According to what I sniff, a Access-Accept (2) with Attribute Value Pair (AVP) With l=3 Class:34 The Class is the one that changes the privileges of my users. In my case the values of this Class are 34/32/31 How can I set the Server to send an Access-Accept with the values above Best regards, and thanks a lot for the support Moshe Sakajo From: Moshe Sakajo Sent: Wednesday, August 22, 2018 18:56 To: freeradius-users@lists.freeradius.org Subject: New to FreeRadius and can't manage to get it to work for me Hi to you all I am sending this message again only this time with the full debug info. I am a QA Engineer and my concern is to make sure that the "boxes" that I test cooperate with the most popular RADIUS Server. According to other RADIUS Server that I have tested with before, I manage to authenticate a user that performs a login into our boxes. I simply defined a Default (name of the client/group) with a secret and a vendor that is general (ietf) then I defined 3 users (one for each of my privileges: admin\read&write\read-only). Each user has two attributes: 1. User_Password with a type of Check the Value is the password string 2. Class with a type of Success-Reply which controls the priveleges of the users. The Value is an integer (4/2/1) The debug log below shows a login try that I performed with a user "moshe" and password "moshe" I have set FreeRadius like this: 1. I added the clients.conf file the following client client 10.0.1.0/8<http://10.0.1.0/8> { secret = test nastype = other } 2. I added a user into the users file moshe Cleartext-Password := "moshe" Service-Type = "6" 3. The radius.conf was set with the following log {} settings auth = yes auth-goodpass = yes with all of that said I can also tell the radius.log show that the Login attempts are OK but I still get Access denied from my device, like something is still missing. Can you please tell me what might be missing ? Thanks for the support I assume that I am missing some kind of reply from the server side. At the same time I need the server to identify the right privileges (4/2/1) according to the user definitions root@radius1:/etc/freeradius# freeradius -X 2>&1 | tee debugfile freeradius: FreeRADIUS Version 2.2.8, for host x86_64-pc-linux-gnu, built on Jul 26 2017 at 15:27:21 Copyright (C) 1999-2015 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License. For more information about these matters, see the file named COPYRIGHT. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/dhcp_sqlippool including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/soh including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/radrelay including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/cache including configuration file /etc/freeradius/modules/rediswho including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/replicate including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/redis including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = yes auth_badpass = no auth_goodpass = yes } security { max_attributes = 200 reject_delay = 1 status_server = yes allow_vulnerable_openssl = no } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 10.0.1.0/8 { require_message_authenticator = no secret = "test" nastype = "other" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf modules { Module: Creating Auth-Type = digest Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 1024 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" ecdh_curve = "prime256v1" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } reading pairlist file /etc/freeradius/huntgroups reading pairlist file /etc/freeradius/hints Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } reading pairlist file /etc/freeradius/users reading pairlist file /etc/freeradius/acct_users reading pairlist file /etc/freeradius/preproxy_users Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, NAS-Identifier, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no escape_filenames = no } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.accounting_response Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" relaxed = no } reading pairlist file /etc/freeradius/attrs.access_reject } # modules } # server server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } ... adding new socket proxy address * port 34081 Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 10.0.1.211 port 49964, id=5, length=74 NAS-Identifier = "Network Equipment NAS" User-Name = "moshe" Tunnel-Medium-Type:0 = IPv4 User-Password = "moshe" # Executing section authorize from file /etc/freeradius/sites-enabled/default +group authorize { ++[preprocess] = ok ++[chap] = noop ++[mschap] = noop ++[digest] = noop [suffix] No '@' in User-Name = "moshe", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] = noop [eap] No EAP-Message, not doing EAP ++[eap] = noop [files] users: Matched entry moshe at line 89 ++[files] = ok ++[expiration] = noop ++[logintime] = noop ++[pap] = updated +} # group authorize = updated Found Auth-Type = PAP # Executing group from file /etc/freeradius/sites-enabled/default +group PAP { [pap] login attempt with password "moshe" [pap] Using clear text password "moshe" [pap] User authenticated successfully ++[pap] = ok +} # group PAP = ok Login OK: [moshe/moshe] (from client 10.0.1.0/8 port 0) # Executing section post-auth from file /etc/freeradius/sites-enabled/default +group post-auth { ++[exec] = noop +} # group post-auth = noop Sending Access-Accept of id 5 to 10.0.1.211 port 49964 Service-Type = Administrative-User Finished request 0. Going to the next request Waking up in 4.9 seconds. Cleaning up request 0 ID 5 with timestamp +21 Ready to process requests. Moshe Sakajo | Automation Developer & QA Testing Engineer Office: +972 3 7674619 Mobile: +972 50 739 4190 Fax: +972 77 865 8061 [cid:image001.jpg@01D43A6E.D16EF370]