autz-Type  # Loading preacct {...}  # Loading accounting {...}  # Loading post-proxy {...}  # Loading post-auth {...} Compiling Post-Auth-Type REJECT for attr Post-Auth-Type Compiling Post-Auth-Type Challenge for attr Post-Auth-Type Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type } # server default server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel  # Loading authenticate {...} Compiling Auth-Type PAP for attr Auth-Type Compiling Auth-Type CHAP for attr Auth-Type Compiling Auth-Type MS-CHAP for attr Auth-Type Compiling Auth-Type LDAP for attr Auth-Type  # Loading authorize {...}  # Loading session {...}  # Loading post-proxy {...}  # Loading post-auth {...}  # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:336 Compiling Post-Auth-Type REJECT for attr Post-Auth-Type } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen {       type = "auth"       ipaddr = *       port = 0    limit {        max_connections = 16        lifetime = 0        idle_timeout = 30    } } listen {       type = "acct"       ipaddr = *       port = 0    limit {        max_connections = 16        lifetime = 0        idle_timeout = 30    } } listen {       type = "auth"       ipaddr = 127.0.0.1       port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 33535 Ready to process requests (0) Received Access-Request Id 108 from 192.168.176.5:32790 to 192.168.183.8:1812 length 170 (0)   User-Name = "dbloch3" (0)   NAS-IP-Address = 192.168.176.5 (0)   NAS-Identifier = "hello" (0)   NAS-Port = 0 (0)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (0)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (0)   Framed-MTU = 1400 (0)   NAS-Port-Type = Wireless-802.11 (0)   Connect-Info = "CONNECT 0Mbps 802.11b" (0)   EAP-Message = 0x0201000c0164626c6f636833 (0)   Message-Authenticator = 0x33dc36905d03ab6773cecbc7efe87481 (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0)   authorize { (0)     policy filter_username { (0)       if (&User-Name) { (0)       if (&User-Name)  -> TRUE (0)       if (&User-Name)  { (0)         if (&User-Name =~ / /) { (0)         if (&User-Name =~ / /)  -> FALSE (0)         if (&User-Name =~ /@[^@]*@/ ) { (0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (0)         if (&User-Name =~ /\.\./ ) { (0)         if (&User-Name =~ /\.\./ )  -> FALSE (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (0)         if (&User-Name =~ /\.$/)  { (0)         if (&User-Name =~ /\.$/)   -> FALSE (0)         if (&User-Name =~ /@\./)  { (0)         if (&User-Name =~ /@\./)   -> FALSE (0)       } # if (&User-Name)  = notfound (0)     } # policy filter_username = notfound (0)     [preprocess] = ok (0)     [chap] = noop (0)     [mschap] = noop (0)     [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (0) suffix: No such realm "NULL" (0)     [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 1 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0)     [eap] = ok (0)   } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0)   authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 2 length 22 (0) eap: EAP session adding &reply:State = 0x902f42bb902d4696 (0)     [eap] = handled (0)   } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0)   Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 108 from 192.168.183.8:1812 to 192.168.176.5:32790 length 80 (0)   EAP-Message = 0x010200160410dcec145a04fb26a764c8fa0e3c07d9ce (0)   Message-Authenticator = 0x00000000000000000000000000000000 (0)   State = 0x902f42bb902d4696ae439ed8c346540f (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 109 from 192.168.176.5:32790 to 192.168.183.8:1812 length 183 (1)   User-Name = "dbloch3" (1)   NAS-IP-Address = 192.168.176.5 (1)   NAS-Identifier = "hello" (1)   NAS-Port = 0 (1)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (1)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (1)   Framed-MTU = 1400 (1)   NAS-Port-Type = Wireless-802.11 (1)   Connect-Info = "CONNECT 0Mbps 802.11b" (1)   EAP-Message = 0x02020007031915 (1)   State = 0x902f42bb902d4696ae439ed8c346540f (1)   Message-Authenticator = 0xdf5057c3144f5e83d41e40a2f8fbda0e (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1)   authorize { (1)     policy filter_username { (1)       if (&User-Name) { (1)       if (&User-Name)  -> TRUE (1)       if (&User-Name)  { (1)         if (&User-Name =~ / /) { (1)         if (&User-Name =~ / /)  -> FALSE (1)         if (&User-Name =~ /@[^@]*@/ ) { (1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (1)         if (&User-Name =~ /\.\./ ) { (1)         if (&User-Name =~ /\.\./ )  -> FALSE (1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (1)         if (&User-Name =~ /\.$/)  { (1)         if (&User-Name =~ /\.$/)   -> FALSE (1)         if (&User-Name =~ /@\./)  { (1)         if (&User-Name =~ /@\./)   -> FALSE (1)       } # if (&User-Name)  = notfound (1)     } # policy filter_username = notfound (1)     [preprocess] = ok (1)     [chap] = noop (1)     [mschap] = noop (1)     [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (1) suffix: No such realm "NULL" (1)     [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 2 length 7 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1)     [eap] = updated (1)     [files] = noop (1) sql: EXPAND %{User-Name} (1) sql:    --> dbloch3 (1) sql: SQL-User-Name set to 'dbloch3' rlm_sql (sql): Reserved connection (1) (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (1) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'dbloch3' ORDER BY id (1) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'dbloch3' ORDER BY id (1) sql: WARNING: User not found in radcheck table. (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (1) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'dbloch3' ORDER BY priority (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'dbloch3' ORDER BY priority (1) sql: User not found in any groups rlm_sql (sql): Released connection (1) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 (1)     [sql] = notfound rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap:    --> (uid=dbloch3) (1) ldap: Performing search in "ou=People,o=Telbridge" with filter "(uid=dbloch3)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=dbloch3,ou=People,o=Telbridge" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF' (1) ldap: control:Cleartext-Password += '{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF' rlm_ldap (ldap): Released connection (0) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1)     [ldap] = updated (1)     [expiration] = noop (1)     [logintime] = noop (1) pap: WARNING: Config already contains a "known good" password (&control:Cleartext-Password).  Ignoring &control:Password-With-Header (1) pap: WARNING: Auth-Type already set.  Not setting to PAP (1)     [pap] = noop (1)   } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1)   authenticate { (1) eap: Expiring EAP session with state 0x902f42bb902d4696 (1) eap: Finished EAP session with state 0x902f42bb902d4696 (1) eap: Previous EAP request found for state 0x902f42bb902d4696, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: (TLS) Initiating new session (1) eap: Sending EAP Request (code 1) ID 3 length 6 (1) eap: EAP session adding &reply:State = 0x902f42bb912c5b96 (1)     [eap] = handled (1)   } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1)   Challenge { ... } # empty sub-section is ignored (1) session-state: Saving cached attributes (1)   Framed-MTU = 994 (1) Sent Access-Challenge Id 109 from 192.168.183.8:1812 to 192.168.176.5:32790 length 64 (1)   EAP-Message = 0x010300061920 (1)   Message-Authenticator = 0x00000000000000000000000000000000 (1)   State = 0x902f42bb912c5b96ae439ed8c346540f (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 110 from 192.168.176.5:32790 to 192.168.183.8:1812 length 615 (2)   User-Name = "dbloch3" (2)   NAS-IP-Address = 192.168.176.5 (2)   NAS-Identifier = "hello" (2)   NAS-Port = 0 (2)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (2)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (2)   Framed-MTU = 1400 (2)   NAS-Port-Type = Wireless-802.11 (2)   Connect-Info = "CONNECT 0Mbps 802.11b" (2)   EAP-Message = 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 (2)   State = 0x902f42bb912c5b96ae439ed8c346540f (2)   Message-Authenticator = 0x2bb2ce558544e7da3d334cf3271c45d2 (2) Restoring &session-state (2)   &session-state:Framed-MTU = 994 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2)   authorize { (2)     policy filter_username { (2)       if (&User-Name) { (2)       if (&User-Name)  -> TRUE (2)       if (&User-Name)  { (2)         if (&User-Name =~ / /) { (2)         if (&User-Name =~ / /)  -> FALSE (2)         if (&User-Name =~ /@[^@]*@/ ) { (2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (2)         if (&User-Name =~ /\.\./ ) { (2)         if (&User-Name =~ /\.\./ )  -> FALSE (2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (2)         if (&User-Name =~ /\.$/)  { (2)         if (&User-Name =~ /\.$/)   -> FALSE (2)         if (&User-Name =~ /@\./)  { (2)         if (&User-Name =~ /@\./)   -> FALSE (2)       } # if (&User-Name)  = notfound (2)     } # policy filter_username = notfound (2)     [preprocess] = ok (2)     [chap] = noop (2)     [mschap] = noop (2)     [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (2) suffix: No such realm "NULL" (2)     [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 3 length 437 (2) eap: Continuing tunnel setup (2)     [eap] = ok (2)   } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2)   authenticate { (2) eap: Expiring EAP session with state 0x902f42bb912c5b96 (2) eap: Finished EAP session with state 0x902f42bb912c5b96 (2) eap: Previous EAP request found for state 0x902f42bb912c5b96, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: (TLS) EAP Peer says that the final record size will be 427 bytes (2) eap_peap: (TLS) EAP Got all data (427 bytes) (2) eap_peap: (TLS) Handshake state - before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) Handshake state - Server before SSL initialization (2) eap_peap: (TLS) recv TLS 1.3 Handshake, ClientHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHello (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server hello (2) eap_peap: (TLS) send TLS 1.2 Handshake, Certificate (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write certificate (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerKeyExchange (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write key exchange (2) eap_peap: (TLS) send TLS 1.2 Handshake, ServerHelloDone (2) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (2) eap_peap: (TLS) Server : Need to read more data: SSLv3/TLS write server done (2) eap_peap: (TLS) In Handshake Phase (2) eap: Sending EAP Request (code 1) ID 4 length 1004 (2) eap: EAP session adding &reply:State = 0x902f42bb922b5b96 (2)     [eap] = handled (2)   } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2)   Challenge { ... } # empty sub-section is ignored (2) session-state: Saving cached attributes (2)   Framed-MTU = 994 (2)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (2)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (2) Sent Access-Challenge Id 110 from 192.168.183.8:1812 to 192.168.176.5:32790 length 1068 (2)   EAP-Message = 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 (2)   Message-Authenticator = 0x00000000000000000000000000000000 (2)   State = 0x902f42bb922b5b96ae439ed8c346540f (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 111 from 192.168.176.5:32790 to 192.168.183.8:1812 length 182 (3)   User-Name = "dbloch3" (3)   NAS-IP-Address = 192.168.176.5 (3)   NAS-Identifier = "hello" (3)   NAS-Port = 0 (3)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (3)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (3)   Framed-MTU = 1400 (3)   NAS-Port-Type = Wireless-802.11 (3)   Connect-Info = "CONNECT 0Mbps 802.11b" (3)   EAP-Message = 0x020400061900 (3)   State = 0x902f42bb922b5b96ae439ed8c346540f (3)   Message-Authenticator = 0x71f19e580328e6ceb85927dc5da7ce07 (3) Restoring &session-state (3)   &session-state:Framed-MTU = 994 (3)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3)   authorize { (3)     policy filter_username { (3)       if (&User-Name) { (3)       if (&User-Name)  -> TRUE (3)       if (&User-Name)  { (3)         if (&User-Name =~ / /) { (3)         if (&User-Name =~ / /)  -> FALSE (3)         if (&User-Name =~ /@[^@]*@/ ) { (3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (3)         if (&User-Name =~ /\.\./ ) { (3)         if (&User-Name =~ /\.\./ )  -> FALSE (3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (3)         if (&User-Name =~ /\.$/)  { (3)         if (&User-Name =~ /\.$/)   -> FALSE (3)         if (&User-Name =~ /@\./)  { (3)         if (&User-Name =~ /@\./)   -> FALSE (3)       } # if (&User-Name)  = notfound (3)     } # policy filter_username = notfound (3)     [preprocess] = ok (3)     [chap] = noop (3)     [mschap] = noop (3)     [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (3) suffix: No such realm "NULL" (3)     [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 4 length 6 (3) eap: Continuing tunnel setup (3)     [eap] = ok (3)   } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3)   authenticate { (3) eap: Expiring EAP session with state 0x902f42bb922b5b96 (3) eap: Finished EAP session with state 0x902f42bb922b5b96 (3) eap: Previous EAP request found for state 0x902f42bb922b5b96, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: (TLS) Peer ACKed our handshake fragment (3) eap: Sending EAP Request (code 1) ID 5 length 210 (3) eap: EAP session adding &reply:State = 0x902f42bb932a5b96 (3)     [eap] = handled (3)   } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3)   Challenge { ... } # empty sub-section is ignored (3) session-state: Saving cached attributes (3)   Framed-MTU = 994 (3)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (3)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (3) Sent Access-Challenge Id 111 from 192.168.183.8:1812 to 192.168.176.5:32790 length 268 (3)   EAP-Message = 0x010500d21900e0f4ca0bb5a5f3d95077c05847819f52e2fca7236306b0958d583e841cd47cf80f602b0690db40626a25e8e25caa9d0e51aa159d05e993460ee57d19c3a2f500bb35d1bf167f7125cb3200af5b0001d3c4803fe488fdf192686f94b376165843d62bcee496c5c2ccd8858a419c4fb1c499c3528076bf33289ecf6db9d866f244b303099683d54d8c4e1638d051f2e5cf7a86c03ccf60ed49b35a22ed64411adf11da9749409c1567c47a0f33df540a8cabfc0296bb37c4a738386861b299bdaa7cf4f516030300040e000000 (3)   Message-Authenticator = 0x00000000000000000000000000000000 (3)   State = 0x902f42bb932a5b96ae439ed8c346540f (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 112 from 192.168.176.5:32790 to 192.168.183.8:1812 length 279 (4)   User-Name = "dbloch3" (4)   NAS-IP-Address = 192.168.176.5 (4)   NAS-Identifier = "hello" (4)   NAS-Port = 0 (4)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (4)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (4)   Framed-MTU = 1400 (4)   NAS-Port-Type = Wireless-802.11 (4)   Connect-Info = "CONNECT 0Mbps 802.11b" (4)   EAP-Message = 0x0205006719800000005d160303002510000021206db0fc165e768e171195d7e481047ac3d72e7f19850eedc0fcdbefbea5d0576c14030300010116030300280000000000000000c900a4bb1d3a1f410d3806b65db302d46f2c3abebaf614f448cb392f11fed095 (4)   State = 0x902f42bb932a5b96ae439ed8c346540f (4)   Message-Authenticator = 0x0d15e19b79a02ecb2876d58f1b742340 (4) Restoring &session-state (4)   &session-state:Framed-MTU = 994 (4)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4)   authorize { (4)     policy filter_username { (4)       if (&User-Name) { (4)       if (&User-Name)  -> TRUE (4)       if (&User-Name)  { (4)         if (&User-Name =~ / /) { (4)         if (&User-Name =~ / /)  -> FALSE (4)         if (&User-Name =~ /@[^@]*@/ ) { (4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (4)         if (&User-Name =~ /\.\./ ) { (4)         if (&User-Name =~ /\.\./ )  -> FALSE (4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (4)         if (&User-Name =~ /\.$/)  { (4)         if (&User-Name =~ /\.$/)   -> FALSE (4)         if (&User-Name =~ /@\./)  { (4)         if (&User-Name =~ /@\./)   -> FALSE (4)       } # if (&User-Name)  = notfound (4)     } # policy filter_username = notfound (4)     [preprocess] = ok (4)     [chap] = noop (4)     [mschap] = noop (4)     [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (4) suffix: No such realm "NULL" (4)     [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 5 length 103 (4) eap: Continuing tunnel setup (4)     [eap] = ok (4)   } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4)   authenticate { (4) eap: Expiring EAP session with state 0x902f42bb932a5b96 (4) eap: Finished EAP session with state 0x902f42bb932a5b96 (4) eap: Previous EAP request found for state 0x902f42bb932a5b96, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: (TLS) EAP Peer says that the final record size will be 93 bytes (4) eap_peap: (TLS) EAP Got all data (93 bytes) (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write server done (4) eap_peap: (TLS) recv TLS 1.2 Handshake, ClientKeyExchange (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read client key exchange (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read change cipher spec (4) eap_peap: (TLS) recv TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS read finished (4) eap_peap: (TLS) send TLS 1.2 ChangeCipherSpec (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write change cipher spec (4) eap_peap: (TLS) send TLS 1.2 Handshake, Finished (4) eap_peap: (TLS) Handshake state - Server SSLv3/TLS write finished (4) eap_peap: (TLS) Handshake state - SSL negotiation finished successfully (4) eap_peap: (TLS) Connection Established (4) eap_peap:   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4) eap_peap:   TLS-Session-Version = "TLS 1.2" (4) eap: Sending EAP Request (code 1) ID 6 length 57 (4) eap: EAP session adding &reply:State = 0x902f42bb94295b96 (4)     [eap] = handled (4)   } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4)   Challenge { ... } # empty sub-section is ignored (4) session-state: Saving cached attributes (4)   Framed-MTU = 994 (4)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (4)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (4)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (4)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (4)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (4)   TLS-Session-Version = "TLS 1.2" (4) Sent Access-Challenge Id 112 from 192.168.183.8:1812 to 192.168.176.5:32790 length 115 (4)   EAP-Message = 0x0106003919001403030001011603030028a9bbdc6cd36d3d3235e2ded7f05d1998f1f0662232fae63293fe5189979e35908edb6ccc2547d6a9 (4)   Message-Authenticator = 0x00000000000000000000000000000000 (4)   State = 0x902f42bb94295b96ae439ed8c346540f (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 113 from 192.168.176.5:32790 to 192.168.183.8:1812 length 182 (5)   User-Name = "dbloch3" (5)   NAS-IP-Address = 192.168.176.5 (5)   NAS-Identifier = "hello" (5)   NAS-Port = 0 (5)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (5)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (5)   Framed-MTU = 1400 (5)   NAS-Port-Type = Wireless-802.11 (5)   Connect-Info = "CONNECT 0Mbps 802.11b" (5)   EAP-Message = 0x020600061900 (5)   State = 0x902f42bb94295b96ae439ed8c346540f (5)   Message-Authenticator = 0xd9053685a28d03ed41cb3e7e68f01411 (5) Restoring &session-state (5)   &session-state:Framed-MTU = 994 (5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5)   &session-state:TLS-Session-Version = "TLS 1.2" (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5)   authorize { (5)     policy filter_username { (5)       if (&User-Name) { (5)       if (&User-Name)  -> TRUE (5)       if (&User-Name)  { (5)         if (&User-Name =~ / /) { (5)         if (&User-Name =~ / /)  -> FALSE (5)         if (&User-Name =~ /@[^@]*@/ ) { (5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (5)         if (&User-Name =~ /\.\./ ) { (5)         if (&User-Name =~ /\.\./ )  -> FALSE (5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (5)         if (&User-Name =~ /\.$/)  { (5)         if (&User-Name =~ /\.$/)   -> FALSE (5)         if (&User-Name =~ /@\./)  { (5)         if (&User-Name =~ /@\./)   -> FALSE (5)       } # if (&User-Name)  = notfound (5)     } # policy filter_username = notfound (5)     [preprocess] = ok (5)     [chap] = noop (5)     [mschap] = noop (5)     [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (5) suffix: No such realm "NULL" (5)     [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 6 length 6 (5) eap: Continuing tunnel setup (5)     [eap] = ok (5)   } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5)   authenticate { (5) eap: Expiring EAP session with state 0x902f42bb94295b96 (5) eap: Finished EAP session with state 0x902f42bb94295b96 (5) eap: Previous EAP request found for state 0x902f42bb94295b96, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: (TLS) Peer ACKed our handshake fragment.  handshake is finished (5) eap_peap: Session established.  Decoding tunneled attributes (5) eap_peap: PEAP state TUNNEL ESTABLISHED (5) eap: Sending EAP Request (code 1) ID 7 length 40 (5) eap: EAP session adding &reply:State = 0x902f42bb95285b96 (5)     [eap] = handled (5)   } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5)   Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5)   Framed-MTU = 994 (5)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (5)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (5)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (5)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (5)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5)   TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 113 from 192.168.183.8:1812 to 192.168.176.5:32790 length 98 (5)   EAP-Message = 0x010700281900170303001da9bbdc6cd36d3d336259b6beac4a5ed29ab7778ed390106d78efe4d750 (5)   Message-Authenticator = 0x00000000000000000000000000000000 (5)   State = 0x902f42bb95285b96ae439ed8c346540f (5) Finished request Waking up in 4.0 seconds. (6) Received Access-Request Id 114 from 192.168.176.5:32790 to 192.168.183.8:1812 length 219 (6)   User-Name = "dbloch3" (6)   NAS-IP-Address = 192.168.176.5 (6)   NAS-Identifier = "hello" (6)   NAS-Port = 0 (6)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (6)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (6)   Framed-MTU = 1400 (6)   NAS-Port-Type = Wireless-802.11 (6)   Connect-Info = "CONNECT 0Mbps 802.11b" (6)   EAP-Message = 0x0207002b1900170303002000000000000000019bd749baa9d1a95aa0e9ad07337a07a8e0f2cb6e200e1d1e (6)   State = 0x902f42bb95285b96ae439ed8c346540f (6)   Message-Authenticator = 0xc7f3e4ccc55a0b7e00014657eed35781 (6) Restoring &session-state (6)   &session-state:Framed-MTU = 994 (6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6)   &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6)   authorize { (6)     policy filter_username { (6)       if (&User-Name) { (6)       if (&User-Name)  -> TRUE (6)       if (&User-Name)  { (6)         if (&User-Name =~ / /) { (6)         if (&User-Name =~ / /)  -> FALSE (6)         if (&User-Name =~ /@[^@]*@/ ) { (6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (6)         if (&User-Name =~ /\.\./ ) { (6)         if (&User-Name =~ /\.\./ )  -> FALSE (6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (6)         if (&User-Name =~ /\.$/)  { (6)         if (&User-Name =~ /\.$/)   -> FALSE (6)         if (&User-Name =~ /@\./)  { (6)         if (&User-Name =~ /@\./)   -> FALSE (6)       } # if (&User-Name)  = notfound (6)     } # policy filter_username = notfound (6)     [preprocess] = ok (6)     [chap] = noop (6)     [mschap] = noop (6)     [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (6) suffix: No such realm "NULL" (6)     [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 43 (6) eap: Continuing tunnel setup (6)     [eap] = ok (6)   } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6)   authenticate { (6) eap: Expiring EAP session with state 0x902f42bb95285b96 (6) eap: Finished EAP session with state 0x902f42bb95285b96 (6) eap: Previous EAP request found for state 0x902f42bb95285b96, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: (TLS) EAP Done initial handshake (6) eap_peap: Session established.  Decoding tunneled attributes (6) eap_peap: PEAP state WAITING FOR INNER IDENTITY (6) eap_peap: Identity - dbloch3 (6) eap_peap: Got inner identity 'dbloch3' (6) eap_peap: Setting default EAP type for tunneled EAP session (6) eap_peap: Got tunneled request (6) eap_peap:   EAP-Message = 0x0207000c0164626c6f636833 (6) eap_peap: Setting User-Name to dbloch3 (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap:   EAP-Message = 0x0207000c0164626c6f636833 (6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap:   User-Name = "dbloch3" (6) Virtual server inner-tunnel received request (6)   EAP-Message = 0x0207000c0164626c6f636833 (6)   FreeRADIUS-Proxied-To = 127.0.0.1 (6)   User-Name = "dbloch3" (6) WARNING: Outer and inner identities are the same.  User privacy is compromised. (6) server inner-tunnel { (6)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6)     authorize { (6)       policy filter_username { (6)         if (&User-Name) { (6)         if (&User-Name)  -> TRUE (6)         if (&User-Name)  { (6)           if (&User-Name =~ / /) { (6)           if (&User-Name =~ / /)  -> FALSE (6)           if (&User-Name =~ /@[^@]*@/ ) { (6)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE (6)           if (&User-Name =~ /\.\./ ) { (6)           if (&User-Name =~ /\.\./ )  -> FALSE (6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (6)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (6)           if (&User-Name =~ /\.$/)  { (6)           if (&User-Name =~ /\.$/)   -> FALSE (6)           if (&User-Name =~ /@\./)  { (6)           if (&User-Name =~ /@\./)   -> FALSE (6)         } # if (&User-Name)  = notfound (6)       } # policy filter_username = notfound (6)       [chap] = noop (6)       [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (6) suffix: No such realm "NULL" (6)       [suffix] = noop (6)       update control { (6)         &Proxy-To-Realm := LOCAL (6)       } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 7 length 12 (6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (6)       [eap] = ok (6)     } # authorize = ok (6)   Found Auth-Type = eap (6)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (6)     authenticate { (6) eap: Peer sent packet with method EAP Identity (1) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: Issuing Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 42 (6) eap: EAP session adding &reply:State = 0x90d0904890d88a80 (6)       [eap] = handled (6)     } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6)   EAP-Message = 0x0108002a1a01080025102fe7b624d83d85a542220de546910283667265657261646975732d332e322e31 (6)   Message-Authenticator = 0x00000000000000000000000000000000 (6)   State = 0x90d0904890d88a8096b00a40119aa09b (6) eap_peap: Got tunneled reply code 11 (6) eap_peap:   EAP-Message = 0x0108002a1a01080025102fe7b624d83d85a542220de546910283667265657261646975732d332e322e31 (6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap:   State = 0x90d0904890d88a8096b00a40119aa09b (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap:   EAP-Message = 0x0108002a1a01080025102fe7b624d83d85a542220de546910283667265657261646975732d332e322e31 (6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap:   State = 0x90d0904890d88a8096b00a40119aa09b (6) eap_peap: Got tunneled Access-Challenge (6) eap: Sending EAP Request (code 1) ID 8 length 73 (6) eap: EAP session adding &reply:State = 0x902f42bb96275b96 (6)     [eap] = handled (6)   } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6)   Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6)   Framed-MTU = 994 (6)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (6)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (6)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (6)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (6)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6)   TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 114 from 192.168.183.8:1812 to 192.168.176.5:32790 length 131 (6)   EAP-Message = 0x010800491900170303003ea9bbdc6cd36d3d34fcc3db8cea4325f743f5154fe928be49ea6171cdcf7e889a16410b23a1e76f00548c4def37ac909ab4cbbb900e58001bb0f752907697 (6)   Message-Authenticator = 0x00000000000000000000000000000000 (6)   State = 0x902f42bb96275b96ae439ed8c346540f (6) Finished request Waking up in 4.0 seconds. (7) Received Access-Request Id 115 from 192.168.176.5:32790 to 192.168.183.8:1812 length 273 (7)   User-Name = "dbloch3" (7)   NAS-IP-Address = 192.168.176.5 (7)   NAS-Identifier = "hello" (7)   NAS-Port = 0 (7)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (7)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (7)   Framed-MTU = 1400 (7)   NAS-Port-Type = Wireless-802.11 (7)   Connect-Info = "CONNECT 0Mbps 802.11b" (7)   EAP-Message = 0x02080061190017030300560000000000000002df3dc96387a64877d27aefd87b870b139cc7eb4eff838df797931d746bfa4faacb1f0be4237e40c72a4d7a0e054da3760908338169c32d8fe2c9f20a7280cc3e23538ae04af21dbce766deac9557 (7)   State = 0x902f42bb96275b96ae439ed8c346540f (7)   Message-Authenticator = 0x5e0249abb1f5c83212e741f35bc92a66 (7) Restoring &session-state (7)   &session-state:Framed-MTU = 994 (7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7)   &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7)   authorize { (7)     policy filter_username { (7)       if (&User-Name) { (7)       if (&User-Name)  -> TRUE (7)       if (&User-Name)  { (7)         if (&User-Name =~ / /) { (7)         if (&User-Name =~ / /)  -> FALSE (7)         if (&User-Name =~ /@[^@]*@/ ) { (7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (7)         if (&User-Name =~ /\.\./ ) { (7)         if (&User-Name =~ /\.\./ )  -> FALSE (7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (7)         if (&User-Name =~ /\.$/)  { (7)         if (&User-Name =~ /\.$/)   -> FALSE (7)         if (&User-Name =~ /@\./)  { (7)         if (&User-Name =~ /@\./)   -> FALSE (7)       } # if (&User-Name)  = notfound (7)     } # policy filter_username = notfound (7)     [preprocess] = ok (7)     [chap] = noop (7)     [mschap] = noop (7)     [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (7) suffix: No such realm "NULL" (7)     [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 97 (7) eap: Continuing tunnel setup (7)     [eap] = ok (7)   } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7)   authenticate { (7) eap: Expiring EAP session with state 0x90d0904890d88a80 (7) eap: Finished EAP session with state 0x902f42bb96275b96 (7) eap: Previous EAP request found for state 0x902f42bb96275b96, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: (TLS) EAP Done initial handshake (7) eap_peap: Session established.  Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap:   EAP-Message = 0x020800421a0208003d31e25fe1a18ed2e1badd11b51f6342b8cc000000000000000007a49c0565f4376624d86213c14b8445240d90a5ffd7ab780064626c6f636833 (7) eap_peap: Setting User-Name to dbloch3 (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap:   EAP-Message = 0x020800421a0208003d31e25fe1a18ed2e1badd11b51f6342b8cc000000000000000007a49c0565f4376624d86213c14b8445240d90a5ffd7ab780064626c6f636833 (7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap:   User-Name = "dbloch3" (7) eap_peap:   State = 0x90d0904890d88a8096b00a40119aa09b (7) Virtual server inner-tunnel received request (7)   EAP-Message = 0x020800421a0208003d31e25fe1a18ed2e1badd11b51f6342b8cc000000000000000007a49c0565f4376624d86213c14b8445240d90a5ffd7ab780064626c6f636833 (7)   FreeRADIUS-Proxied-To = 127.0.0.1 (7)   User-Name = "dbloch3" (7)   State = 0x90d0904890d88a8096b00a40119aa09b (7) WARNING: Outer and inner identities are the same.  User privacy is compromised. (7) server inner-tunnel { (7)   session-state: No cached attributes (7)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7)     authorize { (7)       policy filter_username { (7)         if (&User-Name) { (7)         if (&User-Name)  -> TRUE (7)         if (&User-Name)  { (7)           if (&User-Name =~ / /) { (7)           if (&User-Name =~ / /)  -> FALSE (7)           if (&User-Name =~ /@[^@]*@/ ) { (7)           if (&User-Name =~ /@[^@]*@/ )  -> FALSE (7)           if (&User-Name =~ /\.\./ ) { (7)           if (&User-Name =~ /\.\./ )  -> FALSE (7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (7)           if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (7)           if (&User-Name =~ /\.$/)  { (7)           if (&User-Name =~ /\.$/)   -> FALSE (7)           if (&User-Name =~ /@\./)  { (7)           if (&User-Name =~ /@\./)   -> FALSE (7)         } # if (&User-Name)  = notfound (7)       } # policy filter_username = notfound (7)       [chap] = noop (7)       [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (7) suffix: No such realm "NULL" (7)       [suffix] = noop (7)       update control { (7)         &Proxy-To-Realm := LOCAL (7)       } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 8 length 66 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7)       [eap] = updated (7)       [files] = noop (7) sql: EXPAND %{User-Name} (7) sql:    --> dbloch3 (7) sql: SQL-User-Name set to 'dbloch3' rlm_sql (sql): Reserved connection (2) (7) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (7) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'dbloch3' ORDER BY id (7) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'dbloch3' ORDER BY id (7) sql: WARNING: User not found in radcheck table. (7) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (7) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'dbloch3' ORDER BY priority (7) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'dbloch3' ORDER BY priority (7) sql: User not found in any groups rlm_sql (sql): Released connection (2) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 (7)       [sql] = notfound rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap:    --> (uid=dbloch3) (7) ldap: Performing search in "ou=People,o=Telbridge" with filter "(uid=dbloch3)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "uid=dbloch3,ou=People,o=Telbridge" (7) ldap: Processing user attributes (7) ldap: control:Password-With-Header += '{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF' (7) ldap: control:Cleartext-Password += '{SSHA}mrGmyTnxVsEdQ5eOtNfMghb4eqCV8pDF' rlm_ldap (ldap): Released connection (1) Need more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://ldap.telbridge:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (7)       [ldap] = updated (7)       [expiration] = noop (7)       [logintime] = noop (7) pap: WARNING: Config already contains a "known good" password (&control:Cleartext-Password).  Ignoring &control:Password-With-Header (7) pap: WARNING: Auth-Type already set.  Not setting to PAP (7)       [pap] = noop (7)     } # authorize = updated (7)   Found Auth-Type = eap (7)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7)     authenticate { (7) eap: Expiring EAP session with state 0x90d0904890d88a80 (7) eap: Finished EAP session with state 0x90d0904890d88a80 (7) eap: Previous EAP request found for state 0x90d0904890d88a80, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7) eap_mschapv2:   authenticate { (7) mschap: Found Cleartext-Password, hashing to create NT-Password (7) mschap: Creating challenge hash with username: dbloch3 (7) mschap: Client is using MS-CHAPv2 (7) mschap: Executing: /usr/bin/ntlm_auth --request-nt-key --allow-mschapv2 --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}: (7) mschap: EXPAND --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} (7) mschap:    --> --username=dbloch3 (7) mschap: Creating challenge hash with username: dbloch3 (7) mschap: EXPAND --challenge=%{%{mschap:Challenge}:-00} (7) mschap:    --> --challenge=9acea959342abf86 (7) mschap: EXPAND --nt-response=%{%{mschap:NT-Response}:-00} (7) mschap:    --> --nt-response=07a49c0565f4376624d86213c14b8445240d90a5ffd7ab78 (7) mschap: ERROR: Program returned code (1) and output 'No logon servers are currently available to service the logon request. (0xc000005e)' (7) mschap: ERROR: No logon servers are currently available to service the logon request. (0xc000005e) (7) mschap: Authentication failed (7) eap_mschapv2:     [mschap] = fail (7) eap_mschapv2:   } # authenticate = fail (7) eap: Sending EAP Failure (code 4) ID 8 length 4 (7) eap: Freeing handler (7)       [eap] = reject (7)     } # authenticate = reject (7)   Failed to authenticate the user (7)   Using Post-Auth-Type Reject (7)   # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (7)     Post-Auth-Type REJECT { (7) sql: EXPAND .query (7) sql:    --> .query (7) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (7) sql: EXPAND %{User-Name} (7) sql:    --> dbloch3 (7) sql: SQL-User-Name set to 'dbloch3' (7) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' ) (7) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05 12:59:46.972526' ) (7) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05 12:59:46.972526' ) (7) sql: SQL query returned: success (7) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) Need more connections to reach 10 spares rlm_sql (sql): Opening additional connection (8), 1 of 24 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'raddb' on Localhost via UNIX socket, server version 10.11.6-MariaDB-0+deb12u1, protocol version 10 (7)       [sql] = ok (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject:    --> dbloch3 (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7)       [attr_filter.access_reject] = updated (7)       update outer.session-state { (7)         &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: Program returned code (1) and output \'No logon servers are currently available to service the logon request. (0xc000005e)\'' (7)       } # update outer.session-state = noop (7)     } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7)   MS-CHAP-Error = "\010E=691 R=1 C=ad0886c2aa7ae0b9c01ac20e3d4a8de4 V=3 M=Authentication failed" (7)   EAP-Message = 0x04080004 (7)   Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply code 3 (7) eap_peap:   MS-CHAP-Error = "\010E=691 R=1 C=ad0886c2aa7ae0b9c01ac20e3d4a8de4 V=3 M=Authentication failed" (7) eap_peap:   EAP-Message = 0x04080004 (7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap:   MS-CHAP-Error = "\010E=691 R=1 C=ad0886c2aa7ae0b9c01ac20e3d4a8de4 V=3 M=Authentication failed" (7) eap_peap:   EAP-Message = 0x04080004 (7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 9 length 46 (7) eap: EAP session adding &reply:State = 0x902f42bb97265b96 (7)     [eap] = handled (7)   } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7)   Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7)   Framed-MTU = 994 (7)   TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (7)   TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (7)   TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (7)   TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7)   TLS-Session-Version = "TLS 1.2" (7)   Module-Failure-Message := "mschap: Program returned code (1) and output 'No logon servers are currently available to service the logon request. (0xc000005e)'" (7) Sent Access-Challenge Id 115 from 192.168.183.8:1812 to 192.168.176.5:32790 length 104 (7)   EAP-Message = 0x0109002e19001703030023a9bbdc6cd36d3d3547892ba6ba00ab307a687f2a578ded6ead5b8d3d9cfc75e6da45cf (7)   Message-Authenticator = 0x00000000000000000000000000000000 (7)   State = 0x902f42bb97265b96ae439ed8c346540f (7) Finished request Waking up in 3.9 seconds. (8) Received Access-Request Id 116 from 192.168.176.5:32790 to 192.168.183.8:1812 length 222 (8)   User-Name = "dbloch3" (8)   NAS-IP-Address = 192.168.176.5 (8)   NAS-Identifier = "hello" (8)   NAS-Port = 0 (8)   Called-Station-Id = "10-0D-7F-45-16-A0:NETGEAR_TLB_TEST" (8)   Calling-Station-Id = "A4-C3-F0-D6-EC-46" (8)   Framed-MTU = 1400 (8)   NAS-Port-Type = Wireless-802.11 (8)   Connect-Info = "CONNECT 0Mbps 802.11b" (8)   EAP-Message = 0x0209002e190017030300230000000000000003a6efe366d01f3b89b17e89bd91dc68add17db12c9d734d7480b2c1 (8)   State = 0x902f42bb97265b96ae439ed8c346540f (8)   Message-Authenticator = 0xf386d3783d4244e7bd3fc102e55189ee (8) Restoring &session-state (8)   &session-state:Framed-MTU = 994 (8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.3 Handshake, ClientHello" (8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHello" (8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Certificate" (8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerKeyExchange" (8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, ServerHelloDone" (8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, ClientKeyExchange" (8)   &session-state:TLS-Session-Information = "(TLS) recv TLS 1.2 Handshake, Finished" (8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 ChangeCipherSpec" (8)   &session-state:TLS-Session-Information = "(TLS) send TLS 1.2 Handshake, Finished" (8)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8)   &session-state:TLS-Session-Version = "TLS 1.2" (8)   &session-state:Module-Failure-Message := "mschap: Program returned code (1) and output 'No logon servers are currently available to service the logon request. (0xc000005e)'" (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8)   authorize { (8)     policy filter_username { (8)       if (&User-Name) { (8)       if (&User-Name)  -> TRUE (8)       if (&User-Name)  { (8)         if (&User-Name =~ / /) { (8)         if (&User-Name =~ / /)  -> FALSE (8)         if (&User-Name =~ /@[^@]*@/ ) { (8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE (8)         if (&User-Name =~ /\.\./ ) { (8)         if (&User-Name =~ /\.\./ )  -> FALSE (8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  { (8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE (8)         if (&User-Name =~ /\.$/)  { (8)         if (&User-Name =~ /\.$/)   -> FALSE (8)         if (&User-Name =~ /@\./)  { (8)         if (&User-Name =~ /@\./)   -> FALSE (8)       } # if (&User-Name)  = notfound (8)     } # policy filter_username = notfound (8)     [preprocess] = ok (8)     [chap] = noop (8)     [mschap] = noop (8)     [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "dbloch3", looking up realm NULL (8) suffix: No such realm "NULL" (8)     [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 9 length 46 (8) eap: Continuing tunnel setup (8)     [eap] = ok (8)   } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8)   authenticate { (8) eap: Expiring EAP session with state 0x902f42bb97265b96 (8) eap: Finished EAP session with state 0x902f42bb97265b96 (8) eap: Previous EAP request found for state 0x902f42bb97265b96, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: (TLS) EAP Done initial handshake (8) eap_peap: Session established.  Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap:   ERROR: The users session was previously rejected: returning reject (again.) (8) eap_peap:   This means you need to read the PREVIOUS messages in the debug output (8) eap_peap:   to find out the reason why the user was rejected (8) eap_peap:   Look for "reject" or "fail".  Those earlier messages will tell you (8) eap_peap:   what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 9 length 4 (8) eap: Failed in EAP select (8)     [eap] = invalid (8)   } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8)   Post-Auth-Type REJECT { (8) sql: EXPAND .query (8) sql:    --> .query (8) sql: Using query template 'query' rlm_sql (sql): Reserved connection (4) (8) sql: EXPAND %{User-Name} (8) sql:    --> dbloch3 (8) sql: SQL-User-Name set to 'dbloch3' (8) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M' ) (8) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05 12:59:47.050856' ) (8) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate ) VALUES ( 'dbloch3', '', 'Access-Reject', '2025-03-05 12:59:47.050856' ) (8) sql: SQL query returned: success (8) sql: 1 record(s) updated rlm_sql (sql): Released connection (4) (8)     [sql] = ok (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject:    --> dbloch3 (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8)     [attr_filter.access_reject] = updated (8)     [eap] = noop (8)     policy remove_reply_message_if_eap { (8)       if (&reply:EAP-Message && &reply:Reply-Message) { (8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE (8)       else { (8)         [noop] = noop (8)       } # else = noop (8)     } # policy remove_reply_message_if_eap = noop (8)   } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) (8) Discarding duplicate request from client AP_pow3 port 32790 - ID: 116 due to delayed response (8) Sending delayed response (8) Sent Access-Reject Id 116 from 192.168.183.8:1812 to 192.168.176.5:32790 length 44 (8)   EAP-Message = 0x04090004 (8)   Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 2.9 seconds. (0) Cleaning up request packet ID 108 with timestamp +15 due to cleanup_delay was reached (1) Cleaning up request packet ID 109 with timestamp +15 due to cleanup_delay was reached (2) Cleaning up request packet ID 110 with timestamp +16 due to cleanup_delay was reached (3) Cleaning up request packet ID 111 with timestamp +16 due to cleanup_delay was reached (4) Cleaning up request packet ID 112 with timestamp +16 due to cleanup_delay was reached Waking up in 0.8 seconds. (5) Cleaning up request packet ID 113 with timestamp +16 due to cleanup_delay was reached (6) Cleaning up request packet ID 114 with timestamp +16 due to cleanup_delay was reached (7) Cleaning up request packet ID 115 with timestamp +16 due to cleanup_delay was reached (8) Cleaning up request packet ID 116 with timestamp +17 due to cleanup_delay was reached Ready to process requests -- Z poważaniem, *Dariusz Bloch* Specjalista ds. IT tel. +48 22 420 57 56 kom. +48 665 678 605 dariusz.bloch@telbridge.pl www.telbridge.pl <http://www.telbridge.pl> <http://www.telbridge.pl> <http://www.telbridge.pl> <http://www.telbridge.pl> Telbridge sp. z o.o. sp. k. ul. Zagnańska 49, 25-528 Kielce, NIP: 959-153-09-86. Sąd Rejonowy w Kielcach, X Wydział Gospodarczy KRS, KRS 0000788347, Oddział w Toruniu, ul. Gdańska 4a, II p. 87-100 Toruń, tel. +48 22 420 56 60, tel./fax +48 22 420 56 55