Hi *, I try to do an 802.1x authentication of Cisco access points on Aruba switches against Freeradius 3.0.21-1 under Debian 10.6. The APs prefer to do EAP-FAST so I enabled the relevant parts in modules-enabled/eap but whenever a EAP-FAST request arrives now, it throws this: (2) eap: Calling submodule eap_fast to process data (2) eap_fast: Authenticate (2) eap_fast: Continuing EAP-TLS (2) eap_fast: [eaptls verify] = ok (2) eap_fast: Done initial handshake (2) eap_fast: (other): before SSL initialization (2) eap_fast: >>> send TLS 1.3 [length 0002] (2) eap_fast: ERROR: TLS Alert write:fatal:internal error tls: TLS_accept: Error in error (2) eap_fast: ERROR: Failed in __FUNCTION__ (SSL_read): error:141FC044:SSL routines:tls_setup_handshake:internal error (2) eap_fast: ERROR: System call (I/O) error (-1) (2) eap_fast: ERROR: TLS receive handshake failed during operation (2) eap_fast: ERROR: [eaptls process] = fail (2) eap: ERROR: Failed continuing EAP FAST (43) session. EAP sub-module failed I tried to change tls_max_version from 1.2 to 1.3 but that didn't change anything. Is there anything I can do here or is this an issue with OpenSSL (1.1.1d-0+deb10u3)? Thanks Sebastian Full debug output: root@radius:/etc/freeradius/sites-enabled# freeradius -X FreeRADIUS Version 3.0.21 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/dictionary including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/mods-enabled/ including configuration file /etc/freeradius/mods-enabled/logintime including configuration file /etc/freeradius/mods-enabled/chap including configuration file /etc/freeradius/mods-enabled/realm including configuration file /etc/freeradius/mods-enabled/dynamic_clients including configuration file /etc/freeradius/mods-enabled/expr including configuration file /etc/freeradius/mods-enabled/unpack including configuration file /etc/freeradius/mods-enabled/cache_eap including configuration file /etc/freeradius/mods-enabled/always including configuration file /etc/freeradius/mods-enabled/linelog including configuration file /etc/freeradius/mods-enabled/exec including configuration file /etc/freeradius/mods-enabled/preprocess including configuration file /etc/freeradius/mods-enabled/date including configuration file /etc/freeradius/mods-enabled/files including configuration file /etc/freeradius/mods-enabled/pap including configuration file /etc/freeradius/mods-enabled/unix including configuration file /etc/freeradius/mods-enabled/radutmp including configuration file /etc/freeradius/mods-enabled/digest including configuration file /etc/freeradius/mods-enabled/eap including configuration file /etc/freeradius/mods-enabled/replicate including configuration file /etc/freeradius/mods-enabled/ldap including configuration file /etc/freeradius/mods-enabled/passwd including configuration file /etc/freeradius/mods-enabled/expiration including configuration file /etc/freeradius/mods-enabled/counter including configuration file /etc/freeradius/mods-enabled/attr_filter including configuration file /etc/freeradius/mods-enabled/sradutmp including configuration file /etc/freeradius/mods-enabled/mschap including configuration file /etc/freeradius/mods-enabled/detail including configuration file /etc/freeradius/mods-enabled/utf8 including configuration file /etc/freeradius/mods-enabled/echo including configuration file /etc/freeradius/mods-enabled/detail.log including configuration file /etc/freeradius/mods-enabled/soh including files in directory /etc/freeradius/policy.d/ including configuration file /etc/freeradius/policy.d/dhcp including configuration file /etc/freeradius/policy.d/canonicalization including configuration file /etc/freeradius/policy.d/control including configuration file /etc/freeradius/policy.d/filter including configuration file /etc/freeradius/policy.d/cui including configuration file /etc/freeradius/policy.d/eap including configuration file /etc/freeradius/policy.d/rfc7542 including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/policy.d/abfab-tr including configuration file /etc/freeradius/policy.d/operator-name including configuration file /etc/freeradius/policy.d/debug including configuration file /etc/freeradius/policy.d/accounting including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/switches including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client switches { ipaddr = 0.0.0.0/0 require_message_authenticator = no secret = <<< secret >>> virtual_server = "switches" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached systemd watchdog is disabled # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/mods-enabled/chap # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_date # Loading module "date" from file /etc/freeradius/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/mods-enabled/files files { filename = "/etc/freeradius/mods-config/files/authorize" acctusersfile = "/etc/freeradius/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy" } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_radutmp # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/mods-enabled/digest # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/mods-enabled/ldap ldap { server = "10.16.1.1" identity = "cn=ldap-admin,dc=lender,dc=schule" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no allow_dangling_group_ref = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=lender,dc=schule" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration # Loaded module rlm_counter # Loading module "daily" from file /etc/freeradius/mods-enabled/counter counter daily { filename = "/etc/freeradius/db.daily" key = "User-Name" reset = "daily" count_attribute = "Acct-Session-Time" counter_name = "Daily-Session-Time" check_name = "Max-Daily-Session" reply_name = "Session-Timeout" allowed_service_type = "Framed-User" cache_size = 5000 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8 # Loading module "echo" from file /etc/freeradius/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/mods-enabled/soh soh { dhcp = yes } instantiate { } # Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm # Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always # Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog # Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/mods-config/preprocess/hints # Instantiating module "files" from file /etc/freeradius/mods-enabled/files reading pairlist file /etc/freeradius/mods-config/files/authorize reading pairlist file /etc/freeradius/mods-config/files/accounting reading pairlist file /etc/freeradius/mods-config/files/pre-proxy # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.pem" certificate_file = "/etc/freeradius/certs/server.pem" ca_file = "/etc/freeradius/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "1.2" tls_min_version = "1.2" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Linked to sub-module rlm_eap_fast fast { tls = "tls-common" default_eap_type = "mschapv2" virtual_server = "inner-tunnel" cipher_list = "ALL:!EXPORT:!eNULL:!SSLv2@SECLEVEL=0" require_client_cert = no pac_lifetime = 604800 authority_identity = "lender" pac_opaque_key = "4f971fe7d4f45bbda3a518eef331156a" copy_request_to_tunnel = no use_tunneled_reply = no } tls: Using cached TLS configuration from previous invocation # Instantiating module "ldap" from file /etc/freeradius/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20447 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://10.16.1.1:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://10.16.1.1:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://10.16.1.1:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://10.16.1.1:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://10.16.1.1:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration # Instantiating module "daily" from file /etc/freeradius/mods-enabled/counter rlm_counter: Current Time: 1603903984 [2020-10-28 17:53:04], Next reset 1603926000 [2020-10-29 00:00:00] rlm_counter: add_defaults: Start rlm_counter: DEFAULT1 set to 1603926000 rlm_counter: DEFAULT2 set to 1603903984 rlm_counter: add_defaults: End # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail # Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/radiusd.conf } # server server switches { # from file /etc/freeradius/sites-enabled/switches # Loading authenticate {...} # Loading authorize {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/switches:21 # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/switches:78 # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/switches:86 } # server switches server default { # from file /etc/freeradius/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/sites-enabled/inner-tunnel:336 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 53659 Listening on proxy address :: port 45470 Ready to process requests (0) Received Access-Request Id 219 from 172.16.4.20:1812 to 172.16.8.2:1812 length 364 (0) Framed-MTU = 1492 (0) NAS-IP-Address = 172.16.4.20 (0) NAS-Identifier = "sw-rz" (0) User-Name = "cisco-wlan-ap" (0) Service-Type = Framed-User (0) Framed-Protocol = PPP (0) NAS-Port = 23 (0) NAS-Port-Type = Ethernet (0) NAS-Port-Id = "23" (0) Called-Station-Id = "c4-34-6b-3c-2b-c0" (0) Calling-Station-Id = "6c-41-0e-cd-ac-30" (0) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (0) Tunnel-Type:0 = VLAN (0) Tunnel-Medium-Type:0 = IEEE-802 (0) Tunnel-Private-Group-Id:0 = "5" (0) EAP-Message = 0x0249001201636973636f2d776c616e2d6170 (0) Message-Authenticator = 0x2faab9ea03d2ced2a5f7fbeca82a2a19 (0) MS-RAS-Vendor = 11 (0) HP-Capability-Advert = 0x011a0000000b28 (0) HP-Capability-Advert = 0x011a0000000b2e (0) HP-Capability-Advert = 0x011a0000000b30 (0) HP-Capability-Advert = 0x011a0000000b3d (0) HP-Capability-Advert = 0x011a0000000b18 (0) HP-Capability-Advert = 0x011a0000000b19 (0) HP-Capability-Advert = 0x0138 (0) HP-Capability-Advert = 0x013a (0) HP-Capability-Advert = 0x0140 (0) HP-Capability-Advert = 0x0141 (0) HP-Capability-Advert = 0x0151 (0) # Executing section authorize from file /etc/freeradius/sites-enabled/switches (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "cisco-wlan-ap", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 73 length 18 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/sites-enabled/switches (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 74 length 22 (0) eap: EAP session adding &reply:State = 0xa7a68f51a7ec8b50 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/sites-enabled/switches (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 219 from 172.16.8.2:1812 to 172.16.4.20:1812 length 0 (0) EAP-Message = 0x014a00160410c64d7f100e998f122f408287f929b594 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xa7a68f51a7ec8b5005c9621f1a63c87e (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 220 from 172.16.4.20:1812 to 172.16.8.2:1812 length 370 (1) Framed-MTU = 1492 (1) NAS-IP-Address = 172.16.4.20 (1) NAS-Identifier = "sw-rz" (1) User-Name = "cisco-wlan-ap" (1) Service-Type = Framed-User (1) Framed-Protocol = PPP (1) NAS-Port = 23 (1) NAS-Port-Type = Ethernet (1) NAS-Port-Id = "23" (1) Called-Station-Id = "c4-34-6b-3c-2b-c0" (1) Calling-Station-Id = "6c-41-0e-cd-ac-30" (1) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (1) Tunnel-Type:0 = VLAN (1) Tunnel-Medium-Type:0 = IEEE-802 (1) Tunnel-Private-Group-Id:0 = "5" (1) State = 0xa7a68f51a7ec8b5005c9621f1a63c87e (1) EAP-Message = 0x024a0006032b (1) Message-Authenticator = 0x27a72d3e8750b7672955801bad7fefd8 (1) MS-RAS-Vendor = 11 (1) HP-Capability-Advert = 0x011a0000000b28 (1) HP-Capability-Advert = 0x011a0000000b2e (1) HP-Capability-Advert = 0x011a0000000b30 (1) HP-Capability-Advert = 0x011a0000000b3d (1) HP-Capability-Advert = 0x011a0000000b18 (1) HP-Capability-Advert = 0x011a0000000b19 (1) HP-Capability-Advert = 0x0138 (1) HP-Capability-Advert = 0x013a (1) HP-Capability-Advert = 0x0140 (1) HP-Capability-Advert = 0x0141 (1) HP-Capability-Advert = 0x0151 (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/sites-enabled/switches (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "cisco-wlan-ap", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 74 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (&(objectclass=ldUserAccount)(uid=%{mschap:User-Name})(objectclass=posixAccount)(ldAllowWLAN=yes)) (1) ldap: --> (&(objectclass=ldUserAccount)(uid=cisco-wlan-ap)(objectclass=posixAccount)(ldAllowWLAN=yes)) (1) ldap: Performing search in "dc=lender,dc=schule" with filter "(&(objectclass=ldUserAccount)(uid=cisco-wlan-ap)(objectclass=posixAccount)(ldAllowWLAN=yes))", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=cisco-wlan-ap,ou=users,dc=lender,dc=schule" (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += '<<secret>>' (1) ldap: reply:LD-User-Role := 'misc' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://10.16.1.1:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) if ("&reply:LD-User-Role" == "student") { (1) if ("&reply:LD-User-Role" == "student") -> FALSE (1) [expiration] = noop (1) [logintime] = noop (1) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (1) pap: Removing &control:Password-With-Header (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/sites-enabled/switches (1) authenticate { (1) eap: Expiring EAP session with state 0xa7a68f51a7ec8b50 (1) eap: Finished EAP session with state 0xa7a68f51a7ec8b50 (1) eap: Previous EAP request found for state 0xa7a68f51a7ec8b50, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type FAST (43) (1) eap: Calling submodule eap_fast to process data (1) eap_fast: Initiating new TLS session (1) eap_fast: Over-riding main cipher list with 'ALL:!EXPORT:!eNULL:!SSLv2@SECLEVEL=0' (1) eap: Sending EAP Request (code 1) ID 75 length 26 (1) eap: EAP session adding &reply:State = 0xa7a68f51a6eda450 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/sites-enabled/switches (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 220 from 172.16.8.2:1812 to 172.16.4.20:1812 length 0 (1) EAP-Message = 0x014b001a2b210004001043e561fc584ef009b5ee5bbd2e6eb162 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xa7a68f51a6eda45005c9621f1a63c87e (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 221 from 172.16.4.20:1812 to 172.16.8.2:1812 length 465 (2) Framed-MTU = 1492 (2) NAS-IP-Address = 172.16.4.20 (2) NAS-Identifier = "sw-rz" (2) User-Name = "cisco-wlan-ap" (2) Service-Type = Framed-User (2) Framed-Protocol = PPP (2) NAS-Port = 23 (2) NAS-Port-Type = Ethernet (2) NAS-Port-Id = "23" (2) Called-Station-Id = "c4-34-6b-3c-2b-c0" (2) Calling-Station-Id = "6c-41-0e-cd-ac-30" (2) Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" (2) Tunnel-Type:0 = VLAN (2) Tunnel-Medium-Type:0 = IEEE-802 (2) Tunnel-Private-Group-Id:0 = "5" (2) State = 0xa7a68f51a6eda45005c9621f1a63c87e (2) EAP-Message = 0x024b00652b01160301005a010000560303af1be254fff550fbc7e7ca012365e8833993201bd8cc4422d3979670e3018d1d000004003400ff01000029000d0020001e060106020603050105020503040104020403030103020303020102020203000f000101 (2) Message-Authenticator = 0x0f9c5b45dbdfcb9b1a51b913c01e53e7 (2) MS-RAS-Vendor = 11 (2) HP-Capability-Advert = 0x011a0000000b28 (2) HP-Capability-Advert = 0x011a0000000b2e (2) HP-Capability-Advert = 0x011a0000000b30 (2) HP-Capability-Advert = 0x011a0000000b3d (2) HP-Capability-Advert = 0x011a0000000b18 (2) HP-Capability-Advert = 0x011a0000000b19 (2) HP-Capability-Advert = 0x0138 (2) HP-Capability-Advert = 0x013a (2) HP-Capability-Advert = 0x0140 (2) HP-Capability-Advert = 0x0141 (2) HP-Capability-Advert = 0x0151 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/sites-enabled/switches (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "cisco-wlan-ap", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 75 length 101 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated rlm_ldap (ldap): Reserved connection (1) (2) ldap: EXPAND (&(objectclass=ldUserAccount)(uid=%{mschap:User-Name})(objectclass=posixAccount)(ldAllowWLAN=yes)) (2) ldap: --> (&(objectclass=ldUserAccount)(uid=cisco-wlan-ap)(objectclass=posixAccount)(ldAllowWLAN=yes)) (2) ldap: Performing search in "dc=lender,dc=schule" with filter "(&(objectclass=ldUserAccount)(uid=cisco-wlan-ap)(objectclass=posixAccount)(ldAllowWLAN=yes))", scope "sub" (2) ldap: Waiting for search result... (2) ldap: User object found at DN "uid=cisco-wlan-ap,ou=users,dc=lender,dc=schule" (2) ldap: Processing user attributes (2) ldap: control:Password-With-Header += '<<secret>>' (2) ldap: reply:LD-User-Role := 'misc' rlm_ldap (ldap): Released connection (1) (2) [ldap] = updated (2) if ("&reply:LD-User-Role" == "student") { (2) if ("&reply:LD-User-Role" == "student") -> FALSE (2) [expiration] = noop (2) [logintime] = noop (2) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (2) pap: Removing &control:Password-With-Header (2) pap: WARNING: Auth-Type already set. Not setting to PAP (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/sites-enabled/switches (2) authenticate { (2) eap: Expiring EAP session with state 0xa7a68f51a6eda450 (2) eap: Finished EAP session with state 0xa7a68f51a6eda450 (2) eap: Previous EAP request found for state 0xa7a68f51a6eda450, released from the list (2) eap: Peer sent packet with method EAP FAST (43) (2) eap: Calling submodule eap_fast to process data (2) eap_fast: Authenticate (2) eap_fast: Continuing EAP-TLS (2) eap_fast: [eaptls verify] = ok (2) eap_fast: Done initial handshake (2) eap_fast: (other): before SSL initialization (2) eap_fast: >>> send TLS 1.3 [length 0002] (2) eap_fast: ERROR: TLS Alert write:fatal:internal error tls: TLS_accept: Error in error (2) eap_fast: ERROR: Failed in __FUNCTION__ (SSL_read): error:141FC044:SSL routines:tls_setup_handshake:internal error (2) eap_fast: ERROR: System call (I/O) error (-1) (2) eap_fast: ERROR: TLS receive handshake failed during operation (2) eap_fast: ERROR: [eaptls process] = fail (2) eap: ERROR: Failed continuing EAP FAST (43) session. EAP sub-module failed (2) eap: Sending EAP Failure (code 4) ID 75 length 4 (2) eap: Failed in EAP select (2) [eap] = invalid (2) } # authenticate = invalid (2) Failed to authenticate the user (2) Using Post-Auth-Type Reject (2) # Executing group from file /etc/freeradius/sites-enabled/switches (2) Post-Auth-Type REJECT { (2) attr_filter.access_reject: EXPAND %{User-Name} (2) attr_filter.access_reject: --> cisco-wlan-ap (2) attr_filter.access_reject: Matched entry DEFAULT at line 11 (2) [attr_filter.access_reject] = updated (2) [eap] = noop (2) policy remove_reply_message_if_eap { (2) if (&reply:EAP-Message && &reply:Reply-Message) { (2) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (2) else { (2) [noop] = noop (2) } # else = noop (2) } # policy remove_reply_message_if_eap = noop (2) } # Post-Auth-Type REJECT = updated (2) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (2) Sending delayed response (2) Sent Access-Reject Id 221 from 172.16.8.2:1812 to 172.16.4.20:1812 length 44 (2) EAP-Message = 0x044b0004 (2) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 219 with timestamp +1 (1) Cleaning up request packet ID 220 with timestamp +1 (2) Cleaning up request packet ID 221 with timestamp +1 Ready to process requests