AW: User Problem with Cisco Nexus 4.x
Hi, I found the problem on my own. Cisco Nexus with NXOS Version older than 4.2 (4.0 and 4.1) don´t like the entry "Vendor-Specific = 9". It seems that freeradius add this automatically if it´s not within the config. But, when i put it in the config, the dump shows "bad udp checksum", wireshark "AVP too long". When i remove this line from the config, "vendor-specific=9" is also transmitted, but without checksum/avp too long error. Is this behavior documented anywhere? I didn´t found this. Jan
Jan.Gnepper@t-systems.com wrote:
Cisco Nexus with NXOS Version older than 4.2 (4.0 and 4.1) don´t like the entry "Vendor-Specific = 9".
What does that mean?
It seems that freeradius add this automatically if it´s not within the config.
No. FreeRADIUS adds almost nothing automatically.
But, when i put it in the config, the dump shows "bad udp checksum", wireshark "AVP too long". When i remove this line from the config, "vendor-specific=9" is also transmitted, but without checksum/avp too long error.
Is this behavior documented anywhere? I didn´t found this.
See the FAQ for "it doesn't work". You haven't shown us the wireshark output. You haven't shown us the configuration you added. Short summaries are *not* enough. We need the *exact* information. Alan DeKok.
participants (2)
-
Alan DeKok -
Jan.Gnepper＠t-systems.com