I need to get the NAS-IP-Address attribute from the Accounting request and not from the Access request because because I am working with a WDS environment. These are the access and accounting requests: rad_recv: Access-Request packet from host 10.33.0.33 port 1645, id=36, length=211 User-Name = "user" Framed-MTU = 1400 Called-Station-Id = "00-19-56-B0-90-18" Calling-Station-Id = "00-1B-77-89-00-15" Cisco-AVPair = "ssid=SECURE" Service-Type = Login-User Message-Authenticator = 0x04664bdb23657848c1dfe846b6e162f6 EAP-Message = 0x020c002b190017030100208aa24d178243e49e8315219bac17f793f2b933eec5b NAS-Port-Type = Wireless-802.11 NAS-Port = 10677114 NAS-Port-Id = "10677114" State = 0xec6d109ee561091c536a9f8f173c1470 NAS-IP-Address = 10.33.0.33 rad_recv: Accounting-Request packet from host 10.33.11.33 port 1646, id=43, length=231 Acct-Session-Id = "000033C4" Called-Station-Id = "00-16-47-93-68-E2" Calling-Station-Id = "00-1B-77-89-00-15" Cisco-AVPair = "ssid=SECURE" Cisco-AVPair = "vlan-id=123" Cisco-AVPair = "nas-location=unspecified" User-Name = "user" Cisco-AVPair = "connect-progress=Call Up" Acct-Status-Type = Start NAS-Port-Type = Wireless-802.11 Cisco-NAS-Port = "13454" NAS-Port = 13454 Service-Type = Framed-User NAS-IP-Address = 10.33.11.33 Acct-Delay-Time = 0 As you can see the NAS-IP-Address attributes are different, and I need a method to get the value of the accounting request because when I need to for example deauthenticate a user, i need to know what access point is is actually associated to. Any solutions or hints are very much appreciated. -- View this message in context: http://freeradius.1045715.n5.nabble.com/Accessing-radwho-information-or-acco... Sent from the FreeRadius - User mailing list archive at Nabble.com.