Ahh so something very fundimental then How do I chage the request type? -----Original Message----- From: Ivan Kalik [mailto:tnt@kalik.net] Sent: 04 March 2008 11:32 To: FreeRadius users mailing list Subject: RE: Cisco AVpairs again.
rad_recv: Access-Request packet from host 212.95.252.25 port 49365, id=20, length=73 NAS-IP-Address = 10.10.11.78 NAS-Port = 0 Cisco-NAS-Port = "tty0" NAS-Port-Type = Async User-Name = "tom" User-Password = "pass1"
This is a dialin not login request. Ivan Kalik Kalik Informatika ISP - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Cisco documentation. It will say how to log into the device. Ivan Kalik Kalik Informatika ISP Dana 4/3/2008, "David Bell" <David.Bell@dxi.net> piše:
Ahh so something very fundimental then
How do I chage the request type?
-----Original Message----- From: Ivan Kalik [mailto:tnt@kalik.net] Sent: 04 March 2008 11:32 To: FreeRadius users mailing list Subject: RE: Cisco AVpairs again.
rad_recv: Access-Request packet from host 212.95.252.25 port 49365, id=20, length=73 NAS-IP-Address = 10.10.11.78 NAS-Port = 0 Cisco-NAS-Port = "tty0" NAS-Port-Type = Async User-Name = "tom" User-Password = "pass1"
This is a dialin not login request.
Ivan Kalik Kalik Informatika ISP
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
who give some data of performace?
Hi,
who give some data of performace?
what, exactly, are you after - requests per second etc? it all depends on what you DO in the PERL module. if you make calls to a DB in the PERL then that would be the bottleneck. personally we use rlm_perl and i believe it should have been taken out of 'experimental' back in the 1.1.4 days.... alan
participants (4)
-
A.L.M.Buxey＠lboro.ac.uk -
David Bell -
Dongheping -
Ivan Kalik