Hi Alan and many thanks for the fast reply.. this is the report of radiusd -x command... _________________________________________________________________ rad_recv: Access-Request packet from host 10.10.0.30:1144, id=37, length=130 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1116 NAS-Port-Type = Ethernet User-Name = "test" Calling-Station-Id = "00:15:D6:02:03:54" Called-Station-Id = "PPPoE" NAS-Port-Id = "wlan2" User-Password = "pqyqalxb" NAS-Identifier = "nas1" NAS-IP-Address = 10.10.0.30 rlm_sql (sql): Reserving sql socket id: 4 rlm_sql (sql): Released sql socket id: 4 rlm_sql (sql): Processing sql_postauth rlm_sql (sql): Reserving sql socket id: 3 rlm_sql (sql): Released sql socket id: 3 Sending Access-Accept of id 37 to 10.10.0.30 port 1144 Framed-Routing = Broadcast-Listen Framed-Pool = "pppoe-pool1" Framed-IP-Netmask = 255.255.255.0 rad_recv: Accounting-Request packet from host 10.10.0.30:1144, id=38, length=146 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1116 NAS-Port-Type = Ethernet User-Name = "test" Calling-Station-Id = "00:15:D6:02:03:54" Called-Station-Id = "PPPoE" NAS-Port-Id = "wlan2" Acct-Session-Id = "81100016" Framed-IP-Address = 10.0.0.220 Acct-Authentic = RADIUS Acct-Status-Type = Start NAS-Identifier = "nas1" NAS-IP-Address = 10.10.0.30 Acct-Delay-Time = 0 rlm_sql (sql): Reserving sql socket id: 2 rlm_sql (sql): Released sql socket id: 2 Sending Accounting-Response of id 38 to 10.10.0.30 port 1144 rad_recv: Accounting-Request packet from host 10.10.0.30:1144, id=39, length=194 Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 1116 NAS-Port-Type = Ethernet User-Name = "testt" Calling-Station-Id = "00:15:D6:02:03:54" Called-Station-Id = "PPPoE" NAS-Port-Id = "wlan2" Acct-Session-Id = "81100016" Framed-IP-Address = 10.0.0.220 Acct-Authentic = RADIUS Acct-Session-Time = 0 Acct-Input-Octets = 72 Acct-Input-Gigawords = 0 Acct-Input-Packets = 6 Acct-Output-Octets = 54 Acct-Output-Gigawords = 0 Acct-Output-Packets = 6 Acct-Status-Type = Stop Acct-Terminate-Cause = NAS-Error NAS-Identifier = "nas1" NAS-IP-Address = 10.10.0.30 Acct-Delay-Time = 0 rlm_sql (sql): Reserving sql socket id: 1 rlm_sql (sql): Released sql socket id: 1 Sending Accounting-Response of id 39 to 10.10.0.30 port 1144 _______________________________________________________ at this point, in the Mikrotik log I see --> terminating... - could not determine local IP address Thanks in advance... ----- Original Message ----- From: Alan DeKok To: FreeRadius users mailing list Sent: Wednesday, May 24, 2006 6:31 PM Subject: Re: could not determine local IP address "Italo Morellato" <italo@witel.it> wrote:

my freeradius work fine with HotSpot but when I check ppp I've one error. Freeradius 1.1.1 Log is paste below...

No, it's a PPP log. It looks like your PPP is broken. Ask on a PPP list how to fix it. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html