I know this is an old thread, but I am attempting to configure the same scenario in Freeradius. The backend database is Azure AD DS with LDAPS enabled, and the goal is to have EAP-TTLS/PAP for wifi access points. Obviously passwords are not in cleartext so users should be authenticated by a simple LDAP bind by the rlm_ldap module. I added Alan’s if statement to default and inner-tunnel to force Auth-Type LDAP but am still getting the error No Auth-Type Found. It doesn’t look like the given credentials are tested with an LDAP bind. Any specific config or documentation to investigate would be appreciated See the below log of a request from wifi client. FreeRADIUS Version 3.0.19 Copyright (C) 1999-2019 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/share/freeradius/dictionary including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/share/freeradius/dictionary.dhcp including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/share/freeradius/dictionary.vqp including dictionary file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/dictionary including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/radiusd.conf including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/proxy.conf including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/clients.conf including files in directory /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/cache_eap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/chap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/date including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/digest including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/dynamic_clients including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/eap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/echo including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/exec including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expiration including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expr including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/files including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ldap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/logintime including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/mschap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ntlm_auth including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/pap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/passwd including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/preprocess including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/radutmp including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/replicate including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/soh including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/sradutmp including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unix including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unpack including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/utf8 including files in directory /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/ including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/abfab-tr including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/accounting including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/canonicalization including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/control including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/cui including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/debug including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/dhcp including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/eap including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/filter including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/moonshot-targeted-ids including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/operator-name including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/policy.d/rfc7542 including files in directory /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/ including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default including configuration file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel main { name = "radiusd" prefix = "/usr/local/Cellar/freeradius-server/3.0.19" localstatedir = "/usr/local/var" sbindir = "/usr/local/Cellar/freeradius-server/3.0.19/bin" logdir = "/usr/local/var/log/radius" run_dir = "/usr/local/var/run/radiusd" libdir = "/usr/local/Cellar/freeradius-server/3.0.19/lib" radacctdir = "/usr/local/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/usr/local/var/run/radiusd/radiusd.pid" checkrad = "/usr/local/Cellar/freeradius-server/3.0.19/bin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes allow_vulnerable_openssl = "no" } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client dynamic { ipaddr = 10.11.0.0/16 require_message_authenticator = no secret = <<< secret >>> proto = "*" limit { max_connections = 0 lifetime = 0 idle_timeout = 30 } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = ldap # Creating Auth-Type = mschap # Creating Auth-Type = digest # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP radiusd: #### Instantiating modules #### modules { # Loaded module rlm_always # Loading module "reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_chap # Loading module "chap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/chap # Loaded module rlm_date # Loading module "date" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/date date { format = "%b %e %Y %H:%M:%S %Z" utc = no } # Loading module "wispr2date" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/date date wispr2date { format = "%Y-%m-%dT%H:%M:%S" utc = no } # Loaded module rlm_detail # Loading module "detail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail detail { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "auth_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail reply_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_digest # Loading module "digest" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/digest # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_eap # Loading module "eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_exec # Loading module "echo" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loading module "exec" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_expiration # Loading module "expiration" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expiration # Loaded module rlm_expr # Loading module "expr" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ" } # Loaded module rlm_files # Loading module "files" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/files files { filename = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/authorize" acctusersfile = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_ldap # Loading module "ldap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ldap ldap { server = "ldaps.domain.ca" port = 636 identity = "ldaps@domain.ca" password = <<< secret >>> sasl { } user_dn = "LDAP-UserDn" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=posixGroup)" scope = "sub" name_attribute = "cn" membership_attribute = "memberOf" cacheable_name = no cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "OU=AADDC Users,DC=domain,DC=ca" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_linelog # Loading module "linelog" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog linelog { filename = "/usr/local/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/usr/local/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_logintime # Loading module "logintime" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_mschap # Loading module "mschap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no use_open_directory = yes } # Loading module "ntlm_auth" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_pap # Loading module "pap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/pap pap { normalise = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_preprocess # Loading module "preprocess" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/preprocess preprocess { huntgroups = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/huntgroups" hints = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_radutmp # Loading module "radutmp" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/radutmp radutmp { filename = "/usr/local/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_realm # Loading module "IPASS" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "bangpath" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm bangpath { format = "prefix" delimiter = "!" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_replicate # Loading module "replicate" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/replicate # Loaded module rlm_soh # Loading module "soh" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loading module "sradutmp" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/usr/local/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_unix # Loading module "unix" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unix unix { radwtmp = "/usr/local/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_unpack # Loading module "unpack" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/unpack # Loaded module rlm_utf8 # Loading module "utf8" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/utf8 instantiate { } # Instantiating module "reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "fail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "ok" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "handled" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "noop" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "updated" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/always # Instantiating module "attr_filter.post-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_reject # Instantiating module "attr_filter.access_challenge" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/attr_filter reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/attr_filter/accounting_response # Instantiating module "cache_eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "detail" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail # Instantiating module "auth_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/detail.log # Instantiating module "eap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs" pem_file_type = yes private_key_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/server.pem" certificate_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/server.pem" ca_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/files reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/authorize reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/accounting reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/files/pre-proxy # Instantiating module "ldap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20428 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "linelog" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog # Instantiating module "log_accounting" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/linelog # Instantiating module "logintime" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/logintime # Instantiating module "mschap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "pap" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/pap # Instantiating module "etc_passwd" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "preprocess" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/preprocess reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-config/preprocess/hints # Instantiating module "IPASS" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "bangpath" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/mods-enabled/realm } # modules radiusd: #### Loading Virtual Servers #### server { # from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/radiusd.conf } # server server default { # from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel:341 } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 10.11.12.62 port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address 10.11.12.62 port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 63972 Listening on proxy address :: port 63973 Ready to process requests (0) Received Access-Request Id 55 from 10.11.12.207:59118 to 10.11.12.62:1812 length 191 (0) User-Name = "ldaps@domain.ca" (0) NAS-IP-Address = 10.11.12.207 (0) NAS-Port = 736 (0) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (0) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (0) EAP-Message = 0x0200001c016c64617073406b696e677363687269737469616e2e6361 (0) Message-Authenticator = 0x5fc7a5fa4f247c8d85cda267b269d910 (0) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (0) suffix: No such realm "domain.ca" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 28 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0x82acad7c82ada94f (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 55 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (0) EAP-Message = 0x010100160410323dc8ee4193e3228d24f6b415a22dd0 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x82acad7c82ada94f1bfb0011896e6929 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 56 from 10.11.12.207:59118 to 10.11.12.62:1812 length 189 (1) User-Name = "ldaps@domain.ca" (1) NAS-IP-Address = 10.11.12.207 (1) NAS-Port = 736 (1) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (1) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (1) EAP-Message = 0x020100080319152b (1) State = 0x82acad7c82ada94f1bfb0011896e6929 (1) Message-Authenticator = 0xfa1fa3aebbe14b2929e9aff5fc492fea (1) session-state: No cached attributes (1) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (1) suffix: No such realm "domain.ca" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 8 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (userPrincipalName=ldaps@domain.ca) (1) ldap: Performing search in "OU=AADDC Users,DC=domain,DC=ca" with filter "(userPrincipalName=ldaps@domain.ca)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "CN=LDAPS,OU=AADDC Users,DC=domain,DC=ca" (1) ldap: Processing user attributes (1) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (1) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://ldaps.domain.ca:636 TLS: during handshake: peer cert is valid, or was ignored if verification disabled (-9841) TLS: during handshake: Peer certificate is trusted TLS: TLSv1.2 session established using 256-bit TLS_RSA_WITH_AES_256_GCM_SHA384 cipher rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = ok (1) [expiration] = noop (1) [logintime] = noop Not doing PAP as Auth-Type is already set. (1) [pap] = noop (1) if (noop && User-Password) { (1) if (noop && User-Password) -> FALSE (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x82acad7c82ada94f (1) eap: Finished EAP session with state 0x82acad7c82ada94f (1) eap: Previous EAP request found for state 0x82acad7c82ada94f, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Initiating new TLS session (1) eap_peap: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0x82acad7c83aeb44f (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 56 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (1) EAP-Message = 0x010200061920 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x82acad7c83aeb44f1bfb0011896e6929 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 57 from 10.11.12.207:59118 to 10.11.12.62:1812 length 342 (2) User-Name = "ldaps@domain.ca" (2) NAS-IP-Address = 10.11.12.207 (2) NAS-Port = 736 (2) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (2) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (2) EAP-Message = 0x020200a119800000009716030100920100008e03035d3752bc4dd01f70ca7820c44591b0838514535fffba5a0e22a3ad100cc0e73400002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000 (2) State = 0x82acad7c83aeb44f1bfb0011896e6929 (2) Message-Authenticator = 0xd96f97654989472c63ccdc9127008329 (2) session-state: No cached attributes (2) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (2) suffix: No such realm "domain.ca" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 2 length 161 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x82acad7c83aeb44f (2) eap: Finished EAP session with state 0x82acad7c83aeb44f (2) eap: Previous EAP request found for state 0x82acad7c83aeb44f, released from the list (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer indicated complete TLS record size will be 151 bytes (2) eap_peap: Got complete TLS record (151 bytes) (2) eap_peap: [eaptls verify] = length included (2) eap_peap: (other): before/accept initialization (2) eap_peap: TLS_accept: before/accept initialization (2) eap_peap: <<< recv TLS 1.2 [length 0092] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 0039] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 08d3] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 014d] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: >>> send TLS 1.2 [length 0004] (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: TLS_accept: Need to read more data: unknown state (2) eap_peap: TLS - In Handshake Phase (2) eap_peap: TLS - got 2673 bytes of data (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 3 length 1004 (2) eap: EAP session adding &reply:State = 0x82acad7c80afb44f (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 57 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (2) EAP-Message = 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 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x82acad7c80afb44f1bfb0011896e6929 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 58 from 10.11.12.207:59118 to 10.11.12.62:1812 length 187 (3) User-Name = "ldaps@domain.ca" (3) NAS-IP-Address = 10.11.12.207 (3) NAS-Port = 736 (3) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (3) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (3) EAP-Message = 0x020300061900 (3) State = 0x82acad7c80afb44f1bfb0011896e6929 (3) Message-Authenticator = 0xe79738b873d0b96b0e6dd1bc3c3fa9e2 (3) session-state: No cached attributes (3) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (3) suffix: No such realm "domain.ca" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 3 length 6 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x82acad7c80afb44f (3) eap: Finished EAP session with state 0x82acad7c80afb44f (3) eap: Previous EAP request found for state 0x82acad7c80afb44f, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer ACKed our handshake fragment (3) eap_peap: [eaptls verify] = request (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 4 length 1000 (3) eap: EAP session adding &reply:State = 0x82acad7c81a8b44f (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 58 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (3) EAP-Message = 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 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x82acad7c81a8b44f1bfb0011896e6929 (3) Finished request Waking up in 4.7 seconds. (4) Received Access-Request Id 59 from 10.11.12.207:59118 to 10.11.12.62:1812 length 187 (4) User-Name = "ldaps@domain.ca" (4) NAS-IP-Address = 10.11.12.207 (4) NAS-Port = 736 (4) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (4) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (4) EAP-Message = 0x020400061900 (4) State = 0x82acad7c81a8b44f1bfb0011896e6929 (4) Message-Authenticator = 0xb084d992c649b97a05c97fdfb2f62a20 (4) session-state: No cached attributes (4) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (4) suffix: No such realm "domain.ca" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 4 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x82acad7c81a8b44f (4) eap: Finished EAP session with state 0x82acad7c81a8b44f (4) eap: Previous EAP request found for state 0x82acad7c81a8b44f, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 5 length 691 (4) eap: EAP session adding &reply:State = 0x82acad7c86a9b44f (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 59 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (4) EAP-Message = 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 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x82acad7c86a9b44f1bfb0011896e6929 (4) Finished request Waking up in 4.7 seconds. (5) Received Access-Request Id 60 from 10.11.12.207:59118 to 10.11.12.62:1812 length 317 (5) User-Name = "ldaps@domain.ca" (5) NAS-IP-Address = 10.11.12.207 (5) NAS-Port = 736 (5) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (5) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (5) EAP-Message = 0x0205008819800000007e16030300461000004241044e2a5405204c749624ab5743557771b8894447e81ab936ac1105631fdcaba7312ab78292caaa799084eb74031555a236f5b538768cfe422432a179f8b0e4e0161403030001011603030028e55213cc96d61f81d907a32a1ce9327ae5a6d68702b6e3af3fd834369983c644795ada796dc5738f (5) State = 0x82acad7c86a9b44f1bfb0011896e6929 (5) Message-Authenticator = 0xd83517b1c089a67af74981323141225b (5) session-state: No cached attributes (5) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (5) suffix: No such realm "domain.ca" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 5 length 136 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x82acad7c86a9b44f (5) eap: Finished EAP session with state 0x82acad7c86a9b44f (5) eap: Previous EAP request found for state 0x82acad7c86a9b44f, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer indicated complete TLS record size will be 126 bytes (5) eap_peap: Got complete TLS record (126 bytes) (5) eap_peap: [eaptls verify] = length included (5) eap_peap: <<< recv TLS 1.2 [length 0046] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: TLS_accept: unknown state (5) eap_peap: <<< recv TLS 1.2 [length 0001] (5) eap_peap: <<< recv TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: >>> send TLS 1.2 [length 0001] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: >>> send TLS 1.2 [length 0010] (5) eap_peap: TLS_accept: unknown state (5) eap_peap: TLS_accept: unknown state (5) eap_peap: (other): SSL negotiation finished successfully (5) eap_peap: TLS - Connection Established (5) eap_peap: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) eap_peap: TLS-Session-Version = "TLS 1.2" (5) eap_peap: TLS - got 51 bytes of data (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 6 length 57 (5) eap: EAP session adding &reply:State = 0x82acad7c87aab44f (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) session-state: Saving cached attributes (5) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (5) TLS-Session-Version = "TLS 1.2" (5) Sent Access-Challenge Id 60 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (5) EAP-Message = 0x0106003919001403030001011603030028e0cda00b6a448a56ed39cd795dbd504f1b7ed97f26645577169999a2a82878b014797a35667560d6 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x82acad7c87aab44f1bfb0011896e6929 (5) Finished request Waking up in 4.7 seconds. (6) Received Access-Request Id 61 from 10.11.12.207:59118 to 10.11.12.62:1812 length 187 (6) User-Name = "ldaps@domain.ca" (6) NAS-IP-Address = 10.11.12.207 (6) NAS-Port = 736 (6) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (6) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (6) EAP-Message = 0x020600061900 (6) State = 0x82acad7c87aab44f1bfb0011896e6929 (6) Message-Authenticator = 0x640d37eed321b5aa62c0e07e2618caff (6) Restoring &session-state (6) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) &session-state:TLS-Session-Version = "TLS 1.2" (6) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (6) suffix: No such realm "domain.ca" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 6 length 6 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x82acad7c87aab44f (6) eap: Finished EAP session with state 0x82acad7c87aab44f (6) eap: Previous EAP request found for state 0x82acad7c87aab44f, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer ACKed our handshake fragment. handshake is finished (6) eap_peap: [eaptls verify] = success (6) eap_peap: [eaptls process] = success (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state TUNNEL ESTABLISHED (6) eap: Sending EAP Request (code 1) ID 7 length 40 (6) eap: EAP session adding &reply:State = 0x82acad7c84abb44f (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) session-state: Saving cached attributes (6) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (6) TLS-Session-Version = "TLS 1.2" (6) Sent Access-Challenge Id 61 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (6) EAP-Message = 0x010700281900170303001de0cda00b6a448a57f0cba2e144a2103493fda50453cc6de21c896c4b85 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x82acad7c84abb44f1bfb0011896e6929 (6) Finished request Waking up in 4.7 seconds. (7) Received Access-Request Id 62 from 10.11.12.207:59118 to 10.11.12.62:1812 length 240 (7) User-Name = "ldaps@domain.ca" (7) NAS-IP-Address = 10.11.12.207 (7) NAS-Port = 736 (7) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (7) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (7) EAP-Message = 0x0207003b19001703030030e55213cc96d61f8273f8db4f99f175e3fac2195247dae9cca274fb3182542f50a5c4d6d5ac946e82d1bad337d66e8eff (7) State = 0x82acad7c84abb44f1bfb0011896e6929 (7) Message-Authenticator = 0x868a63fa3da822ea71589759443a8a06 (7) Restoring &session-state (7) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) &session-state:TLS-Session-Version = "TLS 1.2" (7) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (7) suffix: No such realm "domain.ca" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 7 length 59 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x82acad7c84abb44f (7) eap: Finished EAP session with state 0x82acad7c84abb44f (7) eap: Previous EAP request found for state 0x82acad7c84abb44f, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state WAITING FOR INNER IDENTITY (7) eap_peap: Identity - ldaps@domain.ca (7) eap_peap: Got inner identity 'ldaps@domain.ca' (7) eap_peap: Setting default EAP type for tunneled EAP session (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x0207001c016c64617073406b696e677363687269737469616e2e6361 (7) eap_peap: Setting User-Name to ldaps@domain.ca (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x0207001c016c64617073406b696e677363687269737469616e2e6361 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "ldaps@domain.ca" (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x0207001c016c64617073406b696e677363687269737469616e2e6361 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "ldaps@domain.ca" (7) WARNING: Outer and inner identities are the same. User privacy is compromised. (7) server inner-tunnel { (7) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (7) suffix: No such realm "domain.ca" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) [files] = noop rlm_ldap (ldap): Reserved connection (1) (7) ldap: EXPAND (userPrincipalName=%{%{Stripped-User-Name}:-%{User-Name}}) (7) ldap: --> (userPrincipalName=ldaps@domain.ca) (7) ldap: Performing search in "OU=AADDC Users,DC=domain,DC=ca" with filter "(userPrincipalName=ldaps@domain.ca)", scope "sub" (7) ldap: Waiting for search result... (7) ldap: User object found at DN "CN=LDAPS,OU=AADDC Users,DC=domain,DC=ca" (7) ldap: Processing user attributes (7) ldap: WARNING: No "known good" password added. Ensure the admin user has permission to read the password attribute (7) ldap: WARNING: PAP authentication will *NOT* work with Active Directory (if that is what you were trying to configure) rlm_ldap (ldap): Released connection (1) (7) [ldap] = ok (7) [expiration] = noop (7) [logintime] = noop (7) [pap] = noop (7) if (noop && User-Password) { (7) if (noop && User-Password) -> FALSE (7) } # authorize = ok (7) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (7) Failed to authenticate the user (7) Using Post-Auth-Type Reject (7) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/inner-tunnel (7) Post-Auth-Type REJECT { (7) attr_filter.access_reject: EXPAND %{User-Name} (7) attr_filter.access_reject: --> ldaps@domain.ca (7) attr_filter.access_reject: Matched entry DEFAULT at line 11 (7) [attr_filter.access_reject] = updated (7) update outer.session-state { (7) &Module-Failure-Message := &request:Module-Failure-Message -> 'No Auth-Type found: rejecting the user via Post-Auth-Type = Reject' (7) } # update outer.session-state = noop (7) } # Post-Auth-Type REJECT = updated (7) } # server inner-tunnel (7) Virtual server sending reply (7) eap_peap: Got tunneled reply code 3 (7) eap_peap: Got tunneled reply RADIUS code 3 (7) eap_peap: Tunneled authentication was rejected (7) eap_peap: FAILURE (7) eap: Sending EAP Request (code 1) ID 8 length 46 (7) eap: EAP session adding &reply:State = 0x82acad7c85a4b44f (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) session-state: Saving cached attributes (7) TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (7) TLS-Session-Version = "TLS 1.2" (7) Module-Failure-Message := "No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" (7) Sent Access-Challenge Id 62 from 10.11.12.62:1812 to 10.11.12.207:59118 length 0 (7) EAP-Message = 0x0108002e19001703030023e0cda00b6a448a58373ab699fedf00aa2c781b582a7df63ce8e090a5ad3c7a71069e29 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x82acad7c85a4b44f1bfb0011896e6929 (7) Finished request Waking up in 4.7 seconds. (8) Received Access-Request Id 63 from 10.11.12.207:59118 to 10.11.12.62:1812 length 227 (8) User-Name = "ldaps@domain.ca" (8) NAS-IP-Address = 10.11.12.207 (8) NAS-Port = 736 (8) Called-Station-Id = "50-60-28-5A-23-F7:RADIUS" (8) Calling-Station-Id = "5C-F7-E6-30-B3-2E" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a" (8) EAP-Message = 0x0208002e19001703030023e55213cc96d61f8324ff2b4fdca0a00061bbed2c04d869f30da768cd9b19b1ecc9e6a7 (8) State = 0x82acad7c85a4b44f1bfb0011896e6929 (8) Message-Authenticator = 0x1e760f2cdb7366845fa2ce36101be0ed (8) Restoring &session-state (8) &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384" (8) &session-state:TLS-Session-Version = "TLS 1.2" (8) &session-state:Module-Failure-Message := "No Auth-Type found: rejecting the user via Post-Auth-Type = Reject" (8) # Executing section authorize from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: Looking up realm "domain.ca" for User-Name = "ldaps@domain.ca" (8) suffix: No such realm "domain.ca" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 8 length 46 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x82acad7c85a4b44f (8) eap: Finished EAP session with state 0x82acad7c85a4b44f (8) eap: Previous EAP request found for state 0x82acad7c85a4b44f, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv failure (8) eap_peap: Received EAP-TLV response (8) eap_peap: ERROR: The users session was previously rejected: returning reject (again.) (8) eap_peap: This means you need to read the PREVIOUS messages in the debug output (8) eap_peap: to find out the reason why the user was rejected (8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you (8) eap_peap: what went wrong, and how to fix the problem (8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed (8) eap: Sending EAP Failure (code 4) ID 8 length 4 (8) eap: Failed in EAP select (8) [eap] = invalid (8) } # authenticate = invalid (8) Failed to authenticate the user (8) Using Post-Auth-Type Reject (8) # Executing group from file /usr/local/Cellar/freeradius-server/3.0.19/etc/raddb/sites-enabled/default (8) Post-Auth-Type REJECT { (8) attr_filter.access_reject: EXPAND %{User-Name} (8) attr_filter.access_reject: --> ldaps@domain.ca (8) attr_filter.access_reject: Matched entry DEFAULT at line 11 (8) [attr_filter.access_reject] = updated (8) [eap] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # Post-Auth-Type REJECT = updated (8) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (8) Sending delayed response (8) Sent Access-Reject Id 63 from 10.11.12.62:1812 to 10.11.12.207:59118 length 44 (8) EAP-Message = 0x04080004 (8) Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.7 seconds. (0) Cleaning up request packet ID 55 with timestamp +16 (1) Cleaning up request packet ID 56 with timestamp +16 (2) Cleaning up request packet ID 57 with timestamp +16 (3) Cleaning up request packet ID 58 with timestamp +16 (4) Cleaning up request packet ID 59 with timestamp +16 (5) Cleaning up request packet ID 60 with timestamp +16 (6) Cleaning up request packet ID 61 with timestamp +16 (7) Cleaning up request packet ID 62 with timestamp +16 (8) Cleaning up request packet ID 63 with timestamp +16 Ready to process requests