Hi there! We're trying to set up Freeradius wtih 8021x. Freeradius should query a OpenLDAP server for autentication and check if the user belongs to certain groups and return different VLAN IDs depending on that. Unfortunately, we're having issues with the LDAP autentication part. We only managed to get it to work with radtest. Example command: $ radtest testuser4 testpass4 localhost 1812 testing123 But to accomplish that we had to uncomment these lines in sites-enabled/default: # Uncomment it if you want to use ldap for authentication # # Note that this means "check plain-text password against # the ldap database", which means that EAP won't work, # as it does not supply a plain-text password. #Auth-Type LDAP { # ldap #} As the comment states, this works with radtest but not with EAP. We do our tests with a Macbook Pro running Mac OS X 10.7.4. If I comment the above lines again, freeradius rejects the request. Passwords are stored as cleartext in ldap. I'm looking at the ldap queries performed by freeradius it is only checking if the user exists. No password check at all. This the output of freeradius -X while using our test laptop: -----8<------ FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on Nov 14 2010 at 21:12:30 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/perl including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/otp including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/dynamic_clients including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/ntlm_auth including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/opendirectory including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/smsotp including configuration file /etc/freeradius/modules/cui including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/default including configuration file /etc/freeradius/sites-enabled/inner-tunnel main { user = "freerad" group = "freerad" allow_core_dumps = no } including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = yes zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 194.236.60.0/24 { require_message_authenticator = no secret = "somesecret" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating module "exec" from file /etc/freeradius/modules/exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating module "expr" from file /etc/freeradius/modules/expr Module: Linked to module rlm_expiration Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating module "pap" from file /etc/freeradius/modules/pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating module "chap" from file /etc/freeradius/modules/chap Module: Linked to module rlm_mschap Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating module "unix" from file /etc/freeradius/modules/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating module "eap" from file /etc/freeradius/eap.conf eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 4096 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 CA_path = "/etc/freeradius/certs" pem_file_type = yes private_key_file = "/etc/freeradius/certs/server.key" certificate_file = "/etc/freeradius/certs/server.pem" CA_file = "/etc/freeradius/certs/ca.pem" private_key_password = "whatever" dh_file = "/etc/freeradius/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/freeradius/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } verify { } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating module "files" from file /etc/freeradius/modules/files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Linked to module rlm_ldap Module: Instantiating module "ldap" from file /etc/freeradius/modules/ldap ldap { server = "haldap.int.sto.spotify.net" port = 389 password = "somepasswd" identity = "uid=freeradius_ldap,cn=users,dc=host,dc=in,dc=a,dc=domain,dc=net" net_timeout = 1 timeout = 4 timelimit = 3 tls_mode = no start_tls = no tls_require_cert = "allow" tls { start_tls = no require_cert = "allow" } basedn = "DC=host,DC=in,DC=a,DC=domain,DC=net" filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})" base_filter = "(objectclass=radiusprofile)" auto_header = no access_attr_used_for_allow = yes groupname_attribute = "cn" groupmembership_filter = "(&(objectclass=apple-group)(memberUid=%{User-Name}))" dictionary_mapping = "/etc/freeradius/ldap.attrmap" ldap_debug = 0 ldap_connections_number = 5 compare_check_items = no do_xlat = yes edir_account_policy_check = no set_auth_type = yes } rlm_ldap: Registering ldap_groupcmp for Ldap-Group rlm_ldap: Registering ldap_xlat with xlat_name ldap rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in the "authenticate" section. rlm_ldap: reading ldap<->radius mappings from file /etc/freeradius/ldap.attrmap rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$ rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network rlm_ldap: LDAP radiusClass mapped to RADIUS Class rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS Framed-AppleTalk-Link rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS Framed-AppleTalk-Network rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS Framed-AppleTalk-Zone rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS Tunnel-Private-Group-Id conns: 0xa9c8f0 Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { # from file /etc/freeradius/radiusd.conf modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_digest Module: Instantiating module "digest" from file /etc/freeradius/modules/digest Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating module "detail" from file /etc/freeradius/modules/detail detail { detailfile = "/var/log/freeradius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter attr_filter attr_filter.accounting_response { attrsfile = "/etc/freeradius/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=25, length=217 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" EAP-Message = 0x028f000d016672616e63657363 Message-Authenticator = 0x0db21bd2c7b5dcf5562053f41f4b9e2b # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 143 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok [ldap] performing user authorization for testuser4 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> testuser4 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=testuser4) [ldap] expand: DC=host,DC=in,DC=a,DC=domain,DC=net -> DC=host,DC=in,DC=a,DC=domain,DC=net [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] attempting LDAP reconnection [ldap] (re)connect to haldap.int.sto.spotify.net:389, authentication 0 [ldap] bind as uid=freeradius_ldap,cn=users,dc=host,dc=in,dc=a,dc=domain,dc=net/somepasswd to haldap.int.sto.spotify.net:389 [ldap] waiting for bind result ... [ldap] Bind was successful [ldap] performing search in DC=host,DC=in,DC=a,DC=domain,DC=net, with filter (uid=testuser4) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SASL}testuser4@SPOTIFY.NET" [ldap] looking for reply items in directory... [ldap] user testuser4 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found unknown header {{SASL}}: Not doing anything [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] EAP Identity [eap] processing type md5 rlm_eap_md5: Issuing Challenge ++[eap] returns handled Sending Access-Challenge of id 25 to 194.236.60.6 port 1438 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x019000160410f44fc318a9b15bdded328eeb09dc194f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c973372159771a4c8d5d9438e5c8c8 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=26, length=228 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c973372159771a4c8d5d9438e5c8c8 EAP-Message = 0x029000060319 Message-Authenticator = 0xe8bd2b07f3fd0ac471adac170c24f681 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 144 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated [files] users: Matched entry DEFAULT at line 172 ++[files] returns ok [ldap] performing user authorization for testuser4 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> testuser4 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=testuser4) [ldap] expand: DC=host,DC=in,DC=a,DC=domain,DC=net -> DC=host,DC=in,DC=a,DC=domain,DC=net [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in DC=host,DC=in,DC=a,DC=domain,DC=net, with filter (uid=testuser4) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SASL}testuser4@SPOTIFY.NET" [ldap] looking for reply items in directory... [ldap] user testuser4 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found unknown header {{SASL}}: Not doing anything [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] EAP-NAK asked for EAP-Type/peap [eap] processing type tls [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 26 to 194.236.60.6 port 1438 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x019100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c9733720586a1a4c8d5d9438e5c8c8 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=27, length=354 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c9733720586a1a4c8d5d9438e5c8c8 EAP-Message = 0x0291008419800000007a16030100750100007103015006ea1a6a261693e45d56951bdf2ab629d1cdbb0cfd14babcfc0660e52a659c000036c00ac009c007c008c013c014c011c012c004c005c002c003c00ec00fc00cc00d002f000500040035000a00320033003800390016001301000012000a00080006001700180019000b00020100 Message-Authenticator = 0x4ba49e5403066e3dec33fd466957677c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 145 length 132 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 122 [peap] Length Included [peap] eaptls_verify returned 11 [peap] (other): before/accept initialization [peap] TLS_accept: before/accept initialization [peap] <<< TLS 1.0 Handshake [length 0075], ClientHello [peap] TLS_accept: SSLv3 read client hello A [peap] >>> TLS 1.0 Handshake [length 002a], ServerHello [peap] TLS_accept: SSLv3 write server hello A [peap] >>> TLS 1.0 Handshake [length 02d4], Certificate [peap] TLS_accept: SSLv3 write certificate A [peap] >>> TLS 1.0 Handshake [length 0004], ServerHelloDone [peap] TLS_accept: SSLv3 write server done A [peap] TLS_accept: SSLv3 flush data [peap] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 27 to 194.236.60.6 port 1438 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x4502687e7035107baa4454b9fc8a3279edd794635ce6ba16030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c97337235b6a1a4c8d5d9438e5c8c8 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=28, length=560 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c97337235b6a1a4c8d5d9438e5c8c8 EAP-Message = 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 EAP-Message = 0xbec1e583d51e15e0775799fb2fedc91e30465f04f48e733c1403010001011603010030a3f977700de3d38fda560ec1f9f6ea8c2e1322df84d7ce1a060c7bc3b35631beeba2998c1a409eee6b7cb7ee558b343a Message-Authenticator = 0xd711fe582d9b5cd194ed166907f68314 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 146 length 253 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS TLS Length 326 [peap] Length Included [peap] eaptls_verify returned 11 [peap] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [peap] TLS_accept: SSLv3 read client key exchange A [peap] <<< TLS 1.0 ChangeCipherSpec [length 0001] [peap] <<< TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 read finished A [peap] >>> TLS 1.0 ChangeCipherSpec [length 0001] [peap] TLS_accept: SSLv3 write change cipher spec A [peap] >>> TLS 1.0 Handshake [length 0010], Finished [peap] TLS_accept: SSLv3 write finished A [peap] TLS_accept: SSLv3 flush data [peap] (other): SSL negotiation finished successfully SSL Connection Established [peap] eaptls_process returned 13 [peap] EAPTLS_HANDLED ++[eap] returns handled Sending Access-Challenge of id 28 to 194.236.60.6 port 1438 EAP-Message = 0x01930041190014030100010116030100308694c16e1732bbd663ab1fec150c4fff3d6d83ab7b30a81cfe129511de7942d8d8027d2b881bbbb51027216138c147cd Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c97337225a6a1a4c8d5d9438e5c8c8 Finished request 3. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=29, length=228 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c97337225a6a1a4c8d5d9438e5c8c8 EAP-Message = 0x029300061900 Message-Authenticator = 0x4c81d4f9c40214c6153e062989a8833c # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 147 length 6 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] Received TLS ACK [peap] ACK handshake is finished [peap] eaptls_verify returned 3 [peap] eaptls_process returned 3 [peap] EAPTLS_SUCCESS [peap] Session established. Decoding tunneled attributes. [peap] Peap state TUNNEL ESTABLISHED ++[eap] returns handled Sending Access-Challenge of id 29 to 194.236.60.6 port 1438 EAP-Message = 0x0194002b19001703010020b9116214add324abd801cacf1ab59a6b27a3fee99b7d812b7caa85b899f969cc Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c97337255d6a1a4c8d5d9438e5c8c8 Finished request 4. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=30, length=265 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c97337255d6a1a4c8d5d9438e5c8c8 EAP-Message = 0x0294002b19001703010020416f52107037b88b1de08c35b2dd1218afe123747d53e5f9643b47a2da3a69ce Message-Authenticator = 0xc68800a0978696090a2eb9bb1e0003e7 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 148 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state WAITING FOR INNER IDENTITY [peap] Identity - testuser4 [peap] Got inner identity 'testuser4' [peap] Setting default EAP type for tunneled EAP session. [peap] Got tunneled request EAP-Message = 0x0294000d016672616e63657363 server { PEAP: Setting User-Name to testuser4 Sending tunneled request EAP-Message = 0x0294000d016672616e63657363 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "testuser4" server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 148 length 13 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for testuser4 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> testuser4 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=testuser4) [ldap] expand: DC=host,DC=in,DC=a,DC=domain,DC=net -> DC=host,DC=in,DC=a,DC=domain,DC=net [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in DC=host,DC=in,DC=a,DC=domain,DC=net, with filter (uid=testuser4) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SASL}testuser4@SPOTIFY.NET" [ldap] looking for reply items in directory... [ldap] user testuser4 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found unknown header {{SASL}}: Not doing anything [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] EAP Identity [eap] processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge ++[eap] returns handled } # server inner-tunnel [peap] Got tunneled reply code 11 EAP-Message = 0x019500221a0195001d10c0bdfc0144d79a88c5213c546a9236ef6672616e63657363 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x69fe7606696b6c295226f098739615c2 [peap] Got tunneled reply RADIUS code 11 EAP-Message = 0x019500221a0195001d10c0bdfc0144d79a88c5213c546a9236ef6672616e63657363 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x69fe7606696b6c295226f098739615c2 [peap] Got tunneled Access-Challenge ++[eap] returns handled Sending Access-Challenge of id 30 to 194.236.60.6 port 1438 EAP-Message = 0x0195004b190017030100408b0708d439e500424334ff22e1d99fc72c03cf545e7da4d98e32b7717d8fdd01549051a25f1cbcb12acf0b2dd2cc1af0fd2ab8d3ce69214c4049145dbe89cb44 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c97337245c6a1a4c8d5d9438e5c8c8 Finished request 5. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=31, length=329 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c97337245c6a1a4c8d5d9438e5c8c8 EAP-Message = 0x0295006b1900170301006097d8cdcd8a34cf3194a9fda7e3f39151d5b26ac29afaa5f077339820e6994962f0b14366db12b799dc419cc60ec47d13238ce2837abf6990e036dbbd66f322062bf87b3607cf70a916944e77f769b8098ed23210300c9ff5e711a60d271bf4f8 Message-Authenticator = 0x9a72d15df4f23c4691c9359f405c2176 # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 149 length 107 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state phase2 [peap] EAP type mschapv2 [peap] Got tunneled request EAP-Message = 0x029500431a0295003e31e585188413185f32ca1a4e41c24add86000000000000000012a75f668e30a221718c00e5c7b321033f96ff40bf5b688e006672616e63657363 server { PEAP: Setting User-Name to testuser4 Sending tunneled request EAP-Message = 0x029500431a0295003e31e585188413185f32ca1a4e41c24add86000000000000000012a75f668e30a221718c00e5c7b321033f96ff40bf5b688e006672616e63657363 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "testuser4" State = 0x69fe7606696b6c295226f098739615c2 server inner-tunnel { # Executing section authorize from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authorize {...} ++[chap] returns noop ++[mschap] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop ++[control] returns noop [eap] EAP packet type response id 149 length 67 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[files] returns noop [ldap] performing user authorization for testuser4 [ldap] expand: %{Stripped-User-Name} -> [ldap] ... expanding second conditional [ldap] expand: %{User-Name} -> testuser4 [ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) -> (uid=testuser4) [ldap] expand: DC=host,DC=in,DC=a,DC=domain,DC=net -> DC=host,DC=in,DC=a,DC=domain,DC=net [ldap] ldap_get_conn: Checking Id: 0 [ldap] ldap_get_conn: Got Id: 0 [ldap] performing search in DC=host,DC=in,DC=a,DC=domain,DC=net, with filter (uid=testuser4) [ldap] No default NMAS login sequence [ldap] looking for check items in directory... [ldap] userPassword -> Password-With-Header == "{SASL}testuser4@SPOTIFY.NET" [ldap] looking for reply items in directory... [ldap] user testuser4 authorized to use remote access [ldap] ldap_release_conn: Release Id: 0 ++[ldap] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] Found unknown header {{SASL}}: Not doing anything [pap] WARNING: Auth-Type already set. Not setting to PAP ++[pap] returns noop Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: testuser4 [mschap] Told to do MS-CHAPv2 for testuser4 with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject [eap] Freeing handler ++[eap] returns reject Failed to authenticate the user. } # server inner-tunnel [peap] Got tunneled reply code 3 MS-CHAP-Error = "\225E=691 R=1" EAP-Message = 0x04950004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\225E=691 R=1" EAP-Message = 0x04950004 Message-Authenticator = 0x00000000000000000000000000000000 [peap] Tunneled authentication was rejected. [peap] FAILURE ++[eap] returns handled Sending Access-Challenge of id 31 to 194.236.60.6 port 1438 EAP-Message = 0x0196002b19001703010020d212e9083be574e3b8fd376ca128702a1f3fa8c3788742fdc1af6659b4ee82aa Message-Authenticator = 0x00000000000000000000000000000000 State = 0x21c97337275f6a1a4c8d5d9438e5c8c8 Finished request 6. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 194.236.60.6 port 1438, id=32, length=265 Framed-MTU = 1480 NAS-IP-Address = 194.236.60.6 NAS-Identifier = "access-se1-302-001" User-Name = "testuser4" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 20 NAS-Port-Type = Ethernet NAS-Port-Id = "A20" Called-Station-Id = "00-1f-28-0c-49-00" Calling-Station-Id = "c8-bc-c8-9b-4b-d8" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "60" State = 0x21c97337275f6a1a4c8d5d9438e5c8c8 EAP-Message = 0x0296002b190017030100208bc4203b2a2402fbc5000f71853972a02334860f1a6f9830ba495f782507f7fd Message-Authenticator = 0xb54c11beffff4ff0e3210d345b00417d # Executing section authorize from file /etc/freeradius/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "testuser4", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 150 length 43 [eap] Continuing tunnel setup. ++[eap] returns ok Found Auth-Type = EAP # Executing group from file /etc/freeradius/sites-enabled/default +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/peap [eap] processing type peap [peap] processing EAP-TLS [peap] eaptls_verify returned 7 [peap] Done initial handshake [peap] eaptls_process returned 7 [peap] EAPTLS_OK [peap] Session established. Decoding tunneled attributes. [peap] Peap state send tlv failure [peap] Received EAP-TLV response. [peap] The users session was previously rejected: returning reject (again.) [peap] *** This means you need to read the PREVIOUS messages in the debug output [peap] *** to find out the reason why the user was rejected. [peap] *** Look for "reject" or "fail". Those earlier messages will tell you. [peap] *** what went wrong, and how to fix the problem. [eap] Handler failed in EAP/peap [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /etc/freeradius/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> testuser4 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 7 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 7 Sending Access-Reject of id 32 to 194.236.60.6 port 1438 EAP-Message = 0x04960004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 0 ID 25 with timestamp +2 Cleaning up request 1 ID 26 with timestamp +2 Cleaning up request 2 ID 27 with timestamp +2 Cleaning up request 3 ID 28 with timestamp +2 Cleaning up request 4 ID 29 with timestamp +2 Cleaning up request 5 ID 30 with timestamp +2 Cleaning up request 6 ID 31 with timestamp +2 Waking up in 1.0 seconds. Cleaning up request 7 ID 32 with timestamp +2 Ready to process requests. ----->8------ Notice the lines: [eap] Request found, released from the list [eap] EAP/mschapv2 [eap] processing type mschapv2 [mschapv2] # Executing group from file /etc/freeradius/sites-enabled/inner-tunnel [mschapv2] +- entering group MS-CHAP {...} [mschap] No Cleartext-Password configured. Cannot create LM-Password. [mschap] No Cleartext-Password configured. Cannot create NT-Password. [mschap] Creating challenge hash with username: testuser4 [mschap] Told to do MS-CHAPv2 for testuser4 with NT-Password [mschap] FAILED: No NT/LM-Password. Cannot perform authentication. [mschap] FAILED: MS-CHAP2-Response is incorrect ++[mschap] returns reject I wonder what is this module doing. Please, could you give us some advice? Kind regards, Francesc