acct_unique problem

9 Feb 2016

      Hello!
“-r: not found” and “sh: 0: Illegal option –r” was an error with snmpwalk. I compiled FreeRadius without SNMP installed. 
So, I installed SNMP. The “-r” error disappeared, but unfortunately the same error still occurs:
(0) Received Access-Request Id 100 from 192.168.0.1:55429 to 192.168.0.98:1812 length 144
(0)   Service-Type = Framed-User
(0)   Framed-Protocol = PPP
(0)   NAS-Port = 15731333
(0)   NAS-Port-Type = Ethernet
(0)   User-Name = "test"
(0)   Calling-Station-Id = "C0:4A:00:87:C6:D9"
(0)   Called-Station-Id = "service1"
(0)   NAS-Port-Id = "bridge1"
(0)   CHAP-Challenge = 0xbd3a9c8b7601f363a824eaac74bd8e10
(0)   CHAP-Password = 0x018481e984212401f879eae27379964cf4
(0)   NAS-Identifier = "Main_Router"
(0)   NAS-IP-Address = 192.168.0.1
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0) files: users: Matched entry DEFAULT at line 181
(0)     [files] = ok
(0) sql: EXPAND %{User-Name}
(0) sql:    --> test
(0) sql: SQL-User-Name set to 'test'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql:   Cleartext-Password := "123456"
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(0) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql:    --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Conditional check items matched
(0) sql: Group "1": Merging assignment check items
(0) sql:   Simultaneous-Use := 1
(0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql:    --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Merging reply items
rlm_sql (sql): Released connection (1)
rlm_sql (sql): Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
(0)     [sql] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: WARNING: Auth-Type already set.  Not setting to PAP
(0)     [pap] = noop
(0)   } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   Auth-Type CHAP {
(0) chap: Comparing with "known good" Cleartext-Password
(0) chap: CHAP user "test" authenticated successfully
(0)     [chap] = ok
(0)   } # Auth-Type CHAP = ok
(0) # Executing section session from file /usr/local/etc/raddb/sites-enabled/default
(0)   session {
(0) sql: EXPAND %{User-Name}
(0) sql:    --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql:    --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
rlm_sql (sql): Reserved connection (2)
(0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql:    --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
(0)   preacct {
(0)     [preprocess] = ok
(0)     policy acct_unique {
(0)       if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) {
(0)       EXPAND %{string:Class}
(0)          -->
(0)       if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i)  -> FALSE
(0)       else {
(0)         update request {
(0)           EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(0)              --> aeaca7a4ec4f29c5b435e1e56cd6d541
(0)           &Acct-Unique-Session-Id := aeaca7a4ec4f29c5b435e1e56cd6d541
(0)         } # update request = noop
(0)         EXPAND %{User-Name}
(0)            --> test
(0)         EXPAND %{Acct-Session-ID}
(0)            --> 81900848
(0)         EXPAND %{NAS-IPv6-Address}
(0)            -->
(0)         EXPAND %{NAS-IP-Address}
(0)            --> 192.168.0.1
(0)         EXPAND %{NAS-Identifier}
(0)            -->
(0)         EXPAND %{NAS-Port-ID}
(0)            -->
(0)         EXPAND %{NAS-Port}
(0)            --> 0
(0)       } # else = noop
(0)     } # policy acct_unique = noop

back to square one...

Please, need some help.

Below is my entire log (no more “-r” errors):

Server was built with:
  accounting               : yes
  authentication           : yes
  ascend-binary-attributes : yes
  coa                      : yes
  control-socket           : yes
  detail                   : yes
  dhcp                     : yes
  dynamic-clients          : yes
  osfc2                    : no
  proxy                    : yes
  regex-pcre               : no
  regex-posix              : yes
  regex-posix-extended     : yes
  session-management       : yes
  stats                    : yes
  tcp                      : yes
  threads                  : yes
  tls                      : yes
  unlang                   : yes
  vmps                     : yes
  developer                : no
Server core libs:
  freeradius-server        : 3.0.11
  talloc                   : 2.0.*
  ssl                      : 1.0.1p release
Endianness:
  little
Compilation flags:
  cppflags : -isystem /usr/local/include/
  cflags   : -I/root/freeradius/freeradius-server-3.0.11 -I/root/freeradius/freeradius-server-3.0.11/src -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/autoconf.h -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/build.h -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/features.h -include /root/freeradius/freeradius-server-3.0.11/src/freeradius-devel/radpaths.h -fno-strict-aliasing -g -O2 -Wall -std=c99 -D_GNU_SOURCE -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DOPENSSL_NO_KRB5 -DNDEBUG -DIS_MODULE=1
  ldflags  :  -L/usr/local/lib -Wl,-rpath,/usr/local/lib
  libs     : -lcrypto -lssl -ltalloc -lexecinfo -lpthread -lreadline

Copyright (C) 1999-2016 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file /usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
        allow_core_dumps = no
}
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        sbindir = "/usr/local/sbin"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
        libdir = "/usr/local/lib"
        radacctdir = "/usr/local/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
        allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
}
home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
}
home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
}
realm example.com {
        auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "*"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
}
client localhost_ipv6 {
        ipv6addr = ::1
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
}
Debugger not attached
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
# Creating Auth-Type = eap
radiusd: #### Instantiating modules ####
modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Loading module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  detail {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /usr/local/etc/raddb/mods-enabled/files
  files {
        filename = "/usr/local/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/usr/local/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/usr/local/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
  }
  # Loading module "ntlm_auth" from file /usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/usr/local/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file /usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/usr/local/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_sql
  # Loading module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 3306
        login = "root"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = yes
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,            acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime        = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    = %{%{Acct-Session-Time}:-NULL}, acctinputoctets        = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  instantiate {
  }
  # Instantiating module "reject" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /usr/local/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"  found in filter list for realm "DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec"     found in filter list for realm "DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /usr/local/etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /usr/local/etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/usr/local/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/usr/local/etc/raddb/certs/server.pem"
        certificate_file = "/usr/local/etc/raddb/certs/server.pem"
        ca_file = "/usr/local/etc/raddb/certs/ca.pem"
        private_key_password = <<< secret >>>
        dh_file = "/usr/local/etc/raddb/certs/dh"
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        ecdh_curve = "prime256v1"
    cache {
        enable = yes
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        proxy_tunneled_request_as_eap = yes
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Instantiating module "expiration" from file /usr/local/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /usr/local/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /usr/local/etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /usr/local/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /usr/local/etc/raddb/mods-enabled/realm
  # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.6.25
   mysql {
    tls {
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 192.168.0.1 (123231) to global clients list
rlm_sql (192.168.0.1): Client "123231" (sql) added
rlm_sql (sql): Released connection (0)
rlm_sql (sql): Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /usr/local/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipv6addr = ::
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "auth"
        ipaddr = 127.0.0.1
        port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 33259
Listening on proxy address :: port 26258
Ready to process requests

(0) Received Access-Request Id 100 from 192.168.0.1:55429 to 192.168.0.98:1812 length 144
(0)   Service-Type = Framed-User
(0)   Framed-Protocol = PPP
(0)   NAS-Port = 15731333
(0)   NAS-Port-Type = Ethernet
(0)   User-Name = "test"
(0)   Calling-Station-Id = "C0:4A:00:87:C6:D9"
(0)   Called-Station-Id = "service1"
(0)   NAS-Port-Id = "bridge1"
(0)   CHAP-Challenge = 0xbd3a9c8b7601f363a824eaac74bd8e10
(0)   CHAP-Password = 0x018481e984212401f879eae27379964cf4
(0)   NAS-Identifier = "Main_Router"
(0)   NAS-IP-Address = 192.168.0.1
(0) # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0) chap:   &control:Auth-Type := CHAP
(0)     [chap] = ok
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0)     [eap] = noop
(0) files: users: Matched entry DEFAULT at line 181
(0)     [files] = ok
(0) sql: EXPAND %{User-Name}
(0) sql:    --> test
(0) sql: SQL-User-Name set to 'test'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'test' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql:   Cleartext-Password := "123456"
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql:    --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'test' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(0) sql:    --> SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'test' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql:    --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Conditional check items matched
(0) sql: Group "1": Merging assignment check items
(0) sql:   Simultaneous-Use := 1
(0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql:    --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '1' ORDER BY id
(0) sql: Group "1": Merging reply items
rlm_sql (sql): Released connection (1)
rlm_sql (sql): Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
(0)     [sql] = ok
(0)     [expiration] = noop
(0)     [logintime] = noop
(0) pap: WARNING: Auth-Type already set.  Not setting to PAP
(0)     [pap] = noop
(0)   } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(0)   Auth-Type CHAP {
(0) chap: Comparing with "known good" Cleartext-Password
(0) chap: CHAP user "test" authenticated successfully
(0)     [chap] = ok
(0)   } # Auth-Type CHAP = ok
(0) # Executing section session from file /usr/local/etc/raddb/sites-enabled/default
(0)   session {
(0) sql: EXPAND %{User-Name}
(0) sql:    --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql:    --> SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
rlm_sql (sql): Reserved connection (2)
(0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql:    --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'test' AND acctstoptime IS NULL
(0) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
(0)   preacct {
(0)     [preprocess] = ok
(0)     policy acct_unique {
(0)       if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) {
(0)       EXPAND %{string:Class}
(0)          -->
(0)       if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i)  -> FALSE
(0)       else {
(0)         update request {
(0)           EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(0)              --> aeaca7a4ec4f29c5b435e1e56cd6d541
(0)           &Acct-Unique-Session-Id := aeaca7a4ec4f29c5b435e1e56cd6d541
(0)         } # update request = noop
(0)         EXPAND %{User-Name}
(0)            --> test
(0)         EXPAND %{Acct-Session-ID}
(0)            --> 81900848
(0)         EXPAND %{NAS-IPv6-Address}
(0)            -->
(0)         EXPAND %{NAS-IP-Address}
(0)            --> 192.168.0.1
(0)         EXPAND %{NAS-Identifier}
(0)            -->
(0)         EXPAND %{NAS-Port-ID}
(0)            -->
(0)         EXPAND %{NAS-Port}
(0)            --> 0
(0)       } # else = noop
(0)     } # policy acct_unique = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "test", looking up realm NULL
(0) suffix: No such realm "NULL"
(0)     [suffix] = noop
(0)     [files] = noop
(0)   } # preacct = ok
(0) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
(0)   accounting {
(0) detail: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(0) detail:    --> /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(0) detail: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(0) detail: EXPAND %t
(0) detail:    --> Tue Feb  9 05:09:41 2016
(0)     [detail] = ok
(0)     [unix] = ok
(0) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(0) sql:    --> type.stop.query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (3)
(0) sql: EXPAND %{User-Name}
(0) sql:    --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    = %{%{Acct-Session-Time}:-NULL}, acctinputoctets        = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'
(0) sql:    --> UPDATE radacct SET acctstoptime = FROM_UNIXTIME(1455001781), acctsessiontime    = 0, acctinputoctets    = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '0', acctterminatecause = '', connectinfo_stop = '' WHERE AcctUniqueId = 'aeaca7a4ec4f29c5b435e1e56cd6d541'
(0) sql: Executing query: UPDATE radacct SET acctstoptime       = FROM_UNIXTIME(1455001781), acctsessiontime    = 0, acctinputoctets    = '0' << 32 | '0', acctoutputoctets = '0' << 32 | '0', acctterminatecause = '', connectinfo_stop = '' WHERE AcctUniqueId = 'aeaca7a4ec4f29c5b435e1e56cd6d541'
rlm_sql_mysql: Rows matched: 0  Changed: 0  Warnings: 0
(0) sql: SQL query returned: success
(0) sql: 0 record(s) updated
(0) sql: Trying next query...
(0) sql: EXPAND INSERT INTO radacct (acctsessionid,             acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp} - %{%{Acct-Session-Time}:-0}), FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), %{%{Acct-Session-Time}:-NULL}, '%{Acct-Authentic}', '', '%{Connect-Info}', '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')
(0) sql:    --> INSERT INTO radacct (acctsessionid,             acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('81900848', 'aeaca7a4ec4f29c5b435e1e56cd6d541', 'test', '', '192.168.0.1', '0', '', FROM_UNIXTIME(1455001781 - 0), FROM_UNIXTIME(1455001781), FROM_UNIXTIME(1455001781), 0, '', '', '', '0' << 32 | '0', '0' << 32 | '0', '', '', '', 'Framed-User', 'PPP', '')
(0) sql: Executing query: INSERT INTO radacct (acctsessionid,           acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('81900848', 'aeaca7a4ec4f29c5b435e1e56cd6d541', 'test', '', '192.168.0.1', '0', '', FROM_UNIXTIME(1455001781 - 0), FROM_UNIXTIME(1455001781), FROM_UNIXTIME(1455001781), 0, '', '', '', '0' << 32 | '0', '0' << 32 | '0', '', '', '', 'Framed-User', 'PPP', '')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (3)
rlm_sql (sql): Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 25 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 5.6.25, protocol version 10
(0)     [sql] = ok
(0)     [exec] = noop
(0) attr_filter.accounting_response: EXPAND %{User-Name}
(0) attr_filter.accounting_response:    --> test
(0) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(0)     [attr_filter.accounting_response] = updated
(0)   } # accounting = updated
rlm_sql (sql): Released connection (2)
(0)     [sql] = ok
(0)   } # session = ok
(0) # Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
(0)   post-auth {
(0)     update {
(0)       No attributes updated
(0)     } # update = noop
(0) sql: EXPAND .query
(0) sql:    --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (4)
(0) sql: EXPAND %{User-Name}
(0) sql:    --> test
(0) sql: SQL-User-Name set to 'test'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')
(0) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', '0x018481e984212401f879eae27379964cf4', 'Access-Accept', '2016-02-09 05:09:41')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'test', '0x018481e984212401f879eae27379964cf4', 'Access-Accept', '2016-02-09 05:09:41')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (4)
(0)     [sql] = ok
(0)     [exec] = noop
(0)     policy remove_reply_message_if_eap {
(0)       if (&reply:EAP-Message && &reply:Reply-Message) {
(0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(0)       else {
(0)         [noop] = noop
(0)       } # else = noop
(0)     } # policy remove_reply_message_if_eap = noop
(0)   } # post-auth = ok
(0) Sent Access-Accept Id 100 from 192.168.0.98:1812 to 192.168.0.1:55429 length 0
(0)   Framed-Protocol = PPP
(0)   Framed-Compression = Van-Jacobson-TCP-IP
(0) Finished request
Waking up in 4.9 seconds.
Waking up in 9.9 seconds.
(1) Received Accounting-Request Id 101 from 192.168.0.1:59018 to 192.168.0.98:1813 length 147
(1)   Service-Type = Framed-User
(1)   Framed-Protocol = PPP
(1)   NAS-Port = 15731333
(1)   NAS-Port-Type = Ethernet
(1)   User-Name = "test"
(1)   Calling-Station-Id = "C0:4A:00:87:C6:D9"
(1)   Called-Station-Id = "service1"
(1)   NAS-Port-Id = "bridge1"
(1)   Acct-Session-Id = "81900849"
(1)   Framed-IP-Address = 0.0.0.0
(1)   Acct-Authentic = RADIUS
(1)   Event-Timestamp = "Feb  8 2016 18:48:07 BRST"
(1)   Acct-Status-Type = Start
(1)   NAS-Identifier = "Main_Router"
(1)   Acct-Delay-Time = 0
(1)   NAS-IP-Address = 192.168.0.1
(1) # Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
(1)   preacct {
(1)     [preprocess] = ok
(1)     policy acct_unique {
(1)       if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) {
(1)       EXPAND %{string:Class}
(1)          -->
(1)       if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i)  -> FALSE
(1)       else {
(1)         update request {
(1)           EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(1)              --> f7d16a7d01689686f3af959b4c2467af
(1)           &Acct-Unique-Session-Id := f7d16a7d01689686f3af959b4c2467af
(1)         } # update request = noop
(1)         EXPAND %{User-Name}
(1)            --> test
(1)         EXPAND %{Acct-Session-ID}
(1)            --> 81900849
(1)         EXPAND %{NAS-IPv6-Address}
(1)            -->
(1)         EXPAND %{NAS-IP-Address}
(1)            --> 192.168.0.1
(1)         EXPAND %{NAS-Identifier}
(1)            --> Main_Router
(1)         EXPAND %{NAS-Port-ID}
(1)            --> bridge1
(1)         EXPAND %{NAS-Port}
(1)            --> 15731333
(1)       } # else = noop
(1)     } # policy acct_unique = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "test", looking up realm NULL
(1) suffix: No such realm "NULL"
(1)     [suffix] = noop
(1)     [files] = noop
(1)   } # preacct = ok
(1) # Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
(1)   accounting {
(1) detail: EXPAND /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
(1) detail:    --> /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(1) detail: /usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.0.1/detail-20160209
(1) detail: EXPAND %t
(1) detail:    --> Tue Feb  9 05:09:42 2016
(1)     [detail] = ok
(1)     [unix] = ok
(1) sql: EXPAND %{tolower:type.%{Acct-Status-Type}.query}
(1) sql:    --> type.start.query
(1) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (0)
(1) sql: EXPAND %{User-Name}
(1) sql:    --> test
(1) sql: SQL-User-Name set to 'test'
(1) sql: EXPAND INSERT INTO radacct (acctsessionid,             acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')
(1) sql:    --> INSERT INTO radacct (acctsessionid,             acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('81900849', 'f7d16a7d01689686f3af959b4c2467af', 'test', '', '192.168.0.1', 'bridge1', 'Ethernet', FROM_UNIXTIME(1454964487), FROM_UNIXTIME(1454964487), NULL, '0', 'RADIUS', '', '', '0', '0', 'service1', 'C0:4A:00:87:C6:D9', '', 'Framed-User', 'PPP', '0.0.0.0')
(1) sql: Executing query: INSERT INTO radacct (acctsessionid,           acctuniqueid,           username, realm,                        nasipaddress,           nasportid, nasporttype,         acctstarttime,               acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,       connectinfo_stop,       acctinputoctets, acctoutputoctets,      calledstationid,     callingstationid, acctterminatecause,   servicetype,            framedprotocol, framedipaddress) VALUES ('81900849', 'f7d16a7d01689686f3af959b4c2467af', 'test', '', '192.168.0.1', 'bridge1', 'Ethernet', FROM_UNIXTIME(1454964487), FROM_UNIXTIME(1454964487), NULL, '0', 'RADIUS', '', '', '0', '0', 'service1', 'C0:4A:00:87:C6:D9', '', 'Framed-User', 'PPP', '0.0.0.0')
(1) sql: SQL query returned: success
(1) sql: 1 record(s) updated
rlm_sql (sql): Released connection (0)
(1)     [sql] = ok
(1)     [exec] = noop
(1) attr_filter.accounting_response: EXPAND %{User-Name}
(1) attr_filter.accounting_response:    --> test
(1) attr_filter.accounting_response: Matched entry DEFAULT at line 12
(1)     [attr_filter.accounting_response] = updated
(1)   } # accounting = updated
(1) Sent Accounting-Response Id 101 from 192.168.0.98:1813 to 192.168.0.1:59018 length 0
(1) Finished request
(1) Cleaning up request packet ID 101 with timestamp +10
Waking up in 9.9 seconds.
(0) Cleaning up request packet ID 100 with timestamp +9
Ready to process requests
^C

Best Regards
Fabricio

---
Este email foi escaneado pelo Avast antivírus.
http://www.avast.com

Viana

Alan DeKok

tags

participants (2)