Simple Accounting 'radrelay' functionality - Version 2.1.6 - Freeradius-Users

31 Aug 2009

      Hi.

FreeRadius 2.1.6 running in Redhat Linux AS5.3

We are upgrading from ancient radius servers to current, and discovered the
radrelay program no longer exists.

Despite my best efforts, I have failed to configure relaying correctly.  I
think I am including below the required changes.  I hope someone that has
done this successfully can easily see where I went wrong.  (Thanks in
advance!)

We have two (2) radius servers (Redhat Linux AS5), radius-a and radius-b and
wish to replicate
accounting info between them.

(Previously radius-1 ran radrelay to radius-2 and radius-2 ran radrelay to
radius-1 -- just to be clear)

For my testing, I am attempting to get radius-a to replicate to radius-b
(Get
things working in 1 direction first.)

I have created a symbolic link in /usr/local/etc/raddb/sites-enabled/ to
/usr/local/etc/raddb/sites-available/copy-acct-to-home-server

I have ADDED the following  to (and REMOVED NOTHING FROM) the
proxy.conf file,

home_server radius-b {
        type = acct
        ipaddr = 192.168.1.226
        port = 1813
        secret = booboo
        require_message_authenticator = no
        response_window = 20
        zombie_period = 40
        revive_interval = 120
        status_check = status-server
        check_interval = 30
        num_answers_to_alive = 3
        coa {
                # Initial retransmit interval: 1..5
                irt = 2
                # Maximum Retransmit Timeout: 1..30 (0 == no maximum)
                mrt = 16
                 # Maximum Retransmit Count: 1..20 (0 == retransmit forever)
                mrc = 5
                # Maximum Retransmit Duration: 5..60
                mrd = 30
        }
}

home_server_pool my_acct_relay {
        type = fail-over
        home_server = radius-b
}

realm relay_realm {
        acct_pool = my_acct_relay
}

~~~~~~~
I have modified the file
/usr/local/etc/raddb/sites-enabled/copy-to-home-server as follows,

server copy-acct-to-home-server {
        listen {
                type = detail
#CEC            filename = ${radacctdir}/detail
                filename = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
                load_factor = 10
        }

        preacct {
#CEC Added this from web searches...
                update control {
                        Proxy-To-Realm := relay_realm
                }
                preprocess
                suffix
                files
        }

~~~~~~~

Accounting packets are being sent from 192.168.1.101 to radius-a and are
logged.
No IP traffic has been detected from from radius-a to radius-b.
The detail file I expect is being updated.
No log files of the form,
${radacctdir}/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d
and ${radacctdir}/%{Client-IP-Address}/post-proxy-detail-%Y%m%d
have been created, although I thought they should have been.

The startup log has no obvious errors I can see,

FreeRADIUS Version 2.1.6, for host x86_64-unknown-linux-gnu, built on Aug 28
2009 at 09:39:34
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/modules/
including configuration file /usr/local/etc/raddb/modules/perl
including configuration file /usr/local/etc/raddb/modules/pap
including configuration file /usr/local/etc/raddb/modules/sradutmp
including configuration file /usr/local/etc/raddb/modules/counter
including configuration file /usr/local/etc/raddb/modules/policy
including configuration file /usr/local/etc/raddb/modules/passwd
including configuration file /usr/local/etc/raddb/modules/exec
including configuration file /usr/local/etc/raddb/modules/expiration
including configuration file /usr/local/etc/raddb/modules/digest
including configuration file /usr/local/etc/raddb/modules/mac2ip
including configuration file /usr/local/etc/raddb/modules/mschap
including configuration file /usr/local/etc/raddb/modules/realm
including configuration file /usr/local/etc/raddb/modules/mac2vlan
including configuration file /usr/local/etc/raddb/modules/attr_filter
including configuration file /usr/local/etc/raddb/modules/logintime
including configuration file
/usr/local/etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /usr/local/etc/raddb/modules/radutmp
including configuration file /usr/local/etc/raddb/modules/sql_log
including configuration file /usr/local/etc/raddb/modules/linelog
including configuration file /usr/local/etc/raddb/modules/smbpasswd
including configuration file /usr/local/etc/raddb/modules/smsotp
including configuration file /usr/local/etc/raddb/modules/otp
including configuration file /usr/local/etc/raddb/modules/krb5
including configuration file /usr/local/etc/raddb/modules/etc_group
including configuration file /usr/local/etc/raddb/modules/inner-eap
including configuration file /usr/local/etc/raddb/modules/detail.log
including configuration file /usr/local/etc/raddb/modules/ldap
including configuration file /usr/local/etc/raddb/modules/ippool
including configuration file /usr/local/etc/raddb/modules/wimax
including configuration file /usr/local/etc/raddb/modules/always
including configuration file /usr/local/etc/raddb/modules/files
including configuration file /usr/local/etc/raddb/modules/acct_unique
including configuration file /usr/local/etc/raddb/modules/preprocess
including configuration file /usr/local/etc/raddb/modules/detail.example.com
including configuration file /usr/local/etc/raddb/modules/pam
including configuration file /usr/local/etc/raddb/modules/chap
including configuration file /usr/local/etc/raddb/modules/echo
including configuration file /usr/local/etc/raddb/modules/unix
including configuration file /usr/local/etc/raddb/modules/expr
including configuration file /usr/local/etc/raddb/modules/detail
including configuration file /usr/local/etc/raddb/modules/checkval
including configuration file /usr/local/etc/raddb/modules/attr_rewrite
including configuration file /usr/local/etc/raddb/eap.conf
including configuration file /usr/local/etc/raddb/policy.conf
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
including configuration file
/usr/local/etc/raddb/sites-enabled/copy-acct-to-home-server
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file
/usr/local/etc/raddb/sites-enabled/control-socket
group = radiusd
user = radiusd
including dictionary file /usr/local/etc/raddb/dictionary
main {
        prefix = "/usr/local"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        libdir = "/usr/local/lib"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        allow_core_dumps = no
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = "testing123"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = no
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 home_server radius-b {
        ipaddr = 192.168.1.226
        port = 1813
        type = "acct"
        secret = "booboo"
        response_window = 20
        max_outstanding = 65536
        require_message_authenticator = no
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        num_answers_to_alive = 3
        num_pings_to_alive = 3
        revive_interval = 120
        status_check_timeout = 4
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
 }
 home_server_pool my_acct_relay {
        type = fail-over
        home_server = radius-b
 }
 realm relay_realm {
        acct_pool = my_acct_relay
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = "testing123"
        shortname = "localhost"
        nastype = "other"
 }
 client 65.119.114.4 {
        require_message_authenticator = no
        secret = "s3t6r!synv3rs3"
        shortname = "114.4"
 }
 client 65.119.115.2 {
        require_message_authenticator = no
        secret = "s3t6r!synv3rs3"
        shortname = "115.2"
 }
 client 65.119.115.7 {
        require_message_authenticator = no
        secret = "s3t6r!synv3rs3"
        shortname = "115.7"
 }
 client 172.16.16.14 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "16.14"
 }
 client 172.16.17.20 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "17.20"
 }
 client 192.168.1.100 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "BRAS_100"
        nastype = "juniper"
 }
 client 192.168.1.101 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "BRAS_100"
        nastype = "juniper"
 }
 client 199.0.80.1 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "BRAS_100"
        nastype = "juniper"
 }
 client 192.168.1.103 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "radius-1"
 }
 client 192.168.1.104 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "radius-2"
 }
 client 192.168.1.225 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "radius-a"
 }
 client 192.168.1.226 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "radius-b"
 }
 client 206.48.23.170 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "23.170"
 }
 client 209.88.128.5 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "128.5"
 }
 client 209.88.128.6 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "128.6"
 }
 client 209.88.128.7 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "128.7"
 }
 client 209.88.128.10 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "128.10"
 }
 client 209.88.128.73 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "access1"
 }
 client 209.88.128.74 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "access2"
        nastype = "cisco"
        login = ""
        password = "setarsnmp"
 }
 client 209.88.128.75 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "access3"
 }
 client 209.88.128.76 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "access4"
 }
 client 209.88.128.77 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "access5"
 }
 client 209.88.128.78 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "access6"
 }
 client 209.88.128.131 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "128.131"
 }
 client 209.88.129.61 {
        require_message_authenticator = no
        secret = "booboo"
        shortname = "129.61"
 }
radiusd: #### Instantiating modules ####
 instantiate {
 Module: Linked to module rlm_exec
 Module: Instantiating exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
  }
 Module: Linked to module rlm_expr
 Module: Instantiating expr
 Module: Linked to module rlm_expiration
 Module: Instantiating expiration
  expiration {
        reply-message = "Password Has Expired  "
  }
 Module: Linked to module rlm_logintime
 Module: Instantiating logintime
  logintime {
        reply-message = "You are calling outside your allowed timespan  "
        minimum-timeout = 60
  }
 }
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Linked to module rlm_pap
 Module: Instantiating pap
  pap {
        encryption_scheme = "auto"
        auto_header = no
  }
 Module: Linked to module rlm_chap
 Module: Instantiating chap
 Module: Linked to module rlm_mschap
 Module: Instantiating mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = no
  }
 Module: Linked to module rlm_unix
 Module: Instantiating unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
 Module: Linked to module rlm_eap
 Module: Instantiating eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 2048
  }
 Module: Linked to sub-module rlm_eap_md5
 Module: Instantiating eap-md5
 Module: Linked to sub-module rlm_eap_leap
 Module: Instantiating eap-leap
 Module: Linked to sub-module rlm_eap_gtc
 Module: Instantiating eap-gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
 Module: Linked to sub-module rlm_eap_tls
 Module: Instantiating eap-tls
   tls {
        rsa_key_exchange = no
        dh_key_exchange = yes
        rsa_key_length = 512
        dh_key_length = 512
        verify_depth = 0
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/server.pem"
        certificate_file = "/usr/local/etc/raddb/certs/server.pem"
        CA_file = "/usr/local/etc/raddb/certs/ca.pem"
        private_key_password = "whatever"
        dh_file = "/usr/local/etc/raddb/certs/dh"
        random_file = "/usr/local/etc/raddb/certs/random"
        fragment_size = 1024
        include_length = yes
        check_crl = no
        cipher_list = "DEFAULT"
        make_cert_command = "/usr/local/etc/raddb/certs/bootstrap"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
   }
 Module: Linked to sub-module rlm_eap_ttls
 Module: Instantiating eap-ttls
   ttls {
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
   }
 Module: Linked to sub-module rlm_eap_peap
 Module: Instantiating eap-peap
   peap {
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
   }
 Module: Linked to sub-module rlm_eap_mschapv2
 Module: Instantiating eap-mschapv2
   mschapv2 {
        with_ntdomain_hack = no
   }
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_realm
 Module: Instantiating suffix
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
 Module: Linked to module rlm_files
 Module: Instantiating files
  files {
        usersfile = "/usr/local/etc/raddb/users"
        acctusersfile = "/usr/local/etc/raddb/acct_users"
        preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
        compat = "no"
  }
 Module: Checking session {...} for more modules to load
 Module: Linked to module rlm_radutmp
 Module: Instantiating radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        perm = 384
        callerid = yes
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 Module: Linked to module rlm_attr_filter
 Module: Instantiating attr_filter.access_reject
  attr_filter attr_filter.access_reject {
        attrsfile = "/usr/local/etc/raddb/attrs.access_reject"
        key = "%{User-Name}"
  }
 } # modules
} # server
server copy-acct-to-home-server {
 modules {
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_preprocess
 Module: Instantiating preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/huntgroups"
        hints = "/usr/local/etc/raddb/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
 Module: Checking accounting {...} for more modules to load
 Module: Linked to module rlm_always
 Module: Instantiating ok
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
 Module: Checking pre-proxy {...} for more modules to load
 Module: Linked to module rlm_detail
 Module: Instantiating pre_proxy_log
  detail pre_proxy_log {
        detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Checking post-proxy {...} for more modules to load
 Module: Instantiating post_proxy_log
  detail post_proxy_log {
        detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/post-proxy-detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 } # modules
} # server
server {
 modules {
 Module: Checking authenticate {...} for more modules to load
 Module: Checking authorize {...} for more modules to load
 Module: Linked to module rlm_attr_rewrite
 Module: Instantiating hexconvert
  attr_rewrite hexconvert {
        attribute = "User-Name"
        searchfor = "^.*@ftth.aw$"
        searchin = "packet"
        replacewith = "%{exec:/usr/local/sbin/hexconvert -lX %{User-Name} }"
        append = no
        ignore_case = no
        new_attribute = no
        max_matches = 1
  }
 Module: Checking preacct {...} for more modules to load
 Module: Linked to module rlm_acct_unique
 Module: Instantiating acct_unique
  acct_unique {
        key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
  }
 Module: Instantiating sanenasport
  attr_rewrite sanenasport {
        attribute = "NAS-Port"
        searchfor = "^.*"
        searchin = "packet"
        replacewith = "%{Acct-Session-Id}"
        append = no
        ignore_case = no
        new_attribute = no
        max_matches = 1
  }
 Module: Checking accounting {...} for more modules to load
 Module: Instantiating detail
  detail {
        detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        header = "%t"
        detailperm = 384
        dirperm = 493
        locking = no
        log_packet_header = no
  }
 Module: Instantiating nameonly
  attr_rewrite nameonly {
        attribute = "User-Name"
        searchfor = "@.*$"
        searchin = "packet"
        replacewith = ""
        append = no
        ignore_case = no
        new_attribute = no
        max_matches = 1
  }
 Module: Instantiating attr_filter.accounting_response
  attr_filter attr_filter.accounting_response {
        attrsfile = "/usr/local/etc/raddb/attrs.accounting_response"
        key = "%{User-Name}"

  }
 Module: Checking session {...} for more modules to load
 Module: Checking post-proxy {...} for more modules to load
 Module: Checking post-auth {...} for more modules to load
 } # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
listen {
        type = "control"
 listen {
        socket = "/var/run/radiusd/radiusd.sock"
 }
}
listen {
        type = "detail"
  listen {
        filename =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
        load_factor = 10
        poll_interval = 1
        retry_interval = 30
  }
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on detail file
/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d as server
copy-acct-to-home-server
Listening on proxy address * port 1814
Waking up in 0.9 seconds.
rad_recv: Accounting-Request packet from host 192.168.1.101 port 50125,
id=70, length=245
        Acct-Status-Type = Start
        User-Name = "nathanjoe@comfort"
        Event-Timestamp = "Aug 31 2009 13:40:56 AST"
        Acct-Delay-Time = 20
        NAS-Identifier = "ERX-2"
        Acct-Session-Id = "0314462397"
        NAS-IP-Address = 192.168.1.101
        Service-Type = Framed-User
        Framed-Protocol = PPP
        Framed-Compression = None
        ERX-Pppoe-Description = "pppoe 00:90:d0:63:df:79"
        Framed-IP-Address = 201.229.46.219
        Framed-IP-Netmask = 255.255.255.255
        ERX-Ingress-Policy-Name = "COMFORT_UP"
        ERX-Egress-Policy-Name = "COMFORT_DOWN"
        Calling-Station-Id = "ERX-08000000269"
        NAS-Port-Type = Ethernet
        NAS-Port = 2147483917
        NAS-Port-Id = "GigabitEthernet 8/0.269:269"
        Acct-Authentic = RADIUS
+- entering group preacct {...}
++[preprocess] returns ok
[acct_unique] Hashing 'NAS-Port = 2147483917,Client-IP-Address =
192.168.1.101,NAS-IP-Address = 192.168.1.101,Acct-Session-Id =
"0314462397",User-Name = "nathanjoe@comfort"'
[acct_unique] Acct-Unique-Session-ID = "526c378c1dcaa12d".
++[acct_unique] returns ok
[sanenasport]   expand: ^.* -> ^.*
[sanenasport]   expand: %{Acct-Session-Id} -> 0314462397
sanenasport: Changed value for attribute NAS-Port from '?' to '0314462397'
sanenasport: Could not find value pair for attribute NAS-Port
++[sanenasport] returns ok
[hexconvert]    expand: ^.*@ftth.aw$ -> ^.*@ftth.aw$
hexconvert: Does not match: User-Name = nathanjoe@comfort
++[hexconvert] returns ok
[suffix] Looking up realm "comfort" for User-Name = "nathanjoe@comfort"
[suffix] No such realm "comfort"
++[suffix] returns noop
++[files] returns noop
+- entering group accounting {...}
[detail]        expand:
/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d ->
/var/log/radius/radacct/192.168.1.101/detail-20090831
[detail] /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands
to /var/log/radius/radacct/192.168.1.101/detail-20090831
[detail]        expand: %t -> Mon Aug 31 13:41:10 2009
++[detail] returns ok
++[unix] returns ok
[nameonly]      expand: @.*$ -> @.*$
nameonly: Changed value for attribute User-Name from 'nathanjoe@comfort' to
'nathanjoe'
++[nameonly] returns ok
[radutmp]       expand: /var/log/radius/radutmp -> /var/log/radius/radutmp
[radutmp]       expand: %{User-Name} -> nathanjoe
++[radutmp] returns ok
[attr_filter.accounting_response]       expand: %{User-Name} -> nathanjoe
 attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] returns updated
Sending Accounting-Response of id 70 to 192.168.1.101 port 50125
Finished request 0.
Cleaning up request 0 ID 70 with timestamp +1
Going to the next request
Waking up in 0.3 seconds.
__________ Information from ESET Smart Security, version of virus signature

__________ Information from ESET Smart Security, version of virus signature database 4385 (20090831) __________

The message was checked by ESET Smart Security.

http://www.eset.com

Simple Accounting 'radrelay' functionality - Version 2.1.6

Craig Campbell

Ivan Kalik

Craig Campbell

Alan DeKok

Craig Campbell

tags

participants (3)