use like follows *Acct-Interim-Interval := 60* if you use Database you should insert this data to *radraply *table On Thu, Feb 16, 2012 at 12:59 PM, oportino [via FreeRadius] < ml-node+s1045715n5488744h83@n5.nabble.com> wrote:

Hello all,

I am using freeradius 2.1.0 on Ubuntu 10.10 and using rp-pppoe server and chillispot server for user login authentication method on same machine and set up radius attribute for end user such as #-------------------------------------------------------------------------------------

*radtest abc abc123 127.0.0.1 0 SecretKey* Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "abc" User-Password = "abc123" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, length=80 Idle-Timeout = 600 WISPr-Bandwidth-Max-Down = 100000000 WISPr-Bandwidth-Max-Up = 100000000 *Acct-Interim-Interval = 60* Acct-Status-Type = Interim-Update *Session-Timeout = 300*

( All user can login all of session is 5mins ) #-------------------------------------------------------------------------------------

1.After first use logged in ( with pppoe or chillispot) the user "abc" use the network times 200secs (left time=100secs) and logged off later.

2.The user "abc" logged in again with radius message User-Name = "abc" User-Password = "abc123" NAS-IP-Address = 127.0.1.1 NAS-Port = 0 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, length=80 Idle-Timeout = 600 WISPr-Bandwidth-Max-Down = 100000000 WISPr-Bandwidth-Max-Up = 100000000 *Acct-Interim-Interval = 60* Acct-Status-Type = Interim-Update *Session-Timeout = 100*

During live logged in session , In the radius database and radacct table has 2 record insert (first record is first login and *secondary record is now login*)

I delete the first database record (use time= 200secs) so that the attribute Acct-Interim-Interval it is updating all sessiontime count to 0 and "abc" can use the network 300secs. But it is not updating session and the user "abc" was terminate after 100 secs normally by AcctTerminateCause is "Session-Timeout" .

What does debug or how?

Thanking for every thing.

------------------------------ If you reply to this email, your message will be added to the discussion below:

http://freeradius.1045715.n5.nabble.com/Acct-Interim-Interval-session-time-n... To unsubscribe from FreeRadius, click here<http://freeradius.1045715.n5.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=2740692&code=YWNoaW50aGF1QGdtYWlsLmNvbXwyNzQwNjkyfC0xNDExMDc0NTA0> . NAML<http://freeradius.1045715.n5.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>

-- Best Regards.. Achintha Udukumbura -- View this message in context: http://freeradius.1045715.n5.nabble.com/Acct-Interim-Interval-session-time-n... Sent from the FreeRadius - User mailing list archive at Nabble.com.