router, freeradius, freeipa
Hi, I have a feeling I'm really close to getting this to work. Spent a lot of time reading old posts and such. If I don't use mschap it works (first try). If I use mschap it doesn't (Second try). Fedora 31 server. [root@ldap raddb]# rpm -qi freeradius Name : freeradius Version : 3.0.20 Release : 1.fc31 Architecture: x86_64 Install Date: Thu 19 Dec 2019 02:50:05 PM EST [root@ldap raddb]# rpm -qi freeipa-server Name : freeipa-server Version : 4.8.3 Release : 1.fc31 Architecture: x86_64 Install Date: Thu 19 Dec 2019 01:36:44 AM EST [root@ldap ~]# radtest wifiuser testing1234 ldap.n-voice.com 1812 testing123 Sent Access-Request Id 163 from 0.0.0.0:40406 to 192.168.2.22:1812 length 78 User-Name = "wifiuser" User-Password = "testing1234" NAS-IP-Address = 192.168.2.22 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "testing1234" Received Access-Accept Id 163 from 192.168.2.22:1812 to 192.168.2.22:40406 length 20 [root@ldap ~]# radtest -t mschap wifiuser testing1234 ldap.n-voice.com 1812 testing123 Sent Access-Request Id 109 from 0.0.0.0:48868 to 192.168.2.22:1812 length 134 User-Name = "wifiuser" MS-CHAP-Password = "testing1234" NAS-IP-Address = 192.168.2.22 NAS-Port = 1812 Message-Authenticator = 0x00 Cleartext-Password = "testing1234" MS-CHAP-Challenge = 0xd1561e8a052a4ff6 MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000009a3c3b9778a207ed4 64ba7a33a14629b299382f9a534b726 Received Access-Reject Id 109 from 192.168.2.22:1812 to 192.168.2.22:48868 length 20 (0) -: Expected Access-Accept got Access-Reject [root@ldap ~]# [root@ldap raddb]# radiusd -X FreeRADIUS Version 3.0.20 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/unpack including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/ldap including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/date including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/detail.log including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/rfc7542 including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/canonicalization including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/control including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> shortname = "auth2" nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client private-network-1 { ipaddr = 192.168.2.0/24 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods- enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods- enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods- enabled/dynamic_clients # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_exec # Loading module "ntlm_auth" from file /etc/raddb/mods- enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key -- domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User- Password}" shell_escape = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods- enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods- enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods- enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods- enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods- config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods- config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap ldap { server = "localhost" identity = "cn=Directory Manager" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "cn=users,cn=accounts,dc=n-voice,dc=com" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods- enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:- unknown}" } # Loading module "sradutmp" from file /etc/raddb/mods- enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods- enabled/expiration # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods- enabled/preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_date # Loading module "date" from file /etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods- enabled/replicate # Loading module "auth_log" from file /etc/raddb/mods- enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods- enabled/detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods- enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods- enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP- Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } instantiate { } # Instantiating module "cache_eap" from file /etc/raddb/mods- enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/raddb/mods- enabled/always # Instantiating module "fail" from file /etc/raddb/mods- enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods- enabled/always # Instantiating module "invalid" from file /etc/raddb/mods- enabled/always # Instantiating module "userlock" from file /etc/raddb/mods- enabled/always # Instantiating module "notfound" from file /etc/raddb/mods- enabled/always # Instantiating module "noop" from file /etc/raddb/mods- enabled/always # Instantiating module "updated" from file /etc/raddb/mods- enabled/always # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "logintime" from file /etc/raddb/mods- enabled/logintime # Instantiating module "mschap" from file /etc/raddb/mods- enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/server.pem" certificate_file = "/etc/raddb/certs/server.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "PROFILE=SYSTEM" cipher_server_preference = no ecdh_curve = "prime256v1" disable_tlsv1 = yes disable_tlsv1_1 = yes tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } Please use tls_min_version and tls_max_version instead of disable_tlsv1 Please use tls_min_version and tls_max_version instead of disable_tlsv1_2 # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "etc_passwd" from file /etc/raddb/mods- enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "IPASS" from file /etc/raddb/mods- enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods- enabled/realm # Instantiating module "bangpath" from file /etc/raddb/mods- enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods- enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods- enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods- config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods- config/attr_filter/accounting_response # Instantiating module "files" from file /etc/raddb/mods- enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20447 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "linelog" from file /etc/raddb/mods- enabled/linelog # Instantiating module "log_accounting" from file /etc/raddb/mods- enabled/linelog # Instantiating module "detail" from file /etc/raddb/mods- enabled/detail # Instantiating module "expiration" from file /etc/raddb/mods- enabled/expiration # Instantiating module "preprocess" from file /etc/raddb/mods- enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "auth_log" from file /etc/raddb/mods- enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods- enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods- enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods- enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} Ignoring "sql" (see raddb/mods-available/README.rst) } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner- tunnel Listening on proxy address * port 51206 Listening on proxy address :: port 43983 Ready to process requests (0) Received Access-Request Id 163 from 192.168.2.22:40406 to 192.168.2.22:1812 length 78 (0) User-Name = "wifiuser" (0) User-Password = "testing1234" (0) NAS-IP-Address = 192.168.2.22 (0) NAS-Port = 1812 (0) Message-Authenticator = 0x209a8f3a29c9e325e76f8f9883568b49 (0) # Executing section authorize from file /etc/raddb/sites- enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "wifiuser", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop rlm_ldap (ldap): Reserved connection (0) (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (0) ldap: --> (uid=wifiuser) (0) ldap: Performing search in "cn=users,cn=accounts,dc=n-voice,dc=com" with filter "(uid=wifiuser)", scope "sub" (0) ldap: Waiting for search result... (0) ldap: User object found at DN "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Processing user attributes (0) ldap: control:Password-With-Header += '{PBKDF2_SHA256}AAAIAEhOrJwqZkQ2Xq6WP4lVdbpoUu6uUvswCNAcoxTx1yHPt79yzSK ZC1pPccla4Pmnkcj1HPeKF6zuWC0srkIND9fiJuG6Q3Npsd8la6B6smIqgt4mI0WhYtY2Us dGd2uloy15ST+tK+WO4pZfOJbZ4zI82qbd3zgzeD1QSnT/F0oxLZ4yUcr6aYbSi1/I4KCYP 6tJFb9Cnq8eXXbdp6JCpNw1VCn+a9TYrjCPkP+kwglCX28Ovq9zt8VX5K/19PysnChU9vaX ZWwbfiTk0rbissyoBcYIzruO73f18zsyWUYiXHpq0GyybK0d8X4ddC5DxRTDilzZ3GuCBUm uFNaviktPV66jfoMclpPI1LFRZJjND5T6/xSTTKIyO7GDrERM2HdX1oVElLKzdBCbu0IfhS kHw6dcYaJ2cx5DQM/tdv5u' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (0) [ldap] = updated (0) [expiration] = noop (0) [logintime] = noop (0) pap: Unknown header {PBKDF2_SHA256} in Password-With-Header, re- writing to Cleartext-Password (0) pap: Removing &control:Password-With-Header (0) [pap] = updated (0) if (User-Password) { (0) if (User-Password) -> TRUE (0) if (User-Password) { (0) update control { (0) Auth-Type := LDAP (0) } # update control = noop (0) } # if (User-Password) = noop (0) } # authorize = updated (0) Found Auth-Type = LDAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Auth-Type LDAP { rlm_ldap (ldap): Reserved connection (1) (0) ldap: Login attempt by "wifiuser" (0) ldap: Using user DN from request "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Waiting for bind result... (0) ldap: Bind successful (0) ldap: Bind as user "uid=wifiuser,cn=users,cn=accounts,dc=n- voice,dc=com" was successful rlm_ldap (ldap): Released connection (1) (0) [ldap] = ok (0) } # Auth-Type LDAP = ok (0) # Executing section post-auth from file /etc/raddb/sites- enabled/default (0) post-auth { (0) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) { (0) if (session-state:User-Name && reply:User-Name && request:User- Name && (reply:User-Name == request:User-Name)) -> FALSE (0) update { (0) No attributes updated for RHS &session-state: (0) } # update = noop (0) ldap: EXPAND . (0) ldap: --> . (0) ldap: EXPAND Authenticated at %S (0) ldap: --> Authenticated at 2019-12-19 19:24:44 rlm_ldap (ldap): Reserved connection (2) (0) ldap: Using user DN from request "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Modifying object with DN "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (0) ldap: Waiting for modify result... rlm_ldap (ldap): Released connection (2) (0) [ldap] = ok (0) [exec] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # post-auth = ok (0) Sent Access-Accept Id 163 from 192.168.2.22:1812 to 192.168.2.22:40406 length 0 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 109 from 192.168.2.22:48868 to 192.168.2.22:1812 length 134 (1) User-Name = "wifiuser" (1) NAS-IP-Address = 192.168.2.22 (1) NAS-Port = 1812 (1) Message-Authenticator = 0xdb1fd8ed25ede2827388f5af6d9302c3 (1) MS-CHAP-Challenge = 0xd1561e8a052a4ff6 (1) MS-CHAP-Response = 0x00010000000000000000000000000000000000000000000000009a3c3b9778a207ed4 64ba7a33a14629b299382f9a534b726 (1) # Executing section authorize from file /etc/raddb/sites- enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' (1) [mschap] = ok (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "wifiuser", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: No EAP-Message, not doing EAP (1) [eap] = noop (1) [files] = noop rlm_ldap (ldap): Reserved connection (3) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=wifiuser) (1) ldap: Performing search in "cn=users,cn=accounts,dc=n-voice,dc=com" with filter "(uid=wifiuser)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=wifiuser,cn=users,cn=accounts,dc=n-voice,dc=com" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '{PBKDF2_SHA256}AAAIAEhOrJwqZkQ2Xq6WP4lVdbpoUu6uUvswCNAcoxTx1yHPt79yzSK ZC1pPccla4Pmnkcj1HPeKF6zuWC0srkIND9fiJuG6Q3Npsd8la6B6smIqgt4mI0WhYtY2Us dGd2uloy15ST+tK+WO4pZfOJbZ4zI82qbd3zgzeD1QSnT/F0oxLZ4yUcr6aYbSi1/I4KCYP 6tJFb9Cnq8eXXbdp6JCpNw1VCn+a9TYrjCPkP+kwglCX28Ovq9zt8VX5K/19PysnChU9vaX ZWwbfiTk0rbissyoBcYIzruO73f18zsyWUYiXHpq0GyybK0d8X4ddC5DxRTDilzZ3GuCBUm uFNaviktPV66jfoMclpPI1LFRZJjND5T6/xSTTKIyO7GDrERM2HdX1oVElLKzdBCbu0IfhS kHw6dcYaJ2cx5DQM/tdv5u' rlm_ldap (ldap): Released connection (3) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://localhost:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: Unknown header {PBKDF2_SHA256} in Password-With-Header, re- writing to Cleartext-Password (1) pap: Removing &control:Password-With-Header (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) if (User-Password) { (1) if (User-Password) -> FALSE (1) } # authorize = updated (1) Found Auth-Type = mschap (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) mschap: Found Cleartext-Password, hashing to create NT-Password (1) mschap: ERROR: Failed generating NT-Password (1) [mschap] = fail (1) } # authenticate = fail (1) Failed to authenticate the user (1) Using Post-Auth-Type Reject (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Post-Auth-Type REJECT { (1) attr_filter.access_reject: EXPAND %{User-Name} (1) attr_filter.access_reject: --> wifiuser (1) attr_filter.access_reject: Matched entry DEFAULT at line 11 (1) [attr_filter.access_reject] = updated (1) [eap] = noop (1) policy remove_reply_message_if_eap { (1) if (&reply:EAP-Message && &reply:Reply-Message) { (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (1) else { (1) [noop] = noop (1) } # else = noop (1) } # policy remove_reply_message_if_eap = noop (1) } # Post-Auth-Type REJECT = updated (1) Delaying response for 1.000000 seconds Waking up in 0.2 seconds. Waking up in 0.7 seconds. (1) Sending delayed response (1) Sent Access-Reject Id 109 from 192.168.2.22:1812 to 192.168.2.22:48868 length 20 Waking up in 1.6 seconds. (0) Cleaning up request packet ID 163 with timestamp +5 Waking up in 2.3 seconds. Please let me know if I can provide anything else that would be useful. If there is a guide on how to get dd_wrt, freeradius and freeipa working I'd like to see that. I've read a bunch of them so far. This is the closest I can get. python3-samba-4.11.3-0.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST python3-libsss_nss_idmap-2.2.2-3.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST freeipa-server-trust-ad-4.8.3-1.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST python3-tevent-0.10.1-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST python3-tdb-1.4.2-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST python3-talloc-2.3.0-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST python3-ldb-2.0.7-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libtevent-devel-0.10.1-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libtdb-devel-1.4.2-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libtalloc-devel-2.3.0-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST libldb-devel-2.0.7-1.fc31.x86_64 Thu 19 Dec 2019 05:50:52 PM EST samba-4.11.3-0.fc31.x86_64 Thu 19 Dec 2019 04:34:11 PM EST freeradius-utils-3.0.20-1.fc31.x86_64 Thu 19 Dec 2019 02:50:05 PM EST freeradius-ldap-3.0.20-1.fc31.x86_64 Thu 19 Dec 2019 02:50:05 PM EST freeradius-3.0.20-1.fc31.x86_64 Thu 19 Dec 2019 02:50:05 PM EST perl-Math-Complex-1.59-449.fc31.noarch Thu 19 Dec 2019 02:50:02 PM EST perl-Math-BigInt-1.9998.16-439.fc31.noarch Thu 19 Dec 2019 02:50:02 PM EST perl-DBI-1.642-5.fc31.x86_64 Thu 19 Dec 2019 02:50:02 PM EST make-4.2.1-15.fc31.x86_64 Thu 19 Dec 2019 02:50:02 PM EST libyubikey-1.13-12.fc31.x86_64 Thu 19 Dec 2019 02:50:02 PM EST guile22-2.2.6-2.fc31.x86_64 Thu 19 Dec 2019 02:50:01 PM EST ykclient-2.15-9.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST perl-Time-HiRes-1.9760-439.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST libatomic_ops-7.6.10-2.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST gc-7.6.4-6.fc31.x86_64 Thu 19 Dec 2019 02:49:59 PM EST freeipa-server-dns-4.8.3-1.fc31.noarch Thu 19 Dec 2019 01:57:57 PM EST opendnssec-1.4.14-5.fc31.x86_64 Thu 19 Dec 2019 01:57:56 PM EST opencryptoki-libs-3.11.0-4.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST opencryptoki-icsftok-3.11.0-4.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST opencryptoki-3.11.0-4.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST ldns-1.7.0-26.fc31.x86_64 Thu 19 Dec 2019 01:57:55 PM EST libitm-9.2.1-1.fc31.x86_64 Thu 19 Dec 2019 01:57:54 PM EST bind-dyndb-ldap-11.2-2.fc31.x86_64 Thu 19 Dec 2019 01:36:45 AM EST freeipa-server-4.8.3-1.fc31.x86_64 Thu 19 Dec 2019 01:36:44 AM EST Thanks, Rob
On Dec 19, 2019, at 7:38 PM, Robert <rwt@n-voice.com> wrote:
I have a feeling I'm really close to getting this to work. Spent a lot of time reading old posts and such. If I don't use mschap it works (first try). If I use mschap it doesn't (Second try).
That's always the same issue: password formats. Please read the documentation about what to post to the list: http://wiki.freeradius.org/list-help We DON'T need to see the output of radclient. We DON'T need to see the output of tests which work.
(1) ldap: control:Password-With-Header += '{PBKDF2_SHA256}AAAIAEhOrJwqZkQ2Xq6WP4lVdbpoUu6uUvswCNAcoxTx1yHPt79yzSK ZC1pPccla4Pmnkcj1HPeKF6zuWC0srkIND9fiJuG6Q3Npsd8la6B6smIqgt4mI0WhYtY2Us dGd2uloy15ST+tK+WO4pZfOJbZ4zI82qbd3zgzeD1QSnT/F0oxLZ4yUcr6aYbSi1/I4KCYP 6tJFb9Cnq8eXXbdp6JCpNw1VCn+a9TYrjCPkP+kwglCX28Ovq9zt8VX5K/19PysnChU9vaX ZWwbfiTk0rbissyoBcYIzruO73f18zsyWUYiXHpq0GyybK0d8X4ddC5DxRTDilzZ3GuCBUm uFNaviktPV66jfoMclpPI1LFRZJjND5T6/xSTTKIyO7GDrERM2HdX1oVElLKzdBCbu0IfhS kHw6dcYaJ2cx5DQM/tdv5u' ... (1) pap: Unknown header {PBKDF2_SHA256} in Password-With-Header, re- writing to Cleartext-Password
That's pretty clear. The passwords are stored in a format that FreeRADIUS doesn't understand.
(1) mschap: Found Cleartext-Password, hashing to create NT-Password (1) mschap: ERROR: Failed generating NT-Password
Because the Cleartext-Password is *not* that big blob above.
Please let me know if I can provide anything else that would be useful.
When you join the list, you get sent an email with a link to the wiki. The email tells you what we need.
If there is a guide on how to get dd_wrt, freeradius and freeipa working I'd like to see that. I've read a bunch of them so far. This is the closest I can get.
The Wiki actually has pretty good documentation, as does the default configuration files. It's almost 2020. We don't recommend reading random web pages that are likely years out of date.
python3-samba-4.11.3-0.fc31.x86_64 Thu 19 Dec 2019 05:50:53 PM EST
We don't need to see lists of RPMs on the system. Read this web page. That page has existed for ~15 years, and documents protocol compatibly: http://deployingradius.com/documents/protocols/compatibility.html The "pap" test fails, because you're forcing "Auth-Type := LDAP". Which means that the LDAP module uses the users password to do a "bind as user" to LDAP. So the LDAP server does the authentication. LDAP servers do *not* support MS-CHAP authentication. Your choices are listed on the web page above. Alan DeKok.
participants (2)
-
Alan DeKok -
Robert