Virtual server can't set reply attributes

5 Sep 2014


      Hi,
My configuration include two local virtual servers for two differnt
realms. Everything was fine on freeradius 2.2.5.
Now I try to move configuration to the release 3 (3.0.4 rc2).
I have a problem with attributes set on the local virual server.
These attributes found in the SQL, but not returned to the NAS with
Access-Accept. (debug output below)
User 'test1' has own attribute in the radreply SQL table:
SELECT * FROM radreply WHERE username = 'test1';
+------+----------+--------------+----+------------------------------------------------+
| id   | username | attribute    | op | value
                |
+------+----------+--------------+----+------------------------------------------------+
| 8880 | test1    | Cisco-AVPair | += | "Cisco-AVPair +=
"ip:inacl=ACL_VIRT_SECURE_IN" |
+------+----------+--------------+----+------------------------------------------------+
Configuration files:
proxy.conf:
---
proxy server {
        default_fallback = no
}
realm NULL {
    virtual_server = srv_null
}
realm nofilter {
    virtual_server = srv_nofilter
}
---
/sites-enabled/srv_default:
---
server default {
 listen {
  type = auth
  ipaddr = *
 }

 listen {
  ipaddr = *
  port = 0
  type = acct
 }

 authorize {
  preprocess
  suffix
 }

 authenticate {
 }

 preacct {
  preprocess
  suffix
 }
 accounting {
 }
 session {
 }
 post-auth {
  Post-Auth-Type REJECT {
   attr_filter.access_reject
  }
 }
 pre-proxy {
 }
 post-proxy {
 }
}
/sites-enabled/srv_null:
---
#realm NULL
server srv_null{
 authorize {
  preprocess
  chap
  files
  sql
  expiration
  logintime
 }
 authenticate {
  Auth-Type CHAP {
   chap
  }
 }
 preacct {
  preprocess
  acct_unique
  files
 }
 accounting {
  sql
  attr_filter.accounting_response
 }
 session {
 }
 post-auth {
 }
 pre-proxy {
 }
 post-proxy {
 }
}
---
Debug:
radiusd: FreeRADIUS Version 3.0.4, for host x86_64-unknown-linux-gnu,
built on Aug 25 2014 at 21:38:35
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including configuration file /usr/local/etc/raddb/proxy.conf
including configuration file /usr/local/etc/raddb/clients.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file /usr/local/etc/raddb/mods-enabled/dhcp
including configuration file /usr/local/etc/raddb/mods-enabled/dynamic_clients
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/passwd
including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including configuration file /usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file
/usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/accounting
including configuration file /usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/cui
OPTIMIZING no yes --> FALSE
OPTIMIZING no yes --> FALSE
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file /usr/local/etc/raddb/policy.d/operator-name
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/srv_default
including configuration file /usr/local/etc/raddb/sites-enabled/srv_null
including configuration file /usr/local/etc/raddb/sites-enabled/srv_nofilter
main {
 security {
        allow_core_dumps = no
 }
}
main {
        name = "radiusd"
        prefix = "/usr/local"
        localstatedir = "/usr/local/var"
        sbindir = "/usr/local/sbin"
        logdir = "/usr/local/var/log/radius"
        run_dir = "/usr/local/var/run/radiusd"
        libdir = "/usr/local/lib"
        radacctdir = "/usr/local/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 1024
        pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/local/sbin/checkrad"
        debug_level = 0
        proxy_requests = yes
 log {
        stripped_names = no
        auth = no
        auth_badpass = no
        auth_goodpass = no
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 security {
        max_attributes = 200
        reject_delay = 1
        status_server = yes
        allow_vulnerable_openssl = "no"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 realm NULL {
        virtual_server = srv_null
 }
 realm nofilter {
        virtual_server = srv_nofilter
 }
radiusd: #### Loading Clients ####
 client local {
        ipv4addr = 127.0.0.1
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "localtest"
        nas_type = "other"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client er3 {
        ipv4addr = x.x.53.3
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "c7200"
        nas_type = "cisco"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client er4 {
        ipv4addr = x.x.53.4
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "asr1001"
        nas_type = "cisco"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
 client test_mt {
        ipv4addr = x.x.54.38
        require_message_authenticator = no
        secret = <<< secret >>>
        shortname = "RB2011"
        nas_type = "other"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_always
  # Instantiating module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "ok" from file /usr/local/etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Instantiating module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/usr/local/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 16384
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
  # Loaded module rlm_detail
  # Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
  detail {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail auth_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail reply_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
        header = "%t"
        permissions = 384
        locking = no
        log_packet_header = no
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /usr/local/etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/usr/local/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "md5"
        timer_expire = 60
        ignore_unknown_eap_types = no
        mod_accounting_username_bug = no
        max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
        challenge = "Password: "
        auth_type = "PAP"
   }
rlm_eap (EAP): Ignoring EAP method tls because we do not have OpenSSL support
rlm_eap (EAP): Ignoring EAP method ttls because we do not have OpenSSL support
rlm_eap (EAP): Ignoring EAP method peap because we do not have OpenSSL support
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = no
   }
  # Loaded module rlm_exec
  # Instantiating module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Instantiating module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
  files {
        filename = "/usr/local/etc/raddb/mods-config/files/authorize"
        usersfile = "/usr/local/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/usr/local/etc/raddb/mods-config/files/pre-proxy"
        compat = "cistron"
  }
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
[/usr/local/etc/raddb/mods-config/files/authorize]:181 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:188 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:195 Cistron
compatibility checks for entry DEFAULT ...
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
[/usr/local/etc/raddb/mods-config/files/authorize]:181 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:188 Cistron
compatibility checks for entry DEFAULT ...
[/usr/local/etc/raddb/mods-config/files/authorize]:195 Cistron
compatibility checks for entry DEFAULT ...
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/usr/local/var/log/radius/linelog"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/usr/local/var/log/radius/linelog-accounting"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
  logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = no
        require_strong = no
        with_ntdomain_hack = yes
   passchange {
   }
        allow_retry = yes
  }
  # Instantiating module "ntlm_auth" from file
/usr/local/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/path/to/ntlm_auth --request-nt-key
--domain=MYDOMAIN --username=%{mschap:User-Name}
--password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file
/usr/local/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Crypt-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/usr/local/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Instantiating module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Instantiating module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file
/usr/local/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Instantiating module "sradutmp" from file
/usr/local/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/usr/local/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/usr/local/var/log/radius/radwtmp"
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file
/usr/local/etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
  # Loaded module rlm_sql
  # Instantiating module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "x.x.52.142"
        port = "3306"
        login = "radius"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = no
        delete_stale_sessions = yes
        sql_user_name = "%{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
        authorize_check_query = "SELECT id, username, attribute,
value, op FROM radcheck WHERE username = BINARY '%{SQL-User-Name}'
ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute,
value, op FROM radreply WHERE username = BINARY '%{SQL-User-Name}'
ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname,
attribute, Value, op FROM radgroupcheck WHERE groupname =
'%{Sql-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname,
attribute, value, op FROM radgroupreply WHERE groupname =
'%{Sql-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = BINARY '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = ""
        simul_verify_query = "SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
acctstoptime IS NULL"
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
  }
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
   }
   post-auth {
        reference = ".query"
   }
   mysql {
    tls {
    }
   }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 4
        max = 32
        spare = 3
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 1
        spread = no
   }
rlm_sql (sql): Opening additional connection (0)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (1)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (2)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (3)
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql (sql): Opening additional connection (4)
rlm_sql_mysql: Starting connect to MySQL server
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/srv_default
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading post-auth {...}
} # server default
server srv_null { # from file /usr/local/etc/raddb/sites-enabled/srv_null
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
} # server srv_null
server srv_nofilter { # from file
/usr/local/etc/raddb/sites-enabled/srv_nofilter
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading preacct {...}
 # Loading accounting {...}
} # server srv_nofilter
radiusd: #### Opening IP addresses and Ports ####
listen {
        type = "auth"
        ipaddr = *
        port = 0
}
listen {
        type = "acct"
        ipaddr = *
        port = 0
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Ready to process requests

Received Access-Request Id 38 from x.x.53.4:1645 to x.x.52.133:1812 length 121
        Framed-Protocol = PPP
        User-Name = 'test1'
        CHAP-Password = 0x01c53d540bddb15b80873d70e7b797de19
        Calling-Station-Id = '0024.c435.f7e4'
        NAS-Port-Type = Ethernet
        NAS-Port = 33554632
        NAS-Port-Id = '0/0/2/200'
        Connect-Info = 'POL_Vlan200_500M'
        Service-Type = Framed-User
        NAS-IP-Address = x.x.53.4
(0) Received Access-Request packet from host x.x.53.4 port 1645,
id=38, length=121
(0)     Framed-Protocol = PPP
(0)     User-Name = 'test1'
(0)     CHAP-Password = 0x01c53d540bddb15b80873d70e7b797de19
(0)     Calling-Station-Id = '0024.c435.f7e4'
(0)     NAS-Port-Type = Ethernet
(0)     NAS-Port = 33554632
(0)     NAS-Port-Id = '0/0/2/200'
(0)     Connect-Info = 'POL_Vlan200_500M'
(0)     Service-Type = Framed-User
(0)     NAS-IP-Address = x.x.53.4
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/srv_default
(0)   authorize {
(0)   [preprocess] = ok
(0)  suffix : Checking for suffix after "@"
(0)  suffix : No '@' in User-Name = "test1", looking up realm NULL
(0)  suffix : Found realm "NULL"
(0)  suffix : Adding Stripped-User-Name = "test1"
(0)  suffix : Adding Realm = "NULL"
(0)  suffix : Proxying request from user test1 to realm NULL
(0)  suffix : Preparing to proxy authentication request to realm "NULL"
(0)   [suffix] = updated
(0)  } #  authorize = updated
Proxying to virtual server srv_null
(0) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/srv_null
(0)   authorize {
(0)   [preprocess] = ok
(0)  chap : Setting 'Auth-Type := CHAP'
(0)   [chap] = ok
(0)  files : users: Matched entry DEFAULT at line 181
(0)   [files] = ok
(0)  sql : EXPAND %{%{Stripped-User-Name}:-%{%{User-Name}:-DEFAULT}}
(0)  sql :    --> test1
(0)  sql : SQL-User-Name set to 'test1'
rlm_sql (sql): Reserved connection (4)
(0)  sql : EXPAND SELECT id, username, attribute, value, op FROM
radcheck WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id
(0)  sql :    --> SELECT id, username, attribute, value, op FROM
radcheck WHERE username = BINARY 'test1' ORDER BY id
rlm_sql (sql): Executing query: 'SELECT id, username, attribute,
value, op FROM radcheck WHERE username = BINARY 'test1' ORDER BY id'
(0)  sql : User found in radcheck table
(0)  sql : Check items matched
(0)  sql : EXPAND SELECT id, username, attribute, value, op FROM
radreply WHERE username = BINARY '%{SQL-User-Name}' ORDER BY id
(0)  sql :    --> SELECT id, username, attribute, value, op FROM
radreply WHERE username = BINARY 'test1' ORDER BY id
rlm_sql (sql): Executing query: 'SELECT id, username, attribute,
value, op FROM radreply WHERE username = BINARY 'test1' ORDER BY id'
(0)  sql : User found in radreply table
(0)  sql : EXPAND SELECT groupname FROM radusergroup WHERE username =
BINARY '%{SQL-User-Name}' ORDER BY priority
(0)  sql :    --> SELECT groupname FROM radusergroup WHERE username =
BINARY 'test1' ORDER BY priority
rlm_sql (sql): Executing query: 'SELECT groupname FROM radusergroup
WHERE username = BINARY 'test1' ORDER BY priority'
(0)  sql : User not found in any groups
rlm_sql (sql): Released connection (4)
rlm_sql (sql): Closing connection (0), from 1 unused connections
rlm_sql_mysql: Socket destructor called, closing socket
(0)   [sql] = ok
(0)   [expiration] = noop
(0)   [logintime] = noop
(0)  } #  authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /usr/local/etc/raddb/sites-enabled/srv_null
(0)  Auth-Type CHAP {
(0)  chap : Login attempt by "test1" with CHAP password
(0)  chap : Comparing with "known good" Cleartext-Password
(0)  chap : CHAP user "test1" authenticated successfully
(0)   [chap] = ok
(0)  } # Auth-Type CHAP = ok
(0) Found Auth-Type = Accept
(0) Auth-Type = Accept, accepting the user
(0) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/srv_default
(0) Sending Access-Accept packet to host x.x.53.4 port 1645, id=38, length=0
Sending Access-Accept Id 38 from x.x.52.133:1812 to x.x.53.4:1645
(0) Finished request
Waking up in 0.3 seconds.
(...)
-- 
Please help. Thx,
Paul

Paul

Alan DeKok

tags

participants (2)