Hello, I am quite new to the Freeradius topic and I have got a problem: First of all I started with this tutorial: http://www.wi-fitechnology.com/Papers+req-showcontent-id-1-page-2.html But I did not get it running. Then I changed the configuration to this: 00-19-d2-2a-61-50 Auth-Type := Accept In the debug log I can see, that it should work. Without encryption it works, but as soon as I configure any kind of static encryption (WEP, WPA) on the ap, I won´t get any connection. Where could I search for a failure? Regards Klaus My Equipment: - Access Point: HP J8131A Wireless Access Point 420 - Radius: Freeradius 1.1.5 Windows build running on Virtual PC with Windows XP Prof. - Wlan Clients: Lenovo T60 with Windows XP Prof. Wavin GmbH - Sitz der Gesellschaft: 49767 Twist - Registergericht: AG Osnabrück Abt. B 120003 - Geschäftsführung: Jürgen Frei, Maarten Roef - Vors.d. Aufsichtsrates: Henk ten Hove
Klaus.Albers@wavin.de wrote:
Hello,
I am quite new to the Freeradius topic and I have got a problem: First of all I started with this tutorial: http://www.wi-fitechnology.com/Papers+req-showcontent-id-1-page-2.html
But I did not get it running. Then I changed the configuration to this:
00-19-d2-2a-61-50 Auth-Type := Accept
In the debug log I can see, that it should work. Without encryption it works, but as soon as I configure any kind of static encryption (WEP, WPA) on the ap, I won´t get any connection.
Where could I search for a failure?
Could you run freeradius in debug mode radiusd -X and post the relevant output, then we'll get a better idea of whats going on.
Regards Klaus
My Equipment:
- Access Point: HP J8131A Wireless Access Point 420
I have one of those too hehe ! -- Arran Cudbard-Bell (A.Cudbard-Bell@sussex.ac.uk) Authentication, Authorisation and Accounting Officer Infrastructure Services | ENG1 E1-1-08 University Of Sussex, Brighton EXT:01273 873900 | INT: 3900
Klaus.Albers@wavin.de wrote:
In the debug log I can see, that it should work. Without encryption it works, but as soon as I configure any kind of static encryption (WEP, WPA) on the ap, I won´t get any connection.
What do you mean by that? When WEP or WPA is used, the AP doesn't contact the RADIUS server for anything. So any connection problems are between the AP and the client device. RADIUS is completely out of the picture. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog
Alan Dekok wrote:
Klaus.Albers@wavin.de wrote:
In the debug log I can see, that it should work. Without encryption it works, but as soon as I configure any kind of static encryption (WEP, WPA) on the ap, I won´t get any connection.
What do you mean by that?
When WEP or WPA is used, the AP doesn't contact the RADIUS server for anything. So any connection problems are between the AP and the client device. RADIUS is completely out of the picture.
Eh ? Surely it does for *MAC* based authentication, which is what hes using judging by the users file entry... -- Arran Cudbard-Bell (A.Cudbard-Bell@sussex.ac.uk) Authentication, Authorisation and Accounting Officer Infrastructure Services | ENG1 E1-1-08 University Of Sussex, Brighton EXT:01273 873900 | INT: 3900
Arran Cudbard-Bell wrote:
Surely it does for *MAC* based authentication, which is what hes using judging by the users file entry...
If that has been configured, yes. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog
Do you mean you are not getting any Access-Reqest packets? Problem is hardly with radius then. Ivan Kalik Kalik Informatika ISP Dana 13/6/2007, "Klaus.Albers@wavin.de" <Klaus.Albers@wavin.de> piše:
Hello,
I am quite new to the Freeradius topic and I have got a problem: First of all I started with this tutorial: http://www.wi-fitechnology.com/Papers+req-showcontent-id-1-page-2.html
But I did not get it running. Then I changed the configuration to this:
00-19-d2-2a-61-50 Auth-Type := Accept
In the debug log I can see, that it should work. Without encryption it works, but as soon as I configure any kind of static encryption (WEP, WPA) on the ap, I won´t get any connection.
Where could I search for a failure?
Regards Klaus
My Equipment:
- Access Point: HP J8131A Wireless Access Point 420 - Radius: Freeradius 1.1.5 Windows build running on Virtual PC with Windows XP Prof. - Wlan Clients: Lenovo T60 with Windows XP Prof.
Wavin GmbH - Sitz der Gesellschaft: 49767 Twist - Registergericht: AG Osnabrück Abt. B 120003 - Geschäftsführung: Jürgen Frei, Maarten Roef - Vors.d. Aufsichtsrates: Henk ten Hove
participants (4)
-
Alan Dekok -
Arran Cudbard-Bell -
Klaus.Albers＠wavin.de -
tnt＠kalik.co.yu