Windows cannot authenticate with Freeradius

31 Aug 2017

      Hi

My Windows clients (Win 7 and Win 10) cannot authenticate with Freeradius
due to this error:

routines:ssl3_read_bytes:tlsv1 alert unknown ca

I have searched a bit around and seems to be a problem with the CA
certification of the server. Is that correct?

As far as I remember last year it was working, but now that I restarted the
project and am planning to finalise it, we are getting this error. Maybe
something happened in Windows environment - for example some update?

NB: Window clients are NOT Domain clients.

The APs are Unifi.

Android and iPhone clients connect without any problems.

Testing using radtest works fine too, as you can see in the log

I haven't touched Freeradius these past 12 months and I forgot what I did,
so please try to be verbose with your answers - thanks beforehand for the
patience and support.

The lines marked red in the debug are the below:

(21) eap_peap: Continuing EAP-TLS
(21) eap_peap: Peer indicated complete TLS record size will be 7 bytes
(21) eap_peap: Got complete TLS record (7 bytes)
(21) eap_peap: [eaptls verify] = length included
(21) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca
(21) eap_peap: ERROR: TLS Alert read:fatal:unknown CA
(21) eap_peap: ERROR: TLS_accept: Failed in unknown state
(21) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read)
(21) eap_peap: ERROR: error:14094418:SSL routines:ssl3_read_bytes:tlsv1
alert unknown ca
(21) eap_peap: ERROR: error:140940E5:SSL routines:ssl3_read_bytes:ssl
handshake failure
(21) eap_peap: ERROR: System call (I/O) error (-1)
(21) eap_peap: ERROR: TLS receive handshake failed during operation
(21) eap_peap: ERROR: [eaptls process] = fail
(21) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module
failed
(21) eap: Sending EAP Failure (code 4) ID 216 length 4

The full log is here:

(WARNING 1700 lines)

radius@radius:~$ freeradius -X
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
Unable to open file "/etc/freeradius/radiusd.conf": Permission denied
Errors reading or parsing /etc/freeradius/radiusd.conf
radius@radius:~$ sudo freeradius -X
FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/adldap
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/date
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/ldap
including configuration file /etc/freeradius/mods-enabled/digest
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/replicate
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/control
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/accounting
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/operator-name
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
main {
 security {
        user = "freerad"
        group = "freerad"
        allow_core_dumps = no
 }
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
}
main {
        name = "freeradius"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/freeradius"
        run_dir = "/var/run/freeradius"
        libdir = "/usr/lib/freeradius"
        radacctdir = "/var/log/freeradius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/freeradius/freeradius.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client 192.168.100.1/24 {
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "NAS"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client
192.168.100.1/24. Please fix your configuration
Support for old-style clients will be removed in a future release
Debugger not attached
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
 # Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_ldap
  # Loading module "adldap" from file /etc/freeradius/mods-enabled/adldap
  ldap adldap {
        server = "localhost"
        identity = "cn=admin,dc=seminary,dc=local"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "ou=School,dc=seminary,dc=ad"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute adldap-LDAP-Group
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
  eap {
        default_eap_type = "ttls"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/freeradius/mods-enabled/dynamic_clients
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_exec
  # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
  # Loaded module rlm_date
  # Loading module "date" from file /etc/freeradius/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
  unix {
        radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_detail
  # Loading module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail auth_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail reply_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "ntlm_auth" from file
/etc/freeradius/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap
  ldap {
        server = "localhost"
        identity = "cn=admin,dc=seminary,dc=local"
        password = <<< secret >>>
   sasl {
   }
   user {
        scope = "sub"
        access_positive = yes
    sasl {
    }
   }
   group {
        filter = "(objectClass=posixGroup)"
        scope = "sub"
        name_attribute = "cn"
        membership_attribute = "memberOf"
        cacheable_name = no
        cacheable_dn = no
   }
   client {
        filter = "(objectClass=radiusClient)"
        scope = "sub"
        base_dn = "ou=SeminaryOU,dc=seminary,dc=local"
   }
   profile {
   }
   options {
        ldap_debug = 40
        chase_referrals = yes
        rebind = yes
        net_timeout = 1
        res_timeout = 10
        srv_timelimit = 3
        idle = 60
        probes = 3
        interval = 3
   }
   tls {
        start_tls = no
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/mods-enabled/files
  files {
        filename = "/etc/freeradius/mods-config/files/authorize"
        acctusersfile = "/etc/freeradius/mods-config/files/accounting"
        preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
        hints = "/etc/freeradius/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
  detail {
        filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file
/etc/freeradius/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/freeradius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/freeradius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
  linelog {
        filename = "/var/log/freeradius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/freeradius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/etc/freeradius/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/etc/freeradius/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/freeradius/mods-enabled/replicate
  instantiate {
  }
  # Instantiating module "mschap" from file
/etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "adldap" from file
/etc/freeradius/mods-enabled/adldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20442
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (adldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (adldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
  # Instantiating module "reject" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "fail" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
  # Instantiating module "handled" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "noop" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "updated" from file
/etc/freeradius/mods-enabled/always
  # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/freeradius/certs"
        pem_file_type = yes
        private_key_file = "/etc/freeradius/certs/server.pem"
        certificate_file = "/etc/freeradius/certs/server.pem"
        ca_file = "/etc/freeradius/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/etc/freeradius/certs/dh"
        random_file = "/dev/urandom"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        ecdh_curve = "prime256v1"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = yes
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "logintime" from file
/etc/freeradius/mods-enabled/logintime
  # Instantiating module "IPASS" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/freeradius/mods-enabled/realm
  # Instantiating module "auth_log" from file
/etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/freeradius/mods-enabled/detail.log
  # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
  # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
        reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "files" from file
/etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
  # Instantiating module "preprocess" from file
/etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file
/etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
  # Instantiating module "detail" from file
/etc/freeradius/mods-enabled/detail
  # Instantiating module "expiration" from file
/etc/freeradius/mods-enabled/expiration
  # Instantiating module "etc_passwd" from file
/etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "linelog" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/freeradius/mods-enabled/linelog
  # Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"       found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"  found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/mods-config/attr_filter/accounting_response
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 37407
Listening on proxy address :: port 50037
Ready to process requests

#

(0) Received Access-Request Id 123 from 192.168.100.114:56557 to
192.168.100.201:1812 length 173
(0)   User-Name = "pmatthew28"
(0)   NAS-Identifier = "802aa849cbcc"
(0)   NAS-Port = 0
(0)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(0)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Connect-Info = "CONNECT 0Mbps 802.11b"
(0)   EAP-Message = 0x02ec000f01706d6174746865773238
(0)   Message-Authenticator = 0x935cdf979e338f0c23f870035d1b1efd
(0) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 236 length 15
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_ttls to process data
(0) eap_ttls: Initiating new EAP-TLS session
(0) eap_ttls: Flushing SSL sessions (of #0)
(0) eap_ttls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 237 length 6
(0) eap: EAP session adding &reply:State = 0x267c1fc626910a3a
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) Post-Auth-Type sub-section not found.  Ignoring.
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Sent Access-Challenge Id 123 from 192.168.100.201:1812 to
192.168.100.114:56557 length 0
(0)   EAP-Message = 0x01ed00061520
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x267c1fc626910a3a34f2d43cba74c1f8
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 124 from 192.168.100.114:56557 to
192.168.100.201:1812 length 182
(1)   User-Name = "pmatthew28"
(1)   NAS-Identifier = "802aa849cbcc"
(1)   NAS-Port = 0
(1)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(1)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Connect-Info = "CONNECT 0Mbps 802.11b"
(1)   EAP-Message = 0x02ed00060319
(1)   State = 0x267c1fc626910a3a34f2d43cba74c1f8
(1)   Message-Authenticator = 0x2e5395829bafc4df41523bf2696fb810
(1) session-state: No cached attributes
(1) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 237 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
rlm_ldap (ldap): Closing connection (0): Hit idle_timeout, was idle for 72
seconds
rlm_ldap (ldap): Closing connection (1): Hit idle_timeout, was idle for 72
seconds
rlm_ldap (ldap): Closing connection (2): Hit idle_timeout, was idle for 72
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (3): Hit idle_timeout, was idle for 72
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): Closing connection (4): Hit idle_timeout, was idle for 72
seconds
rlm_ldap (ldap): You probably need to lower "min"
rlm_ldap (ldap): 0 of 0 connections in use.  You  may need to increase
"spare"
rlm_ldap (ldap): Opening additional connection (5), 1 of 32 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Reserved connection (5)
(1) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap:    --> (cn=pmatthew28)
(1) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
filter "(cn=pmatthew28)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header +=
'{SSHA}MJQyy9ahOjIexdTm6qaygw/ne5qDGF07'
rlm_ldap (ldap): Released connection (5)
Need 2 more connections to reach min connections (3)
rlm_ldap (ldap): Opening additional connection (6), 1 of 31 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1)     [ldap] = updated
rlm_ldap (adldap): Closing connection (0): Hit idle_timeout, was idle for
72 seconds
rlm_ldap (adldap): Closing connection (1): Hit idle_timeout, was idle for
72 seconds
rlm_ldap (adldap): Closing connection (2): Hit idle_timeout, was idle for
72 seconds
rlm_ldap (adldap): You probably need to lower "min"
rlm_ldap (adldap): Closing connection (3): Hit idle_timeout, was idle for
72 seconds
rlm_ldap (adldap): You probably need to lower "min"
rlm_ldap (adldap): Closing connection (4): Hit idle_timeout, was idle for
72 seconds
rlm_ldap (adldap): You probably need to lower "min"
rlm_ldap (adldap): 0 of 0 connections in use.  You  may need to increase
"spare"
rlm_ldap (adldap): Opening additional connection (5), 1 of 32 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
rlm_ldap (adldap): Reserved connection (5)
(1) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(1) adldap:    --> (cn=pmatthew28)
(1) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
"(cn=pmatthew28)", scope "sub"
(1) adldap: Waiting for search result...
(1) adldap: The specified DN wasn't found
(1) adldap: Search returned no results
rlm_ldap (adldap): Released connection (5)
Need 2 more connections to reach min connections (3)
rlm_ldap (adldap): Opening additional connection (6), 1 of 31 pending slots
used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
(1)     [adldap] = notfound
(1)     [expiration] = noop
(1)     [logintime] = noop
(1) pap: Converted: &control:Password-With-Header -> &control:SSHA1-Password
(1) pap: Removing &control:Password-With-Header
(1) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24
bytes
(1) pap: WARNING: Auth-Type already set.  Not setting to PAP
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x267c1fc626910a3a
(1) eap: Finished EAP session with state 0x267c1fc626910a3a
(1) eap: Previous EAP request found for state 0x267c1fc626910a3a, released
from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 238 length 6
(1) eap: EAP session adding &reply:State = 0x267c1fc62792063a
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) Post-Auth-Type sub-section not found.  Ignoring.
(1) # Executing group from file /etc/freeradius/sites-enabled/default
(1) Sent Access-Challenge Id 124 from 192.168.100.201:1812 to
192.168.100.114:56557 length 0
(1)   EAP-Message = 0x01ee00061920
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x267c1fc62792063a34f2d43cba74c1f8
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 125 from 192.168.100.114:56557 to
192.168.100.201:1812 length 289
(2)   User-Name = "pmatthew28"
(2)   NAS-Identifier = "802aa849cbcc"
(2)   NAS-Port = 0
(2)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(2)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Connect-Info = "CONNECT 0Mbps 802.11b"
(2)   EAP-Message =
0x02ee007119800000006716030100620100005e030159a852b0c113d1c128d7b866d3c3be37b34dc8855e795b91a72288e8b3f09ebc00001cc014c013003900330035002fc00ac00900380032000a00130005000401000019000a0006000400170018000b0002010000170000ff01000100
(2)   State = 0x267c1fc62792063a34f2d43cba74c1f8
(2)   Message-Authenticator = 0x4933ab887ba70d70078755d218643b42
(2) session-state: No cached attributes
(2) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(2) suffix: No such realm "NULL"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 238 length 113
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x267c1fc62792063a
(2) eap: Finished EAP session with state 0x267c1fc62792063a
(2) eap: Previous EAP request found for state 0x267c1fc62792063a, released
from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 103 bytes
(2) eap_peap: Got complete TLS record (103 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.0 Handshake [length 0062], ClientHello
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0059], ServerHello
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0973], Certificate
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: >>> send TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: unknown state
(2) eap_peap: TLS_accept: Need to read more data: unknown state
(2) eap_peap: TLS_accept: Need to read more data: unknown state
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 239 length 1004
(2) eap: EAP session adding &reply:State = 0x267c1fc62493063a
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) Post-Auth-Type sub-section not found.  Ignoring.
(2) # Executing group from file /etc/freeradius/sites-enabled/default
(2) Sent Access-Challenge Id 125 from 192.168.100.201:1812 to
192.168.100.114:56557 length 0
(2)   EAP-Message =
0x01ef03ec19c000000b2f1603010059020000550301879dfd797e3be608b98698d42e2e9031f29cb8388662304dbb3b25d6125387ed2029b731a7c8ce9c152b353a6ef6f9000ba9d2037153ea88d81c46e02f28666df2c01400000dff01000100000b00040300010216030109730b00096f00096c000420
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x267c1fc62493063a34f2d43cba74c1f8
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 126 from 192.168.100.114:56557 to
192.168.100.201:1812 length 182
(3)   User-Name = "pmatthew28"
(3)   NAS-Identifier = "802aa849cbcc"
(3)   NAS-Port = 0
(3)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(3)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Connect-Info = "CONNECT 0Mbps 802.11b"
(3)   EAP-Message = 0x02ef00061900
(3)   State = 0x267c1fc62493063a34f2d43cba74c1f8
(3)   Message-Authenticator = 0x600eef4f6dda8d2c8b90ff01479a5c7b
(3) session-state: No cached attributes
(3) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(3) suffix: No such realm "NULL"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 239 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x267c1fc62493063a
(3) eap: Finished EAP session with state 0x267c1fc62493063a
(3) eap: Previous EAP request found for state 0x267c1fc62493063a, released
from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 240 length 1000
(3) eap: EAP session adding &reply:State = 0x267c1fc6258c063a
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) Post-Auth-Type sub-section not found.  Ignoring.
(3) # Executing group from file /etc/freeradius/sites-enabled/default
(3) Sent Access-Challenge Id 126 from 192.168.100.201:1812 to
192.168.100.114:56557 length 0
(3)   EAP-Message =
0x01f003e81940b3d95dd2ed6bc14f8008ac4ccb42e7eb0200a8d70b9a3d9e451cf4e0f645302d933d25af330480c89609c676a8b21f5463d0d83293c3d96e1f52034ec62a147f95d27b9a6f34ab0a97a3b7a366601166a86c0409ece2b9ddc79831d2c39f79903774d273ae6afca66797b43da5bef25a50
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x267c1fc6258c063a34f2d43cba74c1f8
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 127 from 192.168.100.114:56557 to
192.168.100.201:1812 length 182
(4)   User-Name = "pmatthew28"
(4)   NAS-Identifier = "802aa849cbcc"
(4)   NAS-Port = 0
(4)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(4)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Connect-Info = "CONNECT 0Mbps 802.11b"
(4)   EAP-Message = 0x02f000061900
(4)   State = 0x267c1fc6258c063a34f2d43cba74c1f8
(4)   Message-Authenticator = 0xecea56c093bd1ae270396b6b5d36a48e
(4) session-state: No cached attributes
(4) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(4) suffix: No such realm "NULL"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 240 length 6
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x267c1fc6258c063a
(4) eap: Finished EAP session with state 0x267c1fc6258c063a
(4) eap: Previous EAP request found for state 0x267c1fc6258c063a, released
from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 241 length 881
(4) eap: EAP session adding &reply:State = 0x267c1fc6228d063a
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) Post-Auth-Type sub-section not found.  Ignoring.
(4) # Executing group from file /etc/freeradius/sites-enabled/default
(4) Sent Access-Challenge Id 127 from 192.168.100.201:1812 to
192.168.100.114:56557 length 0
(4)   EAP-Message =
0x01f10371190013024d54310e300c06035504080c0552616261743112301006035504070c0954616c2d566972747531223020060355040a0c195468652041726368626973686f70732053656d696e6172792e3128302606092a864886f70d0109011619746563686e6963616c4073656d696e6172792e6f
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x267c1fc6228d063a34f2d43cba74c1f8
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 128 from 192.168.100.114:56557 to
192.168.100.201:1812 length 193
(5)   User-Name = "pmatthew28"
(5)   NAS-Identifier = "802aa849cbcc"
(5)   NAS-Port = 0
(5)   Called-Station-Id = "82-2A-A8-4B-CB-CC:SeminaryWiFi"
(5)   Calling-Station-Id = "00-22-FB-6E-1D-C8"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Connect-Info = "CONNECT 0Mbps 802.11b"
(5)   EAP-Message = 0x02f1001119800000000715030100020230
(5)   State = 0x267c1fc6228d063a34f2d43cba74c1f8
(5)   Message-Authenticator = 0x52230ebc6ccc584dab38acbe01dc3884
(5) session-state: No cached attributes
(5) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   ->
FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(5) suffix: No such realm "NULL"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 241 length 17
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x267c1fc6228d063a
(5) eap: Finished EAP session with state 0x267c1fc6228d063a
(5) eap: Previous EAP request found for state 0x267c1fc6228d063a, released
from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 7 bytes
(5) eap_peap: Got complete TLS record (7 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.0 Alert [length 0002], fatal unknown_ca
(5) eap_peap: ERROR: TLS Alert read:fatal:unknown CA
(5) eap_peap: ERROR: TLS_accept: Failed in unknown state
(5) eap_peap: ERROR: Failed in __FUNCTION__ (SSL_read)
(5) eap_peap: ERROR: error:14094418:SSL routines:ssl3_read_bytes:tlsv1
alert unknown ca
(5) eap_peap: ERROR: error:140940E5:SSL routines:ssl3_read_bytes:ssl
handshake failure
(5) eap_peap: ERROR: System call (I/O) error (-1)
(5) eap_peap: ERROR: TLS receive handshake failed during operation
(5) eap_peap: ERROR: [eaptls process] = fail
(5) eap: ERROR: Failed continuing EAP PEAP (25) session.  EAP sub-module
failed
(5) eap: Sending EAP Failure (code 4) ID 241 length 4
(5) eap: Failed in EAP select
(5)     [eap] = invalid
(5)   } # authenticate = invalid
(5) Failed to authenticate the user
(5) Using Post-Auth-Type Reject
(5) # Executing group from file /etc/freeradius/sites-enabled/default
(5)   Post-Auth-Type REJECT {
(5) attr_filter.access_reject: EXPAND %{User-Name}
(5) attr_filter.access_reject:    --> pmatthew28
(5) attr_filter.access_reject: Matched entry DEFAULT at line 11
(5)     [attr_filter.access_reject] = updated
(5)     [eap] = noop
(5)     policy remove_reply_message_if_eap {
(5)       if (&reply:EAP-Message && &reply:Reply-Message) {
(5)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(5)       else {
(5)         [noop] = noop
(5)       } # else = noop
(5)     } # policy remove_reply_message_if_eap = noop
(5)   } # Post-Auth-Type REJECT = updated
(5) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(5) Sending delayed response
(5) Sent Access-Reject Id 128 from 192.168.100.201:1812 to
192.168.100.114:56557 length 44
(5)   EAP-Message = 0x04f10004
(5)   Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 123 with timestamp +72
(1) Cleaning up request packet ID 124 with timestamp +72
(2) Cleaning up request packet ID 125 with timestamp +72
(3) Cleaning up request packet ID 126 with timestamp +72
(4) Cleaning up request packet ID 127 with timestamp +72
(5) Cleaning up request packet ID 128 with timestamp +72
Ready to process requests

WORKING FROM RADTEST

(15) Received Access-Request Id 46 from 127.0.0.1:42690 to 127.0.0.1:1812
length 80
(15)   User-Name = "pmatthew28"
(15)   User-Password = "SerTaqbizli!3007"
(15)   NAS-IP-Address = 127.0.1.1
(15)   NAS-Port = 1812
(15)   Message-Authenticator = 0x44b7f7f1c0e39d7cba3cfe782ecb75bc
(15) # Executing section authorize from file
/etc/freeradius/sites-enabled/default
(15)   authorize {
(15)     policy filter_username {
(15)       if (&User-Name) {
(15)       if (&User-Name)  -> TRUE
(15)       if (&User-Name)  {
(15)         if (&User-Name =~ /@[^@]*@/ ) {
(15)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(15)         if (&User-Name =~ /\.\./ ) {
(15)         if (&User-Name =~ /\.\./ )  -> FALSE
(15)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(15)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(15)         if (&User-Name =~ /\.$/)  {
(15)         if (&User-Name =~ /\.$/)   -> FALSE
(15)         if (&User-Name =~ /@\./)  {
(15)         if (&User-Name =~ /@\./)   -> FALSE
(15)       } # if (&User-Name)  = notfound
(15)     } # policy filter_username = notfound
(15)     [preprocess] = ok
(15)     [chap] = noop
(15)     [mschap] = noop
(15) suffix: Checking for suffix after "@"
(15) suffix: No '@' in User-Name = "pmatthew28", looking up realm NULL
(15) suffix: No such realm "NULL"
(15)     [suffix] = noop
(15) eap: No EAP-Message, not doing EAP
(15)     [eap] = noop
(15)     [files] = noop
rlm_ldap (ldap): Reserved connection (9)
(15) ldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(15) ldap:    --> (cn=pmatthew28)
(15) ldap: Performing search in "ou=SeminaryOU,dc=seminary,dc=local" with
filter "(cn=pmatthew28)", scope "sub"
(15) ldap: Waiting for search result...
(15) ldap: User object found at DN
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15) ldap: Processing user attributes
(15) ldap: control:Password-With-Header +=
'{SSHA}MJQyy9ahOjIexdTm6qaygw/ne5qDGF07'
rlm_ldap (ldap): Released connection (9)
Need 7 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (10), 1 of 29 pending slots
used
rlm_ldap (ldap): Connecting to ldap://localhost:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(15)     [ldap] = updated
rlm_ldap (adldap): Reserved connection (7)
(15) adldap: EXPAND (cn=%{%{Stripped-User-Name}:-%{User-Name}})
(15) adldap:    --> (cn=pmatthew28)
(15) adldap: Performing search in "ou=School,dc=seminary,dc=ad" with filter
"(cn=pmatthew28)", scope "sub"
(15) adldap: Waiting for search result...
(15) adldap: The specified DN wasn't found
(15) adldap: Search returned no results
rlm_ldap (adldap): Released connection (7)
Need 7 more connections to reach 10 spares
rlm_ldap (adldap): Opening additional connection (10), 1 of 29 pending
slots used
rlm_ldap (adldap): Connecting to ldap://localhost:389
rlm_ldap (adldap): Waiting for bind result...
rlm_ldap (adldap): Bind successful
(15)     [adldap] = notfound
(15)     [expiration] = noop
(15)     [logintime] = noop
(15) pap: Converted: &control:Password-With-Header ->
&control:SSHA1-Password
(15) pap: Removing &control:Password-With-Header
(15) pap: Normalizing SSHA1-Password from base64 encoding, 32 bytes -> 24
bytes
(15)     [pap] = updated
(15)   } # authorize = updated
(15) Found Auth-Type = PAP
(15) # Executing group from file /etc/freeradius/sites-enabled/default
(15)   Auth-Type PAP {
(15) pap: Login attempt with password
(15) pap: Comparing with "known-good" SSHA-Password
(15) pap: User authenticated successfully
(15)     [pap] = ok
rlm_ldap (ldap): Reserved connection (8)
(15) ldap: Login attempt by "pmatthew28"
(15) ldap: Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15) ldap: Waiting for bind result...
(15) ldap: Bind successful
(15) ldap: Bind as user
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" was
successful
rlm_ldap (ldap): Released connection (8)
(15)     [ldap] = ok
rlm_ldap (adldap): Reserved connection (9)
(15) adldap: Login attempt by "pmatthew28"
(15) adldap: Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15) adldap: Waiting for bind result...
(15) adldap: Bind successful
(15) adldap: Bind as user
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" was
successful
rlm_ldap (adldap): Released connection (9)
(15)     [adldap] = ok
(15)   } # Auth-Type PAP = ok
(15) # Executing section post-auth from file
/etc/freeradius/sites-enabled/default
(15)   post-auth {
(15)     update {
(15)       No attributes updated
(15)     } # update = noop
(15)     if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad") {
(15)     Searching for user in group
"cn=Teachers,ou=School,dc=seminary,dc=ad"
rlm_ldap (ldap): Reserved connection (7)
(15)     Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15)     Checking user object's memberOf attributes
(15)       Performing unfiltered search in
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope
"base"
(15)       Waiting for search result...
(15)     Processing memberOf value
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
rlm_ldap (ldap): Released connection (7)
(15)     User is not a member of "cn=Teachers,ou=School,dc=seminary,dc=ad"
(15)     if (Ldap-Group == "cn=Teachers,ou=School,dc=seminary,dc=ad")  ->
FALSE
(15)     if (Ldap-Group ==
"cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local") {
(15)     Searching for user in group
"cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local"
rlm_ldap (ldap): Reserved connection (9)
(15)     Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15)     Checking user object's memberOf attributes
(15)       Performing unfiltered search in
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope
"base"
(15)       Waiting for search result...
(15)     Processing memberOf value
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
rlm_ldap (ldap): Released connection (9)
(15)     User is not a member of
"cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local"
(15)     if (Ldap-Group ==
"cn=SeminaryAdmin,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
(15)     if (Ldap-Group ==
"cn=Formators,ou=SeminaryOU,dc=seminary,dc=local") {
(15)     Searching for user in group
"cn=Formators,ou=SeminaryOU,dc=seminary,dc=local"
rlm_ldap (ldap): Reserved connection (10)
(15)     Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15)     Checking user object's memberOf attributes
(15)       Performing unfiltered search in
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope
"base"
(15)       Waiting for search result...
(15)     Processing memberOf value
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
rlm_ldap (ldap): Released connection (10)
(15)     User is not a member of
"cn=Formators,ou=SeminaryOU,dc=seminary,dc=local"
(15)     if (Ldap-Group ==
"cn=Formators,ou=SeminaryOU,dc=seminary,dc=local")  -> FALSE
(15)     if (Ldap-Group ==
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local") {
(15)     Searching for user in group
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
rlm_ldap (ldap): Reserved connection (8)
(15)     Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15)     Checking user object's memberOf attributes
(15)       Waiting for bind result...
(15)       Bind successful
(15)       Performing unfiltered search in
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope
"base"
(15)       Waiting for search result...
(15)     Processing memberOf value
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
(15)     User found in group DN
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local". Comparison between
membership: dn, check: dn
rlm_ldap (ldap): Released connection (8)
(15)     if (Ldap-Group ==
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  -> TRUE
(15)     if (Ldap-Group ==
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  {
(15)       update reply {
(15)         Tunnel-Type = VLAN
(15)         Tunnel-Medium-Type = IEEE-802
(15)         Tunnel-Private-Group-ID = "11"
(15)       } # update reply = noop
(15)     } # if (Ldap-Group ==
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local")  = noop
(15)     if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local") {
(15)     Searching for user in group
"cn=Staff,ou=SeminaryOU,dc=seminary,dc=local"
rlm_ldap (ldap): Reserved connection (7)
(15)     Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15)     Checking user object's memberOf attributes
(15)       Performing unfiltered search in
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope
"base"
(15)       Waiting for search result...
(15)     Processing memberOf value
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
rlm_ldap (ldap): Released connection (7)
(15)     User is not a member of
"cn=Staff,ou=SeminaryOU,dc=seminary,dc=local"
(15)     if (Ldap-Group == "cn=Staff,ou=SeminaryOU,dc=seminary,dc=local")
 -> FALSE
(15)     if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local") {
(15)     Searching for user in group
"cn=School,ou=SeminaryOU,dc=seminary,dc=local"
rlm_ldap (ldap): Reserved connection (9)
(15)     Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15)     Checking user object's memberOf attributes
(15)       Performing unfiltered search in
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local", scope
"base"
(15)       Waiting for search result...
(15)     Processing memberOf value
"cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local" as a DN
rlm_ldap (ldap): Released connection (9)
(15)     User is not a member of
"cn=School,ou=SeminaryOU,dc=seminary,dc=local"
(15)     if (Ldap-Group == "cn=School,ou=SeminaryOU,dc=seminary,dc=local")
 -> FALSE
(15) ldap: EXPAND .
(15) ldap:    --> .
(15) ldap: EXPAND Authenticated at %S
(15) ldap:    --> Authenticated at 2017-08-31 20:23:26
rlm_ldap (ldap): Reserved connection (10)
(15) ldap: Using user DN from request
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15) ldap: Modifying object with DN
"cn=pmatthew28,cn=Seminarians,ou=SeminaryOU,dc=seminary,dc=local"
(15) ldap: Waiting for modify result...
rlm_ldap (ldap): Released connection (10)
(15)     [ldap] = ok
(15)     [exec] = noop
(15)     policy remove_reply_message_if_eap {
(15)       if (&reply:EAP-Message && &reply:Reply-Message) {
(15)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(15)       else {
(15)         [noop] = noop
(15)       } # else = noop
(15)     } # policy remove_reply_message_if_eap = noop
(15)   } # post-auth = ok
(15) Sent Access-Accept Id 46 from 127.0.0.1:1812 to 127.0.0.1:42690 length
0
(15)   Tunnel-Type = VLAN
(15)   Tunnel-Medium-Type = IEEE-802
(15)   Tunnel-Private-Group-Id = "11"
(15) Finished request
Waking up in 4.9 seconds.

Matthew Pulis
mobile / WhatsApp:   +356 79539404

Matthew Pulis

Alan DeKok

Matthew Pulis

Alan DeKok

Matthew Pulis

Matthew Pulis

Matthew Newton

Alan Buxey

Alan Buxey

tags

participants (4)