I just use Framed-Filter-Id = "profilename" in the reply. When you added: update reply { WiMAX-FA-RK-Key = 0x00 WiMAX-MSK = "%{reply:EAP-MSK}" Filter-Id = "Profile1" } That replies with only 1 filter ID. Take the Filter-Id out and keep it in the users file: cpe1@eads.com Cleartext-Password := "cpe1" Session-Timeout = 3600, Termination-Action = Radius-Request, Filter-Id = "Profile1" David -----Original Message----- From: Hahusseau, Thomas [mailto:thomas.hahusseau@cassidian.com] Sent: Wednesday, June 01, 2011 5:12 AM To: David Peterson-WirelessConnections; FreeRadius users mailing list Subject: RE: Freeradius + Alvarion 4Motion specify filter-id value in access-accept from value in user conf file ? Hello, My Wimax device require MPPE keys to be sent in access accept if I change that setting in module/wimax from no to yes the wimax don't connect anymore. My problem is not getting my Wimax device connected it's already done. My problem is that I want specific values of "Filter-Id" attribute sent in access-accept according to the user-name sent in access-request. Filter-ID = "Profile1" when user CPE1@eads.com is trying to connect. Filter-ID = "Profile2" when user CPE2@eads.com is trying to connect. Regards, Thomas PS : Uncomment "wimax" lines in site-enable and inner-tunnel conf files already done. -----Message d'origine----- De : freeradius-users-bounces+thomas.hahusseau=cassidian.com@lists.freeradius.org [mailto:freeradius-users-bounces+thomas.hahusseau=cassidian.com@lists.freera dius.org] De la part de David Peterson Envoyé : mardi 31 mai 2011 19:31 À : 'FreeRadius users mailing list' Objet : RE: Freeradius + Alvarion 4Motion specify filter-id valueinaccess-accept from value in user conf file ? Make sure you configure FR to delete the MPPE keys. This can be found in the /modules/wimax file. Set the value from No to Yes. As well, you need to configure the server to use the inner-tunnel. I would start from the default FR settings, uncomment the wimax entries you see in sites-available/default and sites-available/inner-tunnel, make the change in the /modules/wimax file and make sure your profile names match as this is case sensitive. David -----Original Message----- From: freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradius.or freeradius-users-bounces+g [mailto:freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradiu s.org] On Behalf Of Hahusseau, Thomas Sent: Tuesday, May 31, 2011 1:18 PM To: freeradius-users@lists.freeradius.org Subject: Freeradius + Alvarion 4Motion specify filter-id value inaccess-accept from value in user conf file ? Hello, I'm running latest version form Master Branch of Freeradius. I managed to connect an Alvarion CPE to an Alvarion 4M BS with Freeradius server as authenticator. Everything works well except that I directly specified in my /site-enable/default configuration file the value of "Filter-Id" attribute required by the base station. ----------- /site-enabled/default post-auth { exec update request { WiMAX-MN-NAI = "%{User-Name}" } update reply { WiMAX-FA-RK-Key = 0x00 WiMAX-MSK = "%{reply:EAP-MSK}" Filter-Id = "Profile1" } wimax Post-Auth-Type REJECT { # log failed authentications in SQL, too. # sql attr_filter.access_reject } } ----------- I would like to use different value of attribute "Filter-Id" for different users (specific QoS setting in Alvarion ASN-GW for each Filter-Id). I would like to use the "Filter-ID"'s value specified in my users conf file : ----------- users #standard customer cpe1@eads.com Cleartext-Password := "cpe1" Session-Timeout = 3600, Termination-Action = Radius-Request, Filter-Id = "Profile1" #VIP customer cpe2@eads.com Cleartext-Password := "cpe2" Session-Timeout = 3600, Termination-Action = Radius-Request, Filter-Id = "Profile2" ----------- I tried to use the same syntax as for WiMAX-MSK attribute: Filter-ID ="%{Filter-Id}" but it doesn't work (Filter-ID value in access-accept is empty). I googled "Filter-Id freeradius" and found nothing relevant. Is it possible to use Filter-ID value form users conf file in access-accept ? Here is an example on access-accept message with filter-id specified directly in site-enable/default conf file. ----------- radiusd -X (7) Found Auth-Type = ? (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) group authenticate { (7) - entering group authenticate {...} (7) eap : Request found, released from the list (7) eap : EAP/ttls (7) eap : processing type ttls (7) ttls : Authenticate (7) ttls : processing EAP-TLS (7) ttls : Received TLS ACK (7) ttls : Received TLS ACK (7) ttls : ACK handshake is finished (7) ttls : eaptls_verify returned 3 (7) ttls : eaptls_process returned 3 (7) ttls : Using saved attributes from the original Access-Accept (7) eap : Freeing handler (7) [eap] = ok (7) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (7) group post-auth { (7) - entering group post-auth {...} (7) [exec] = noop (7) update request { (7) expand: %{User-Name} -> {am=1}791d05915a25400ca9d1a3cb1a2c7ffa@eads.com (7) } # update request = noop (7) update reply { (7) expand: %{reply:EAP-MSK} -> 0x0473dcd65638bc4ef089945467f25e24f252b53f34e4d2f220d157c3d1192528cb185a0437 d0a641fd5434d28738eae8f013d4b0308662a0e1b365d8ad542ce0 (7) } # update reply = noop (7) wimax : MIP-RK = 0x9ec871a65c3033e03c0d77ed55a1517d4b7dbbbeb2d782bcf369635861e64925c5db13c362 86e2032c789ad6fe2c09cd21eda782a9a4758e9ce73f8f384c46b6 (7) wimax : MIP-SPI = bb9d949a (7) wimax : WARNING: WiMAX-IP-Technology not found in reply. (7) wimax : WARNING: Not calculating MN-HA keys (7) [wimax] = updated Sending Access-Accept of id 246 to 192.168.100.10 port 1812 MS-MPPE-Recv-Key = 0x0473dcd65638bc4ef089945467f25e24f252b53f34e4d2f220d157c3d1192528 MS-MPPE-Send-Key = 0xcb185a0437d0a641fd5434d28738eae8f013d4b0308662a0e1b365d8ad542ce0 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "{am=1}791d05915a25400ca9d1a3cb1a2c7ffa@eads.com" WiMAX-FA-RK-Key = 0xb37b0b5832687e02c31b94319b2ba3077479411f WiMAX-MSK = 0x0473dcd65638bc4ef089945467f25e24f252b53f34e4d2f220d157c3d1192528cb185a0437 d0a641fd5434d28738eae8f013d4b0308662a0e1b365d8ad542ce0 Filter-Id = "Profile1" WiMAX-FA-RK-SPI = 2593430971 (7) Finished request 7. ----------- Regards, Mr Thomas Hahusseau, Ingénieur réseau Cassidian (EADS) - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

I use Daloradius and MySQL but if memory serves it would be similar to this: Deg Cleartext-Password := "ge55ged" Service-Type = Callback-Login-User, Login-IP-Host = 0.0.0.0, Callback-Number = "9,5551212", Login-Service = Telnet, Framed-Filter-Id = "profile1" -----Original Message----- From: Hahusseau, Thomas [mailto:thomas.hahusseau@cassidian.com] Sent: Monday, June 06, 2011 12:39 PM To: David Peterson-WirelessConnections; FreeRadius users mailing list Subject: RE: Freeradius + Alvarion 4Motion specify filter-id value inaccess-accept from value in user conf file ? Hello, I tried using only "Framed-Filter-Id" and "Filter-Id" in users conf file and deleting the line Filter-Id = "Profile1" from my site-ennabled/default conf file but it doesn't work. When processing the post-authentication section it doesn't add atributes provided in users conf to the access-accept. I added the "files" line in post-authent section of default conf file (I suposed this way it parse the users conf file when processing the post authent section) but it doesn't work. Could you give me a sample of your site-ennabled/default conf file ? Here is the Radiusd -X output of my server : FreeRADIUS Version 3.0.0, for host i686-pc-linux-gnu, built on May 31 2011 at 08:06:19 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /usr/local/etc/raddb/radiusd.conf including configuration file /usr/local/etc/raddb/proxy.conf including configuration file /usr/local/etc/raddb/clients.conf including files in directory /usr/local/etc/raddb/modules/ including configuration file /usr/local/etc/raddb/modules/soh including configuration file /usr/local/etc/raddb/modules/acct_unique including configuration file /usr/local/etc/raddb/modules/preprocess including configuration file /usr/local/etc/raddb/modules/ntlm_auth including configuration file /usr/local/etc/raddb/modules/unix including configuration file /usr/local/etc/raddb/modules/exec including configuration file /usr/local/etc/raddb/modules/detail including configuration file /usr/local/etc/raddb/modules/perl including configuration file /usr/local/etc/raddb/modules/detail.log including configuration file /usr/local/etc/raddb/modules/attr_rewrite including configuration file /usr/local/etc/raddb/modules/redis including configuration file /usr/local/etc/raddb/modules/chap including configuration file /usr/local/etc/raddb/modules/radutmp including configuration file /usr/local/etc/raddb/modules/files including configuration file /usr/local/etc/raddb/modules/replicate including configuration file /usr/local/etc/raddb/modules/opendirectory including configuration file /usr/local/etc/raddb/modules/ldap including configuration file /usr/local/etc/raddb/modules/smbpasswd including configuration file /usr/local/etc/raddb/modules/inner-eap including configuration file /usr/local/etc/raddb/modules/otp including configuration file /usr/local/etc/raddb/modules/sradutmp including configuration file /usr/local/etc/raddb/modules/smsotp including configuration file /usr/local/etc/raddb/modules/mschap including configuration file /usr/local/etc/raddb/modules/pam including configuration file /usr/local/etc/raddb/modules/wimax including configuration file /usr/local/etc/raddb/modules/mac2ip including configuration file /usr/local/etc/raddb/modules/cui including configuration file /usr/local/etc/raddb/modules/echo including configuration file /usr/local/etc/raddb/modules/krb5 including configuration file /usr/local/etc/raddb/modules/expiration including configuration file /usr/local/etc/raddb/modules/eap including configuration file /usr/local/etc/raddb/modules/linelog including configuration file /usr/local/etc/raddb/modules/policy including configuration file /usr/local/etc/raddb/modules/realm including configuration file /usr/local/etc/raddb/modules/sql_log including configuration file /usr/local/etc/raddb/modules/always including configuration file /usr/local/etc/raddb/modules/sql including configuration file /usr/local/etc/raddb/sql/mysql/dialup.conf including configuration file /usr/local/etc/raddb/modules/sqlcounter_expire_on_login including configuration file /usr/local/etc/raddb/modules/etc_group including configuration file /usr/local/etc/raddb/modules/digest including configuration file /usr/local/etc/raddb/modules/mac2vlan including configuration file /usr/local/etc/raddb/modules/logintime including configuration file /usr/local/etc/raddb/modules/attr_filter including configuration file /usr/local/etc/raddb/modules/expr including configuration file /usr/local/etc/raddb/modules/rediswho including configuration file /usr/local/etc/raddb/modules/checkval including configuration file /usr/local/etc/raddb/modules/passwd including configuration file /usr/local/etc/raddb/modules/sqlippool including configuration file /usr/local/etc/raddb/sql/postgresql/ippool.conf including configuration file /usr/local/etc/raddb/modules/detail.example.com including configuration file /usr/local/etc/raddb/modules/ippool including configuration file /usr/local/etc/raddb/modules/counter including configuration file /usr/local/etc/raddb/modules/dynamic_clients including configuration file /usr/local/etc/raddb/modules/pap including configuration file /usr/local/etc/raddb/policy.conf including files in directory /usr/local/etc/raddb/sites-enabled/ including configuration file /usr/local/etc/raddb/sites-enabled/control-socket including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel including configuration file /usr/local/etc/raddb/sites-enabled/default main { security { allow_core_dumps = no } } including dictionary file /usr/local/etc/raddb/dictionary main { name = "radiusd" prefix = "/usr/local" localstatedir = "/usr/local/var" sbindir = "/usr/local/sbin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" proto = "*" max_connections = 16 } client 192.168.100.10 { require_message_authenticator = no secret = "wimaxeads" max_connections = 16 } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /usr/local/etc/raddb/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /usr/local/etc/raddb/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /usr/local/etc/raddb/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /usr/local/etc/raddb/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/etc/raddb/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /usr/local/etc/raddb/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /usr/local/etc/raddb/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /usr/local/etc/raddb/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no passchange { } allow_retry = yes } Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /usr/local/etc/raddb/modules/digest Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /usr/local/etc/raddb/modules/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /usr/local/etc/raddb/modules/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/usr/local/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/etc/raddb/certs/server.pem" certificate_file = "/usr/local/etc/raddb/certs/server.pem" CA_file = "/usr/local/etc/raddb/certs/ca.pem" private_key_password = "whatever" dh_file = "/usr/local/etc/raddb/certs/dh" random_file = "/usr/local/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/usr/local/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /usr/local/etc/raddb/modules/preprocess preprocess { huntgroups = "/usr/local/etc/raddb/huntgroups" hints = "/usr/local/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Linked to module rlm_wimax Module: Instantiating module "wimax" from file /usr/local/etc/raddb/modules/wimax wimax { delete_mppe_keys = no } Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /usr/local/etc/raddb/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /usr/local/etc/raddb/modules/files files { usersfile = "/usr/local/etc/raddb/users" acctusersfile = "/usr/local/etc/raddb/acct_users" preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" compat = "no" } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /usr/local/etc/raddb/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /usr/local/etc/raddb/modules/detail detail { detailfile = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src- IPv6-Address}}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /usr/local/etc/raddb/modules/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/usr/local/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/usr/local/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/usr/local/var/run/radiusd/radiusd.sock" } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /usr/local/var/run/radiusd/radiusd.sock Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Opening new proxy address * port 1814 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=87, length=161 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x02010018017b616d3d317d6370653440656164732e636f6d Message-Authenticator = 0xd4e62c828085e35dc5b8eab904862b64 NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 (0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (0) group authorize { (0) - entering group authorize {...} (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) [wimax] = ok (0) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (0) suffix : No such realm "eads.com" (0) [suffix] = noop (0) eap : EAP packet type response id 1 length 24 (0) eap : No EAP Start, assuming it's an on-going EAP conversation (0) [eap] = updated (0) [files] = noop (0) [expiration] = noop (0) [logintime] = noop (0) pap : WARNING! No "known good" password found for the user. Authentication may fail because of this. (0) [pap] = noop (0) Found Auth-Type = ? (0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (0) group authenticate { (0) - entering group authenticate {...} (0) eap : EAP Identity (0) eap : processing type md5 rlm_eap_md5: Issuing Challenge (0) [eap] = handled Sending Access-Challenge of id 87 to 192.168.100.10 port 1812 EAP-Message = 0x0102001604106254767f35e41ca8d379aa26b1844710 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac768388ae720233427f0cb1a81ea1 (0) Finished request 0. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=88, length=161 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x020200060315 Message-Authenticator = 0x968d21ad084bd80cb7fd2b7b91f77643 NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac768388ae720233427f0cb1a81ea1 (1) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (1) group authorize { (1) - entering group authorize {...} (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) [wimax] = ok (1) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (1) suffix : No such realm "eads.com" (1) [suffix] = noop (1) eap : EAP packet type response id 2 length 6 (1) eap : No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop (1) [expiration] = noop (1) [logintime] = noop (1) pap : WARNING! No "known good" password found for the user. Authentication may fail because of this. (1) [pap] = noop (1) Found Auth-Type = ? (1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (1) group authenticate { (1) - entering group authenticate {...} (1) eap : Request found, released from the list (1) eap : EAP NAK (1) eap : EAP-NAK asked for EAP-Type/ttls (1) eap : processing type tls (1) tls : Initiate (1) tls : Start returned 1 (1) [eap] = handled Sending Access-Challenge of id 88 to 192.168.100.10 port 1812 EAP-Message = 0x010300061520 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac768389af630233427f0cb1a81ea1 (1) Finished request 1. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=89, length=235 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x0203005015001603010045010000410301587b2c9d26ea19e33cc96c713e27e86d48e7f90b ba9078be4787a3b58865b7e000001a0015001600330009000a002f000700670039006b003c00 35003d0100 Message-Authenticator = 0x900a66df9e8f1a8617b067c7e151f41d NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac768389af630233427f0cb1a81ea1 (2) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (2) group authorize { (2) - entering group authorize {...} (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) [wimax] = ok (2) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (2) suffix : No such realm "eads.com" (2) [suffix] = noop (2) eap : EAP packet type response id 3 length 80 (2) eap : Continuing tunnel setup. (2) [eap] = ok (2) Found Auth-Type = ? (2) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (2) group authenticate { (2) - entering group authenticate {...} (2) eap : Request found, released from the list (2) eap : EAP/ttls (2) eap : processing type ttls (2) ttls : Authenticate (2) ttls : processing EAP-TLS (2) ttls : eaptls_verify returned 7 (2) ttls : Done initial handshake (2) ttls : (other): before/accept initialization (2) ttls : TLS_accept: before/accept initialization (2) ttls : <<< TLS 1.0 Handshake [length 0045], ClientHello (2) ttls : TLS_accept: SSLv3 read client hello A (2) ttls : >>> TLS 1.0 Handshake [length 002a], ServerHello (2) ttls : TLS_accept: SSLv3 write server hello A (2) ttls : >>> TLS 1.0 Handshake [length 085e], Certificate (2) ttls : TLS_accept: SSLv3 write certificate A (2) ttls : >>> TLS 1.0 Handshake [length 020d], ServerKeyExchange (2) ttls : TLS_accept: SSLv3 write key exchange A (2) ttls : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone (2) ttls : TLS_accept: SSLv3 write server done A (2) ttls : TLS_accept: SSLv3 flush data (2) ttls : TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode (2) ttls : eaptls_process returned 13 (2) [eap] = handled Sending Access-Challenge of id 89 to 192.168.100.10 port 1812 EAP-Message = 0x0104040015c000000aad160301002a0200002603014de628f49d0a58418112208d644ced77 bf239b5cd0ac542da3e0f4e7c6389a7500001500160301085e0b00085a0008570003a6308203 a23082028aa003020102020101300d06092a864886f70d0101040500308193310b3009060355 040613024652310f300d060355040813065261646975733112301006035504071309536f6d65 776865726531153013060355040a130c4578616d706c6520496e632e3120301e06092a864886 f70d010901161161646d696e406578616d706c652e636f6d312630240603550403131d457861 6d706c6520436572746966696361746520417574686f72697479 EAP-Message = 0x301e170d3131303533313132313032365a170d3132303533303132313032365a307c310b30 09060355040613024652310f300d0603550408130652616469757331153013060355040a130c 4578616d706c6520496e632e312330210603550403131a4578616d706c652053657276657220 43657274696669636174653120301e06092a864886f70d010901161161646d696e406578616d 706c652e636f6d30820122300d06092a864886f70d01010105000382010f003082010a028201 0100b6eec957d8b9ccf58cac8aca0c22e429e9e50bae985fbd09fa49ca80c296b255ab2ddcdc 9604e5827097a4913e040ed16d2e03278ba495997d0970f0dc8a EAP-Message = 0x3de2d19742df29ae5d8964b0eea69f8098cad478d47a1303ee0623059c9fdea155849921fe f4896370ad551a4cb0c6907e3309da2fbd4c8464836f9dde6ad78724c8094dd74ec5aae4bdb6 56f9c2eba830148a8e3083af941e8a27ddf3e4dd76a6f380a82203e569e7033d9d11c5edd1e9 34dfdc59a79189264ab4092b59f25bf69a0a8270c5a4f60f46c4b4bac24efca3a3fba357e55c a82a54b9df7af4cc0a1334155ba14590039dcde4502cd0a65149613948e22af911de4f887f97 73ee12b2070203010001a317301530130603551d25040c300a06082b06010505070301300d06 092a864886f70d0101040500038201010001c18581de2951f923 EAP-Message = 0x6ecb42edc56b67eaff5f29f9d96350cc431fa58e575e5829b84e2d2d61ea4047b493d3ba02 8618067f191ab467414158fb41b0f33f9de13d48dd94c5f6d4060b687617532ba2e908140847 08a895331416c460d709a97eb1125885244dce77795c064b9a2e3b0027bc02a629ccf2b6424a f17318994415fffba3543ffefa6e06f17ec82c9ce722e901602cc2ce23b60ad1c4deed6959d7 e912a21fecaad1547da914e046a9760eb70eb8426a65bf2b7d9d124d9365311ce78f9977af94 1f39d8c33a84b03e883cdad3e8645604f7d3e4c8fd840a9dade2258835ec2b44214c88d32be9 f7137005fb07a42052f30e555fbcb20d3c76a3eb0004ab308204 EAP-Message = 0xa73082038fa0030201020209 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac76838aa8630233427f0cb1a81ea1 (2) Finished request 2. Waking up in 4.7 seconds. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=90, length=161 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x020400061500 Message-Authenticator = 0xbfc9c710af8c98f1b1ee9e248bdeb6ec NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac76838aa8630233427f0cb1a81ea1 (3) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (3) group authorize { (3) - entering group authorize {...} (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) [wimax] = ok (3) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (3) suffix : No such realm "eads.com" (3) [suffix] = noop (3) eap : EAP packet type response id 4 length 6 (3) eap : Continuing tunnel setup. (3) [eap] = ok (3) Found Auth-Type = ? (3) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (3) group authenticate { (3) - entering group authenticate {...} (3) eap : Request found, released from the list (3) eap : EAP/ttls (3) eap : processing type ttls (3) ttls : Authenticate (3) ttls : processing EAP-TLS (3) ttls : Received TLS ACK (3) ttls : Received TLS ACK (3) ttls : ACK handshake fragment handler (3) ttls : eaptls_verify returned 1 (3) ttls : eaptls_process returned 13 (3) [eap] = handled Sending Access-Challenge of id 90 to 192.168.100.10 port 1812 EAP-Message = 0x0105040015c000000aad00e43e5f1a392e6ac9300d06092a864886f70d0101050500308193 310b3009060355040613024652310f300d060355040813065261646975733112301006035504 071309536f6d65776865726531153013060355040a130c4578616d706c6520496e632e312030 1e06092a864886f70d010901161161646d696e406578616d706c652e636f6d31263024060355 0403131d4578616d706c6520436572746966696361746520417574686f72697479301e170d31 31303533313132313032365a170d3132303533303132313032365a308193310b300906035504 0613024652310f300d0603550408130652616469757331123010 EAP-Message = 0x06035504071309536f6d65776865726531153013060355040a130c4578616d706c6520496e 632e3120301e06092a864886f70d010901161161646d696e406578616d706c652e636f6d3126 30240603550403131d4578616d706c6520436572746966696361746520417574686f72697479 30820122300d06092a864886f70d01010105000382010f003082010a0282010100cf346800f1 aade9a56e7acd4ae20d6f4c442c2e02cb633731e046cba744d808e1b97dae3d524a3c631296c acaef6d729d828fa2a7d5ad929ddb8b8ac871207f85b8f514ceeb1c2771da86742b4badc5b5d af8ec60be1ea7050c3bb5987c14ead65a7ad3f06b4ebb09b922d EAP-Message = 0x8cb8ca3531ce62c372f3adc0e7ad16dc9bb0062323edebd0555c7049d6bbf01fc5240d0269 3eddc5822905c6d53e930ee728fdb9ba2172138681a570bc34ab5de5064632ec1259008b75dd bac455c4c5760da9f3bcc3ab0d40cd431d22dcb1b6b11c168c3e4687dc7c19a5871760874fb5 0c3b27d4f28a74b9c669f786acbfd50c5c2a25ca08d606d05dda85df59825b33192a2ad50203 010001a381fb3081f8301d0603551d0e041604142ff21cc1b61981cd1928a70ffb9dfd7ddaf1 700e3081c80603551d230481c03081bd80142ff21cc1b61981cd1928a70ffb9dfd7ddaf1700e a18199a48196308193310b3009060355040613024652310f300d EAP-Message = 0x060355040813065261646975733112301006035504071309536f6d65776865726531153013 060355040a130c4578616d706c6520496e632e3120301e06092a864886f70d01090116116164 6d696e406578616d706c652e636f6d312630240603550403131d4578616d706c652043657274 6966696361746520417574686f72697479820900e43e5f1a392e6ac9300c0603551d13040530 030101ff300d06092a864886f70d01010505000382010100a903db5d9e4a396307c9589ace37 8d253014c5b561000c4bd057d2e430f9f5e91bf8ae3dbc2a689463af2a8bbf585fc17eebda0d 5ab7e4a5d0d60a3b9b344ff413d81cff50e0245daaa2830ee2bf EAP-Message = 0xea6af9fce68b957d225106a2 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac76838ba9630233427f0cb1a81ea1 (3) Finished request 3. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=91, length=161 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x020500061500 Message-Authenticator = 0xf19ff52dcaff5594d6d2d0e8cf99d0a5 NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac76838ba9630233427f0cb1a81ea1 (4) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (4) group authorize { (4) - entering group authorize {...} (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) [wimax] = ok (4) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (4) suffix : No such realm "eads.com" (4) [suffix] = noop (4) eap : EAP packet type response id 5 length 6 (4) eap : Continuing tunnel setup. (4) [eap] = ok (4) Found Auth-Type = ? (4) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (4) group authenticate { (4) - entering group authenticate {...} (4) eap : Request found, released from the list (4) eap : EAP/ttls (4) eap : processing type ttls (4) ttls : Authenticate (4) ttls : processing EAP-TLS (4) ttls : Received TLS ACK (4) ttls : Received TLS ACK (4) ttls : ACK handshake fragment handler (4) ttls : eaptls_verify returned 1 (4) ttls : eaptls_process returned 13 (4) [eap] = handled Sending Access-Challenge of id 91 to 192.168.100.10 port 1812 EAP-Message = 0x010602cb158000000aadb869abceda0becac1d49627234002680125f5c23d91fb12fc57f5f b7be4628aa24f9f9e7cb78622962b56a3163be5c57ee2cca8fecfc9934e88a730d936bbe302a 401dad2d5bc6f8a7a9a892f180a41d765ca260f362686f3663f43630c84972f19c528213a961 35f0a4252f8da9f302b566173642c000b0a86a8761ce46127162624b7f0c28d93ab2f3cb56f8 b79aa98a0c41c2100c313bd175e0d390464073f1067ed5e189160301020d0c0002090080e185 943179de0da8ba01aaa3bc08b2c683e10e9826a0394bd9eb4058162d1d215bf969738cbe13f1 cf86db0473474bd9c888ac4c88e289330af9ed8ec45af8d0f1e0 EAP-Message = 0x4ebdc684ec29bc0f91052ca6c7efd0b92edd4e399023cf62d09050018ea64b1130c705b9e7 42d73947972e2b4694109b43e66d858bdc8f7eac3737ebbcd300010200800c932aecbabc4287 14e8461a9fb6e20f20ff475d8b2f5d4d81713181158f19cfc814dd7d04d94cec3e4ec8a83c4c 298a33c89cedaec13d13e4606971bdf94d3d9b84d38bf4515f405122896527ba163bde1031d3 a307e5dcfafad7cc3c08cafe4c53882ea682264698d7c0cda10ce698f3fd8d5fddfe4f55e6f9 2ad230c5c6420100872b25ec64264c5a3f5ffea79b8e52d54f63d4ff23b4422ff105e8aeff5b e7d94fe92fa3c865aacb8d7fb46a76080caef24b07a13b330fed EAP-Message = 0x0076acca2294ffaee380bbdc9746fca807f085fb9b6d3971438a8688c901b75b31e8897f55 642e7b9acfbf90119ae796f7a557b5c0100660545fcbd6874729c3e7dd3e47eb9ec812462872 1429836af9317cda8e2ce5779b1893c511c0dc3fc223d3d8caf69d84277c4251aef8e6cc5f56 8782aa211094b1e06b46991c5c951c5f87a9f7efc705a66f8ae53d48343523eddabe2626ce77 976602f75749665cc525a04fb14ffd1323f013f9c29120a67c03fcc396199cf2cf382ea4cf0c cb1e80164fea44bf35e97916030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac76838caa630233427f0cb1a81ea1 (4) Finished request 4. Waking up in 4.5 seconds. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=92, length=351 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x020600c41500160301008610000082008001455425498d4e781bd0c39a4e506674a7025212 fc72155fe8fd97090665dca0ba0b5e2f4d1154a7f8503627c074a0eee463d1bfd472ed04adb0 91136688948c02061fa969179f5e6073802554260a1da1993f421bf1c0bb5bc56e4e12ae0b2d 825d17915ca089244c7643e5d5538b609bfbca8e657cbb3bca2801fe1e575d97140301000101 1603010028d4dd4af67d9ca7167cc8f634677f8ea78b2236861684655711098fb54fc26cc281 66d0525f30f9a0 Message-Authenticator = 0x32f7680d343e93a36d54cf2ffe5b5637 NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac76838caa630233427f0cb1a81ea1 (5) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (5) group authorize { (5) - entering group authorize {...} (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) [wimax] = ok (5) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (5) suffix : No such realm "eads.com" (5) [suffix] = noop (5) eap : EAP packet type response id 6 length 196 (5) eap : Continuing tunnel setup. (5) [eap] = ok (5) Found Auth-Type = ? (5) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (5) group authenticate { (5) - entering group authenticate {...} (5) eap : Request found, released from the list (5) eap : EAP/ttls (5) eap : processing type ttls (5) ttls : Authenticate (5) ttls : processing EAP-TLS (5) ttls : eaptls_verify returned 7 (5) ttls : Done initial handshake (5) ttls : <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange (5) ttls : TLS_accept: SSLv3 read client key exchange A (5) ttls : <<< TLS 1.0 ChangeCipherSpec [length 0001] (5) ttls : <<< TLS 1.0 Handshake [length 0010], Finished (5) ttls : TLS_accept: SSLv3 read finished A (5) ttls : >>> TLS 1.0 ChangeCipherSpec [length 0001] (5) ttls : TLS_accept: SSLv3 write change cipher spec A (5) ttls : >>> TLS 1.0 Handshake [length 0010], Finished (5) ttls : TLS_accept: SSLv3 write finished A (5) ttls : TLS_accept: SSLv3 flush data (5) ttls : (other): SSL negotiation finished successfully SSL Connection Established (5) ttls : eaptls_process returned 13 (5) [eap] = handled Sending Access-Challenge of id 92 to 192.168.100.10 port 1812 EAP-Message = 0x0107003d15800000003314030100010116030100280fffe283805736eb626decd011756e22 b5496fe15710da0d7dc8c7207a32289778b92d5885e652b5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac76838dab630233427f0cb1a81ea1 (5) Finished request 5. Waking up in 4.1 seconds. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=93, length=310 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x0207009b150017030100909f84a66746c7cf3974afd8ab6157301d4c97f00339053b36c9a5 9fe819dfcd482a3d72823753dff7ab3f791a526df518c81ccaa49f7e8fd40a3d297d9093f08a 58c0fd480f26509a9388336da43929d15921a211eae621619bb965904f2ee3e87efbb8f49674 c61f203110abadf99c11afda6a0e490f9130597067ea549496cefeb2118c76dea0203f80737a 9e7417cd Message-Authenticator = 0xe81dfa7d5f4d3996555392a68d3f04d7 NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac76838dab630233427f0cb1a81ea1 (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (6) group authorize { (6) - entering group authorize {...} (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) [wimax] = ok (6) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (6) suffix : No such realm "eads.com" (6) [suffix] = noop (6) eap : EAP packet type response id 7 length 155 (6) eap : Continuing tunnel setup. (6) [eap] = ok (6) Found Auth-Type = ? (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (6) group authenticate { (6) - entering group authenticate {...} (6) eap : Request found, released from the list (6) eap : EAP/ttls (6) eap : processing type ttls (6) ttls : Authenticate (6) ttls : processing EAP-TLS (6) ttls : eaptls_verify returned 7 (6) ttls : Done initial handshake (6) ttls : eaptls_process returned 7 (6) ttls : Session established. Proceeding to decode tunneled attributes. (6) ttls : Got tunneled request User-Name = "cpe4@eads.com" MS-CHAP-Challenge = 0x524783588ddc1bb5df1da04af1ee2d5d MS-CHAP2-Response = 0x1600e0e47d06ce97ea0a60567c9e7d640bc600000000000000003b46f4aca33bc647209dab 6d064d7b623a5df0c8fab3c2f3 FreeRADIUS-Proxied-To = 127.0.0.1 (6) ttls : Sending tunneled request User-Name = "cpe4@eads.com" MS-CHAP-Challenge = 0x524783588ddc1bb5df1da04af1ee2d5d MS-CHAP2-Response = 0x1600e0e47d06ce97ea0a60567c9e7d640bc600000000000000003b46f4aca33bc647209dab 6d064d7b623a5df0c8fab3c2f3 FreeRADIUS-Proxied-To = 127.0.0.1 server inner-tunnel { (6) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) group authorize { (6) - entering group authorize {...} (6) [chap] = noop (6) mschap : Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (6) [mschap] = ok (6) suffix : Looking up realm "eads.com" for User-Name = "cpe4@eads.com" (6) suffix : No such realm "eads.com" (6) [suffix] = noop (6) update control { (6) } # update control = noop (6) eap : No EAP-Message, not doing EAP (6) [eap] = noop (6) files : users: Matched entry cpe4@eads.com at line 91 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap : WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) Found Auth-Type = ? (6) # Executing group from file /usr/local/etc/raddb/sites-enabled/inner-tunnel (6) group MS-CHAP { (6) - entering group MS-CHAP {...} (6) mschap : Creating challenge hash with username: cpe4@eads.com (6) mschap : Told to do MS-CHAPv2 for cpe4@eads.com with NT-Password (6) mschap : adding MS-CHAPv2 MPPE keys (6) [mschap] = ok (6) WARNING: Empty post-auth section. Using default return values. (6) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/inner-tunnel } # server inner-tunnel (6) ttls : Got tunneled reply code 2 Session-Timeout = 3600 Filter-Id = "test" MS-CHAP2-Success = 0x16533d41324545333844363945383731384645363242384535453837444134433345383237 333134303442 MS-MPPE-Recv-Key = 0x5ac2e372bf3085350ea9e377e10fa0b6 MS-MPPE-Send-Key = 0xd77e84ffdba7c7c94aaedf504955c3c7 MS-MPPE-Encryption-Policy = Encryption-Allowed MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (6) ttls : Got tunneled Access-Accept (6) ttls : Got MS-CHAP2-Success, tunneling it to the client in a challenge. (6) [eap] = handled Sending Access-Challenge of id 93 to 192.168.100.10 port 1812 EAP-Message = 0x0108005f15800000005517030100501665535a9fbbb9d91b0116452b2c92ca86fec3e26123 d3fd0f2c90b430a6c352d48a3a8eec084e20666296a57b63c157f4a969930fc7ac3f016592b9 b9e9fc20e4fc0fb1f65ef70de45d8e8f9d02be6a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x88ac76838ea4630233427f0cb1a81ea1 (6) Finished request 6. rad_recv: Access-Request packet from host 192.168.100.10 port 1812, id=94, length=161 User-Name = "{am=1}cpe4@eads.com" EAP-Message = 0x020800061500 Message-Authenticator = 0x01c1e4c8092af309452a074fbf85d797 NAS-Identifier = "NPU" NAS-IP-Address = 192.168.100.10 Calling-Station-Id = "00-19-15-C8-99-9D" WiMAX-BS-Id = 0x214e00010101 NAS-Port-Type = Wireless-802.16 Framed-MTU = 2000 Service-Type = Framed-User WiMAX-GMT-Timezone-offset = 256 State = 0x88ac76838ea4630233427f0cb1a81ea1 (7) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default (7) group authorize { (7) - entering group authorize {...} (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) [wimax] = ok (7) suffix : Looking up realm "eads.com" for User-Name = "{am=1}cpe4@eads.com" (7) suffix : No such realm "eads.com" (7) [suffix] = noop (7) eap : EAP packet type response id 8 length 6 (7) eap : Continuing tunnel setup. (7) [eap] = ok (7) Found Auth-Type = ? (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) group authenticate { (7) - entering group authenticate {...} (7) eap : Request found, released from the list (7) eap : EAP/ttls (7) eap : processing type ttls (7) ttls : Authenticate (7) ttls : processing EAP-TLS (7) ttls : Received TLS ACK (7) ttls : Received TLS ACK (7) ttls : ACK handshake is finished (7) ttls : eaptls_verify returned 3 (7) ttls : eaptls_process returned 3 (7) ttls : Using saved attributes from the original Access-Accept (7) eap : Freeing handler (7) [eap] = ok (7) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (7) group post-auth { (7) - entering group post-auth {...} (7) [exec] = noop (7) update request { (7) expand: %{User-Name} -> {am=1}cpe4@eads.com (7) } # update request = noop (7) update reply { (7) expand: %{reply:EAP-MSK} -> 0x136e9f4e17d5d9c152c761683b9ff583dad202cf52ff3eb015875fac682c3b3e6a513e57ca 1c54f30f765467a88dc959ad9b5fa8e209a9d99b27ddad51e8b619 (7) } # update reply = noop (7) wimax : MIP-RK = 0xfe49ecf2e917155067c599b3fccb51beb0fcec8d8546f48d2d64bcd7fe600ee1fffc1bc298 18070a6e9a6a344ae5cafcf9fbba52de6098bb0e2aaf17fc63937c (7) wimax : MIP-SPI = 67d71c9b (7) wimax : WARNING: WiMAX-IP-Technology not found in reply. (7) wimax : WARNING: Not calculating MN-HA keys (7) [wimax] = updated Sending Access-Accept of id 94 to 192.168.100.10 port 1812 MS-MPPE-Recv-Key = 0x136e9f4e17d5d9c152c761683b9ff583dad202cf52ff3eb015875fac682c3b3e MS-MPPE-Send-Key = 0x6a513e57ca1c54f30f765467a88dc959ad9b5fa8e209a9d99b27ddad51e8b619 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "{am=1}cpe4@eads.com" WiMAX-FA-RK-Key = 0xecc5305cab2138e96974262acfd5e80e9eb5000a WiMAX-MSK = 0x136e9f4e17d5d9c152c761683b9ff583dad202cf52ff3eb015875fac682c3b3e6a513e57ca 1c54f30f765467a88dc959ad9b5fa8e209a9d99b27ddad51e8b619 WiMAX-FA-RK-SPI = 2602358631 (7) Finished request 7. Waking up in 3.9 seconds. (0) Cleaning up request packet ID 87 with timestamp +5 (1) Cleaning up request packet ID 88 with timestamp +5 Waking up in 0.1 seconds. (2) Cleaning up request packet ID 89 with timestamp +5 (3) Cleaning up request packet ID 90 with timestamp +5 (4) Cleaning up request packet ID 91 with timestamp +6 Waking up in 0.4 seconds. (5) Cleaning up request packet ID 92 with timestamp +6 (6) Cleaning up request packet ID 93 with timestamp +6 (7) Cleaning up request packet ID 94 with timestamp +6 Ready to process requests. -----Message d'origine----- De : freeradius-users-bounces+thomas.hahusseau=cassidian.com@lists.freeradius.org [mailto:freeradius-users-bounces+thomas.hahusseau=cassidian.com@lists.freera dius.org] De la part de David Peterson Envoyé : mercredi 1 juin 2011 14:07 À : FreeRadius users mailing list Objet : RE: Freeradius + Alvarion 4Motion specify filter-id value inaccess-accept from value in user conf file ? I just use Framed-Filter-Id = "profilename" in the reply. When you added: update reply { WiMAX-FA-RK-Key = 0x00 WiMAX-MSK = "%{reply:EAP-MSK}" Filter-Id = "Profile1" } That replies with only 1 filter ID. Take the Filter-Id out and keep it in the users file: cpe1@eads.com Cleartext-Password := "cpe1" Session-Timeout = 3600, Termination-Action = Radius-Request, Filter-Id = "Profile1" David -----Original Message----- From: Hahusseau, Thomas [mailto:thomas.hahusseau@cassidian.com] Sent: Wednesday, June 01, 2011 5:12 AM To: David Peterson-WirelessConnections; FreeRadius users mailing list Subject: RE: Freeradius + Alvarion 4Motion specify filter-id value in access-accept from value in user conf file ? Hello, My Wimax device require MPPE keys to be sent in access accept if I change that setting in module/wimax from no to yes the wimax don't connect anymore. My problem is not getting my Wimax device connected it's already done. My problem is that I want specific values of "Filter-Id" attribute sent in access-accept according to the user-name sent in access-request. Filter-ID = "Profile1" when user CPE1@eads.com is trying to connect. Filter-ID = "Profile2" when user CPE2@eads.com is trying to connect. Regards, Thomas PS : Uncomment "wimax" lines in site-enable and inner-tunnel conf files already done. -----Message d'origine----- De : freeradius-users-bounces+thomas.hahusseau=cassidian.com@lists.freeradius freeradius-users-bounces+.org [mailto:freeradius-users-bounces+thomas.hahusseau=cassidian.com@lists.freera dius.org] De la part de David Peterson Envoyé : mardi 31 mai 2011 19:31 À : 'FreeRadius users mailing list' Objet : RE: Freeradius + Alvarion 4Motion specify filter-id valueinaccess-accept from value in user conf file ? Make sure you configure FR to delete the MPPE keys. This can be found in the /modules/wimax file. Set the value from No to Yes. As well, you need to configure the server to use the inner-tunnel. I would start from the default FR settings, uncomment the wimax entries you see in sites-available/default and sites-available/inner-tunnel, make the change in the /modules/wimax file and make sure your profile names match as this is case sensitive. David -----Original Message----- From: freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradius.or freeradius-users-bounces+g [mailto:freeradius-users-bounces+david.peterson=acc-corp.net@lists.freeradiu s.org] On Behalf Of Hahusseau, Thomas Sent: Tuesday, May 31, 2011 1:18 PM To: freeradius-users@lists.freeradius.org Subject: Freeradius + Alvarion 4Motion specify filter-id value inaccess-accept from value in user conf file ? Hello, I'm running latest version form Master Branch of Freeradius. I managed to connect an Alvarion CPE to an Alvarion 4M BS with Freeradius server as authenticator. Everything works well except that I directly specified in my /site-enable/default configuration file the value of "Filter-Id" attribute required by the base station. ----------- /site-enabled/default post-auth { exec update request { WiMAX-MN-NAI = "%{User-Name}" } update reply { WiMAX-FA-RK-Key = 0x00 WiMAX-MSK = "%{reply:EAP-MSK}" Filter-Id = "Profile1" } wimax Post-Auth-Type REJECT { # log failed authentications in SQL, too. # sql attr_filter.access_reject } } ----------- I would like to use different value of attribute "Filter-Id" for different users (specific QoS setting in Alvarion ASN-GW for each Filter-Id). I would like to use the "Filter-ID"'s value specified in my users conf file : ----------- users #standard customer cpe1@eads.com Cleartext-Password := "cpe1" Session-Timeout = 3600, Termination-Action = Radius-Request, Filter-Id = "Profile1" #VIP customer cpe2@eads.com Cleartext-Password := "cpe2" Session-Timeout = 3600, Termination-Action = Radius-Request, Filter-Id = "Profile2" ----------- I tried to use the same syntax as for WiMAX-MSK attribute: Filter-ID ="%{Filter-Id}" but it doesn't work (Filter-ID value in access-accept is empty). I googled "Filter-Id freeradius" and found nothing relevant. Is it possible to use Filter-ID value form users conf file in access-accept ? Here is an example on access-accept message with filter-id specified directly in site-enable/default conf file. ----------- radiusd -X (7) Found Auth-Type = ? (7) # Executing group from file /usr/local/etc/raddb/sites-enabled/default (7) group authenticate { (7) - entering group authenticate {...} (7) eap : Request found, released from the list (7) eap : EAP/ttls (7) eap : processing type ttls (7) ttls : Authenticate (7) ttls : processing EAP-TLS (7) ttls : Received TLS ACK (7) ttls : Received TLS ACK (7) ttls : ACK handshake is finished (7) ttls : eaptls_verify returned 3 (7) ttls : eaptls_process returned 3 (7) ttls : Using saved attributes from the original Access-Accept (7) eap : Freeing handler (7) [eap] = ok (7) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default (7) group post-auth { (7) - entering group post-auth {...} (7) [exec] = noop (7) update request { (7) expand: %{User-Name} -> {am=1}791d05915a25400ca9d1a3cb1a2c7ffa@eads.com (7) } # update request = noop (7) update reply { (7) expand: %{reply:EAP-MSK} -> 0x0473dcd65638bc4ef089945467f25e24f252b53f34e4d2f220d157c3d1192528cb185a0437 d0a641fd5434d28738eae8f013d4b0308662a0e1b365d8ad542ce0 (7) } # update reply = noop (7) wimax : MIP-RK = 0x9ec871a65c3033e03c0d77ed55a1517d4b7dbbbeb2d782bcf369635861e64925c5db13c362 86e2032c789ad6fe2c09cd21eda782a9a4758e9ce73f8f384c46b6 (7) wimax : MIP-SPI = bb9d949a (7) wimax : WARNING: WiMAX-IP-Technology not found in reply. (7) wimax : WARNING: Not calculating MN-HA keys (7) [wimax] = updated Sending Access-Accept of id 246 to 192.168.100.10 port 1812 MS-MPPE-Recv-Key = 0x0473dcd65638bc4ef089945467f25e24f252b53f34e4d2f220d157c3d1192528 MS-MPPE-Send-Key = 0xcb185a0437d0a641fd5434d28738eae8f013d4b0308662a0e1b365d8ad542ce0 EAP-Message = 0x03080004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "{am=1}791d05915a25400ca9d1a3cb1a2c7ffa@eads.com" WiMAX-FA-RK-Key = 0xb37b0b5832687e02c31b94319b2ba3077479411f WiMAX-MSK = 0x0473dcd65638bc4ef089945467f25e24f252b53f34e4d2f220d157c3d1192528cb185a0437 d0a641fd5434d28738eae8f013d4b0308662a0e1b365d8ad542ce0 Filter-Id = "Profile1" WiMAX-FA-RK-SPI = 2593430971 (7) Finished request 7. ----------- Regards, Mr Thomas Hahusseau, Ingénieur réseau Cassidian (EADS) - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html