New subject: [EXT] Re: WPA-EAP configuration with LDAP backend calls ldap module twice

20 Mar 2019

      Hello everyone, 

I am new to this mailing list. 

We have an 'eduroam' freeradius setup with an LDAP backend, including profiles etc from LDAP. 
In part thanks to key information found on this list, the setup works and WiFi authentication works. Yeah!

However one thing has been bugging me and I cannot seem to fix it: 

* during the whole EAP/PEAP negotiation, radiusd performs the exact same LDAP calls twice. 

This occurs in step 7 and step 8 of the negotiation process, as can be seen in the debug output below: rlm_ldap performs the exact same lookups and searches in both steps.

How can I prevent this from happening? The LDAP servers are fast, but this means an unnecessary doubling of the load radiusd places on them, and we have many hundreds of thousands of authentications per day. 

Thanks, regards,

Mark van Reijn

Debug output:

FreeRADIUS Version 3.0.15
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/eduroam-proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/nivo-eap-inner
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/cache
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/nivo-linelog
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/nivo-eap
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/nivo-ldap
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/dhcp
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/nivo-eduroam-inner
including configuration file /etc/raddb/sites-enabled/nivo-eduroam
main {
 security {
 	allow_core_dumps = no
 }
	name = "radiusd"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/radius"
	run_dir = "/var/run/radiusd"
}
main {
	name = "radiusd"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/radius"
	run_dir = "/var/run/radiusd"
	libdir = "/usr/lib64/freeradius"
	radacctdir = "/var/log/radius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/radiusd/radiusd.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 home_server eduroam_flr_server_1 {
 	ipaddr = radius1.eduroam.kennisnet.nl IPv4 address [145.97.36.58]
 	port = 0
 	secret = <<< secret >>>
 	response_window = 30.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 300
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server eduroam_flr_server_2 {
 	ipaddr = radius2.eduroam.kennisnet.nl IPv4 address [145.97.36.59]
 	port = 0
 	secret = <<< secret >>>
 	response_window = 30.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 300
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool eduroam_flr_pool {
	type = keyed-balance
	home_server = eduroam_flr_server_1
	home_server = eduroam_flr_server_2
 }
 realm eduroam_flr {
	auth_pool = eduroam_flr_pool
	nostrip
 }
radiusd: #### Loading Clients ####
Debugger not attached
 # Creating Auth-Type = inner-eap
 # Creating Auth-Type = mschap
 # Creating Auth-Type = pap
 # Creating Auth-Type = eap
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_eap
  # Loading module "inner-eap" from file /etc/raddb/mods-enabled/nivo-eap-inner
  eap inner-eap {
  	default_eap_type = "mschapv2"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/radius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_cache
  # Loading module "cache" from file /etc/raddb/mods-enabled/cache
  cache {
  	driver = "rlm_cache_rbtree"
  	key = "%{User-Name}"
  	ttl = 10
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  	hints = "/etc/raddb/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/radius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_linelog
  # Loading module "linelog_recv_request" from file /etc/raddb/mods-enabled/nivo-linelog
  linelog linelog_recv_request {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_facility = "local0"
  	syslog_severity = "debug"
  	permissions = 384
  	format = "action = Recv-Request, %{pairs:request:}"
  }
  # Loading module "linelog_send_accept" from file /etc/raddb/mods-enabled/nivo-linelog
  linelog linelog_send_accept {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_facility = "local0"
  	syslog_severity = "debug"
  	permissions = 384
  	format = "action = Send-Accept, %{pairs:reply:}"
  }
  # Loading module "linelog_send_reject" from file /etc/raddb/mods-enabled/nivo-linelog
  linelog linelog_send_reject {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_facility = "local0"
  	syslog_severity = "debug"
  	permissions = 384
  	format = "action = Send-Reject, %{pairs:request:}"
  }
  # Loading module "linelog_send_proxy_request" from file /etc/raddb/mods-enabled/nivo-linelog
  linelog linelog_send_proxy_request {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_facility = "local0"
  	syslog_severity = "debug"
  	permissions = 384
  	format = "action = Send-Proxy-Request, %{pairs:proxy-request:}"
  }
  # Loading module "linelog_recv_proxy_response" from file /etc/raddb/mods-enabled/nivo-linelog
  linelog linelog_recv_proxy_response {
  	filename = "syslog"
  	escape_filenames = no
  	syslog_facility = "local0"
  	syslog_severity = "debug"
  	permissions = 384
  	format = "action = Recv-Proxy-Response, %{pairs:proxy-reply:}"
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loading module "eap" from file /etc/raddb/mods-enabled/nivo-eap
  eap {
  	default_eap_type = "peap"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_ldap
  # Loading module "ldap" from file /etc/raddb/mods-enabled/nivo-ldap
  ldap {
  	server = "localhost"
  	port = 389
  	identity = "cn=sa-radius,ou=accounts,o=services"
  	password = <<< secret >>>
   sasl {
   }
  	valuepair_attribute = "nivoRadiusAttribute"
  	edir = yes
  	edir_autz = yes
  	read_clients = yes
   user {
   	scope = "sub"
   	access_attribute = "nivoRadiusNoAccess"
   	access_positive = no
    sasl {
    }
   }
   group {
   	filter = "(objectClass=nivoGroup)"
   	scope = "one"
   	name_attribute = "cn"
   	membership_attribute = "groupMembership"
   	membership_filter = "(member=%{control:Ldap-UserDn})"
   	cacheable_name = no
   	cacheable_dn = no
   }
   client {
   	filter = "(objectClass=nivoRadiusClient)"
   	scope = "one"
   	base_dn = "ou=clients,ou=radius,o=config"
   }
   profile {
   	attribute = "nivoRadiusProfileDn"
   }
   options {
   	ldap_debug = 40
   	chase_referrals = yes
   	rebind = no
   	net_timeout = 1
   	res_timeout = 10
   	srv_timelimit = 3
   	idle = 60
   	probes = 3
   	interval = 3
   }
   tls {
   	start_tls = yes
   	require_cert = "never"
   }
  }
Creating attribute LDAP-Group
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  	filename = "/var/log/radius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/radius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
  	format = "%b %e %Y %H:%M:%S %Z"
  	utc = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  instantiate {
  }
  # Instantiating module "inner-eap" from file /etc/raddb/mods-enabled/nivo-eap-inner
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
   	with_ntdomain_hack = no
   	send_error = yes
   }
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Instantiating module "cache" from file /etc/raddb/mods-enabled/cache
rlm_cache (cache): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" 	found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" 	found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "linelog_recv_request" from file /etc/raddb/mods-enabled/nivo-linelog
  # Instantiating module "linelog_send_accept" from file /etc/raddb/mods-enabled/nivo-linelog
  # Instantiating module "linelog_send_reject" from file /etc/raddb/mods-enabled/nivo-linelog
  # Instantiating module "linelog_send_proxy_request" from file /etc/raddb/mods-enabled/nivo-linelog
  # Instantiating module "linelog_recv_proxy_response" from file /etc/raddb/mods-enabled/nivo-linelog
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/nivo-eap
   # Linked to sub-module rlm_eap_ttls
   ttls {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = yes
   	use_tunneled_reply = no
   	virtual_server = "eduroam-inner"
   	include_length = yes
   	require_client_cert = no
   }
   tls-config tls-common {
   	verify_depth = 0
   	pem_file_type = yes
   	private_key_file = "/etc/raddb/certs/server.key"
   	certificate_file = "/etc/raddb/certs/server.pem"
   	ca_file = "/etc/raddb/certs/ca.pem"
   	private_key_password = <<< secret >>>
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	ecdh_curve = "prime256v1"
    cache {
    	enable = yes
    	lifetime = 8
    	name = "nivo-cache"
    	max_entries = 0
    	persist_dir = "/var/log/radius/tlscache"
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = yes
    	override_cert_url = no
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
   # Linked to sub-module rlm_eap_peap
   peap {
   	tls = "tls-common"
   	default_eap_type = "mschapv2"
   	copy_request_to_tunnel = yes
   	use_tunneled_reply = no
   	proxy_tunneled_request_as_eap = yes
   	virtual_server = "eduroam-inner"
   	soh = no
   	require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "ldap" from file /etc/raddb/mods-enabled/nivo-ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20441
   accounting {
   	reference = "%{tolower:type.%{Acct-Status-Type}}"
   }
   post-auth {
   	reference = "."
   }
rlm_ldap (ldap): Initialising connection pool
   pool {
   	start = 5
   	min = 3
   	max = 32
   	spare = 10
   	uses = 0
   	lifetime = 0
   	cleanup_interval = 30
   	idle_timeout = 60
   	retry_delay = 30
   	spread = no
   }
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Loading dynamic clients
rlm_ldap (ldap): Reserved connection (0)
rlm_ldap (ldap): Performing search in "ou=clients,ou=radius,o=config" with filter "(objectClass=nivoRadiusClient)", scope "one"
rlm_ldap (ldap): Waiting for search result...
    client cn=localhost,ou=clients,ou=radius,o=config {
    	ipaddr = 127.0.0.1
    	require_message_authenticator = no
    	secret = <<< secret >>>
    	shortname = "nivo"
    	nas_type = "other"
     limit {
     	max_connections = 16
     	lifetime = 0
     	idle_timeout = 30
     }
    }
rlm_ldap (ldap): Client "cn=localhost,ou=clients,ou=radius,o=config" added
    client cn=obelix,ou=clients,ou=radius,o=config {
    	ipaddr = 172.16.48.123
    	require_message_authenticator = no
    	secret = <<< secret >>>
    	shortname = "obelix"
    	nas_type = "obelix"
     limit {
     	max_connections = 16
     	lifetime = 0
     	idle_timeout = 30
     }
    }
rlm_ldap (ldap): Client "cn=obelix,ou=clients,ou=radius,o=config" added
    client cn=nivo-school,ou=clients,ou=radius,o=config {
    	ipaddr = 172.16.48.115
    	require_message_authenticator = no
    	secret = <<< secret >>>
    	shortname = "josef"
    	nas_type = "other"
     limit {
     	max_connections = 16
     	lifetime = 0
     	idle_timeout = 30
     }
    }
rlm_ldap (ldap): Client "cn=nivo-school,ou=clients,ou=radius,o=config" added
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server eduroam-inner { # from file /etc/raddb/sites-enabled/nivo-eduroam-inner
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading post-auth {...}
} # server eduroam-inner
server eduroam { # from file /etc/raddb/sites-enabled/nivo-eduroam
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading pre-proxy {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server eduroam
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = *
  	port = 18120
}
listen {
  	type = "auth"
  	ipaddr = *
  	port = 1812
}
Listening on auth address * port 18120 bound to server eduroam-inner
Listening on auth address * port 1812 bound to server eduroam
Listening on proxy address * port 44873
Ready to process requests
(0) Received Access-Request Id 0 from 127.0.0.1:45195 to 127.0.0.1:1812 length 148
(0)   User-Name = "anonymous@nivo.im"
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Connect-Info = "CONNECT 11Mbps 802.11b"
(0)   EAP-Message = 0x0200001601616e6f6e796d6f7573406e69766f2e696d
(0)   Message-Authenticator = 0x598a0aeeccecf47c0123369b319270f8
(0) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(0)   authorize {
(0)     policy split_username_nai {
(0)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(0)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(0)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(0)         update request {
(0)           EXPAND %{1}
(0)              --> anonymous
(0)           &Stripped-User-Name := anonymous
(0)           EXPAND %{3}
(0)              --> nivo.im
(0)           &Stripped-User-Domain = nivo.im
(0)         } # update request = noop
(0)         [updated] = updated
(0)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(0)       ... skipping else: Preceding "if" was taken
(0)     } # policy split_username_nai = updated
(0)     if (noop || !&Stripped-User-Domain) {
(0)     if (noop || !&Stripped-User-Domain)  -> FALSE
(0)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(0)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(0) eap: Peer sent EAP Response (code 2) ID 0 length 22
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: Initiating new EAP-TLS session
(0) eap_peap: Flushing SSL sessions (of #0)
(0) eap_peap: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 1 length 6
(0) eap: EAP session adding &reply:State = 0x83a5a6c583a4bf32
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(0)   Post-Auth-Type Challenge {
(0)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(0)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(0)   } # Post-Auth-Type Challenge = noop
(0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(0)   EAP-Message = 0x010100061920
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0x83a5a6c583a4bf3297f8fb882007e6d8
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 1 from 127.0.0.1:45195 to 127.0.0.1:1812 length 445
(1)   User-Name = "anonymous@nivo.im"
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   EAP-Message = 0x0201012b198000000121160301011c010001180303ce8317d9ecb7a6bf3c59be1461cc65455c708fd520665680cbccbdec4085cbcf0000aac030c02cc028c024c014c00a00a500a300a1009f006b006a0069006800390038003700360088008700860085c032c02ec02ac026c00fc005009d003d003500
(1)   State = 0x83a5a6c583a4bf3297f8fb882007e6d8
(1)   Message-Authenticator = 0x7ae8869203bff2c67be3913f8a582d4c
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(1)   authorize {
(1)     policy split_username_nai {
(1)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(1)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(1)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(1)         update request {
(1)           EXPAND %{1}
(1)              --> anonymous
(1)           &Stripped-User-Name := anonymous
(1)           EXPAND %{3}
(1)              --> nivo.im
(1)           &Stripped-User-Domain = nivo.im
(1)         } # update request = noop
(1)         [updated] = updated
(1)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(1)       ... skipping else: Preceding "if" was taken
(1)     } # policy split_username_nai = updated
(1)     if (noop || !&Stripped-User-Domain) {
(1)     if (noop || !&Stripped-User-Domain)  -> FALSE
(1)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(1)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(1) eap: Peer sent EAP Response (code 2) ID 1 length 299
(1) eap: Continuing tunnel setup
(1)     [eap] = ok
(1)   } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(1)   authenticate {
(1) eap: Expiring EAP session with state 0x83a5a6c583a4bf32
(1) eap: Finished EAP session with state 0x83a5a6c583a4bf32
(1) eap: Previous EAP request found for state 0x83a5a6c583a4bf32, released from the list
(1) eap: Peer sent packet with method EAP PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Continuing EAP-TLS
(1) eap_peap: Peer indicated complete TLS record size will be 289 bytes
(1) eap_peap: Got complete TLS record (289 bytes)
(1) eap_peap: [eaptls verify] = length included
(1) eap_peap: (other): before/accept initialization
(1) eap_peap: TLS_accept: before/accept initialization
(1) eap_peap: <<< recv TLS 1.2  [length 011c]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2  [length 005e]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2  [length 08d3]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2  [length 014d]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: >>> send TLS 1.2  [length 0004]
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: TLS_accept: unknown state
(1) eap_peap: TLS_accept: Need to read more data: unknown state
(1) eap_peap: TLS_accept: Need to read more data: unknown state
(1) eap_peap: In SSL Handshake Phase
(1) eap_peap: In SSL Accept mode
(1) eap_peap: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 2 length 1014
(1) eap: EAP session adding &reply:State = 0x83a5a6c582a7bf32
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(1)   Post-Auth-Type Challenge {
(1)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(1)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(1)   } # Post-Auth-Type Challenge = noop
(1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(1)   EAP-Message = 0x010203f619c000000a96160303005e0200005a0303a4f2f123d577a5ab1475eb713c7ae79668b085624dc262ebfb3a20c15d7e76d1202dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154dc030000012ff01000100000b000403000102000f00010116030308d30b0008cf00
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0x83a5a6c582a7bf3297f8fb882007e6d8
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 2 from 127.0.0.1:45195 to 127.0.0.1:1812 length 150
(2)   User-Name = "anonymous@nivo.im"
(2)   NAS-IP-Address = 127.0.0.1
(2)   Calling-Station-Id = "02-00-00-00-00-01"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Connect-Info = "CONNECT 11Mbps 802.11b"
(2)   EAP-Message = 0x020200061900
(2)   State = 0x83a5a6c582a7bf3297f8fb882007e6d8
(2)   Message-Authenticator = 0xc3baacf775e22132870f178153c40328
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(2)   authorize {
(2)     policy split_username_nai {
(2)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(2)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(2)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(2)         update request {
(2)           EXPAND %{1}
(2)              --> anonymous
(2)           &Stripped-User-Name := anonymous
(2)           EXPAND %{3}
(2)              --> nivo.im
(2)           &Stripped-User-Domain = nivo.im
(2)         } # update request = noop
(2)         [updated] = updated
(2)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(2)       ... skipping else: Preceding "if" was taken
(2)     } # policy split_username_nai = updated
(2)     if (noop || !&Stripped-User-Domain) {
(2)     if (noop || !&Stripped-User-Domain)  -> FALSE
(2)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(2)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(2) eap: Peer sent EAP Response (code 2) ID 2 length 6
(2) eap: Continuing tunnel setup
(2)     [eap] = ok
(2)   } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(2)   authenticate {
(2) eap: Expiring EAP session with state 0x83a5a6c582a7bf32
(2) eap: Finished EAP session with state 0x83a5a6c582a7bf32
(2) eap: Previous EAP request found for state 0x83a5a6c582a7bf32, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer ACKed our handshake fragment
(2) eap_peap: [eaptls verify] = request
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 3 length 1010
(2) eap: EAP session adding &reply:State = 0x83a5a6c581a6bf32
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(2)   Post-Auth-Type Challenge {
(2)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(2)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(2)   } # Post-Auth-Type Challenge = noop
(2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(2)   EAP-Message = 0x010303f21940f9a92d7bc1831ce43842a7729308f0bebd13f6ed29f940d889e39e8c3bc921fbbe4c0bced1da32d8fc80b36ab48f83b37d00a663f8b5e2407701fbce3c4dcfd21530d0c3e94f08e1277619aa8cbc174cd04fc49d38e5f82576712e34f16e66898648396a0004e8308204e4308203cca003
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0x83a5a6c581a6bf3297f8fb882007e6d8
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 3 from 127.0.0.1:45195 to 127.0.0.1:1812 length 150
(3)   User-Name = "anonymous@nivo.im"
(3)   NAS-IP-Address = 127.0.0.1
(3)   Calling-Station-Id = "02-00-00-00-00-01"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Connect-Info = "CONNECT 11Mbps 802.11b"
(3)   EAP-Message = 0x020300061900
(3)   State = 0x83a5a6c581a6bf3297f8fb882007e6d8
(3)   Message-Authenticator = 0x1da38e54b87f3c8958f17c2028642d94
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(3)   authorize {
(3)     policy split_username_nai {
(3)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(3)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(3)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(3)         update request {
(3)           EXPAND %{1}
(3)              --> anonymous
(3)           &Stripped-User-Name := anonymous
(3)           EXPAND %{3}
(3)              --> nivo.im
(3)           &Stripped-User-Domain = nivo.im
(3)         } # update request = noop
(3)         [updated] = updated
(3)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(3)       ... skipping else: Preceding "if" was taken
(3)     } # policy split_username_nai = updated
(3)     if (noop || !&Stripped-User-Domain) {
(3)     if (noop || !&Stripped-User-Domain)  -> FALSE
(3)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(3)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(3) eap: Peer sent EAP Response (code 2) ID 3 length 6
(3) eap: Continuing tunnel setup
(3)     [eap] = ok
(3)   } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(3)   authenticate {
(3) eap: Expiring EAP session with state 0x83a5a6c581a6bf32
(3) eap: Finished EAP session with state 0x83a5a6c581a6bf32
(3) eap: Previous EAP request found for state 0x83a5a6c581a6bf32, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 4 length 708
(3) eap: EAP session adding &reply:State = 0x83a5a6c580a1bf32
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(3)   Post-Auth-Type Challenge {
(3)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(3)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(3)   } # Post-Auth-Type Challenge = noop
(3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(3)   EAP-Message = 0x010402c41900e4cf09c90800300f0603551d130101ff040530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b050003820101003803d3dfabad274231f8a05e1ad8
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0x83a5a6c580a1bf3297f8fb882007e6d8
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 4 from 127.0.0.1:45195 to 127.0.0.1:1812 length 280
(4)   User-Name = "anonymous@nivo.im"
(4)   NAS-IP-Address = 127.0.0.1
(4)   Calling-Station-Id = "02-00-00-00-00-01"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Connect-Info = "CONNECT 11Mbps 802.11b"
(4)   EAP-Message = 0x0204008819800000007e1603030046100000424104a1a455296c78320c0ac73e21a9fc1b81bcdaec90a80082d60944ade1483d0c129bec406de432b4590dadb0c61bddeaa20678ea06c012bdff92fedc493b973e351403030001011603030028d555a9d7a5232c19830ef49204771f9ac8ad24c593310d
(4)   State = 0x83a5a6c580a1bf3297f8fb882007e6d8
(4)   Message-Authenticator = 0xf22d6434b677b0c13c5af39287124050
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(4)   authorize {
(4)     policy split_username_nai {
(4)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(4)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(4)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(4)         update request {
(4)           EXPAND %{1}
(4)              --> anonymous
(4)           &Stripped-User-Name := anonymous
(4)           EXPAND %{3}
(4)              --> nivo.im
(4)           &Stripped-User-Domain = nivo.im
(4)         } # update request = noop
(4)         [updated] = updated
(4)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(4)       ... skipping else: Preceding "if" was taken
(4)     } # policy split_username_nai = updated
(4)     if (noop || !&Stripped-User-Domain) {
(4)     if (noop || !&Stripped-User-Domain)  -> FALSE
(4)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(4)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(4) eap: Peer sent EAP Response (code 2) ID 4 length 136
(4) eap: Continuing tunnel setup
(4)     [eap] = ok
(4)   } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(4)   authenticate {
(4) eap: Expiring EAP session with state 0x83a5a6c580a1bf32
(4) eap: Finished EAP session with state 0x83a5a6c580a1bf32
(4) eap: Previous EAP request found for state 0x83a5a6c580a1bf32, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: <<< recv TLS 1.2  [length 0046]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: <<< recv TLS 1.2  [length 0001]
(4) eap_peap: <<< recv TLS 1.2  [length 0010]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: >>> send TLS 1.2  [length 0001]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: >>> send TLS 1.2  [length 0010]
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: TLS_accept: unknown state
(4) eap_peap: Serialising session 2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d, and storing in cache
(4) eap_peap: WARNING: Wrote session 2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d to /var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1 (133 bytes)
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 5 length 57
(4) eap: EAP session adding &reply:State = 0x83a5a6c587a0bf32
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(4)   Post-Auth-Type Challenge {
(4)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(4)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(4)   } # Post-Auth-Type Challenge = noop
(4) session-state: Saving cached attributes
(4)   TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(4)   EAP-Message = 0x01050039190014030300010116030300288cb26cdae48a74dc6dbef534a1076f2317cafd2255a15e2469a2d298a212df4f1e030418ac22286f
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0x83a5a6c587a0bf3297f8fb882007e6d8
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 5 from 127.0.0.1:45195 to 127.0.0.1:1812 length 150
(5)   User-Name = "anonymous@nivo.im"
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = "02-00-00-00-00-01"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Connect-Info = "CONNECT 11Mbps 802.11b"
(5)   EAP-Message = 0x020500061900
(5)   State = 0x83a5a6c587a0bf3297f8fb882007e6d8
(5)   Message-Authenticator = 0x635da02ba9bd74263ddaca65cc1bf424
(5) Restoring &session-state
(5)   &session-state:TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(5) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(5)   authorize {
(5)     policy split_username_nai {
(5)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(5)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(5)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(5)         update request {
(5)           EXPAND %{1}
(5)              --> anonymous
(5)           &Stripped-User-Name := anonymous
(5)           EXPAND %{3}
(5)              --> nivo.im
(5)           &Stripped-User-Domain = nivo.im
(5)         } # update request = noop
(5)         [updated] = updated
(5)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(5)       ... skipping else: Preceding "if" was taken
(5)     } # policy split_username_nai = updated
(5)     if (noop || !&Stripped-User-Domain) {
(5)     if (noop || !&Stripped-User-Domain)  -> FALSE
(5)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(5)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(5) eap: Peer sent EAP Response (code 2) ID 5 length 6
(5) eap: Continuing tunnel setup
(5)     [eap] = ok
(5)   } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(5)   authenticate {
(5) eap: Expiring EAP session with state 0x83a5a6c587a0bf32
(5) eap: Finished EAP session with state 0x83a5a6c587a0bf32
(5) eap: Previous EAP request found for state 0x83a5a6c587a0bf32, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment.  handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established.  Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 6 length 40
(5) eap: EAP session adding &reply:State = 0x83a5a6c586a3bf32
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(5)   Post-Auth-Type Challenge {
(5)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(5)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(5)   } # Post-Auth-Type Challenge = noop
(5) session-state: Saving cached attributes
(5)   TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(5)   EAP-Message = 0x010600281900170303001d8cb26cdae48a74ddf10aeb4d683568c03fae04ca77c572c9d6381bbf35
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0x83a5a6c586a3bf3297f8fb882007e6d8
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 6 from 127.0.0.1:45195 to 127.0.0.1:1812 length 199
(6)   User-Name = "anonymous@nivo.im"
(6)   NAS-IP-Address = 127.0.0.1
(6)   Calling-Station-Id = "02-00-00-00-00-01"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6)   EAP-Message = 0x020600371900170303002cd555a9d7a5232c1a7e404a719962ba649d98f720d64f302c06c9ea15eb17a9d3dcc7c54e3385bdd0bfe33cf0
(6)   State = 0x83a5a6c586a3bf3297f8fb882007e6d8
(6)   Message-Authenticator = 0xcb0a8eb8dd3aee90e7221258ef39808c
(6) Restoring &session-state
(6)   &session-state:TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(6) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(6)   authorize {
(6)     policy split_username_nai {
(6)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(6)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(6)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(6)         update request {
(6)           EXPAND %{1}
(6)              --> anonymous
(6)           &Stripped-User-Name := anonymous
(6)           EXPAND %{3}
(6)              --> nivo.im
(6)           &Stripped-User-Domain = nivo.im
(6)         } # update request = noop
(6)         [updated] = updated
(6)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(6)       ... skipping else: Preceding "if" was taken
(6)     } # policy split_username_nai = updated
(6)     if (noop || !&Stripped-User-Domain) {
(6)     if (noop || !&Stripped-User-Domain)  -> FALSE
(6)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(6)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(6) eap: Peer sent EAP Response (code 2) ID 6 length 55
(6) eap: Continuing tunnel setup
(6)     [eap] = ok
(6)   } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(6)   authenticate {
(6) eap: Expiring EAP session with state 0x83a5a6c586a3bf32
(6) eap: Finished EAP session with state 0x83a5a6c586a3bf32
(6) eap: Previous EAP request found for state 0x83a5a6c586a3bf32, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established.  Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - radius-test@nivo.im
(6) eap_peap: Got inner identity 'radius-test@nivo.im'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap:   EAP-Message = 0x02060018017261646975732d74657374406e69766f2e696d
(6) eap_peap: Setting User-Name to radius-test@nivo.im
(6) eap_peap: Sending tunneled request to eduroam-inner
(6) eap_peap:   EAP-Message = 0x02060018017261646975732d74657374406e69766f2e696d
(6) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap:   User-Name = "radius-test@nivo.im"
(6) eap_peap:   NAS-IP-Address = 127.0.0.1
(6) eap_peap:   Calling-Station-Id = "02-00-00-00-00-01"
(6) eap_peap:   Framed-MTU = 1400
(6) eap_peap:   NAS-Port-Type = Wireless-802.11
(6) eap_peap:   Service-Type = Framed-User
(6) eap_peap:   Connect-Info = "CONNECT 11Mbps 802.11b"
(6) Virtual server eduroam-inner received request
(6)   EAP-Message = 0x02060018017261646975732d74657374406e69766f2e696d
(6)   FreeRADIUS-Proxied-To = 127.0.0.1
(6)   User-Name = "radius-test@nivo.im"
(6)   NAS-IP-Address = 127.0.0.1
(6)   Calling-Station-Id = "02-00-00-00-00-01"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6) server eduroam-inner {
(6)   # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(6)     authorize {
(6)       policy split_username_nai {
(6)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(6)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(6)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(6)           update request {
(6)             EXPAND %{1}
(6)                --> radius-test
(6)             &Stripped-User-Name := radius-test
(6)             EXPAND %{3}
(6)                --> nivo.im
(6)             &Stripped-User-Domain = nivo.im
(6)           } # update request = noop
(6)           [updated] = updated
(6)         } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(6)         ... skipping else: Preceding "if" was taken
(6)       } # policy split_username_nai = updated
(6)       if (noop || (&Stripped-User-Domain &&         (&outer.Stripped-User-Domain != &Stripped-User-Domain))) {
(6)       if (noop || (&Stripped-User-Domain &&         (&outer.Stripped-User-Domain != &Stripped-User-Domain)))  -> FALSE
(6) inner-eap: Peer sent EAP Response (code 2) ID 6 length 24
(6) inner-eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6)       [inner-eap] = ok
(6)     } # authorize = ok
(6)   Found Auth-Type = inner-eap
(6)   # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(6)     authenticate {
(6) inner-eap: Peer sent packet with method EAP Identity (1)
(6) inner-eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) inner-eap: Sending EAP Request (code 1) ID 7 length 43
(6) inner-eap: EAP session adding &reply:State = 0xfb1af5c9fb1def35
(6)       [inner-eap] = handled
(6)     } # authenticate = handled
(6) } # server eduroam-inner
(6) Virtual server sending reply
(6)   EAP-Message = 0x0107002b1a0107002610d41937003d907712ef774dbca8cc34dc667265657261646975732d332e302e3135
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xfb1af5c9fb1def35157513a9c717c55d
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap:   EAP-Message = 0x0107002b1a0107002610d41937003d907712ef774dbca8cc34dc667265657261646975732d332e302e3135
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0xfb1af5c9fb1def35157513a9c717c55d
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap:   EAP-Message = 0x0107002b1a0107002610d41937003d907712ef774dbca8cc34dc667265657261646975732d332e302e3135
(6) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap:   State = 0xfb1af5c9fb1def35157513a9c717c55d
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 7 length 74
(6) eap: EAP session adding &reply:State = 0x83a5a6c585a2bf32
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(6)   Post-Auth-Type Challenge {
(6)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(6)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(6)   } # Post-Auth-Type Challenge = noop
(6) session-state: Saving cached attributes
(6)   TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(6) Sent Access-Challenge Id 6 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(6)   EAP-Message = 0x0107004a1900170303003f8cb26cdae48a74dec87881efd8d62a908a7d1ddb3bd4243da2120f725575a68aa8accf7909f8ecfcd66e17c501a72ca41155d086d85d354fc9d51c31c377fd
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0x83a5a6c585a2bf3297f8fb882007e6d8
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 7 from 127.0.0.1:45195 to 127.0.0.1:1812 length 253
(7)   User-Name = "anonymous@nivo.im"
(7)   NAS-IP-Address = 127.0.0.1
(7)   Calling-Station-Id = "02-00-00-00-00-01"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Connect-Info = "CONNECT 11Mbps 802.11b"
(7)   EAP-Message = 0x0207006d19001703030062d555a9d7a5232c1bfb602be71ac506ab40e0048020768c920e2d5640fac15ca5e03b5f194bd604e782ea40a408f996268b8b1032de7eab329a611c852ea2651e9726c9ff0a40104838f4ff1c863c0b455818b690c26e205e2e39b893fcf7060d6e66
(7)   State = 0x83a5a6c585a2bf3297f8fb882007e6d8
(7)   Message-Authenticator = 0xb1aa26a3f3238f694baff19daef1c49f
(7) Restoring &session-state
(7)   &session-state:TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(7) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(7)   authorize {
(7)     policy split_username_nai {
(7)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(7)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(7)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(7)         update request {
(7)           EXPAND %{1}
(7)              --> anonymous
(7)           &Stripped-User-Name := anonymous
(7)           EXPAND %{3}
(7)              --> nivo.im
(7)           &Stripped-User-Domain = nivo.im
(7)         } # update request = noop
(7)         [updated] = updated
(7)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(7)       ... skipping else: Preceding "if" was taken
(7)     } # policy split_username_nai = updated
(7)     if (noop || !&Stripped-User-Domain) {
(7)     if (noop || !&Stripped-User-Domain)  -> FALSE
(7)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(7)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(7) eap: Peer sent EAP Response (code 2) ID 7 length 109
(7) eap: Continuing tunnel setup
(7)     [eap] = ok
(7)   } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(7)   authenticate {
(7) eap: Expiring EAP session with state 0x83a5a6c585a2bf32
(7) eap: Finished EAP session with state 0x83a5a6c585a2bf32
(7) eap: Previous EAP request found for state 0x83a5a6c585a2bf32, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established.  Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap:   EAP-Message = 0x0207004e1a0207004931dbc2433d9ded0530d4e0d99bb7319cc10000000000000000023df6c38ea64f8069dc29233129b9bba71271cc1821e701007261646975732d74657374406e69766f2e696d
(7) eap_peap: Setting User-Name to radius-test@nivo.im
(7) eap_peap: Sending tunneled request to eduroam-inner
(7) eap_peap:   EAP-Message = 0x0207004e1a0207004931dbc2433d9ded0530d4e0d99bb7319cc10000000000000000023df6c38ea64f8069dc29233129b9bba71271cc1821e701007261646975732d74657374406e69766f2e696d
(7) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap:   User-Name = "radius-test@nivo.im"
(7) eap_peap:   State = 0xfb1af5c9fb1def35157513a9c717c55d
(7) eap_peap:   NAS-IP-Address = 127.0.0.1
(7) eap_peap:   Calling-Station-Id = "02-00-00-00-00-01"
(7) eap_peap:   Framed-MTU = 1400
(7) eap_peap:   NAS-Port-Type = Wireless-802.11
(7) eap_peap:   Service-Type = Framed-User
(7) eap_peap:   Connect-Info = "CONNECT 11Mbps 802.11b"
(7) Virtual server eduroam-inner received request
(7)   EAP-Message = 0x0207004e1a0207004931dbc2433d9ded0530d4e0d99bb7319cc10000000000000000023df6c38ea64f8069dc29233129b9bba71271cc1821e701007261646975732d74657374406e69766f2e696d
(7)   FreeRADIUS-Proxied-To = 127.0.0.1
(7)   User-Name = "radius-test@nivo.im"
(7)   State = 0xfb1af5c9fb1def35157513a9c717c55d
(7)   NAS-IP-Address = 127.0.0.1
(7)   Calling-Station-Id = "02-00-00-00-00-01"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Connect-Info = "CONNECT 11Mbps 802.11b"
(7) server eduroam-inner {
(7)   session-state: No cached attributes
(7)   # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(7)     authorize {
(7)       policy split_username_nai {
(7)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(7)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(7)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(7)           update request {
(7)             EXPAND %{1}
(7)                --> radius-test
(7)             &Stripped-User-Name := radius-test
(7)             EXPAND %{3}
(7)                --> nivo.im
(7)             &Stripped-User-Domain = nivo.im
(7)           } # update request = noop
(7)           [updated] = updated
(7)         } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(7)         ... skipping else: Preceding "if" was taken
(7)       } # policy split_username_nai = updated
(7)       if (noop || (&Stripped-User-Domain &&         (&outer.Stripped-User-Domain != &Stripped-User-Domain))) {
(7)       if (noop || (&Stripped-User-Domain &&         (&outer.Stripped-User-Domain != &Stripped-User-Domain)))  -> FALSE
(7) inner-eap: Peer sent EAP Response (code 2) ID 7 length 78
(7) inner-eap: No EAP Start, assuming it's an on-going EAP conversation
(7)       [inner-eap] = updated
rlm_ldap (ldap): Reserved connection (1)
(7) ldap: EXPAND (nivoUserName=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap:    --> (nivoUserName=radius-test)
(7) ldap: Performing search in "ou=identities,o=vault" with filter "(nivoUserName=radius-test)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: User object found at DN "cn=radius-test,ou=guests,ou=identities,o=vault"
(7) ldap: Added eDirectory password
(7) ldap: Binding as user for eDirectory authorization checks
(7) ldap: Waiting for bind result...
(7) ldap: Bind successful
(7) ldap: Bind as user 'cn=radius-test,ou=guests,ou=identities,o=vault' was successful
(7) ldap: Waiting for bind result...
(7) ldap: Bind successful
(7) ldap: Performing search in "cn=default,ou=profiles,ou=radius,o=config" with filter "(objectclass=nivoRadiusProfile)", scope "base"
(7) ldap: Waiting for search result...
(7) ldap: Processing profile attributes
(7) ldap: Tunnel-Medium-Type := IEEE-802
(7) ldap: Tunnel-Private-Group-Id := 100
(7) ldap: Tunnel-Type := VLAN
(7) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used
rlm_ldap (ldap): Connecting to ldap://localhost:389
TLS certificate verification: Error, self signed certificate in certificate chain
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7)       [ldap] = updated
(7)       update {
rlm_ldap (ldap): Reserved connection (2)
(7)         Performing search in "ou=groups,o=vault" with filter "(&(member=cn\3dradius-test\2cou\3dguests\2cou\3didentities\2co\3dvault)(nivoRadiusProfileDN=*))", scope "one"
(7)         Waiting for search result...
(7)         Search returned no results
rlm_ldap (ldap): Released connection (2)
(7)         EXPAND %{ldap:ldap:///ou=groups,o=vault?nivoRadiusProfileDN?one?(&(member=%{control:Ldap-UserDN})(nivoRadiusProfileDN=*))}
(7)            -->
(7)         User-Profile :=
(7)       } # update = noop
(7) pap: WARNING: Auth-Type already set.  Not setting to PAP
(7)       [pap] = noop
(7)       [mschap] = noop
(7)     } # authorize = updated
(7)   Found Auth-Type = inner-eap
(7)   # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(7)     authenticate {
(7) inner-eap: Expiring EAP session with state 0xfb1af5c9fb1def35
(7) inner-eap: Finished EAP session with state 0xfb1af5c9fb1def35
(7) inner-eap: Previous EAP request found for state 0xfb1af5c9fb1def35, released from the list
(7) inner-eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) inner-eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(7) eap_mschapv2:   authenticate {
(7) mschap: Found Cleartext-Password, hashing to create NT-Password
(7) mschap: Found Cleartext-Password, hashing to create LM-Password
(7) mschap: Creating challenge hash with username: radius-test@nivo.im
(7) mschap: Client is using MS-CHAPv2
(7) mschap: Adding MS-CHAPv2 MPPE keys
(7)     [mschap] = ok
(7)   } # authenticate = ok
(7) MSCHAP Success
(7) inner-eap: Sending EAP Request (code 1) ID 8 length 51
(7) inner-eap: EAP session adding &reply:State = 0xfb1af5c9fa12ef35
(7)       [inner-eap] = handled
(7)     } # authenticate = handled
(7) } # server eduroam-inner
(7) Virtual server sending reply
(7)   Tunnel-Medium-Type := IEEE-802
(7)   Tunnel-Private-Group-Id := "100"
(7)   Tunnel-Type := VLAN
(7)   EAP-Message = 0x010800331a0307002e533d46364144364644453838443438353230413045393130313737313034313731423536373841383345
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xfb1af5c9fa12ef35157513a9c717c55d
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap:   Tunnel-Medium-Type := IEEE-802
(7) eap_peap:   Tunnel-Private-Group-Id := "100"
(7) eap_peap:   Tunnel-Type := VLAN
(7) eap_peap:   EAP-Message = 0x010800331a0307002e533d46364144364644453838443438353230413045393130313737313034313731423536373841383345
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0xfb1af5c9fa12ef35157513a9c717c55d
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap:   Tunnel-Medium-Type := IEEE-802
(7) eap_peap:   Tunnel-Private-Group-Id := "100"
(7) eap_peap:   Tunnel-Type := VLAN
(7) eap_peap:   EAP-Message = 0x010800331a0307002e533d46364144364644453838443438353230413045393130313737313034313731423536373841383345
(7) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap:   State = 0xfb1af5c9fa12ef35157513a9c717c55d
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 8 length 82
(7) eap: EAP session adding &reply:State = 0x83a5a6c584adbf32
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(7)   Post-Auth-Type Challenge {
(7)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(7)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(7)   } # Post-Auth-Type Challenge = noop
(7) session-state: Saving cached attributes
(7)   TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(7) Sent Access-Challenge Id 7 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(7)   EAP-Message = 0x01080052190017030300478cb26cdae48a74dfe5d6b80e6659a4d3cdcb60924d42d1fc17756a8df98c7fbb5df3415fd1878a16a90db9ffc87a8ca04f14a788159fda58a88d3228bfc710f8ada09e0dc86143
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0x83a5a6c584adbf3297f8fb882007e6d8
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 8 from 127.0.0.1:45195 to 127.0.0.1:1812 length 181
(8)   User-Name = "anonymous@nivo.im"
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   EAP-Message = 0x020800251900170303001ad555a9d7a5232c1cf57207ad5a3a2db4faaf3ffab6463939dc09
(8)   State = 0x83a5a6c584adbf3297f8fb882007e6d8
(8)   Message-Authenticator = 0x685a6a0787c917d31df8b3010a666400
(8) Restoring &session-state
(8)   &session-state:TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(8) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(8)   authorize {
(8)     policy split_username_nai {
(8)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(8)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(8)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(8)         update request {
(8)           EXPAND %{1}
(8)              --> anonymous
(8)           &Stripped-User-Name := anonymous
(8)           EXPAND %{3}
(8)              --> nivo.im
(8)           &Stripped-User-Domain = nivo.im
(8)         } # update request = noop
(8)         [updated] = updated
(8)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(8)       ... skipping else: Preceding "if" was taken
(8)     } # policy split_username_nai = updated
(8)     if (noop || !&Stripped-User-Domain) {
(8)     if (noop || !&Stripped-User-Domain)  -> FALSE
(8)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(8)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(8) eap: Peer sent EAP Response (code 2) ID 8 length 37
(8) eap: Continuing tunnel setup
(8)     [eap] = ok
(8)   } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(8)   authenticate {
(8) eap: Expiring EAP session with state 0x83a5a6c584adbf32
(8) eap: Finished EAP session with state 0x83a5a6c584adbf32
(8) eap: Previous EAP request found for state 0x83a5a6c584adbf32, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established.  Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap:   EAP-Message = 0x020800061a03
(8) eap_peap: Setting User-Name to radius-test@nivo.im
(8) eap_peap: Sending tunneled request to eduroam-inner
(8) eap_peap:   EAP-Message = 0x020800061a03
(8) eap_peap:   FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap:   User-Name = "radius-test@nivo.im"
(8) eap_peap:   State = 0xfb1af5c9fa12ef35157513a9c717c55d
(8) eap_peap:   NAS-IP-Address = 127.0.0.1
(8) eap_peap:   Calling-Station-Id = "02-00-00-00-00-01"
(8) eap_peap:   Framed-MTU = 1400
(8) eap_peap:   NAS-Port-Type = Wireless-802.11
(8) eap_peap:   Service-Type = Framed-User
(8) eap_peap:   Connect-Info = "CONNECT 11Mbps 802.11b"
(8) Virtual server eduroam-inner received request
(8)   EAP-Message = 0x020800061a03
(8)   FreeRADIUS-Proxied-To = 127.0.0.1
(8)   User-Name = "radius-test@nivo.im"
(8)   State = 0xfb1af5c9fa12ef35157513a9c717c55d
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8) server eduroam-inner {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(8)     authorize {
(8)       policy split_username_nai {
(8)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(8)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(8)         if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(8)           update request {
(8)             EXPAND %{1}
(8)                --> radius-test
(8)             &Stripped-User-Name := radius-test
(8)             EXPAND %{3}
(8)                --> nivo.im
(8)             &Stripped-User-Domain = nivo.im
(8)           } # update request = noop
(8)           [updated] = updated
(8)         } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(8)         ... skipping else: Preceding "if" was taken
(8)       } # policy split_username_nai = updated
(8)       if (noop || (&Stripped-User-Domain &&         (&outer.Stripped-User-Domain != &Stripped-User-Domain))) {
(8)       if (noop || (&Stripped-User-Domain &&         (&outer.Stripped-User-Domain != &Stripped-User-Domain)))  -> FALSE
(8) inner-eap: Peer sent EAP Response (code 2) ID 8 length 6
(8) inner-eap: No EAP Start, assuming it's an on-going EAP conversation
(8)       [inner-eap] = updated
rlm_ldap (ldap): Reserved connection (3)
(8) ldap: EXPAND (nivoUserName=%{%{Stripped-User-Name}:-%{User-Name}})
(8) ldap:    --> (nivoUserName=radius-test)
(8) ldap: Performing search in "ou=identities,o=vault" with filter "(nivoUserName=radius-test)", scope "sub"
(8) ldap: Waiting for search result...
(8) ldap: User object found at DN "cn=radius-test,ou=guests,ou=identities,o=vault"
(8) ldap: Added eDirectory password
(8) ldap: Binding as user for eDirectory authorization checks
(8) ldap: Waiting for bind result...
(8) ldap: Bind successful
(8) ldap: Bind as user 'cn=radius-test,ou=guests,ou=identities,o=vault' was successful
(8) ldap: Waiting for bind result...
(8) ldap: Bind successful
(8) ldap: Performing search in "cn=default,ou=profiles,ou=radius,o=config" with filter "(objectclass=nivoRadiusProfile)", scope "base"
(8) ldap: Waiting for search result...
(8) ldap: Processing profile attributes
(8) ldap: Tunnel-Medium-Type := IEEE-802
(8) ldap: Tunnel-Private-Group-Id := 100
(8) ldap: Tunnel-Type := VLAN
(8) ldap: Processing user attributes
rlm_ldap (ldap): Released connection (3)
(8)       [ldap] = updated
(8)       update {
rlm_ldap (ldap): Reserved connection (4)
(8)         Performing search in "ou=groups,o=vault" with filter "(&(member=cn\3dradius-test\2cou\3dguests\2cou\3didentities\2co\3dvault)(nivoRadiusProfileDN=*))", scope "one"
(8)         Waiting for search result...
(8)         Search returned no results
rlm_ldap (ldap): Released connection (4)
(8)         EXPAND %{ldap:ldap:///ou=groups,o=vault?nivoRadiusProfileDN?one?(&(member=%{control:Ldap-UserDN})(nivoRadiusProfileDN=*))}
(8)            -->
(8)         User-Profile :=
(8)       } # update = noop
(8) pap: WARNING: Auth-Type already set.  Not setting to PAP
(8)       [pap] = noop
(8)       [mschap] = noop
(8)     } # authorize = updated
(8)   Found Auth-Type = inner-eap
(8)   # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(8)     authenticate {
(8) inner-eap: Expiring EAP session with state 0xfb1af5c9fa12ef35
(8) inner-eap: Finished EAP session with state 0xfb1af5c9fa12ef35
(8) inner-eap: Previous EAP request found for state 0xfb1af5c9fa12ef35, released from the list
(8) inner-eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) inner-eap: Calling submodule eap_mschapv2 to process data
(8) inner-eap: Sending EAP Success (code 3) ID 8 length 4
(8) inner-eap: Freeing handler
(8)       [inner-eap] = ok
(8)     } # authenticate = ok
(8)   # Executing section post-auth from file /etc/raddb/sites-enabled/nivo-eduroam-inner
(8)     post-auth {
(8)       if (&User-Profile =~ /^cn=([^,]+).*$/) {
(8)       if (&User-Profile =~ /^cn=([^,]+).*$/)  -> FALSE
(8)       if (&reply:Tunnel-Private-Group-ID) {
(8)       if (&reply:Tunnel-Private-Group-ID)  -> TRUE
(8)       if (&reply:Tunnel-Private-Group-ID)  {
(8)         update reply {
(8)           EXPAND v=%{reply:Tunnel-Private-Group-ID},t=%{reply:Tunnel-Type},m=%{reply:Tunnel-Medium-Type}
(8)              --> v=100,t=VLAN,m=IEEE-802
(8)           Cached-Session-Policy := v=100,t=VLAN,m=IEEE-802
(8)         } # update reply = noop
(8)       } # if (&reply:Tunnel-Private-Group-ID)  = noop
(8)     } # post-auth = noop
(8) } # server eduroam-inner
(8) Virtual server sending reply
(8)   Tunnel-Medium-Type := IEEE-802
(8)   Tunnel-Private-Group-Id := "100"
(8)   Tunnel-Type := VLAN
(8)   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8)   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8)   MS-MPPE-Send-Key = 0x030d3b1fa5ef089ee301c78f5f1f581d
(8)   MS-MPPE-Recv-Key = 0x4c21e4dcd91f8e5070903fe456cf030f
(8)   EAP-Message = 0x03080004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   Stripped-User-Name := "radius-test"
(8)   Cached-Session-Policy := "v=100,t=VLAN,m=IEEE-802"
(8) eap_peap: Got tunneled reply code 2
(8) eap_peap:   Tunnel-Medium-Type := IEEE-802
(8) eap_peap:   Tunnel-Private-Group-Id := "100"
(8) eap_peap:   Tunnel-Type := VLAN
(8) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap:   MS-MPPE-Send-Key = 0x030d3b1fa5ef089ee301c78f5f1f581d
(8) eap_peap:   MS-MPPE-Recv-Key = 0x4c21e4dcd91f8e5070903fe456cf030f
(8) eap_peap:   EAP-Message = 0x03080004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   Stripped-User-Name := "radius-test"
(8) eap_peap:   Cached-Session-Policy := "v=100,t=VLAN,m=IEEE-802"
(8) eap_peap: Got tunneled reply RADIUS code 2
(8) eap_peap:   Tunnel-Medium-Type := IEEE-802
(8) eap_peap:   Tunnel-Private-Group-Id := "100"
(8) eap_peap:   Tunnel-Type := VLAN
(8) eap_peap:   MS-MPPE-Encryption-Policy = Encryption-Allowed
(8) eap_peap:   MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(8) eap_peap:   MS-MPPE-Send-Key = 0x030d3b1fa5ef089ee301c78f5f1f581d
(8) eap_peap:   MS-MPPE-Recv-Key = 0x4c21e4dcd91f8e5070903fe456cf030f
(8) eap_peap:   EAP-Message = 0x03080004
(8) eap_peap:   Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap:   Stripped-User-Name := "radius-test"
(8) eap_peap:   Cached-Session-Policy := "v=100,t=VLAN,m=IEEE-802"
(8) eap_peap: Tunneled authentication was successful
(8) eap_peap: SUCCESS
(8) eap: Sending EAP Request (code 1) ID 9 length 46
(8) eap: EAP session adding &reply:State = 0x83a5a6c58bacbf32
(8)     [eap] = handled
(8)   } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(8)   Post-Auth-Type Challenge {
(8)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(8)     if (&reply:Cached-Session-Policy && &reply:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(8)   } # Post-Auth-Type Challenge = noop
(8) session-state: Saving cached attributes
(8)   TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(8) Sent Access-Challenge Id 8 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(8)   EAP-Message = 0x0109002e190017030300238cb26cdae48a74e021f3e5676aa48cab90be1b096db2d4e59ba183040d89daedc06f22
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8)   State = 0x83a5a6c58bacbf3297f8fb882007e6d8
(8) Finished request
Waking up in 4.8 seconds.
(9) Received Access-Request Id 9 from 127.0.0.1:45195 to 127.0.0.1:1812 length 190
(9)   User-Name = "anonymous@nivo.im"
(9)   NAS-IP-Address = 127.0.0.1
(9)   Calling-Station-Id = "02-00-00-00-00-01"
(9)   Framed-MTU = 1400
(9)   NAS-Port-Type = Wireless-802.11
(9)   Service-Type = Framed-User
(9)   Connect-Info = "CONNECT 11Mbps 802.11b"
(9)   EAP-Message = 0x0209002e19001703030023d555a9d7a5232c1df98262637e77c14e4294e91bbf98b6af39f71f4df273d5b0841a0f
(9)   State = 0x83a5a6c58bacbf3297f8fb882007e6d8
(9)   Message-Authenticator = 0x437a157bbe6995fae1e0a98bbed98f44
(9) Restoring &session-state
(9)   &session-state:TLS-Cache-Filename = "/var/log/radius/tlscache/2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d.asn1"
(9) # Executing section authorize from file /etc/raddb/sites-enabled/nivo-eduroam
(9)   authorize {
(9)     policy split_username_nai {
(9)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/)) {
(9)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  -> TRUE
(9)       if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  {
(9)         update request {
(9)           EXPAND %{1}
(9)              --> anonymous
(9)           &Stripped-User-Name := anonymous
(9)           EXPAND %{3}
(9)              --> nivo.im
(9)           &Stripped-User-Domain = nivo.im
(9)         } # update request = noop
(9)         [updated] = updated
(9)       } # if (&User-Name && (&User-Name =~ /^([^@]*)(@([-[:alnum:]]+\.[-[:alnum:].]+))?$/))  = updated
(9)       ... skipping else: Preceding "if" was taken
(9)     } # policy split_username_nai = updated
(9)     if (noop || !&Stripped-User-Domain) {
(9)     if (noop || !&Stripped-User-Domain)  -> FALSE
(9)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/) {
(9)     if (&Stripped-User-Domain !~ /[Nn]ivo\.im/)  -> FALSE
(9) eap: Peer sent EAP Response (code 2) ID 9 length 46
(9) eap: Continuing tunnel setup
(9)     [eap] = ok
(9)   } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/raddb/sites-enabled/nivo-eduroam
(9)   authenticate {
(9) eap: Expiring EAP session with state 0x83a5a6c58bacbf32
(9) eap: Finished EAP session with state 0x83a5a6c58bacbf32
(9) eap: Previous EAP request found for state 0x83a5a6c58bacbf32, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established.  Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv success
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: Success
(9) eap_peap:     caching Stripped-User-Name := "anonymous"
(9) eap_peap:     caching Stripped-User-Domain = "nivo.im"
(9) eap_peap: Saving session 2dca13077445f03bdd2011f69c2b973b298c6cb909dd614d917d14454c8b154d in the disk cache
(9) eap: Sending EAP Success (code 3) ID 9 length 4
(9) eap: Freeing handler
tls: Freeing cached session VPs
(9)     [eap] = ok
(9)   } # authenticate = ok
(9) # Executing section post-auth from file /etc/raddb/sites-enabled/nivo-eduroam
(9)   post-auth {
(9)     if (&control:Proxy-To-Realm && &control:Proxy-To-Realm == 'eduroam_flr') {
(9)     if (&control:Proxy-To-Realm && &control:Proxy-To-Realm == 'eduroam_flr')  -> FALSE
(9)     if (&session-state:Stripped-User-Name) {
(9)     if (&session-state:Stripped-User-Name)  -> FALSE
(9)     if (&session-state:Cached-Session-Policy && &session-state:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/) {
(9)     if (&session-state:Cached-Session-Policy && &session-state:Cached-Session-Policy =~ /v=(.+),t=(.+),m=(.+)/)  -> FALSE
(9) linelog_send_accept: EXPAND action = Send-Accept, %{pairs:reply:}
(9) linelog_send_accept:    --> action = Send-Accept, MS-MPPE-Recv-Key = 0x23263892d14c397f30d373067ad29f8c673a19bd0fa42a3e3b74f89cf3fa1f58, MS-MPPE-Send-Key = 0x199553d51fbc32a32a4fcd3edec9f0f0a59836cca6798cd552a9baae611e7899, EAP-MSK = 0x23263892d14c397f30d373067ad29f8c673a19bd0fa42a3e3b74f89cf3fa1f58199553d51fbc32a32a4fcd3edec9f0f0a59836cca6798cd552a9baae611e7899, EAP-EMSK = 0xec548a61ce6133e7a67ecdc37eab50d314b44fbe025f3e8a08288a5da4d62662408e8b8fb0eb65efff3af51b1c0635190555e44e6c4491544f4a57a4b3e3fbd0, EAP-Session-Id = 0x19ce8317d9ecb7a6bf3c59be1461cc65455c708fd520665680cbccbdec4085cbcfa4f2f123d577a5ab1475eb713c7ae79668b085624dc262ebfb3a20c15d7e76d1, EAP-Message = 0x03090004, Message-Authenticator = 0x00000000000000000000000000000000, Stripped-User-Name = "anonymous"
(9)     [linelog_send_accept] = ok
(9)   } # post-auth = ok
(9) Sent Access-Accept Id 9 from 127.0.0.1:1812 to 127.0.0.1:45195 length 0
(9)   MS-MPPE-Recv-Key = 0x23263892d14c397f30d373067ad29f8c673a19bd0fa42a3e3b74f89cf3fa1f58
(9)   MS-MPPE-Send-Key = 0x199553d51fbc32a32a4fcd3edec9f0f0a59836cca6798cd552a9baae611e7899
(9)   EAP-Message = 0x03090004
(9)   Message-Authenticator = 0x00000000000000000000000000000000
(9) Finished request
Waking up in 4.8 seconds.
(0) Cleaning up request packet ID 0 with timestamp +25
(1) Cleaning up request packet ID 1 with timestamp +25
(2) Cleaning up request packet ID 2 with timestamp +25
(3) Cleaning up request packet ID 3 with timestamp +25
(4) Cleaning up request packet ID 4 with timestamp +25
(5) Cleaning up request packet ID 5 with timestamp +25
(6) Cleaning up request packet ID 6 with timestamp +25
(7) Cleaning up request packet ID 7 with timestamp +25
(8) Cleaning up request packet ID 8 with timestamp +25
(9) Cleaning up request packet ID 9 with timestamp +25
Ready to process requests

WPA-EAP configuration with LDAP backend calls ldap module twice

Mark van Reijn

Alan DeKok

Mark van Reijn

Brian Julin

Mark van Reijn

Alan DeKok

tags

participants (3)