I upgraded to 2.0.2 but still have a problem with reading detail (to do copy-acct-to-home-server ): It only processes the first request of the detail file and stops after receiving the accouting response. May some one help me? here follows part of freeradius -X: Polling for detail file /var/log/freeradius/radacct/detail detail_recv: Read packet from /var/log/freeradius/radacct/detail User-Name = "DFXMFhhp@XXX" Acct-Status-Type = Stop Acct-Session-Id = "0302003F28000772-47B49055" .... server copy-acct-to-home-server { +- entering group preacct rlm_realm: Looking up realm "XXX" for User-Name = "DFXMFhhp@XXX" rlm_realm: Found realm "XXX" rlm_realm: Proxying request from user DFXMFhhp to realm XXX rlm_realm: Adding Realm = "XXX" rlm_realm: Preparing to proxy accounting request to realm "XXX" ++[suffix] returns updated +- entering group accounting ++[ok] returns ok } # server copy-acct-to-home-server Sending Accounting-Request of id 21 to a.b.c.d port 1813 User-Name = "DFXMFhhp@XXX" Acct-Status-Type = Stop Acct-Session-Id = "0302003F28000772-47B49055" .... Proxying request 2 to home server a.b.c.d port 1813 Sending Accounting-Request of id 21 to a.b.c.d port 1813 User-Name = "DFXMFhhp@XXX" Acct-Status-Type = Stop Acct-Session-Id = "0302003F28000772-47B49055" .... Going to the next request Waking up in 0.5 seconds. rad_recv: Accounting-Response packet from host a.b.c.d port 1813, id=21, length=27 Proxy-State = 0x3438353131 server copy-acct-to-home-server { } # server copy-acct-to-home-server Finished request 2. Going to the next request Waking up in 0.5 seconds. Cleaning up request 0 ID 211 with timestamp +15