mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication

8 Oct 2015

      Hi @all.
Not sure if we have a bug, but i tried to get an AD authentication about ldap more then 4 days. I read a lot of documentation and testet a lot of stuff.i have the following:If i try to login via "radtest -x test testpwd 127.0.0.1:18120 0 testing123" on the linux console, everything is working via ldap. If i try this over the 802.1X AccessPoint, it doesn't work. If i try the same with a defined user in users like "bob Cleartext-Password := "hello"" over the accessPoint, it works fine.Anything goes wrong with the password if we i use peap:
via console with domain User over inner-tunnel:(1) Received Access-Request Id 7 from 127.0.0.1:48026 to 127.0.0.1:18120 length 74(1) User-Name = "test"(1) User-Password = "password"(1) NAS-IP-Address = 192.168.8.27(1) NAS-Port = 0(1) Message-Authenticator = 0xc7c247ef109fb66332c18aab75068b33(1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(1) authorize {(1) [files] = noop(1) [mschap] = noop(1) suffix: Checking for suffix after "@"(1) suffix: No '@' in User-Name = "test", looking up realm NULL(1) suffix: No such realm "NULL"(1) [suffix] = noop(1) update control {(1) Proxy-To-Realm := LOCAL(1) } # update control = noop(1) eap: No EAP-Message, not doing EAP(1) [eap] = noop(1) [expiration] = noop(1) [logintime] = nooprlm_ldap (ldap_domain): Reserved connection (0)(1) ldap_domain: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(1) ldap_domain: --> (sAMAccountName=test)(1) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with filter "(sAMAccountName=test)", scope "sub"(1) ldap_domain: Waiting for search result...(1) ldap_domain: User object found at DN "CN=Test TEST,CN=Users,DC=domain,DC=local"(1) ldap_domain: Processing user attributes(1) ldap_domain: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute(1) ldap_domain: WARNING: PAP authentication will NOT work with Active Directory (if that is what you were trying to configure)rlm_ldap (ldap_domain): Released connection (0)rlm_ldap (ldap_domain): Need 5 more connections to reach 10 sparesrlm_ldap (ldap_domain): Opening additional connection (5), 1 of 27 pending slots usedrlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389rlm_ldap (ldap_domain): Waiting for bind result...rlm_ldap (ldap_domain): Bind successful(1) [ldap_domain] = ok(1) if ((ok || updated) && User-Password) {(1) if ((ok || updated) && User-Password) -> TRUE(1) if ((ok || updated) && User-Password) {(1) update {(1) control:Auth-Type := LDAP(1) } # update = noop(1) } # if ((ok || updated) && User-Password) = noop(1) [pap] = noop(1) if (User-Password) {(1) if (User-Password) -> TRUE(1) if (User-Password) {(1) update control {(1) Auth-Type := LDAP(1) } # update control = noop(1) } # if (User-Password) = noop(1) } # authorize = ok(1) Found Auth-Type = LDAP(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(1) Auth-Type LDAP {rlm_ldap (ldap_domain): Reserved connection (1)(1) ldap_domain: Login attempt by "test"(1) ldap_domain: Using user DN from request "CN=Test TEST,CN=Users,DC=domain,DC=local"(1) ldap_domain: Waiting for bind result...(1) ldap_domain: Bind successful(1) ldap_domain: Bind as user "CN=Test TEST,CN=Users,DC=domain,DC=local" was successfulrlm_ldap (ldap_domain): Released connection (1)(1) [ldap_domain] = ok(1) } # Auth-Type LDAP = ok(1) Sent Access-Accept Id 7 from 127.0.0.1:18120 to 127.0.0.1:48026 length 0(1) Finished requestWaking up in 0.3 seconds.(0) Cleaning up request packet ID 130 with timestamp +4Waking up in 4.6 seconds.(1) Cleaning up request packet ID 7 with timestamp +9Ready to process requests
via AccessPoint with domain User:(2) Received Access-Request Id 42 from 192.168.2.250:3072 to 192.168.8.27:1812 length 178(2) User-Name = "test"(2) Service-Type = Framed-User(2) NAS-IP-Address = 192.168.2.250(2) NAS-Port = 10(2) NAS-Port-Id = "10"(2) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(2) Calling-Station-Id = "B8-E8-56-41-2C-2A"(2) Connect-Info = "CONNECT 54 Mbps 802.11g"(2) NAS-Identifier = "AP-domain01"(2) NAS-Port-Type = Wireless-802.11(2) Framed-MTU = 1500(2) EAP-Message = 0x020100090174657374(2) Message-Authenticator = 0x83d8e6487c3977ae8116026c26702525(2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(2) authorize {(2) [files] = noop(2) [preprocess] = ok(2) suffix: Checking for suffix after "@"(2) suffix: No '@' in User-Name = "test", looking up realm NULL(2) suffix: No such realm "NULL"(2) [suffix] = noop(2) eap: Peer sent EAP Response (code 2) ID 1 length 9(2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(2) [eap] = ok(2) } # authorize = ok(2) Found Auth-Type = EAP(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(2) authenticate {(2) eap: Peer sent packet with method EAP Identity (1)(2) eap: Calling submodule eap_peap to process data(2) eap_peap: Initiating new EAP-TLS session(2) eap_peap: [eaptls start] = request(2) eap: Sending EAP Request (code 1) ID 2 length 6(2) eap: EAP session adding &reply:State = 0x714e61bf714c78fd(2) [eap] = handled(2) } # authenticate = handled(2) Using Post-Auth-Type Challenge(2) Post-Auth-Type sub-section not found. Ignoring.(2) Sent Access-Challenge Id 42 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(2) EAP-Message = 0x010200061920(2) Message-Authenticator = 0x00000000000000000000000000000000(2) State = 0x714e61bf714c78fd13de40933f3a43c8(2) Finished requestWaking up in 4.9 seconds.(3) Received Access-Request Id 58 from 192.168.2.250:3072 to 192.168.8.27:1812 length 339(3) User-Name = "test"(3) Service-Type = Framed-User(3) NAS-IP-Address = 192.168.2.250(3) NAS-Port = 10(3) NAS-Port-Id = "10"(3) State = 0x714e61bf714c78fd13de40933f3a43c8(3) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(3) Calling-Station-Id = "B8-E8-56-41-2C-2A"(3) Connect-Info = "CONNECT 54 Mbps 802.11g"(3) NAS-Identifier = "AP-domain01"(3) NAS-Port-Type = Wireless-802.11(3) Framed-MTU = 1500(3) EAP-Message = 0x0202009819800000008e160301008901000085030156162f87a13e4465c695b7754a35671de87e37f1c9c068c51ee0c258d39cc34f00004a00ffc024c023c00ac009c008c028c027c014c013c012c026c025c005c004c003c02ac029c00fc00ec00d006b0067003900330016003d003c0035002f000ac0(3) Message-Authenticator = 0x1b3f4a72c416640c87d6f902d0effe2e(3) session-state: No cached attributes(3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(3) authorize {(3) [files] = noop(3) [preprocess] = ok(3) suffix: Checking for suffix after "@"(3) suffix: No '@' in User-Name = "test", looking up realm NULL(3) suffix: No such realm "NULL"(3) [suffix] = noop(3) eap: Peer sent EAP Response (code 2) ID 2 length 152(3) eap: Continuing tunnel setup(3) [eap] = ok(3) } # authorize = ok(3) Found Auth-Type = EAP(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(3) authenticate {(3) eap: Expiring EAP session with state 0x714e61bf714c78fd(3) eap: Finished EAP session with state 0x714e61bf714c78fd(3) eap: Previous EAP request found for state 0x714e61bf714c78fd, released from the list(3) eap: Peer sent packet with method EAP PEAP (25)(3) eap: Calling submodule eap_peap to process data(3) eap_peap: Continuing EAP-TLS(3) eap_peap: Peer indicated complete TLS record size will be 142 bytes(3) eap_peap: Got complete TLS record (142 bytes)(3) eap_peap: [eaptls verify] = length included(3) eap_peap: (other): before/accept initialization(3) eap_peap: TLS_accept: before/accept initialization(3) eap_peap: <<< TLS 1.0 Handshake [length 0089], ClientHello(3) eap_peap: TLS_accept: SSLv3 read client hello A(3) eap_peap: >>> TLS 1.0 Handshake [length 0039], ServerHello(3) eap_peap: TLS_accept: SSLv3 write server hello A(3) eap_peap: >>> TLS 1.0 Handshake [length 0964], Certificate(3) eap_peap: TLS_accept: SSLv3 write certificate A(3) eap_peap: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange(3) eap_peap: TLS_accept: SSLv3 write key exchange A(3) eap_peap: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone(3) eap_peap: TLS_accept: SSLv3 write server done A(3) eap_peap: TLS_accept: SSLv3 flush data(3) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A(3) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A(3) eap_peap: In SSL Handshake Phase(3) eap_peap: In SSL Accept mode(3) eap_peap: [eaptls process] = handled(3) eap: Sending EAP Request (code 1) ID 3 length 1004(3) eap: EAP session adding &reply:State = 0x714e61bf704d78fd(3) [eap] = handled(3) } # authenticate = handled(3) Using Post-Auth-Type Challenge(3) Post-Auth-Type sub-section not found. Ignoring.(3) Sent Access-Challenge Id 58 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(3) EAP-Message = 0x010303ec19c000000b00160301003902000035030194873ddf6cee275a11fcde492d5ae2b8261f83dd50ed9063133a31be2e3d24b500c01400000dff01000100000b00040300010216030109640b00096000095d0005a7308205a33082048ba0030201020213720000003379461d9f383b20c900010000(3) Message-Authenticator = 0x00000000000000000000000000000000(3) State = 0x714e61bf704d78fd13de40933f3a43c8(3) Finished requestWaking up in 4.9 seconds.(4) Received Access-Request Id 46 from 192.168.2.250:3072 to 192.168.8.27:1812 length 193(4) User-Name = "test"(4) Service-Type = Framed-User(4) NAS-IP-Address = 192.168.2.250(4) NAS-Port = 10(4) NAS-Port-Id = "10"(4) State = 0x714e61bf704d78fd13de40933f3a43c8(4) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(4) Calling-Station-Id = "B8-E8-56-41-2C-2A"(4) Connect-Info = "CONNECT 54 Mbps 802.11g"(4) NAS-Identifier = "AP-domain01"(4) NAS-Port-Type = Wireless-802.11(4) Framed-MTU = 1500(4) EAP-Message = 0x020300061900(4) Message-Authenticator = 0xe7c2576faeb3228ae2d056b77bc6cce8(4) session-state: No cached attributes(4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(4) authorize {(4) [files] = noop(4) [preprocess] = ok(4) suffix: Checking for suffix after "@"(4) suffix: No '@' in User-Name = "test", looking up realm NULL(4) suffix: No such realm "NULL"(4) [suffix] = noop(4) eap: Peer sent EAP Response (code 2) ID 3 length 6(4) eap: Continuing tunnel setup(4) [eap] = ok(4) } # authorize = ok(4) Found Auth-Type = EAP(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(4) authenticate {(4) eap: Expiring EAP session with state 0x714e61bf704d78fd(4) eap: Finished EAP session with state 0x714e61bf704d78fd(4) eap: Previous EAP request found for state 0x714e61bf704d78fd, released from the list(4) eap: Peer sent packet with method EAP PEAP (25)(4) eap: Calling submodule eap_peap to process data(4) eap_peap: Continuing EAP-TLS(4) eap_peap: Peer ACKed our handshake fragment(4) eap_peap: [eaptls verify] = request(4) eap_peap: [eaptls process] = handled(4) eap: Sending EAP Request (code 1) ID 4 length 1000(4) eap: EAP session adding &reply:State = 0x714e61bf734a78fd(4) [eap] = handled(4) } # authenticate = handled(4) Using Post-Auth-Type Challenge(4) Post-Auth-Type sub-section not found. Ignoring.(4) Sent Access-Challenge Id 46 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(4) EAP-Message = 0x010403e81940b53081b206082b060105050730028681a56c6461703a2f2f2f434e3d6e656465636f253230476d624825323043412c434e3d4149412c434e3d5075626c69632532304b657925323053657276696365732c434e3d53657276696365732c434e3d436f6e66696775726174696f6e2c44433d(4) Message-Authenticator = 0x00000000000000000000000000000000(4) State = 0x714e61bf734a78fd13de40933f3a43c8(4) Finished requestWaking up in 4.9 seconds.(2) Cleaning up request packet ID 42 with timestamp +151(3) Cleaning up request packet ID 58 with timestamp +151(4) Cleaning up request packet ID 46 with timestamp +151Ready to process requests(5) Received Access-Request Id 216 from 192.168.2.250:3072 to 192.168.8.27:1812 length 193(5) User-Name = "test"(5) Service-Type = Framed-User(5) NAS-IP-Address = 192.168.2.250(5) NAS-Port = 10(5) NAS-Port-Id = "10"(5) State = 0x714e61bf734a78fd13de40933f3a43c8(5) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(5) Calling-Station-Id = "B8-E8-56-41-2C-2A"(5) Connect-Info = "CONNECT 54 Mbps 802.11g"(5) NAS-Identifier = "AP-domain01"(5) NAS-Port-Type = Wireless-802.11(5) Framed-MTU = 1500(5) EAP-Message = 0x020400061900(5) Message-Authenticator = 0xdf4b4a18dbd046ae4568ed5b900675ca(5) session-state: No cached attributes(5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(5) authorize {(5) [files] = noop(5) [preprocess] = ok(5) suffix: Checking for suffix after "@"(5) suffix: No '@' in User-Name = "test", looking up realm NULL(5) suffix: No such realm "NULL"(5) [suffix] = noop(5) eap: Peer sent EAP Response (code 2) ID 4 length 6(5) eap: Continuing tunnel setup(5) [eap] = ok(5) } # authorize = ok(5) Found Auth-Type = EAP(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(5) authenticate {(5) eap: Expiring EAP session with state 0x714e61bf734a78fd(5) eap: Finished EAP session with state 0x714e61bf734a78fd(5) eap: Previous EAP request found for state 0x714e61bf734a78fd, released from the list(5) eap: Peer sent packet with method EAP PEAP (25)(5) eap: Calling submodule eap_peap to process data(5) eap_peap: Continuing EAP-TLS(5) eap_peap: Peer ACKed our handshake fragment(5) eap_peap: [eaptls verify] = request(5) eap_peap: [eaptls process] = handled(5) eap: Sending EAP Request (code 1) ID 5 length 834(5) eap: EAP session adding &reply:State = 0x714e61bf724b78fd(5) [eap] = handled(5) } # authenticate = handled(5) Using Post-Auth-Type Challenge(5) Post-Auth-Type sub-section not found. Ignoring.(5) Sent Access-Challenge Id 216 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(5) EAP-Message = 0x01050342190068d99b627f3ca6561e6c1dcd0e8bb529b85d2515a36c2ba6f906ee9a223e619decfff2f24ef8674307735d591964d50ac988776a55970203010001a3819130818e301306092b060104018237140204061e0400430041300e0603551d0f0101ff040403020186300f0603551d130101ff04(5) Message-Authenticator = 0x00000000000000000000000000000000(5) State = 0x714e61bf724b78fd13de40933f3a43c8(5) Finished requestWaking up in 4.9 seconds.(6) Received Access-Request Id 228 from 192.168.2.250:3072 to 192.168.8.27:1812 length 331(6) User-Name = "test"(6) Service-Type = Framed-User(6) NAS-IP-Address = 192.168.2.250(6) NAS-Port = 10(6) NAS-Port-Id = "10"(6) State = 0x714e61bf724b78fd13de40933f3a43c8(6) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(6) Calling-Station-Id = "B8-E8-56-41-2C-2A"(6) Connect-Info = "CONNECT 54 Mbps 802.11g"(6) NAS-Identifier = "AP-domain01"(6) NAS-Port-Type = Wireless-802.11(6) Framed-MTU = 1500(6) EAP-Message = 0x0205009019800000008616030100461000004241041ddb75e112e6a51620e1d90e79faf858ba440ee51859f6f36dbb3d61474b8fc891e7a246f576a1aef8372b95f81c96af01b2ba44e938f2dde2e5fa57032812201403010001011603010030680540b7b149e993c9f964d5e0a79cda35934c4c8e292f(6) Message-Authenticator = 0x96295d1faa87d10973b6fe400102f545(6) session-state: No cached attributes(6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(6) authorize {(6) [files] = noop(6) [preprocess] = ok(6) suffix: Checking for suffix after "@"(6) suffix: No '@' in User-Name = "test", looking up realm NULL(6) suffix: No such realm "NULL"(6) [suffix] = noop(6) eap: Peer sent EAP Response (code 2) ID 5 length 144(6) eap: Continuing tunnel setup(6) [eap] = ok(6) } # authorize = ok(6) Found Auth-Type = EAP(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(6) authenticate {(6) eap: Expiring EAP session with state 0x714e61bf724b78fd(6) eap: Finished EAP session with state 0x714e61bf724b78fd(6) eap: Previous EAP request found for state 0x714e61bf724b78fd, released from the list(6) eap: Peer sent packet with method EAP PEAP (25)(6) eap: Calling submodule eap_peap to process data(6) eap_peap: Continuing EAP-TLS(6) eap_peap: Peer indicated complete TLS record size will be 134 bytes(6) eap_peap: Got complete TLS record (134 bytes)(6) eap_peap: [eaptls verify] = length included(6) eap_peap: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange(6) eap_peap: TLS_accept: SSLv3 read client key exchange A(6) eap_peap: <<< TLS 1.0 ChangeCipherSpec length 0001 eap_peap: <<< TLS 1.0 Handshake [length 0010], Finished(6) eap_peap: TLS_accept: SSLv3 read finished A(6) eap_peap: >>> TLS 1.0 ChangeCipherSpec length 0001 eap_peap: TLS_accept: SSLv3 write change cipher spec A(6) eap_peap: >>> TLS 1.0 Handshake [length 0010], Finished(6) eap_peap: TLS_accept: SSLv3 write finished A(6) eap_peap: TLS_accept: SSLv3 flush data(6) eap_peap: (other): SSL negotiation finished successfully(6) eap_peap: SSL Connection Established(6) eap_peap: [eaptls process] = handled(6) eap: Sending EAP Request (code 1) ID 6 length 65(6) eap: EAP session adding &reply:State = 0x714e61bf754878fd(6) [eap] = handled(6) } # authenticate = handled(6) Using Post-Auth-Type Challenge(6) Post-Auth-Type sub-section not found. Ignoring.(6) Sent Access-Challenge Id 228 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(6) EAP-Message = 0x01060041190014030100010116030100301b8a91b9523361e58c472a6f4bedc223a3780b77e80492846d5f574cd2db238cdd236645e7e78ed7e706e2dd3aecd6a2(6) Message-Authenticator = 0x00000000000000000000000000000000(6) State = 0x714e61bf754878fd13de40933f3a43c8(6) Finished requestWaking up in 4.8 seconds.(7) Received Access-Request Id 77 from 192.168.2.250:3072 to 192.168.8.27:1812 length 193(7) User-Name = "test"(7) Service-Type = Framed-User(7) NAS-IP-Address = 192.168.2.250(7) NAS-Port = 10(7) NAS-Port-Id = "10"(7) State = 0x714e61bf754878fd13de40933f3a43c8(7) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(7) Calling-Station-Id = "B8-E8-56-41-2C-2A"(7) Connect-Info = "CONNECT 54 Mbps 802.11g"(7) NAS-Identifier = "AP-domain01"(7) NAS-Port-Type = Wireless-802.11(7) Framed-MTU = 1500(7) EAP-Message = 0x020600061900(7) Message-Authenticator = 0xaabe36b47f3a6a409dd2ec806970d983(7) session-state: No cached attributes(7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(7) authorize {(7) [files] = noop(7) [preprocess] = ok(7) suffix: Checking for suffix after "@"(7) suffix: No '@' in User-Name = "test", looking up realm NULL(7) suffix: No such realm "NULL"(7) [suffix] = noop(7) eap: Peer sent EAP Response (code 2) ID 6 length 6(7) eap: Continuing tunnel setup(7) [eap] = ok(7) } # authorize = ok(7) Found Auth-Type = EAP(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(7) authenticate {(7) eap: Expiring EAP session with state 0x714e61bf754878fd(7) eap: Finished EAP session with state 0x714e61bf754878fd(7) eap: Previous EAP request found for state 0x714e61bf754878fd, released from the list(7) eap: Peer sent packet with method EAP PEAP (25)(7) eap: Calling submodule eap_peap to process data(7) eap_peap: Continuing EAP-TLS(7) eap_peap: Peer ACKed our handshake fragment. handshake is finished(7) eap_peap: [eaptls verify] = success(7) eap_peap: [eaptls process] = success(7) eap_peap: Session established. Decoding tunneled attributes(7) eap_peap: PEAP state TUNNEL ESTABLISHED(7) eap: Sending EAP Request (code 1) ID 7 length 43(7) eap: EAP session adding &reply:State = 0x714e61bf744978fd(7) [eap] = handled(7) } # authenticate = handled(7) Using Post-Auth-Type Challenge(7) Post-Auth-Type sub-section not found. Ignoring.(7) Sent Access-Challenge Id 77 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(7) EAP-Message = 0x0107002b19001703010020a6135f04ae6dffd42c8ef419d75113ac720759219e31f74d4247b6b610e9a071(7) Message-Authenticator = 0x00000000000000000000000000000000(7) State = 0x714e61bf744978fd13de40933f3a43c8(7) Finished requestWaking up in 4.8 seconds.(8) Received Access-Request Id 86 from 192.168.2.250:3072 to 192.168.8.27:1812 length 230(8) User-Name = "test"(8) Service-Type = Framed-User(8) NAS-IP-Address = 192.168.2.250(8) NAS-Port = 10(8) NAS-Port-Id = "10"(8) State = 0x714e61bf744978fd13de40933f3a43c8(8) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(8) Calling-Station-Id = "B8-E8-56-41-2C-2A"(8) Connect-Info = "CONNECT 54 Mbps 802.11g"(8) NAS-Identifier = "AP-domain01"(8) NAS-Port-Type = Wireless-802.11(8) Framed-MTU = 1500(8) EAP-Message = 0x0207002b19001703010020aa7e796b21bdc47f3c2b751c50ffbf8aaaafc3ad47a3a4a6dab850e706bf7227(8) Message-Authenticator = 0xb0ef481a7beafe09a46383286750ead8(8) session-state: No cached attributes(8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(8) authorize {(8) [files] = noop(8) [preprocess] = ok(8) suffix: Checking for suffix after "@"(8) suffix: No '@' in User-Name = "test", looking up realm NULL(8) suffix: No such realm "NULL"(8) [suffix] = noop(8) eap: Peer sent EAP Response (code 2) ID 7 length 43(8) eap: Continuing tunnel setup(8) [eap] = ok(8) } # authorize = ok(8) Found Auth-Type = EAP(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(8) authenticate {(8) eap: Expiring EAP session with state 0x714e61bf744978fd(8) eap: Finished EAP session with state 0x714e61bf744978fd(8) eap: Previous EAP request found for state 0x714e61bf744978fd, released from the list(8) eap: Peer sent packet with method EAP PEAP (25)(8) eap: Calling submodule eap_peap to process data(8) eap_peap: Continuing EAP-TLS(8) eap_peap: [eaptls verify] = ok(8) eap_peap: Done initial handshake(8) eap_peap: [eaptls process] = ok(8) eap_peap: Session established. Decoding tunneled attributes(8) eap_peap: PEAP state WAITING FOR INNER IDENTITY(8) eap_peap: Identity - test(8) eap_peap: Got inner identity 'test'(8) eap_peap: Setting default EAP type for tunneled EAP session(8) eap_peap: Got tunneled request(8) eap_peap: EAP-Message = 0x020700090174657374(8) eap_peap: Setting User-Name to test(8) eap_peap: Sending tunneled request to inner-tunnel(8) eap_peap: EAP-Message = 0x020700090174657374(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1(8) eap_peap: User-Name = "test"(8) Virtual server inner-tunnel received request(8) EAP-Message = 0x020700090174657374(8) FreeRADIUS-Proxied-To = 127.0.0.1(8) User-Name = "test"(8) server inner-tunnel {(8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(8) authorize {(8) [files] = noop(8) [mschap] = noop(8) suffix: Checking for suffix after "@"(8) suffix: No '@' in User-Name = "test", looking up realm NULL(8) suffix: No such realm "NULL"(8) [suffix] = noop(8) update control {(8) Proxy-To-Realm := LOCAL(8) } # update control = noop(8) eap: Peer sent EAP Response (code 2) ID 7 length 9(8) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(8) [eap] = ok(8) } # authorize = ok(8) Found Auth-Type = EAP(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(8) authenticate {(8) eap: Peer sent packet with method EAP Identity (1)(8) eap: Calling submodule eap_mschapv2 to process data(8) eap_mschapv2: Issuing Challenge(8) eap: Sending EAP Request (code 1) ID 8 length 43(8) eap: EAP session adding &reply:State = 0xbd1845cebd105fc4(8) [eap] = handled(8) } # authenticate = handled(8) } # server inner-tunnel(8) Virtual server sending reply(8) EAP-Message = 0x0108002b1a0108002610ba684a0833e561a9e780eedf9829518f667265657261646975732d332e302e3131(8) Message-Authenticator = 0x00000000000000000000000000000000(8) State = 0xbd1845cebd105fc4a22a1c51082d7ecf(8) eap_peap: Got tunneled reply code 11(8) eap_peap: EAP-Message = 0x0108002b1a0108002610ba684a0833e561a9e780eedf9829518f667265657261646975732d332e302e3131(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(8) eap_peap: State = 0xbd1845cebd105fc4a22a1c51082d7ecf(8) eap_peap: Got tunneled reply RADIUS code 11(8) eap_peap: EAP-Message = 0x0108002b1a0108002610ba684a0833e561a9e780eedf9829518f667265657261646975732d332e302e3131(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(8) eap_peap: State = 0xbd1845cebd105fc4a22a1c51082d7ecf(8) eap_peap: Got tunneled Access-Challenge(8) eap: Sending EAP Request (code 1) ID 8 length 75(8) eap: EAP session adding &reply:State = 0x714e61bf774678fd(8) [eap] = handled(8) } # authenticate = handled(8) Using Post-Auth-Type Challenge(8) Post-Auth-Type sub-section not found. Ignoring.(8) Sent Access-Challenge Id 86 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(8) EAP-Message = 0x0108004b19001703010040c6831d9a1c5c30c64d40563c5fa21ee3cc103adbb4e99517563c9e67d781aefdd941ba0f19bc124976046e7471792eec1d4771c20abf67b78282a152634eed5e(8) Message-Authenticator = 0x00000000000000000000000000000000(8) State = 0x714e61bf774678fd13de40933f3a43c8(8) Finished requestWaking up in 4.8 seconds.(5) Cleaning up request packet ID 216 with timestamp +181(6) Cleaning up request packet ID 228 with timestamp +181(7) Cleaning up request packet ID 77 with timestamp +181(8) Cleaning up request packet ID 86 with timestamp +181Ready to process requests(9) Received Access-Request Id 14 from 192.168.2.250:3072 to 192.168.8.27:1812 length 278(9) User-Name = "test"(9) Service-Type = Framed-User(9) NAS-IP-Address = 192.168.2.250(9) NAS-Port = 10(9) NAS-Port-Id = "10"(9) State = 0x714e61bf774678fd13de40933f3a43c8(9) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(9) Calling-Station-Id = "B8-E8-56-41-2C-2A"(9) Connect-Info = "CONNECT 54 Mbps 802.11g"(9) NAS-Identifier = "AP-domain01"(9) NAS-Port-Type = Wireless-802.11(9) Framed-MTU = 1500(9) EAP-Message = 0x0208005b1900170301005041a588e579c1a63e94555d08bea2166f123e059dea3d7f8a17bcbfd8e4f4a54c876ceee7b33a4a101a4afd0dc078e77a3c8163b76b6c9e9567e6954214f5e1ec01cdafcd013db92c58ae136658519d20(9) Message-Authenticator = 0xac0b3e273dede594c80988c13eaafd54(9) session-state: No cached attributes(9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(9) authorize {(9) [files] = noop(9) [preprocess] = ok(9) suffix: Checking for suffix after "@"(9) suffix: No '@' in User-Name = "test", looking up realm NULL(9) suffix: No such realm "NULL"(9) [suffix] = noop(9) eap: Peer sent EAP Response (code 2) ID 8 length 91(9) eap: Continuing tunnel setup(9) [eap] = ok(9) } # authorize = ok(9) Found Auth-Type = EAP(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(9) authenticate {(9) eap: Expiring EAP session with state 0xbd1845cebd105fc4(9) eap: Finished EAP session with state 0x714e61bf774678fd(9) eap: Previous EAP request found for state 0x714e61bf774678fd, released from the list(9) eap: Peer sent packet with method EAP PEAP (25)(9) eap: Calling submodule eap_peap to process data(9) eap_peap: Continuing EAP-TLS(9) eap_peap: [eaptls verify] = ok(9) eap_peap: Done initial handshake(9) eap_peap: [eaptls process] = ok(9) eap_peap: Session established. Decoding tunneled attributes(9) eap_peap: PEAP state phase2(9) eap_peap: EAP method MSCHAPv2 (26)(9) eap_peap: Got tunneled request(9) eap_peap: EAP-Message = 0x0208003f1a0208003a316670e0343c5cde7c22158c2f3b1e05bd0000000000000000e36cbc3c625721798db23c5fc199979df656a52246010d310074657374(9) eap_peap: Setting User-Name to test(9) eap_peap: Sending tunneled request to inner-tunnel(9) eap_peap: EAP-Message = 0x0208003f1a0208003a316670e0343c5cde7c22158c2f3b1e05bd0000000000000000e36cbc3c625721798db23c5fc199979df656a52246010d310074657374(9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1(9) eap_peap: User-Name = "test"(9) eap_peap: State = 0xbd1845cebd105fc4a22a1c51082d7ecf(9) Virtual server inner-tunnel received request(9) EAP-Message = 0x0208003f1a0208003a316670e0343c5cde7c22158c2f3b1e05bd0000000000000000e36cbc3c625721798db23c5fc199979df656a52246010d310074657374(9) FreeRADIUS-Proxied-To = 127.0.0.1(9) User-Name = "test"(9) State = 0xbd1845cebd105fc4a22a1c51082d7ecf(9) server inner-tunnel {(9) session-state: No cached attributes(9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(9) authorize {(9) [files] = noop(9) [mschap] = noop(9) suffix: Checking for suffix after "@"(9) suffix: No '@' in User-Name = "test", looking up realm NULL(9) suffix: No such realm "NULL"(9) [suffix] = noop(9) update control {(9) Proxy-To-Realm := LOCAL(9) } # update control = noop(9) eap: Peer sent EAP Response (code 2) ID 8 length 63(9) eap: No EAP Start, assuming it's an on-going EAP conversation(9) [eap] = updated(9) [expiration] = noop(9) [logintime] = nooprlm_ldap (ldap_domain): Closing connection (2): Hit idle_timeout, was idle for 211 secondsrlm_ldap (ldap_domain): Closing connection (3): Hit idle_timeout, was idle for 211 secondsrlm_ldap (ldap_domain): Closing connection (4): Hit idle_timeout, was idle for 211 secondsrlm_ldap (ldap_domain): Closing connection (0): Hit idle_timeout, was idle for 202 secondsrlm_ldap (ldap_domain): You probably need to lower "min"rlm_ldap (ldap_domain): Closing connection (5): Hit idle_timeout, was idle for 202 secondsrlm_ldap (ldap_domain): You probably need to lower "min"rlm_ldap (ldap_domain): Closing connection (1): Hit idle_timeout, was idle for 202 secondsrlm_ldap (ldap_domain): You probably need to lower "min"rlm_ldap (ldap_domain): 0 of 0 connections in use. You may need to increase "spare"rlm_ldap (ldap_domain): Opening additional connection (6), 1 of 32 pending slots usedrlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389rlm_ldap (ldap_domain): Waiting for bind result...rlm_ldap (ldap_domain): Bind successfulrlm_ldap (ldap_domain): Reserved connection (6)(9) ldap_domain: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(9) ldap_domain: --> (sAMAccountName=test)(9) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with filter "(sAMAccountName=test)", scope "sub"(9) ldap_domain: Waiting for search result...(9) ldap_domain: User object found at DN "CN=Test TEST,CN=Users,DC=domain,DC=local"(9) ldap_domain: Processing user attributes(9) ldap_domain: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute(9) ldap_domain: WARNING: PAP authentication will NOT work with Active Directory (if that is what you were trying to configure)rlm_ldap (ldap_domain): Released connection (6)rlm_ldap (ldap_domain): Need 2 more connections to reach 10 sparesrlm_ldap (ldap_domain): Opening additional connection (7), 1 of 31 pending slots usedrlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389rlm_ldap (ldap_domain): Waiting for bind result...rlm_ldap (ldap_domain): Bind successful(9) [ldap_domain] = ok(9) if ((ok || updated) && User-Password) {(9) if ((ok || updated) && User-Password) -> FALSE(9) [pap] = noop(9) if (User-Password) {(9) if (User-Password) -> FALSE(9) } # authorize = updated(9) Found Auth-Type = EAP(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(9) authenticate {(9) eap: Expiring EAP session with state 0xbd1845cebd105fc4(9) eap: Finished EAP session with state 0xbd1845cebd105fc4(9) eap: Previous EAP request found for state 0xbd1845cebd105fc4, released from the list(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)(9) eap: Calling submodule eap_mschapv2 to process data(9) eap_mschapv2: # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(9) eap_mschapv2: Auth-Type MS-CHAP {(9) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password(9) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password(9) mschap: Creating challenge hash with username: test(9) mschap: Client is using MS-CHAPv2(9) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication(9) mschap: ERROR: MS-CHAP2-Response is incorrect(9) [mschap] = reject(9) } # Auth-Type MS-CHAP = reject(9) eap: Sending EAP Failure (code 4) ID 8 length 4(9) eap: Freeing handler(9) [eap] = reject(9) } # authenticate = reject(9) Failed to authenticate the user(9) Using Post-Auth-Type Reject(9) Post-Auth-Type sub-section not found. Ignoring.(9) } # server inner-tunnel(9) Virtual server sending reply(9) MS-CHAP-Error = "\010E=691 R=1 C=12a7b91273b8d4ea014f8d6353762c6f V=3 M=Authentication failed"(9) EAP-Message = 0x04080004(9) Message-Authenticator = 0x00000000000000000000000000000000(9) eap_peap: Got tunneled reply code 3(9) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=12a7b91273b8d4ea014f8d6353762c6f V=3 M=Authentication failed"(9) eap_peap: EAP-Message = 0x04080004(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(9) eap_peap: Got tunneled reply RADIUS code 3(9) eap_peap: MS-CHAP-Error = "\010E=691 R=1 C=12a7b91273b8d4ea014f8d6353762c6f V=3 M=Authentication failed"(9) eap_peap: EAP-Message = 0x04080004(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(9) eap_peap: Tunneled authentication was rejected(9) eap_peap: FAILURE(9) eap: Sending EAP Request (code 1) ID 9 length 43(9) eap: EAP session adding &reply:State = 0x714e61bf764778fd(9) [eap] = handled(9) } # authenticate = handled(9) Using Post-Auth-Type Challenge(9) Post-Auth-Type sub-section not found. Ignoring.(9) Sent Access-Challenge Id 14 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(9) EAP-Message = 0x0109002b19001703010020b8c28870cb31e457ad24447c2dad4915f836138d395b9e74200fe48a71906242(9) Message-Authenticator = 0x00000000000000000000000000000000(9) State = 0x714e61bf764778fd13de40933f3a43c8(9) Finished requestWaking up in 4.9 seconds.(10) Received Access-Request Id 10 from 192.168.2.250:3072 to 192.168.8.27:1812 length 230(10) User-Name = "test"(10) Service-Type = Framed-User(10) NAS-IP-Address = 192.168.2.250(10) NAS-Port = 10(10) NAS-Port-Id = "10"(10) State = 0x714e61bf764778fd13de40933f3a43c8(10) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(10) Calling-Station-Id = "B8-E8-56-41-2C-2A"(10) Connect-Info = "CONNECT 54 Mbps 802.11g"(10) NAS-Identifier = "AP-domain01"(10) NAS-Port-Type = Wireless-802.11(10) Framed-MTU = 1500(10) EAP-Message = 0x0209002b190017030100209f64c67a9a32761683b0d21eb6f28bfb8a42fa0a50d6ef3dfbf3815d7511e4a1(10) Message-Authenticator = 0x26f3267a7372bfa1b0f71a27ccba5c9f(10) session-state: No cached attributes(10) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(10) authorize {(10) [files] = noop(10) [preprocess] = ok(10) suffix: Checking for suffix after "@"(10) suffix: No '@' in User-Name = "test", looking up realm NULL(10) suffix: No such realm "NULL"(10) [suffix] = noop(10) eap: Peer sent EAP Response (code 2) ID 9 length 43(10) eap: Continuing tunnel setup(10) [eap] = ok(10) } # authorize = ok(10) Found Auth-Type = EAP(10) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(10) authenticate {(10) eap: Expiring EAP session with state 0x714e61bf764778fd(10) eap: Finished EAP session with state 0x714e61bf764778fd(10) eap: Previous EAP request found for state 0x714e61bf764778fd, released from the list(10) eap: Peer sent packet with method EAP PEAP (25)(10) eap: Calling submodule eap_peap to process data(10) eap_peap: Continuing EAP-TLS(10) eap_peap: [eaptls verify] = ok(10) eap_peap: Done initial handshake(10) eap_peap: [eaptls process] = ok(10) eap_peap: Session established. Decoding tunneled attributes(10) eap_peap: PEAP state send tlv failure(10) eap_peap: Received EAP-TLV response(10) eap_peap: The users session was previously rejected: returning reject (again.)(10) eap_peap: This means you need to read the PREVIOUS messages in the debug output(10) eap_peap: to find out the reason why the user was rejected(10) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you(10) eap_peap: what went wrong, and how to fix the problem(10) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed(10) eap: Sending EAP Failure (code 4) ID 9 length 4(10) eap: Failed in EAP select(10) [eap] = invalid(10) } # authenticate = invalid(10) Failed to authenticate the user(10) Using Post-Auth-Type Reject(10) Post-Auth-Type sub-section not found. Ignoring.(10) Delaying response for 1.000000 secondsWaking up in 0.3 seconds.Waking up in 0.6 seconds.(10) Sending delayed response(10) Sent Access-Reject Id 10 from 192.168.8.27:1812 to 192.168.2.250:3072 length 44(10) EAP-Message = 0x04090004(10) Message-Authenticator = 0x00000000000000000000000000000000Waking up in 3.9 seconds.(9) Cleaning up request packet ID 14 with timestamp +211(10) Cleaning up request packet ID 10 with timestamp +211Ready to process requests
default site:
server default {
listen {    type = auth    ipaddr = *    port = 0#   clients = per_socket_clients
    limit {        max_connections = 0        lifetime = 0        idle_timeout = 30    }}
listen {    ipaddr = *    port = 0    type = acct#   interface = eth0#   clients = per_socket_clients
    limit {        idle_timeout = 0        lifetime = 0        max_connections = 0    }}

authorize {    files    preprocess    suffix    eap {        ok = return    }    expiration    logintime
}
authenticate {    eap}
preacct {}
accounting {    detail    sql_domain}
session {    radutmp    sql_domain}
post-auth {}
pre-proxy {}
post-proxy {}}
inner-tunnel site:server inner-tunnel {
listen {    ipaddr = 127.0.0.1        port = 18120        type = auth}
authorize {    files            mschap    suffix    update control {        Proxy-To-Realm := LOCAL        }            eap {                    ok = return            }    expiration    logintime    ldap_domain    if ((ok || updated) && User-Password) {                    update {                            control:Auth-Type := ldap                    }            }    pap    if (User-Password) {            update control {            Auth-Type := ldap        }    }}
authenticate {    Auth-Type PAP {        #ldap_domain        pap    }            Auth-Type CHAP {                    chap            }            Auth-Type MS-CHAP {        mschap            }    Auth-Type LDAP {                    ldap_domain            }    ldap_domain    eap}
session {    radutmp}
post-auth {}
pre-proxy {}
post-proxy {}}
eap configuration:
eap {default_eap_type = peaptimer_expire = 60ignore_unknown_eap_types = nocisco_accounting_username_bug = nomax_sessions = ${max_requests}md5 {}
leap {}
gtc {    auth_type = PAP}
tls-config tls-common {    private_key_password = whatever    private_key_file = ${certdir}/nedeco/aaa.nedeco.local.key    certificate_file = ${certdir}/nedeco/aaa.nedeco.local.pem    ca_file = ${cadir}/nedeco/nedeco_CA.pem    dh_file = ${certdir}/dh    random_file = /dev/urandom    ca_path = ${cadir}    cipher_list = "DEFAULT"    ecdh_curve = "prime256v1"    cache {        enable = no        lifetime = 24 # hours        max_entries = 255    }
    verify {    }
    ocsp {        enable = no        override_cert_url = yes        url = "http://127.0.0.1/ocsp/"    }}
tls {    tls = tls-common}
ttls {}

peap {    tls = tls-common    default_eap_type = mschapv2    copy_request_to_tunnel = no    use_tunneled_reply = no    proxy_tunneled_request_as_eap = no    virtual_server = "inner-tunnel"}
mschapv2 {}}
the chap configuration:
chap {# no configuration}
the mschap configuration
mschap {use_mppe = yesrequire_encryption = yesrequire_strong = yeswith_ntdomain_hack = yespool {start = ${thread[pool].start_servers}min = ${thread[pool].min_spare_servers}max = ${thread[pool].max_servers}spare = ${thread[pool].max_spare_servers}uses = 0retry_delay = 30lifetime = 86400cleanup_interval = 300idle_timeout = 600}
passchange {}retry_msg = "Re-enter (or reset) the password"}
ldap configuration:
ldap ldap_domain {server = 'dc.domain.local'port = 389identity = 'cn=Administrator,cn=Users,dc=domain,dc=local'password = passwordbase_dn = 'cn=Users,dc=domain,dc=local'
sasl {    realm = 'domain.local'}

update {    control:Password-With-Header    += 'userPassword'    control:NT-Password     := 'ntPassword'    control:            += 'radiusControlAttribute'    request:            += 'radiusRequestAttribute'    reply:              += 'radiusReplyAttribute'}
edir_autz = yes
user {    base_dn = "${..base_dn}"    filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})"
    sasl {    }
    scope = 'sub'
}

group {    base_dn = "${..base_dn}"    filter = '(objectClass=posixGroup)'    membership_attribute = 'memberOf'}

profile {}

client {    base_dn = "${..base_dn}"    filter = '(objectClass=radiusClient)'    }
    attribute {        ipaddr              = 'radiusClientIdentifier'        secret              = 'radiusClientSecret'    }}

accounting {    reference = "%{tolower:type.%{Acct-Status-Type}}"
    type {        start {            update {                description := "Online at %S"            }        }
        interim-update {            update {                description := "Last seen at %S"            }        }
        stop {            update {                description := "Offline at %S"            }        }    }}

post-auth {    update {        description := "Authenticated at %S"    }}
options {    chase_referrals = yes    rebind = yes    res_timeout = 10    srv_timelimit = 3    net_timeout = 1    idle = 60    probes = 3    interval = 3    ldap_debug = 0x0028}
tls {    start_tls = yes    require_cert    = 'never'}
pool {    start = ${thread[pool].start_servers}    min = ${thread[pool].min_spare_servers}    max = ${thread[pool].max_servers}    spare = ${thread[pool].max_spare_servers}    uses = 0    retry_delay = 30    lifetime = 0    idle_timeout = 60}}
radius Version: radiusd: FreeRADIUS Version 3.0.11 (git #7a659a2), for host x86_64-unknown-linux-gnu, built on Oct 7 2015 at 15:23:07
with user bob over console:
(0) Received Access-Request Id 213 from 127.0.0.1:45282 to 127.0.0.1:18120 length 73(0) User-Name = "bob"(0) User-Password = "hello"(0) NAS-IP-Address = 192.168.8.27(0) NAS-Port = 0(0) Message-Authenticator = 0xbed4902174d4f8ff5f36492af1ae51de(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(0) authorize {(0) files: users: Matched entry bob at line 69(0) [files] = ok(0) [mschap] = noop(0) suffix: Checking for suffix after "@"(0) suffix: No '@' in User-Name = "bob", looking up realm NULL(0) suffix: No such realm "NULL"(0) [suffix] = noop(0) update control {(0) Proxy-To-Realm := LOCAL(0) } # update control = noop(0) eap: No EAP-Message, not doing EAP(0) [eap] = noop(0) [expiration] = noop(0) [logintime] = nooprlm_ldap (ldap_domain): Reserved connection (0)(0) ldap_domain: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(0) ldap_domain: --> (sAMAccountName=bob)(0) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with filter "(sAMAccountName=bob)", scope "sub"(0) ldap_domain: Waiting for search result...(0) ldap_domain: Search returned no resultsrlm_ldap (ldap_domain): Released connection (0)rlm_ldap (ldap_domain): Need 5 more connections to reach 10 sparesrlm_ldap (ldap_domain): Opening additional connection (5), 1 of 27 pending slots usedrlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389rlm_ldap (ldap_domain): Waiting for bind result...rlm_ldap (ldap_domain): Bind successful(0) [ldap_domain] = notfound(0) if ((ok || updated) && User-Password) {(0) if ((ok || updated) && User-Password) -> FALSE(0) [pap] = updated(0) if (User-Password) {(0) if (User-Password) -> TRUE(0) if (User-Password) {(0) update control {(0) Auth-Type := LDAP(0) } # update control = noop(0) } # if (User-Password) = noop(0) } # authorize = updated(0) Found Auth-Type = LDAP(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(0) Auth-Type LDAP {rlm_ldap (ldap_domain): Reserved connection (1)(0) ldap_domain: Login attempt by "bob"(0) ldap_domain: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(0) ldap_domain: --> (sAMAccountName=bob)(0) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with filter "(sAMAccountName=bob)", scope "sub"(0) ldap_domain: Waiting for search result...(0) ldap_domain: Search returned no resultsrlm_ldap (ldap_domain): Released connection (1)(0) [ldap_domain] = notfound(0) } # Auth-Type LDAP = notfound(0) Failed to authenticate the user(0) Using Post-Auth-Type Reject(0) Post-Auth-Type sub-section not found. Ignoring.(0) Delaying response for 1.000000 secondsWaking up in 0.3 seconds.Waking up in 0.6 seconds.(0) Sending delayed response(0) Sent Access-Reject Id 213 from 127.0.0.1:18120 to 127.0.0.1:45282 length 20Waking up in 3.9 seconds.(0) Cleaning up request packet ID 213 with timestamp +5Ready to process requests
with user bob over AccessPoint:
(1) Received Access-Request Id 155 from 192.168.2.250:3072 to 192.168.8.27:1812 length 176(1) User-Name = "bob"(1) Service-Type = Framed-User(1) NAS-IP-Address = 192.168.2.250(1) NAS-Port = 10(1) NAS-Port-Id = "10"(1) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(1) Calling-Station-Id = "B8-E8-56-41-2C-2A"(1) Connect-Info = "CONNECT 54 Mbps 802.11g"(1) NAS-Identifier = "AP-domain01"(1) NAS-Port-Type = Wireless-802.11(1) Framed-MTU = 1500(1) EAP-Message = 0x0201000801626f62(1) Message-Authenticator = 0x4680895a204b3df7d15d82558ff9e6ea(1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(1) authorize {(1) files: users: Matched entry bob at line 69(1) [files] = ok(1) [preprocess] = ok(1) suffix: Checking for suffix after "@"(1) suffix: No '@' in User-Name = "bob", looking up realm NULL(1) suffix: No such realm "NULL"(1) [suffix] = noop(1) eap: Peer sent EAP Response (code 2) ID 1 length 8(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(1) [eap] = ok(1) } # authorize = ok(1) Found Auth-Type = EAP(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(1) authenticate {(1) eap: Peer sent packet with method EAP Identity (1)(1) eap: Calling submodule eap_peap to process data(1) eap_peap: Initiating new EAP-TLS session(1) eap_peap: [eaptls start] = request(1) eap: Sending EAP Request (code 1) ID 2 length 6(1) eap: EAP session adding &reply:State = 0x7322fa167320e364(1) [eap] = handled(1) } # authenticate = handled(1) Using Post-Auth-Type Challenge(1) Post-Auth-Type sub-section not found. Ignoring.(1) Sent Access-Challenge Id 155 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(1) EAP-Message = 0x010200061920(1) Message-Authenticator = 0x00000000000000000000000000000000(1) State = 0x7322fa167320e3641bb25e163c98a49d(1) Finished requestWaking up in 4.9 seconds.(2) Received Access-Request Id 219 from 192.168.2.250:3072 to 192.168.8.27:1812 length 338(2) User-Name = "bob"(2) Service-Type = Framed-User(2) NAS-IP-Address = 192.168.2.250(2) NAS-Port = 10(2) NAS-Port-Id = "10"(2) State = 0x7322fa167320e3641bb25e163c98a49d(2) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(2) Calling-Station-Id = "B8-E8-56-41-2C-2A"(2) Connect-Info = "CONNECT 54 Mbps 802.11g"(2) NAS-Identifier = "AP-domain01"(2) NAS-Port-Type = Wireless-802.11(2) Framed-MTU = 1500(2) EAP-Message = 0x0202009819800000008e1603010089010000850301561634f097408b8f9058fa38f1f34ce4854696e71aebecb3ae3cd9850b14d4cc00004a00ffc024c023c00ac009c008c028c027c014c013c012c026c025c005c004c003c02ac029c00fc00ec00d006b0067003900330016003d003c0035002f000ac0(2) Message-Authenticator = 0x5309b752e9ed063e669ba97b7c937db8(2) session-state: No cached attributes(2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(2) authorize {(2) files: users: Matched entry bob at line 69(2) [files] = ok(2) [preprocess] = ok(2) suffix: Checking for suffix after "@"(2) suffix: No '@' in User-Name = "bob", looking up realm NULL(2) suffix: No such realm "NULL"(2) [suffix] = noop(2) eap: Peer sent EAP Response (code 2) ID 2 length 152(2) eap: Continuing tunnel setup(2) [eap] = ok(2) } # authorize = ok(2) Found Auth-Type = EAP(2) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(2) authenticate {(2) eap: Expiring EAP session with state 0x7322fa167320e364(2) eap: Finished EAP session with state 0x7322fa167320e364(2) eap: Previous EAP request found for state 0x7322fa167320e364, released from the list(2) eap: Peer sent packet with method EAP PEAP (25)(2) eap: Calling submodule eap_peap to process data(2) eap_peap: Continuing EAP-TLS(2) eap_peap: Peer indicated complete TLS record size will be 142 bytes(2) eap_peap: Got complete TLS record (142 bytes)(2) eap_peap: [eaptls verify] = length included(2) eap_peap: (other): before/accept initialization(2) eap_peap: TLS_accept: before/accept initialization(2) eap_peap: <<< TLS 1.0 Handshake [length 0089], ClientHello(2) eap_peap: TLS_accept: SSLv3 read client hello A(2) eap_peap: >>> TLS 1.0 Handshake [length 0039], ServerHello(2) eap_peap: TLS_accept: SSLv3 write server hello A(2) eap_peap: >>> TLS 1.0 Handshake [length 0964], Certificate(2) eap_peap: TLS_accept: SSLv3 write certificate A(2) eap_peap: >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange(2) eap_peap: TLS_accept: SSLv3 write key exchange A(2) eap_peap: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone(2) eap_peap: TLS_accept: SSLv3 write server done A(2) eap_peap: TLS_accept: SSLv3 flush data(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client certificate A(2) eap_peap: In SSL Handshake Phase(2) eap_peap: In SSL Accept mode(2) eap_peap: [eaptls process] = handled(2) eap: Sending EAP Request (code 1) ID 3 length 1004(2) eap: EAP session adding &reply:State = 0x7322fa167221e364(2) [eap] = handled(2) } # authenticate = handled(2) Using Post-Auth-Type Challenge(2) Post-Auth-Type sub-section not found. Ignoring.(2) Sent Access-Challenge Id 219 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(2) EAP-Message = 0x010303ec19c000000b001603010039020000350301da2dfe903d7c37a7634c8742deb0c9de5ef2b5d7f4c0d4d8d1697deec243cc5600c01400000dff01000100000b00040300010216030109640b00096000095d0005a7308205a33082048ba0030201020213720000003379461d9f383b20c900010000(2) Message-Authenticator = 0x00000000000000000000000000000000(2) State = 0x7322fa167221e3641bb25e163c98a49d(2) Finished requestWaking up in 4.9 seconds.(1) Cleaning up request packet ID 155 with timestamp +61(2) Cleaning up request packet ID 219 with timestamp +61Ready to process requests(3) Received Access-Request Id 54 from 192.168.2.250:3072 to 192.168.8.27:1812 length 192(3) User-Name = "bob"(3) Service-Type = Framed-User(3) NAS-IP-Address = 192.168.2.250(3) NAS-Port = 10(3) NAS-Port-Id = "10"(3) State = 0x7322fa167221e3641bb25e163c98a49d(3) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(3) Calling-Station-Id = "B8-E8-56-41-2C-2A"(3) Connect-Info = "CONNECT 54 Mbps 802.11g"(3) NAS-Identifier = "AP-domain01"(3) NAS-Port-Type = Wireless-802.11(3) Framed-MTU = 1500(3) EAP-Message = 0x020300061900(3) Message-Authenticator = 0xa70b8b8371dc21e4a3352e99bad8a487(3) session-state: No cached attributes(3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(3) authorize {(3) files: users: Matched entry bob at line 69(3) [files] = ok(3) [preprocess] = ok(3) suffix: Checking for suffix after "@"(3) suffix: No '@' in User-Name = "bob", looking up realm NULL(3) suffix: No such realm "NULL"(3) [suffix] = noop(3) eap: Peer sent EAP Response (code 2) ID 3 length 6(3) eap: Continuing tunnel setup(3) [eap] = ok(3) } # authorize = ok(3) Found Auth-Type = EAP(3) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(3) authenticate {(3) eap: Expiring EAP session with state 0x7322fa167221e364(3) eap: Finished EAP session with state 0x7322fa167221e364(3) eap: Previous EAP request found for state 0x7322fa167221e364, released from the list(3) eap: Peer sent packet with method EAP PEAP (25)(3) eap: Calling submodule eap_peap to process data(3) eap_peap: Continuing EAP-TLS(3) eap_peap: Peer ACKed our handshake fragment(3) eap_peap: [eaptls verify] = request(3) eap_peap: [eaptls process] = handled(3) eap: Sending EAP Request (code 1) ID 4 length 1000(3) eap: EAP session adding &reply:State = 0x7322fa167126e364(3) [eap] = handled(3) } # authenticate = handled(3) Using Post-Auth-Type Challenge(3) Post-Auth-Type sub-section not found. Ignoring.(3) Sent Access-Challenge Id 54 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(3) EAP-Message = 0x010403e81940b53081b206082b060105050730028681a56c6461703a2f2f2f434e3d6e656465636f253230476d624825323043412c434e3d4149412c434e3d5075626c69632532304b657925323053657276696365732c434e3d53657276696365732c434e3d436f6e66696775726174696f6e2c44433d(3) Message-Authenticator = 0x00000000000000000000000000000000(3) State = 0x7322fa167126e3641bb25e163c98a49d(3) Finished requestWaking up in 4.9 seconds.(4) Received Access-Request Id 29 from 192.168.2.250:3072 to 192.168.8.27:1812 length 192(4) User-Name = "bob"(4) Service-Type = Framed-User(4) NAS-IP-Address = 192.168.2.250(4) NAS-Port = 10(4) NAS-Port-Id = "10"(4) State = 0x7322fa167126e3641bb25e163c98a49d(4) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(4) Calling-Station-Id = "B8-E8-56-41-2C-2A"(4) Connect-Info = "CONNECT 54 Mbps 802.11g"(4) NAS-Identifier = "AP-domain01"(4) NAS-Port-Type = Wireless-802.11(4) Framed-MTU = 1500(4) EAP-Message = 0x020400061900(4) Message-Authenticator = 0x841ce2c1c9b797b25c3aff5bba5e059d(4) session-state: No cached attributes(4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(4) authorize {(4) files: users: Matched entry bob at line 69(4) [files] = ok(4) [preprocess] = ok(4) suffix: Checking for suffix after "@"(4) suffix: No '@' in User-Name = "bob", looking up realm NULL(4) suffix: No such realm "NULL"(4) [suffix] = noop(4) eap: Peer sent EAP Response (code 2) ID 4 length 6(4) eap: Continuing tunnel setup(4) [eap] = ok(4) } # authorize = ok(4) Found Auth-Type = EAP(4) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(4) authenticate {(4) eap: Expiring EAP session with state 0x7322fa167126e364(4) eap: Finished EAP session with state 0x7322fa167126e364(4) eap: Previous EAP request found for state 0x7322fa167126e364, released from the list(4) eap: Peer sent packet with method EAP PEAP (25)(4) eap: Calling submodule eap_peap to process data(4) eap_peap: Continuing EAP-TLS(4) eap_peap: Peer ACKed our handshake fragment(4) eap_peap: [eaptls verify] = request(4) eap_peap: [eaptls process] = handled(4) eap: Sending EAP Request (code 1) ID 5 length 834(4) eap: EAP session adding &reply:State = 0x7322fa167027e364(4) [eap] = handled(4) } # authenticate = handled(4) Using Post-Auth-Type Challenge(4) Post-Auth-Type sub-section not found. Ignoring.(4) Sent Access-Challenge Id 29 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(4) EAP-Message = 0x01050342190068d99b627f3ca6561e6c1dcd0e8bb529b85d2515a36c2ba6f906ee9a223e619decfff2f24ef8674307735d591964d50ac988776a55970203010001a3819130818e301306092b060104018237140204061e0400430041300e0603551d0f0101ff040403020186300f0603551d130101ff04(4) Message-Authenticator = 0x00000000000000000000000000000000(4) State = 0x7322fa167027e3641bb25e163c98a49d(4) Finished requestWaking up in 4.9 seconds.(5) Received Access-Request Id 215 from 192.168.2.250:3072 to 192.168.8.27:1812 length 330(5) User-Name = "bob"(5) Service-Type = Framed-User(5) NAS-IP-Address = 192.168.2.250(5) NAS-Port = 10(5) NAS-Port-Id = "10"(5) State = 0x7322fa167027e3641bb25e163c98a49d(5) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(5) Calling-Station-Id = "B8-E8-56-41-2C-2A"(5) Connect-Info = "CONNECT 54 Mbps 802.11g"(5) NAS-Identifier = "AP-domain01"(5) NAS-Port-Type = Wireless-802.11(5) Framed-MTU = 1500(5) EAP-Message = 0x0205009019800000008616030100461000004241048075a5ca05d012d0fd77b0f9e1664c5ce577eda72a1368e0a8e78fd9072b0a6e04ce9f7f3cb1339ca9fd58bdc40e0afce833807f1c4035e532e91d07e8d45fdb1403010001011603010030bff39ef9cf9a0400269ae5fd8888ba5c4940b72599bca5(5) Message-Authenticator = 0xfaa49416d762fdf0846428951f176829(5) session-state: No cached attributes(5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(5) authorize {(5) files: users: Matched entry bob at line 69(5) [files] = ok(5) [preprocess] = ok(5) suffix: Checking for suffix after "@"(5) suffix: No '@' in User-Name = "bob", looking up realm NULL(5) suffix: No such realm "NULL"(5) [suffix] = noop(5) eap: Peer sent EAP Response (code 2) ID 5 length 144(5) eap: Continuing tunnel setup(5) [eap] = ok(5) } # authorize = ok(5) Found Auth-Type = EAP(5) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(5) authenticate {(5) eap: Expiring EAP session with state 0x7322fa167027e364(5) eap: Finished EAP session with state 0x7322fa167027e364(5) eap: Previous EAP request found for state 0x7322fa167027e364, released from the list(5) eap: Peer sent packet with method EAP PEAP (25)(5) eap: Calling submodule eap_peap to process data(5) eap_peap: Continuing EAP-TLS(5) eap_peap: Peer indicated complete TLS record size will be 134 bytes(5) eap_peap: Got complete TLS record (134 bytes)(5) eap_peap: [eaptls verify] = length included(5) eap_peap: <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange(5) eap_peap: TLS_accept: SSLv3 read client key exchange A(5) eap_peap: <<< TLS 1.0 ChangeCipherSpec length 0001 eap_peap: <<< TLS 1.0 Handshake [length 0010], Finished(5) eap_peap: TLS_accept: SSLv3 read finished A(5) eap_peap: >>> TLS 1.0 ChangeCipherSpec length 0001 eap_peap: TLS_accept: SSLv3 write change cipher spec A(5) eap_peap: >>> TLS 1.0 Handshake [length 0010], Finished(5) eap_peap: TLS_accept: SSLv3 write finished A(5) eap_peap: TLS_accept: SSLv3 flush data(5) eap_peap: (other): SSL negotiation finished successfully(5) eap_peap: SSL Connection Established(5) eap_peap: [eaptls process] = handled(5) eap: Sending EAP Request (code 1) ID 6 length 65(5) eap: EAP session adding &reply:State = 0x7322fa167724e364(5) [eap] = handled(5) } # authenticate = handled(5) Using Post-Auth-Type Challenge(5) Post-Auth-Type sub-section not found. Ignoring.(5) Sent Access-Challenge Id 215 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(5) EAP-Message = 0x010600411900140301000101160301003055bf61e75ec8b42df54cc0a1eab6dd5e274dd8db872c3a18e2616a373eda384dcffbfa8de45423ccb8890ee689f1f4cb(5) Message-Authenticator = 0x00000000000000000000000000000000(5) State = 0x7322fa167724e3641bb25e163c98a49d(5) Finished requestWaking up in 4.8 seconds.(6) Received Access-Request Id 116 from 192.168.2.250:3072 to 192.168.8.27:1812 length 192(6) User-Name = "bob"(6) Service-Type = Framed-User(6) NAS-IP-Address = 192.168.2.250(6) NAS-Port = 10(6) NAS-Port-Id = "10"(6) State = 0x7322fa167724e3641bb25e163c98a49d(6) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(6) Calling-Station-Id = "B8-E8-56-41-2C-2A"(6) Connect-Info = "CONNECT 54 Mbps 802.11g"(6) NAS-Identifier = "AP-domain01"(6) NAS-Port-Type = Wireless-802.11(6) Framed-MTU = 1500(6) EAP-Message = 0x020600061900(6) Message-Authenticator = 0xb468a031e9e011addea02301e58313cb(6) session-state: No cached attributes(6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(6) authorize {(6) files: users: Matched entry bob at line 69(6) [files] = ok(6) [preprocess] = ok(6) suffix: Checking for suffix after "@"(6) suffix: No '@' in User-Name = "bob", looking up realm NULL(6) suffix: No such realm "NULL"(6) [suffix] = noop(6) eap: Peer sent EAP Response (code 2) ID 6 length 6(6) eap: Continuing tunnel setup(6) [eap] = ok(6) } # authorize = ok(6) Found Auth-Type = EAP(6) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(6) authenticate {(6) eap: Expiring EAP session with state 0x7322fa167724e364(6) eap: Finished EAP session with state 0x7322fa167724e364(6) eap: Previous EAP request found for state 0x7322fa167724e364, released from the list(6) eap: Peer sent packet with method EAP PEAP (25)(6) eap: Calling submodule eap_peap to process data(6) eap_peap: Continuing EAP-TLS(6) eap_peap: Peer ACKed our handshake fragment. handshake is finished(6) eap_peap: [eaptls verify] = success(6) eap_peap: [eaptls process] = success(6) eap_peap: Session established. Decoding tunneled attributes(6) eap_peap: PEAP state TUNNEL ESTABLISHED(6) eap: Sending EAP Request (code 1) ID 7 length 43(6) eap: EAP session adding &reply:State = 0x7322fa167625e364(6) [eap] = handled(6) } # authenticate = handled(6) Using Post-Auth-Type Challenge(6) Post-Auth-Type sub-section not found. Ignoring.(6) Sent Access-Challenge Id 116 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(6) EAP-Message = 0x0107002b19001703010020ba0b3d2b7d949cf1727c708a6c6ac8606201ef325b4408284fbf4115ccf1e60c(6) Message-Authenticator = 0x00000000000000000000000000000000(6) State = 0x7322fa167625e3641bb25e163c98a49d(6) Finished requestWaking up in 4.8 seconds.(7) Received Access-Request Id 108 from 192.168.2.250:3072 to 192.168.8.27:1812 length 229(7) User-Name = "bob"(7) Service-Type = Framed-User(7) NAS-IP-Address = 192.168.2.250(7) NAS-Port = 10(7) NAS-Port-Id = "10"(7) State = 0x7322fa167625e3641bb25e163c98a49d(7) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(7) Calling-Station-Id = "B8-E8-56-41-2C-2A"(7) Connect-Info = "CONNECT 54 Mbps 802.11g"(7) NAS-Identifier = "AP-domain01"(7) NAS-Port-Type = Wireless-802.11(7) Framed-MTU = 1500(7) EAP-Message = 0x0207002b190017030100205db45e564856f45f7af7cc0f3ec2e54ef3aab9a99f6cb2d9944b2c53980f0bde(7) Message-Authenticator = 0xd2092e590023b1e9af89a2d5f9927801(7) session-state: No cached attributes(7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(7) authorize {(7) files: users: Matched entry bob at line 69(7) [files] = ok(7) [preprocess] = ok(7) suffix: Checking for suffix after "@"(7) suffix: No '@' in User-Name = "bob", looking up realm NULL(7) suffix: No such realm "NULL"(7) [suffix] = noop(7) eap: Peer sent EAP Response (code 2) ID 7 length 43(7) eap: Continuing tunnel setup(7) [eap] = ok(7) } # authorize = ok(7) Found Auth-Type = EAP(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(7) authenticate {(7) eap: Expiring EAP session with state 0x7322fa167625e364(7) eap: Finished EAP session with state 0x7322fa167625e364(7) eap: Previous EAP request found for state 0x7322fa167625e364, released from the list(7) eap: Peer sent packet with method EAP PEAP (25)(7) eap: Calling submodule eap_peap to process data(7) eap_peap: Continuing EAP-TLS(7) eap_peap: [eaptls verify] = ok(7) eap_peap: Done initial handshake(7) eap_peap: [eaptls process] = ok(7) eap_peap: Session established. Decoding tunneled attributes(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY(7) eap_peap: Identity - bob(7) eap_peap: Got inner identity 'bob'(7) eap_peap: Setting default EAP type for tunneled EAP session(7) eap_peap: Got tunneled request(7) eap_peap: EAP-Message = 0x0207000801626f62(7) eap_peap: Setting User-Name to bob(7) eap_peap: Sending tunneled request to inner-tunnel(7) eap_peap: EAP-Message = 0x0207000801626f62(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1(7) eap_peap: User-Name = "bob"(7) Virtual server inner-tunnel received request(7) EAP-Message = 0x0207000801626f62(7) FreeRADIUS-Proxied-To = 127.0.0.1(7) User-Name = "bob"(7) server inner-tunnel {(7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(7) authorize {(7) files: users: Matched entry bob at line 69(7) [files] = ok(7) [mschap] = noop(7) suffix: Checking for suffix after "@"(7) suffix: No '@' in User-Name = "bob", looking up realm NULL(7) suffix: No such realm "NULL"(7) [suffix] = noop(7) update control {(7) Proxy-To-Realm := LOCAL(7) } # update control = noop(7) eap: Peer sent EAP Response (code 2) ID 7 length 8(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize(7) [eap] = ok(7) } # authorize = ok(7) Found Auth-Type = EAP(7) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(7) authenticate {(7) eap: Peer sent packet with method EAP Identity (1)(7) eap: Calling submodule eap_mschapv2 to process data(7) eap_mschapv2: Issuing Challenge(7) eap: Sending EAP Request (code 1) ID 8 length 43(7) eap: EAP session adding &reply:State = 0xa0773c37a07f2697(7) [eap] = handled(7) } # authenticate = handled(7) } # server inner-tunnel(7) Virtual server sending reply(7) EAP-Message = 0x0108002b1a0108002610499c5c634fd1c53afcf63e2a20dc0dbd667265657261646975732d332e302e3131(7) Message-Authenticator = 0x00000000000000000000000000000000(7) State = 0xa0773c37a07f269794c91e639bc0d99c(7) eap_peap: Got tunneled reply code 11(7) eap_peap: EAP-Message = 0x0108002b1a0108002610499c5c634fd1c53afcf63e2a20dc0dbd667265657261646975732d332e302e3131(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(7) eap_peap: State = 0xa0773c37a07f269794c91e639bc0d99c(7) eap_peap: Got tunneled reply RADIUS code 11(7) eap_peap: EAP-Message = 0x0108002b1a0108002610499c5c634fd1c53afcf63e2a20dc0dbd667265657261646975732d332e302e3131(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(7) eap_peap: State = 0xa0773c37a07f269794c91e639bc0d99c(7) eap_peap: Got tunneled Access-Challenge(7) eap: Sending EAP Request (code 1) ID 8 length 75(7) eap: EAP session adding &reply:State = 0x7322fa16752ae364(7) [eap] = handled(7) } # authenticate = handled(7) Using Post-Auth-Type Challenge(7) Post-Auth-Type sub-section not found. Ignoring.(7) Sent Access-Challenge Id 108 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(7) EAP-Message = 0x0108004b19001703010040d8e4f8be725dc18720efdaf547282b5b876c26c5fdbea8c05f380bf87ea452cdf6938d2793528a14f784d70ad64f66ebcb6998cae0cdb2ec340b208caf7adddc(7) Message-Authenticator = 0x00000000000000000000000000000000(7) State = 0x7322fa16752ae3641bb25e163c98a49d(7) Finished requestWaking up in 4.8 seconds.(8) Received Access-Request Id 50 from 192.168.2.250:3072 to 192.168.8.27:1812 length 277(8) User-Name = "bob"(8) Service-Type = Framed-User(8) NAS-IP-Address = 192.168.2.250(8) NAS-Port = 10(8) NAS-Port-Id = "10"(8) State = 0x7322fa16752ae3641bb25e163c98a49d(8) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(8) Calling-Station-Id = "B8-E8-56-41-2C-2A"(8) Connect-Info = "CONNECT 54 Mbps 802.11g"(8) NAS-Identifier = "AP-domain01"(8) NAS-Port-Type = Wireless-802.11(8) Framed-MTU = 1500(8) EAP-Message = 0x0208005b1900170301005035d828d77a9cd3611fc5b79937ff5a2749a2d013a332137a52fe3a206717cde550258b9914956f0b2f88dd7f4491d6d52e7b97a1fd99e59010b7e346d7692d768748d8d8efb3995a7d8d58863b0e3c9f(8) Message-Authenticator = 0x27a3860baf38d3fd1d0e7f85c85a398e(8) session-state: No cached attributes(8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(8) authorize {(8) files: users: Matched entry bob at line 69(8) [files] = ok(8) [preprocess] = ok(8) suffix: Checking for suffix after "@"(8) suffix: No '@' in User-Name = "bob", looking up realm NULL(8) suffix: No such realm "NULL"(8) [suffix] = noop(8) eap: Peer sent EAP Response (code 2) ID 8 length 91(8) eap: Continuing tunnel setup(8) [eap] = ok(8) } # authorize = ok(8) Found Auth-Type = EAP(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(8) authenticate {(8) eap: Expiring EAP session with state 0xa0773c37a07f2697(8) eap: Finished EAP session with state 0x7322fa16752ae364(8) eap: Previous EAP request found for state 0x7322fa16752ae364, released from the list(8) eap: Peer sent packet with method EAP PEAP (25)(8) eap: Calling submodule eap_peap to process data(8) eap_peap: Continuing EAP-TLS(8) eap_peap: [eaptls verify] = ok(8) eap_peap: Done initial handshake(8) eap_peap: [eaptls process] = ok(8) eap_peap: Session established. Decoding tunneled attributes(8) eap_peap: PEAP state phase2(8) eap_peap: EAP method MSCHAPv2 (26)(8) eap_peap: Got tunneled request(8) eap_peap: EAP-Message = 0x0208003e1a02080039318c4c5187cb6d3acc25374e1a666c6ebd00000000000000005c626c4605277cd81e771f53707290714956dfed703aa31a00626f62(8) eap_peap: Setting User-Name to bob(8) eap_peap: Sending tunneled request to inner-tunnel(8) eap_peap: EAP-Message = 0x0208003e1a02080039318c4c5187cb6d3acc25374e1a666c6ebd00000000000000005c626c4605277cd81e771f53707290714956dfed703aa31a00626f62(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1(8) eap_peap: User-Name = "bob"(8) eap_peap: State = 0xa0773c37a07f269794c91e639bc0d99c(8) Virtual server inner-tunnel received request(8) EAP-Message = 0x0208003e1a02080039318c4c5187cb6d3acc25374e1a666c6ebd00000000000000005c626c4605277cd81e771f53707290714956dfed703aa31a00626f62(8) FreeRADIUS-Proxied-To = 127.0.0.1(8) User-Name = "bob"(8) State = 0xa0773c37a07f269794c91e639bc0d99c(8) server inner-tunnel {(8) session-state: No cached attributes(8) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(8) authorize {(8) files: users: Matched entry bob at line 69(8) [files] = ok(8) [mschap] = noop(8) suffix: Checking for suffix after "@"(8) suffix: No '@' in User-Name = "bob", looking up realm NULL(8) suffix: No such realm "NULL"(8) [suffix] = noop(8) update control {(8) Proxy-To-Realm := LOCAL(8) } # update control = noop(8) eap: Peer sent EAP Response (code 2) ID 8 length 62(8) eap: No EAP Start, assuming it's an on-going EAP conversation(8) [eap] = updated(8) [expiration] = noop(8) [logintime] = nooprlm_ldap (ldap_domain): Closing connection (2): Hit idle_timeout, was idle for 90 secondsrlm_ldap (ldap_domain): Closing connection (3): Hit idle_timeout, was idle for 90 secondsrlm_ldap (ldap_domain): Closing connection (4): Hit idle_timeout, was idle for 90 secondsrlm_ldap (ldap_domain): Closing connection (0): Hit idle_timeout, was idle for 85 secondsrlm_ldap (ldap_domain): You probably need to lower "min"rlm_ldap (ldap_domain): Closing connection (5): Hit idle_timeout, was idle for 85 secondsrlm_ldap (ldap_domain): You probably need to lower "min"rlm_ldap (ldap_domain): Closing connection (1): Hit idle_timeout, was idle for 85 secondsrlm_ldap (ldap_domain): You probably need to lower "min"rlm_ldap (ldap_domain): 0 of 0 connections in use. You may need to increase "spare"rlm_ldap (ldap_domain): Opening additional connection (6), 1 of 32 pending slots usedrlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389rlm_ldap (ldap_domain): Waiting for bind result...rlm_ldap (ldap_domain): Bind successfulrlm_ldap (ldap_domain): Reserved connection (6)(8) ldap_domain: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(8) ldap_domain: --> (sAMAccountName=bob)(8) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with filter "(sAMAccountName=bob)", scope "sub"(8) ldap_domain: Waiting for search result...(8) ldap_domain: Search returned no resultsrlm_ldap (ldap_domain): Released connection (6)rlm_ldap (ldap_domain): Need 2 more connections to reach 10 sparesrlm_ldap (ldap_domain): Opening additional connection (7), 1 of 31 pending slots usedrlm_ldap (ldap_domain): Connecting to ldap://dc.domain.local:389rlm_ldap (ldap_domain): Waiting for bind result...rlm_ldap (ldap_domain): Bind successful(8) [ldap_domain] = notfound(8) if ((ok || updated) && User-Password) {(8) if ((ok || updated) && User-Password) -> FALSE(8) pap: WARNING: Auth-Type already set. Not setting to PAP(8) [pap] = noop(8) if (User-Password) {(8) if (User-Password) -> FALSE(8) } # authorize = updated(8) Found Auth-Type = EAP(8) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(8) authenticate {(8) eap: Expiring EAP session with state 0xa0773c37a07f2697(8) eap: Finished EAP session with state 0xa0773c37a07f2697(8) eap: Previous EAP request found for state 0xa0773c37a07f2697, released from the list(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)(8) eap: Calling submodule eap_mschapv2 to process data(8) eap_mschapv2: # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(8) eap_mschapv2: Auth-Type MS-CHAP {(8) mschap: Found Cleartext-Password, hashing to create NT-Password(8) mschap: Found Cleartext-Password, hashing to create LM-Password(8) mschap: Creating challenge hash with username: bob(8) mschap: Client is using MS-CHAPv2(8) mschap: Adding MS-CHAPv2 MPPE keys(8) [mschap] = ok(8) } # Auth-Type MS-CHAP = ok(8) MSCHAP Success(8) eap: Sending EAP Request (code 1) ID 9 length 51(8) eap: EAP session adding &reply:State = 0xa0773c37a17e2697(8) [eap] = handled(8) } # authenticate = handled(8) } # server inner-tunnel(8) Virtual server sending reply(8) EAP-Message = 0x010900331a0308002e533d41303037313532323444323837324439434432334437363345354535313444393146323441424646(8) Message-Authenticator = 0x00000000000000000000000000000000(8) State = 0xa0773c37a17e269794c91e639bc0d99c(8) eap_peap: Got tunneled reply code 11(8) eap_peap: EAP-Message = 0x010900331a0308002e533d41303037313532323444323837324439434432334437363345354535313444393146323441424646(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(8) eap_peap: State = 0xa0773c37a17e269794c91e639bc0d99c(8) eap_peap: Got tunneled reply RADIUS code 11(8) eap_peap: EAP-Message = 0x010900331a0308002e533d41303037313532323444323837324439434432334437363345354535313444393146323441424646(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(8) eap_peap: State = 0xa0773c37a17e269794c91e639bc0d99c(8) eap_peap: Got tunneled Access-Challenge(8) eap: Sending EAP Request (code 1) ID 9 length 91(8) eap: EAP session adding &reply:State = 0x7322fa16742be364(8) [eap] = handled(8) } # authenticate = handled(8) Using Post-Auth-Type Challenge(8) Post-Auth-Type sub-section not found. Ignoring.(8) Sent Access-Challenge Id 50 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(8) EAP-Message = 0x0109005b19001703010050859ea345fa5ac6b144a9e42ed8bff28f0b2320a237ac8370d029cb70f52d482a0d76da88b813e4df36252cb6397300ec8d8d78b8622e934b5283b40ee5a8abe75b64b6667666fd21f0cac5fcc60f98ed(8) Message-Authenticator = 0x00000000000000000000000000000000(8) State = 0x7322fa16742be3641bb25e163c98a49d(8) Finished requestWaking up in 4.7 seconds.(9) Received Access-Request Id 168 from 192.168.2.250:3072 to 192.168.8.27:1812 length 229(9) User-Name = "bob"(9) Service-Type = Framed-User(9) NAS-IP-Address = 192.168.2.250(9) NAS-Port = 10(9) NAS-Port-Id = "10"(9) State = 0x7322fa16742be3641bb25e163c98a49d(9) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(9) Calling-Station-Id = "B8-E8-56-41-2C-2A"(9) Connect-Info = "CONNECT 54 Mbps 802.11g"(9) NAS-Identifier = "AP-domain01"(9) NAS-Port-Type = Wireless-802.11(9) Framed-MTU = 1500(9) EAP-Message = 0x0209002b19001703010020ef0b01a2e1a2ce59b84fcd3a36f6101ad280a2da6de9e3034ee1142fd2c2d87b(9) Message-Authenticator = 0xcbef8a5238f2450a86714781617cb91e(9) session-state: No cached attributes(9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(9) authorize {(9) files: users: Matched entry bob at line 69(9) [files] = ok(9) [preprocess] = ok(9) suffix: Checking for suffix after "@"(9) suffix: No '@' in User-Name = "bob", looking up realm NULL(9) suffix: No such realm "NULL"(9) [suffix] = noop(9) eap: Peer sent EAP Response (code 2) ID 9 length 43(9) eap: Continuing tunnel setup(9) [eap] = ok(9) } # authorize = ok(9) Found Auth-Type = EAP(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(9) authenticate {(9) eap: Expiring EAP session with state 0xa0773c37a17e2697(9) eap: Finished EAP session with state 0x7322fa16742be364(9) eap: Previous EAP request found for state 0x7322fa16742be364, released from the list(9) eap: Peer sent packet with method EAP PEAP (25)(9) eap: Calling submodule eap_peap to process data(9) eap_peap: Continuing EAP-TLS(9) eap_peap: [eaptls verify] = ok(9) eap_peap: Done initial handshake(9) eap_peap: [eaptls process] = ok(9) eap_peap: Session established. Decoding tunneled attributes(9) eap_peap: PEAP state phase2(9) eap_peap: EAP method MSCHAPv2 (26)(9) eap_peap: Got tunneled request(9) eap_peap: EAP-Message = 0x020900061a03(9) eap_peap: Setting User-Name to bob(9) eap_peap: Sending tunneled request to inner-tunnel(9) eap_peap: EAP-Message = 0x020900061a03(9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1(9) eap_peap: User-Name = "bob"(9) eap_peap: State = 0xa0773c37a17e269794c91e639bc0d99c(9) Virtual server inner-tunnel received request(9) EAP-Message = 0x020900061a03(9) FreeRADIUS-Proxied-To = 127.0.0.1(9) User-Name = "bob"(9) State = 0xa0773c37a17e269794c91e639bc0d99c(9) server inner-tunnel {(9) session-state: No cached attributes(9) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(9) authorize {(9) files: users: Matched entry bob at line 69(9) [files] = ok(9) [mschap] = noop(9) suffix: Checking for suffix after "@"(9) suffix: No '@' in User-Name = "bob", looking up realm NULL(9) suffix: No such realm "NULL"(9) [suffix] = noop(9) update control {(9) Proxy-To-Realm := LOCAL(9) } # update control = noop(9) eap: Peer sent EAP Response (code 2) ID 9 length 6(9) eap: No EAP Start, assuming it's an on-going EAP conversation(9) [eap] = updated(9) [expiration] = noop(9) [logintime] = nooprlm_ldap (ldap_domain): Reserved connection (6)(9) ldap_domain: EXPAND (sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})(9) ldap_domain: --> (sAMAccountName=bob)(9) ldap_domain: Performing search in "cn=Users,dc=domain,dc=local" with filter "(sAMAccountName=bob)", scope "sub"(9) ldap_domain: Waiting for search result...(9) ldap_domain: Search returned no resultsrlm_ldap (ldap_domain): Released connection (6)(9) [ldap_domain] = notfound(9) if ((ok || updated) && User-Password) {(9) if ((ok || updated) && User-Password) -> FALSE(9) pap: WARNING: Auth-Type already set. Not setting to PAP(9) [pap] = noop(9) if (User-Password) {(9) if (User-Password) -> FALSE(9) } # authorize = updated(9) Found Auth-Type = EAP(9) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel-domain(9) authenticate {(9) eap: Expiring EAP session with state 0xa0773c37a17e2697(9) eap: Finished EAP session with state 0xa0773c37a17e2697(9) eap: Previous EAP request found for state 0xa0773c37a17e2697, released from the list(9) eap: Peer sent packet with method EAP MSCHAPv2 (26)(9) eap: Calling submodule eap_mschapv2 to process data(9) eap: Sending EAP Success (code 3) ID 9 length 4(9) eap: Freeing handler(9) [eap] = ok(9) } # authenticate = ok(9) } # server inner-tunnel(9) Virtual server sending reply(9) MS-MPPE-Encryption-Policy = Encryption-Required(9) MS-MPPE-Encryption-Types = 4(9) MS-MPPE-Send-Key = 0xc40f7d178a19b383691a863644016790(9) MS-MPPE-Recv-Key = 0x1f490d8645a1a87f762bc38738f37149(9) EAP-Message = 0x03090004(9) Message-Authenticator = 0x00000000000000000000000000000000(9) User-Name = "bob"(9) eap_peap: Got tunneled reply code 2(9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required(9) eap_peap: MS-MPPE-Encryption-Types = 4(9) eap_peap: MS-MPPE-Send-Key = 0xc40f7d178a19b383691a863644016790(9) eap_peap: MS-MPPE-Recv-Key = 0x1f490d8645a1a87f762bc38738f37149(9) eap_peap: EAP-Message = 0x03090004(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(9) eap_peap: User-Name = "bob"(9) eap_peap: Got tunneled reply RADIUS code 2(9) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Required(9) eap_peap: MS-MPPE-Encryption-Types = 4(9) eap_peap: MS-MPPE-Send-Key = 0xc40f7d178a19b383691a863644016790(9) eap_peap: MS-MPPE-Recv-Key = 0x1f490d8645a1a87f762bc38738f37149(9) eap_peap: EAP-Message = 0x03090004(9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000(9) eap_peap: User-Name = "bob"(9) eap_peap: Tunneled authentication was successful(9) eap_peap: SUCCESS(9) eap: Sending EAP Request (code 1) ID 10 length 43(9) eap: EAP session adding &reply:State = 0x7322fa167b28e364(9) [eap] = handled(9) } # authenticate = handled(9) Using Post-Auth-Type Challenge(9) Post-Auth-Type sub-section not found. Ignoring.(9) Sent Access-Challenge Id 168 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(9) EAP-Message = 0x010a002b190017030100209ebe5c178129e763273f16ddd56f3f5e123f6a27587c42e7e480f2874b2985ac(9) Message-Authenticator = 0x00000000000000000000000000000000(9) State = 0x7322fa167b28e3641bb25e163c98a49d(9) Finished requestWaking up in 4.7 seconds.(10) Received Access-Request Id 89 from 192.168.2.250:3072 to 192.168.8.27:1812 length 229(10) User-Name = "bob"(10) Service-Type = Framed-User(10) NAS-IP-Address = 192.168.2.250(10) NAS-Port = 10(10) NAS-Port-Id = "10"(10) State = 0x7322fa167b28e3641bb25e163c98a49d(10) Called-Station-Id = "0E-0B-6B-2F-12-67:domain 8021X"(10) Calling-Station-Id = "B8-E8-56-41-2C-2A"(10) Connect-Info = "CONNECT 54 Mbps 802.11g"(10) NAS-Identifier = "AP-domain01"(10) NAS-Port-Type = Wireless-802.11(10) Framed-MTU = 1500(10) EAP-Message = 0x020a002b19001703010020ae6a94676019ad167b393353926209ead29be3185de748899304ff6a50957c1a(10) Message-Authenticator = 0x64a847e3ae161cf68eccda80a2f11f16(10) session-state: No cached attributes(10) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/domain(10) authorize {(10) files: users: Matched entry bob at line 69(10) [files] = ok(10) [preprocess] = ok(10) suffix: Checking for suffix after "@"(10) suffix: No '@' in User-Name = "bob", looking up realm NULL(10) suffix: No such realm "NULL"(10) [suffix] = noop(10) eap: Peer sent EAP Response (code 2) ID 10 length 43(10) eap: Continuing tunnel setup(10) [eap] = ok(10) } # authorize = ok(10) Found Auth-Type = EAP(10) # Executing group from file /usr/local/etc/raddb/sites-enabled/domain(10) authenticate {(10) eap: Expiring EAP session with state 0x7322fa167b28e364(10) eap: Finished EAP session with state 0x7322fa167b28e364(10) eap: Previous EAP request found for state 0x7322fa167b28e364, released from the list(10) eap: Peer sent packet with method EAP PEAP (25)(10) eap: Calling submodule eap_peap to process data(10) eap_peap: Continuing EAP-TLS(10) eap_peap: [eaptls verify] = ok(10) eap_peap: Done initial handshake(10) eap_peap: [eaptls process] = ok(10) eap_peap: Session established. Decoding tunneled attributes(10) eap_peap: PEAP state send tlv success(10) eap_peap: Received EAP-TLV response(10) eap_peap: Success(10) eap: Sending EAP Success (code 3) ID 10 length 4(10) eap: Freeing handler(10) [eap] = ok(10) } # authenticate = ok(10) Sent Access-Accept Id 89 from 192.168.8.27:1812 to 192.168.2.250:3072 length 0(10) MS-MPPE-Recv-Key = 0xa16bc44cb5331571c4f3d362fd38e1bb11a2670822b415e53eb7ebbc67c2cb93(10) MS-MPPE-Send-Key = 0xbd2081385181a9a51170b7fa40bfd3b32e396b6e7d46f9b5369a38d64be27cc8(10) EAP-Message = 0x030a0004(10) Message-Authenticator = 0x00000000000000000000000000000000(10) User-Name = "bob"(10) Finished requestWaking up in 4.7 seconds.(3) Cleaning up request packet ID 54 with timestamp +90(4) Cleaning up request packet ID 29 with timestamp +90Waking up in 0.1 seconds.(5) Cleaning up request packet ID 215 with timestamp +90(6) Cleaning up request packet ID 116 with timestamp +90(7) Cleaning up request packet ID 108 with timestamp +90(8) Cleaning up request packet ID 50 with timestamp +90(9) Cleaning up request packet ID 168 with timestamp +90(10) Cleaning up request packet ID 89 with timestamp +90Ready to process requests
I think that everything goes wrong with encrypt/decrypt the Domain User password or no User-Password is given after eap or something else. I tried a lot of stuff, but nothing works.
users configuration
bob Cleartext-Password := "hello"
DEFAULT Framed-Protocol == PPPFramed-Protocol = PPP,Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT Hint == "CSLIP"Framed-Protocol = SLIP,Framed-Compression = Van-Jacobson-TCP-IP
DEFAULT Hint == "SLIP"Framed-Protocol = SLIP
Messages:
(7) ldap_nedeco: Processing user attributes(7) ldap_nedeco: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute(7) ldap_nedeco: WARNING: PAP authentication will NOT work with Active Directory (if that is what you were trying to configure)rlm_ldap (ldap_nedeco): Released connection (0)..(7) mschap: WARNING: No Cleartext-Password configured. Cannot create NT-Password(7) mschap: WARNING: No Cleartext-Password configured. Cannot create LM-Password(7) mschap: Creating challenge hash with username: test(7) mschap: Client is using MS-CHAPv2(7) mschap: ERROR: FAILED: No NT/LM-Password. Cannot perform authentication(7) mschap: ERROR: MS-CHAP2-Response is incorrect..(8) eap_peap: Received EAP-TLV response(8) eap_peap: The users session was previously rejected: returning reject (again.)(8) eap_peap: This means you need to read the PREVIOUS messages in the debug output(8) eap_peap: to find out the reason why the user was rejected(8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you(8) eap_peap: what went wrong, and how to fix the problem(8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed..
Any Idea?

Torsten Wilms

Arran Cudbard-Bell

tags

participants (2)