Hello All, I have 4 servers setup exactly the same at 4 different locations. Each server is using the exact same configs and is working perfectly well doing what I want it to do. The only issue I have is at the 1 location, I am not getting any accounting requests and therefor nothing is being updated in the radacct table. Starting radiusd in debug mode -X shows that its listening for accounting requests the exact same as the 3 other locations, just no accounting requests are coming through. Is there any way to do a test to see if its even listening and working at all? I have been racking my brain over this the last few days, checking switch and router configs etc but that is all the same as the other 3 locations as well, everything is the same at all 4 locations, just this one location isn't doing the accounting. Any help would be great :) Thanks.
On Tue, Jan 3, 2012 at 4:44 PM, John Corps <envoys@gmail.com> wrote:
Hello All,
I have 4 servers setup exactly the same at 4 different locations. Each server is using the exact same configs and is working perfectly well doing what I want it to do. The only issue I have is at the 1 location, I am not getting any accounting requests and therefor nothing is being updated in the radacct table. Starting radiusd in debug mode -X shows that its listening for accounting requests the exact same as the 3 other locations, just no accounting requests are coming through. Is there any way to do a test to see if its even listening and working at all? I have been racking my brain over this the last few days, checking switch and router configs etc but that is all the same as the other 3 locations as well, everything is the same at all 4 locations, just this one location isn't doing the accounting. Any help would be great :)
Thanks. -
Hi, Is port 1813 open to the server? Kr Yves
Doing an nmap scan on the server it does show both 1812 and 1813 open UDP. The auth is working fine on 1812 so i don't understand why accounting isn't working. On Tue, Jan 3, 2012 at 2:09 PM, YvesDM <ydmlog@gmail.com> wrote:
On Tue, Jan 3, 2012 at 4:44 PM, John Corps <envoys@gmail.com> wrote:
Hello All,
I have 4 servers setup exactly the same at 4 different locations. Each server is using the exact same configs and is working perfectly well doing what I want it to do. The only issue I have is at the 1 location, I am not getting any accounting requests and therefor nothing is being updated in the radacct table. Starting radiusd in debug mode -X shows that its listening for accounting requests the exact same as the 3 other locations, just no accounting requests are coming through. Is there any way to do a test to see if its even listening and working at all? I have been racking my brain over this the last few days, checking switch and router configs etc but that is all the same as the other 3 locations as well, everything is the same at all 4 locations, just this one location isn't doing the accounting. Any help would be great :)
Thanks. -
Hi,
Is port 1813 open to the server?
Kr Yves
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
are the clients also properly configured? On 1/3/2012 11:18, John Corps wrote:
Doing an nmap scan on the server it does show both 1812 and 1813 open UDP. The auth is working fine on 1812 so i don't understand why accounting isn't working.
On Tue, Jan 3, 2012 at 2:09 PM, YvesDM<ydmlog@gmail.com> wrote:
On Tue, Jan 3, 2012 at 4:44 PM, John Corps<envoys@gmail.com> wrote:
Hello All,
I have 4 servers setup exactly the same at 4 different locations. Each server is using the exact same configs and is working perfectly well doing what I want it to do. The only issue I have is at the 1 location, I am not getting any accounting requests and therefor nothing is being updated in the radacct table. Starting radiusd in debug mode -X shows that its listening for accounting requests the exact same as the 3 other locations, just no accounting requests are coming through. Is there any way to do a test to see if its even listening and working at all? I have been racking my brain over this the last few days, checking switch and router configs etc but that is all the same as the other 3 locations as well, everything is the same at all 4 locations, just this one location isn't doing the accounting. Any help would be great :)
Thanks. -
Hi,
Is port 1813 open to the server?
Kr Yves
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Yes clients are configured properly, they are working fine to authorize correctly, its just not showing anything in debug about accounting requests. I am stumped. On Tue, Jan 3, 2012 at 4:32 PM, Christ Schlacta <lists@aarcane.org> wrote:
are the clients also properly configured?
On 1/3/2012 11:18, John Corps wrote:
Doing an nmap scan on the server it does show both 1812 and 1813 open UDP. The auth is working fine on 1812 so i don't understand why accounting isn't working.
On Tue, Jan 3, 2012 at 2:09 PM, YvesDM<ydmlog@gmail.com> wrote:
On Tue, Jan 3, 2012 at 4:44 PM, John Corps<envoys@gmail.com> wrote:
Hello All,
I have 4 servers setup exactly the same at 4 different locations. Each server is using the exact same configs and is working perfectly well doing what I want it to do. The only issue I have is at the 1 location, I am not getting any accounting requests and therefor nothing is being updated in the radacct table. Starting radiusd in debug mode -X shows that its listening for accounting requests the exact same as the 3 other locations, just no accounting requests are coming through. Is there any way to do a test to see if its even listening and working at all? I have been racking my brain over this the last few days, checking switch and router configs etc but that is all the same as the other 3 locations as well, everything is the same at all 4 locations, just this one location isn't doing the accounting. Any help would be great :)
Thanks. -
Hi,
Is port 1813 open to the server?
Kr Yves
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Issue has been fixed. Not to sure why, but reconfiguring the clients to do accounting has solved it....very strange. On Wed, Jan 4, 2012 at 11:18 AM, John Corps <envoys@gmail.com> wrote:
Yes clients are configured properly, they are working fine to authorize correctly, its just not showing anything in debug about accounting requests. I am stumped.
On Tue, Jan 3, 2012 at 4:32 PM, Christ Schlacta <lists@aarcane.org> wrote:
are the clients also properly configured?
On 1/3/2012 11:18, John Corps wrote:
Doing an nmap scan on the server it does show both 1812 and 1813 open UDP. The auth is working fine on 1812 so i don't understand why accounting isn't working.
On Tue, Jan 3, 2012 at 2:09 PM, YvesDM<ydmlog@gmail.com> wrote:
On Tue, Jan 3, 2012 at 4:44 PM, John Corps<envoys@gmail.com> wrote:
Hello All,
I have 4 servers setup exactly the same at 4 different locations. Each server is using the exact same configs and is working perfectly well doing what I want it to do. The only issue I have is at the 1 location, I am not getting any accounting requests and therefor nothing is being updated in the radacct table. Starting radiusd in debug mode -X shows that its listening for accounting requests the exact same as the 3 other locations, just no accounting requests are coming through. Is there any way to do a test to see if its even listening and working at all? I have been racking my brain over this the last few days, checking switch and router configs etc but that is all the same as the other 3 locations as well, everything is the same at all 4 locations, just this one location isn't doing the accounting. Any help would be great :)
Thanks. -
Hi,
Is port 1813 open to the server?
Kr Yves
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (3)
-
Christ Schlacta -
John Corps -
YvesDM