Question about the new sql client behaivour in 3.0.22

25 May 2021

      Hi list, I just upgraded to 3.0.22 and I have a question about an issue I just ran into. I see in the changelog there's some changes to how clients are loaded.

Previously I was using the nas table via MySQL to load clients into the global list for all my virtual servers. With 3.0.22 I can see the clients successfully loaded but freeradius is then ignoring any accounting requests from those clients with:

radiusd[32025]: Ignoring request to acct address * port 1821 bound to server combined from unknown client 192.168.10.215 port 37819 proto udp

I resolved the issue by putting the clients into clients.conf with the following basic config for now
client radius01.syd1 {
        ipaddr          = 192.168.10.215
        secret          = [..]
}

and for reference the previously working SQL configuration for that client

mysql> SELECT * FROM radius.nas WHERE nasname = '192.168.10.215';
+----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+
| id | nasname        | shortname     | type  | ports | secret   | server | community | description |
+----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+
| 85 | 192.168.10.215 | radius01.syd1 | other |  NULL | [..]| NULL   | NULL      |             |
+----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+
1 row in set (0.00 sec)

radmin shows the following slight differences after loading both

radmin> show client list verbose
client radius01.syd1 {
        ipaddr = 192.168.10.215/32
        proto = udp
        secret = [..]
        longname = 192.168.10.215
        shortname = radius01.syd1
        number = 0
        global = yes
}

client {
        ipaddr = 192.168.10.215/32
        proto = *
        secret = [...]
        longname = 192.168.10.215
        shortname = radius01.syd1
        nas_type = other
        number = 47
        dynamic = yes
        lifetime = 0
        global = yes
}

My question is what am I doing wrong here that the client loaded from sql isn't working? 

I thought it might be the changes around client loading but radmin shows that it was successfully loaded as a global client and not tied to a single virtualhost.

Thanks,
Boden

radiusd -X output
FreeRADIUS Version 3.0.22
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/sql
including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/raddb/mods-enabled/sqlippool
including configuration file /etc/raddb/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail.my-company.net.au
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/combined-walled-garden
including configuration file /etc/raddb/sites-enabled/combined-walled-garden-nbn
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/coa
including configuration file /etc/raddb/sites-enabled/decoupled-accounting-my-company
including configuration file /etc/raddb/sites-enabled/status
main {
security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
}
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 4096
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
log {
        stripped_names = no
        auth = yes
        auth_badpass = yes
        auth_goodpass = yes
        msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
        allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
realm DEFAULT {
}
radiusd: #### Loading Clients ####
client radius01.syd1 {
        ipaddr = 192.168.10.215
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
}
client radius02.syd1 {
        ipaddr = 192.168.10.222
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Autz-Type = Status-Server
radiusd: #### Instantiating modules ####
modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
        filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
        filename = "/etc/raddb/mods-config/files/visp_users"
        acctusersfile = "/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = yes
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
  realm bangpath {
        format = "prefix"
        delimiter = "!"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/raddb/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "192.168.10.206"
        port = 3306
        login = "radius"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = yes
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
        authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
        auto_escape = no
   accounting {
        reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,          acctuniqueid,           username, realm,                  nasipaddress,           nasportid, nasporttype,            acctstarttime,          acctupdatetime, acctstoptime,           acctsessiontime,        acctauthentic, connectinfo_start,      connectinfo_stop,       acctinputoctets, acctoutputoctets,       calledstationid,        callingstationid, acctterminatecause,     servicetype,            framedprotocol, framedipaddress,        framedipv6address,      framedipv6prefix, framedipv6pool,         delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-IPv6-Pool}', '%{Delegated-IPv6-Prefix}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  = (@acctupdatetime_old:=acctupdatetime), acctupdatetime  = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval    = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedipv6pool = '%{Framed-IPv6-Pool}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime    = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        query = "INSERT INTO radpostauth (username, pass, reply, authdate, downstream, upstream) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M', '%{request:Actual-Data-Rate-Downstream}', '%{request:Actual-Data-Rate-Upstream}' )"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
  # Loaded module rlm_sqlippool
  # Loading module "sqlippool" from file /etc/raddb/mods-enabled/sqlippool
  sqlippool {
        sql_module_instance = "sql"
        lease_duration = 3600
        pool_name = "Pool-Name"
        default_pool = "main_pool"
        attribute_name = "Framed-IP-Address"
        allocate_begin = "START TRANSACTION"
        allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
        allocate_clear_timeout = 1
        allocate_existing = ""
        allocate_requested = ""
        allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND ( expiry_time < NOW() OR expiry_time IS NULL OR expiry_time = 0 OR ( nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port-Id}' ) ) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
        allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I'"
        allocate_commit = "COMMIT"
        pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
        start_begin = ""
        start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
        start_commit = ""
        alive_begin = ""
        alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
        alive_commit = ""
        stop_begin = ""
        stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
        stop_commit = ""
        on_begin = ""
        on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
        on_commit = ""
        off_begin = ""
        off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
        off_commit = ""
   messages {
        exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
        success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
        clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
        failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
        nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
   }
  }
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
        utc = no
  }
  # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
  date wispr2date {
        format = "%Y-%m-%dT%H:%M:%S"
        utc = no
  }
  # Loading module "detail.my-company.net.au" from file /etc/raddb/mods-enabled/detail.my-company.net.au
  detail detail.my-company.net.au {
        filename = "/var/log/radius/radacct/detail-%Y%m%d:%H:%G"
        header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/visp_users
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.6.45
   mysql {
    tls {
        tls_required = no
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 10
        min = 10
        max = 40
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 600
        retry_delay = 1
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 40 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 39 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 38 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 37 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 36 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (5), 1 of 35 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (6), 1 of 34 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (7), 1 of 33 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (8), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (9), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 203.23.236.6 (VIC-LNS) to global clients list
rlm_sql (203.23.236.6): Client "VIC-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.26 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.26): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.46 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.46): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.226 (Station) to global clients list
rlm_sql (192.168.10.226): Client "Station" (sql) added
rlm_sql (sql): Adding client 202.172.107.74 (Astro) to global clients list
rlm_sql (202.172.107.74): Client "Astro" (sql) added
rlm_sql (sql): Adding client 202.172.107.75 (VM2) to global clients list
rlm_sql (202.172.107.75): Client "VM2" (sql) added
rlm_sql (sql): Adding client 203.23.236.80 (Raven) to global clients list
rlm_sql (203.23.236.80): Client "Raven" (sql) added
rlm_sql (sql): Adding client 203.23.236.2 (3G-LNS) to global clients list
rlm_sql (203.23.236.2): Client "3G-LNS" (sql) added
rlm_sql (sql): Adding client 124.254.72.146 (ISPOne-radius-1) to global clients list
rlm_sql (124.254.72.146): Client "ISPOne-radius-1" (sql) added
rlm_sql (sql): Adding client 124.254.72.147 (ISPOne-radius-2) to global clients list
rlm_sql (124.254.72.147): Client "ISPOne-radius-2" (sql) added
rlm_sql (sql): Adding client 203.194.28.131 (SOUL1) to global clients list
rlm_sql (203.194.28.131): Client "SOUL1" (sql) added
rlm_sql (sql): Adding client 10.20.20.2 (ADSL-LNS) to global clients list
rlm_sql (10.20.20.2): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.194.28.132 (SOUL2) to global clients list
rlm_sql (203.194.28.132): Client "SOUL2" (sql) added
rlm_sql (sql): Adding client 203.194.56.120 (SOUL3) to global clients list
rlm_sql (203.194.56.120): Client "SOUL3" (sql) added
rlm_sql (sql): Adding client 203.194.56.121 (SOUL4) to global clients list
rlm_sql (203.194.56.121): Client "SOUL4" (sql) added
rlm_sql (sql): Adding client 203.194.59.120 (SOUL5) to global clients list
rlm_sql (203.194.59.120): Client "SOUL5" (sql) added
rlm_sql (sql): Adding client 203.194.59.121 (SOUL6) to global clients list
rlm_sql (203.194.59.121): Client "SOUL6" (sql) added
rlm_sql (sql): Adding client 203.221.163.160 (SOUL7) to global clients list
rlm_sql (203.221.163.160): Client "SOUL7" (sql) added
rlm_sql (sql): Adding client 203.221.11.41 (SOUL8) to global clients list
rlm_sql (203.221.11.41): Client "SOUL8" (sql) added
rlm_sql (sql): Adding client 203.194.23.101 (SOUL9) to global clients list
rlm_sql (203.194.23.101): Client "SOUL9" (sql) added
rlm_sql (sql): Adding client 127.0.0.1 (localhost) to global clients list
rlm_sql (127.0.0.1): Client "localhost" (sql) added
rlm_sql (sql): Adding client 203.23.236.121 (new-titan) to global clients list
rlm_sql (203.23.236.121): Client "new-titan" (sql) added
rlm_sql (sql): Adding client 203.23.236.146 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.146): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.66 (Angel) to global clients list
rlm_sql (203.23.236.66): Client "Angel" (sql) added
rlm_sql (sql): Adding client 202.172.107.251 (ADSL-LNS) to global clients list
rlm_sql (202.172.107.251): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.195 (Station Eris) to global clients list
rlm_sql (192.168.10.195): Client "Station Eris" (sql) added
rlm_sql (sql): Adding client 203.23.236.30 (NBN-LNS) to global clients list
rlm_sql (203.23.236.30): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.46 (ADSL-LNS) to global clients list
Ignoring duplicate client 203.23.236.46
rlm_sql (203.23.236.46): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.58 (NBN-LNS) to global clients list
rlm_sql (203.23.236.58): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.154 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.154): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.202 (crimson) to global clients list
rlm_sql (192.168.10.202): Client "crimson" (sql) added
rlm_sql (sql): Adding client 203.23.236.54 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.54): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.205 (Station Galaxy) to global clients list
rlm_sql (192.168.10.205): Client "Station Galaxy" (sql) added
rlm_sql (sql): Adding client 203.23.236.50 (NBN-LNS) to global clients list
rlm_sql (203.23.236.50): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 10.10.100.2 (NBN-LNS-2) to global clients list
rlm_sql (10.10.100.2): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 10.10.200.2 (NBN-LNS-2) to global clients list
rlm_sql (10.10.200.2): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 10.10.100.5 (NBN-LNS-2) to global clients list
rlm_sql (10.10.100.5): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 10.10.200.5 (NBN-LNS-2) to global clients list
rlm_sql (10.10.200.5): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 203.29.125.11 (noc3) to global clients list
rlm_sql (203.29.125.11): Client "noc3" (sql) added
rlm_sql (sql): Adding client 203.23.236.11 (NBN-LNS-2) to global clients list
rlm_sql (203.23.236.11): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 203.23.237.13 (NBN-LNS-3) to global clients list
rlm_sql (203.23.237.13): Client "NBN-LNS-3" (sql) added
rlm_sql (sql): Adding client 192.168.10.208 (behemoth) to global clients list
rlm_sql (192.168.10.208): Client "behemoth" (sql) added
rlm_sql (sql): Adding client 203.23.237.12 (NBN-LNS-2) to global clients list
rlm_sql (203.23.237.12): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 202.172.100.9 (NBN-LNS) to global clients list
rlm_sql (202.172.100.9): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 202.172.100.35 (NBN-LNS) to global clients list
rlm_sql (202.172.100.35): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.237.11 (NBN-LNS) to global clients list
rlm_sql (203.23.237.11): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.215 (radius01.syd1) to global clients list
rlm_sql (192.168.10.215): Client "radius01.syd1" (sql) added
rlm_sql (sql): Adding client 192.168.10.222 (radius02.syd1) to global clients list
rlm_sql (192.168.10.222): Client "radius02.syd1" (sql) added
rlm_sql (sql): Released connection (0)
  # Instantiating module "sqlippool" from file /etc/raddb/mods-enabled/sqlippool
Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1"
  # Instantiating module "detail.my-company.net.au" from file /etc/raddb/mods-enabled/detail.my-company.net.au
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server combined { # from file /etc/raddb/sites-enabled/combined-walled-garden
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server combined
server combined-nbn { # from file /etc/raddb/sites-enabled/combined-walled-garden-nbn
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server combined-nbn
server coa { # from file /etc/raddb/sites-enabled/coa
# Loading recv-coa {...}
# Loading send-coa {...}
} # server coa
server read-detail.my-company.net.au { # from file /etc/raddb/sites-enabled/decoupled-accounting-my-company
# Loading preacct {...}
# Loading accounting {...}
} # server read-detail.my-company.net.au
server status { # from file /etc/raddb/sites-enabled/status
# Loading authorize {...}
Compiling Autz-Type Status-Server for attr Autz-Type
} # server status
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "control"
listen {
        socket = "/var/run/radiusd/radiusd.sock"
        mode = "rw"
        peercred = yes
}
}
listen {
        type = "coa"
        virtual_server = "coa"
        ipaddr = *
        port = 3799
client radius01.syd1 {
        ipaddr = 192.168.10.215
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
}
Ignoring duplicate client 192.168.10.215
client radius02.syd1 {
        ipaddr = 192.168.10.222
        require_message_authenticator = no
        secret = <<< secret >>>
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
}
Ignoring duplicate client 192.168.10.222
}
listen {
        type = "auth"
        ipaddr = *
        port = 1815
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 1816
}
listen {
        type = "auth"
        ipaddr = *
        port = 1820
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
}
listen {
        type = "acct"
        ipaddr = *
        port = 1821
}
listen {
        type = "detail"
  listen {
        filename = "/var/log/radius/radacct/detail-*:*"
        load_factor = 70
        poll_interval = 1
        retry_interval = 30
        one_shot = no
        track = yes
  }
}
listen {
        type = "status"
        ipaddr = 127.0.0.1
        port = 18121
  client admin {
        ipaddr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
   }
  }
}
Listening on command file /var/run/radiusd/radiusd.sock
Listening on coa address * port 3799 bound to server coa
Listening on auth address * port 1815 bound to server combined
Listening on acct address * port 1816 bound to server combined
Listening on auth address * port 1820 bound to server combined-nbn
Listening on acct address * port 1821 bound to server combined-nbn
Listening on detail file /var/log/radius/radacct/detail-*:* as server read-detail.my-company.net.au
Listening on status address 127.0.0.1 port 18121 bound to server status
Ready to process requests

bpbp＠fastmail.com

Alan DeKok

tags

participants (2)