Hi List Since hours i am trying to get dynamic vlan-assigning working with a Dell PowerConnect 3448 Switch and Freeradius 1.1.6. In my Users-File I have the following Default-Entry (like seen in some other tutorials, often used with Cisco-devices). DEFAULT Auth-Type := EAP Tunnel-Type = 13, Tunnel-Medium-Type = 6, Tunnel-Private-Group-Id = 110 The authentication succeed, but I don't fall in to the defined VLAN. (I always fall in to the Switch-Default-VLAN #1) Are there some kind of "special" settings with this DELL-Switch or is there an other solution for my problem? Thank you for your answers! Greetings Andre
Hi, I was just trying to do the same thing - the device has to support the VLAN settings from Radius, otherwise you are screwed :-( download the radius dictionary for powerconnect 3448 and look if the parameters are in here - in my case they were not and got ignored as well... Jan Schermer Linux Administrator ET NETERA | smart e-business solutions jan.schermer@etnetera.cz +420 608022225 ~ [ www.ahold.cz | www.annonce.cz | www.datart.cz ] [ www.knizniweb.cz | www.siemens.cz | www.cz.o2.com ] Created by ET NETERA | Powered by jNetPublish André Graf wrote:
Hi List
Since hours i am trying to get dynamic vlan-assigning working with a Dell PowerConnect 3448 Switch and Freeradius 1.1.6.
In my Users-File I have the following Default-Entry (like seen in some other tutorials, often used with Cisco-devices).
DEFAULT Auth-Type := EAP Tunnel-Type = 13, Tunnel-Medium-Type = 6, Tunnel-Private-Group-Id = 110
The authentication succeed, but I don't fall in to the defined VLAN. (I always fall in to the Switch-Default-VLAN #1)
Are there some kind of "special" settings with this DELL-Switch or is there an other solution for my problem?
Thank you for your answers!
Greetings Andre
------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi That could be the solution for my problem, because I didn't find one installed on the system. But where can I download this dictionary? :S Am 06.06.2007 um 08:28 schrieb Jan Schermer / ET NETERA:
Hi, I was just trying to do the same thing - the device has to support the VLAN settings from Radius, otherwise you are screwed :- ( download the radius dictionary for powerconnect 3448 and look if the parameters are in here - in my case they were not and got ignored as well...
Jan Schermer Linux Administrator ET NETERA | smart e-business solutions jan.schermer@etnetera.cz +420 608022225 ~ [ www.ahold.cz | www.annonce.cz | www.datart.cz ] [ www.knizniweb.cz | www.siemens.cz | www.cz.o2.com ]
Created by ET NETERA | Powered by jNetPublish
André Graf wrote:
Hi List Since hours i am trying to get dynamic vlan-assigning working with a Dell PowerConnect 3448 Switch and Freeradius 1.1.6. In my Users- File I have the following Default-Entry (like seen in some other tutorials, often used with Cisco-devices). DEFAULT Auth-Type := EAP Tunnel-Type = 13, Tunnel-Medium-Type = 6, Tunnel-Private-Group-Id = 110 The authentication succeed, but I don't fall in to the defined VLAN. (I always fall in to the Switch-Default-VLAN #1) Are there some kind of "special" settings with this DELL-Switch or is there an other solution for my problem? Thank you for your answers! Greetings Andre --------------------------------------------------------------------- --- - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/ users.html
participants (2)
-
André Graf -
Jan Schermer / ET NETERA