G'day All, Using Debian etch. I've started again with the WPA HOWTO at http://wiki.freeradius.org/WPA_HOWTO It's a bit confusing with the eap.conf file separate to the radiusd.conf but I thought I had got it right. I was wrong. :/# freeradius -X -A Starting - reading configuration files ... <snip> rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open shared object file: No such file or directory radiusd.conf[10]: eap: Module instantiation failed. radiusd.conf[1940] Unknown module "eap". radiusd.conf[1887] Failed to parse authenticate section. cheval:/# find -name rlm_eap_tls.so cheval:/# Can anyone give me a hint before my PC goes through a closed window? Thanking you in anticipation, build
Hi, I don't recommend you to use Debian Freeradius Package. It has been built without eap support. You have to rebuild from source. Here is a good link here : http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-... Regards. ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: build <buildy@gmail.com> To: "FreeRADIUS LIST" <freeradius-users@lists.freeradius.org> Date: Wed, 21 Nov 2007 17:22:58 +1100 Subject: WPA HOWTO
G'day All, Using Debian etch. I've started again with the WPA HOWTO at http://wiki.freeradius.org/WPA_HOWTO
It's a bit confusing with the eap.conf file separate to the radiusd.conf but I thought I had got it right. I was wrong.
:/# freeradius -X -A Starting - reading configuration files ... <snip> rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open shared object file: No such file or directory radiusd.conf[10]: eap: Module instantiation failed. radiusd.conf[1940] Unknown module "eap". radiusd.conf[1887] Failed to parse authenticate section. cheval:/# find -name rlm_eap_tls.so cheval:/#
Can anyone give me a hint before my PC goes through a closed window? Thanking you in anticipation, build - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
G'day Oliver, Thank you for that, no wonder :-( However the build looks scary so I: :/# patch -pl < freeradius-openssl.patch patch: **** strip count l is not a number :/# Is this easily fixed? Thanks in anticipation, build On 21/11/2007, OLIVER Patrice <patrice.oliver@ch-beaune.fr> wrote: > Hi, > > I don't recommend you to use Debian Freeradius Package. It has been built without eap support. > You have to rebuild from source. > > Here is a good link here : > http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html > > Regards. > > ---------------------------------------- > Patrice OLIVER > Chef du Projet Ville Hôpital > Responsable Réseaux & Sécurité > ---------------------------------------- > HOSPICES CIVILS DE BEAUNE > Service Informatique > BP 104 > 21203 BEAUNE CEDEX > > Tél. 33 3 80 24 44 09 > Fax 33 3 80 24 45 90 > ---------------------------------------- > > > -----Original Message----- > From: build <buildy@gmail.com> > To: "FreeRADIUS LIST" <freeradius-users@lists.freeradius.org> > Date: Wed, 21 Nov 2007 17:22:58 +1100 > Subject: WPA HOWTO > > > G'day All, > > Using Debian etch. I've started again with the WPA HOWTO at > > http://wiki.freeradius.org/WPA_HOWTO > > > > It's a bit confusing with the eap.conf file separate to the > > radiusd.conf but I thought I had got it right. I was wrong. > > > > :/# freeradius -X -A > > Starting - reading configuration files ... > > <snip> > > rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open > > shared object file: No such file or directory > > radiusd.conf[10]: eap: Module instantiation failed. > > radiusd.conf[1940] Unknown module "eap". > > radiusd.conf[1887] Failed to parse authenticate section. > > cheval:/# find -name rlm_eap_tls.so > > cheval:/# > > > > > > Can anyone give me a hint before my PC goes through a closed window? > > Thanking you in anticipation, > > build > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >
Did you go to freeradius-1.1.7 directory ? Cordialement, ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: build <buildy@gmail.com> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Date: Wed, 21 Nov 2007 18:10:22 +1100 Subject: Re: WPA HOWTO > G'day Oliver, > Thank you for that, no wonder :-( > However the build looks scary so I: > :/# patch -pl < freeradius-openssl.patch > patch: **** strip count l is not a number > :/# > > Is this easily fixed? > > Thanks in anticipation, > build > > > On 21/11/2007, OLIVER Patrice <patrice.oliver@ch-beaune.fr> wrote: > > Hi, > > > > I don't recommend you to use Debian Freeradius Package. It has been built without eap support. > > You have to rebuild from source. > > > > Here is a good link here : > > http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html > > > > Regards. > > > > ---------------------------------------- > > Patrice OLIVER > > Chef du Projet Ville Hôpital > > Responsable Réseaux & Sécurité > > ---------------------------------------- > > HOSPICES CIVILS DE BEAUNE > > Service Informatique > > BP 104 > > 21203 BEAUNE CEDEX > > > > Tél. 33 3 80 24 44 09 > > Fax 33 3 80 24 45 90 > > ---------------------------------------- > > > > > > -----Original Message----- > > From: build <buildy@gmail.com> > > To: "FreeRADIUS LIST" <freeradius-users@lists.freeradius.org> > > Date: Wed, 21 Nov 2007 17:22:58 +1100 > > Subject: WPA HOWTO > > > > > G'day All, > > > Using Debian etch. I've started again with the WPA HOWTO at > > > http://wiki.freeradius.org/WPA_HOWTO > > > > > > It's a bit confusing with the eap.conf file separate to the > > > radiusd.conf but I thought I had got it right. I was wrong. > > > > > > :/# freeradius -X -A > > > Starting - reading configuration files ... > > > <snip> > > > rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open > > > shared object file: No such file or directory > > > radiusd.conf[10]: eap: Module instantiation failed. > > > radiusd.conf[1940] Unknown module "eap". > > > radiusd.conf[1887] Failed to parse authenticate section. > > > cheval:/# find -name rlm_eap_tls.so > > > cheval:/# > > > > > > > > > Can anyone give me a hint before my PC goes through a closed window? > > > Thanking you in anticipation, > > > build > > > - > > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users..html > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
If it don't work, you have to do the changes manually. I did it, it's not a long job to do. Cordialement, ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: build <buildy@gmail.com> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Date: Wed, 21 Nov 2007 18:10:22 +1100 Subject: Re: WPA HOWTO > G'day Oliver, > Thank you for that, no wonder :-( > However the build looks scary so I: > :/# patch -pl < freeradius-openssl.patch > patch: **** strip count l is not a number > :/# > > Is this easily fixed? > > Thanks in anticipation, > build > > > On 21/11/2007, OLIVER Patrice <patrice.oliver@ch-beaune.fr> wrote: > > Hi, > > > > I don't recommend you to use Debian Freeradius Package. It has been built without eap support. > > You have to rebuild from source. > > > > Here is a good link here : > > http://www.linuxinsight.com/building-debian-freeradius-package-with-eap-tls-ttls-peap-support.html > > > > Regards. > > > > ---------------------------------------- > > Patrice OLIVER > > Chef du Projet Ville Hôpital > > Responsable Réseaux & Sécurité > > ---------------------------------------- > > HOSPICES CIVILS DE BEAUNE > > Service Informatique > > BP 104 > > 21203 BEAUNE CEDEX > > > > Tél. 33 3 80 24 44 09 > > Fax 33 3 80 24 45 90 > > ---------------------------------------- > > > > > > -----Original Message----- > > From: build <buildy@gmail.com> > > To: "FreeRADIUS LIST" <freeradius-users@lists.freeradius.org> > > Date: Wed, 21 Nov 2007 17:22:58 +1100 > > Subject: WPA HOWTO > > > > > G'day All, > > > Using Debian etch. I've started again with the WPA HOWTO at > > > http://wiki.freeradius.org/WPA_HOWTO > > > > > > It's a bit confusing with the eap.conf file separate to the > > > radiusd.conf but I thought I had got it right. I was wrong. > > > > > > :/# freeradius -X -A > > > Starting - reading configuration files ... > > > <snip> > > > rlm_eap: Failed to link EAP-Type/tls: rlm_eap_tls.so: cannot open > > > shared object file: No such file or directory > > > radiusd.conf[10]: eap: Module instantiation failed. > > > radiusd.conf[1940] Unknown module "eap". > > > radiusd.conf[1887] Failed to parse authenticate section. > > > cheval:/# find -name rlm_eap_tls.so > > > cheval:/# > > > > > > > > > Can anyone give me a hint before my PC goes through a closed window? > > > Thanking you in anticipation, > > > build > > > - > > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users..html > > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 21/11/2007, Alan DeKok <aland@deployingradius.com> wrote:
build wrote:
G'day Oliver, Thank you for that, no wonder :-( However the build looks scary so I: :/# patch -pl < freeradius-openssl.patch patch: **** strip count l is not a number :/#
Is this easily fixed?
It's "-p1", not "-pl". As in "one".
Alan DeKok.
Thank you both your patience is appreciated. The build failed? user1@box1:/TEMP/freeradius-1.1.7$ dpkg-buildpackage -rfakeroot dpkg-buildpackage: source package is freeradius dpkg-buildpackage: source version is 1.1.7-1 dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org> sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) dpkg-buildpackage: host architecture i386 dpkg-buildpackage: source version without epoch 1.1.7-1 sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev libssl-dev dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. dpkg-buildpackage: (Use -d flag to override.) user1@box1:/TEMP/freeradius-1.1.7$ and I have no bloody idea what to do. or have I tested your patience to it's limit? Thanks in anticipation, build
build wrote:
Thank you both your patience is appreciated. The build failed? .. sh: gcc: command not found
You do need a compiler to compile things.
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev libssl-dev
So... install those packages?
and I have no bloody idea what to do.
Read the Debian documentation for how to build packages, and what you need. Alan DeKok.
Do this 1) Be root. 2) create de directory (freeradius for example) mkdir freeradius cd freeradius 3) Follow these instructions : apt-get update apt-get build-dep freeradius apt-get source freeradius apt-get install libssl-dev fakeroot apt-get source freeradius cd freeradius-1.1.x/debian/ (1.1.x is the version) Edit de control file modify these two lines : Build-Depends: debhelper (>= 5), libltdl3-dev, libpam0g-dev, libmysqlclient15-dev | libmysqlclient-dev, libgdbm-dev, libldap2-dev, libsasl2-dev, libiodbc2-dev, libkrb5-dev, snmp, autotools-dev, dpatch (>= 2), libperl-dev, libtool, dpkg-dev (>= 1.13.19), libssl-dev Build-Conflicts: removing what is after 'Build-Conflics' Add this at the end of the file : Package: freeradius-eaptls Architecture: any Depends: freeradius (= ${binary:Version}), ${shlibs:Depends} Description: eap-tls module for FreeRADIUS server Debian will not provide a binary version of the rlm_eap_tls.so library. This module is required if you want to use EAP/TLS authentication, commonly used for WiFi access points Package: freeradius-eappeap Architecture: any Depends: freeradius (= ${binary:Version}), ${shlibs:Depends} Description: eap-peap module for FreeRADIUS server Debian will not provide a binary version of the rlm_eap_peap.so library. This module is required if you want to use EAP/PEAP authentication, commonly used for WiFi access points Save the control file Edit de rules file Modify it to get something like this : buildssl=--without-rlm_otp --without-rlm_sql_postgresql --without-snmp modulelist=krb5 ldap sql_mysql sql_iodbc eap_peap eap_tls Save it Create a file named freeradius-eaptls.install, containing : usr/lib/freeradius/rlm_eap_tls*.so Create a file named freeradius-eaptls.postinst, containing : #! /bin/sh set -e case "$1" in configure) if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then invoke-rc.d freeradius restart else /etc/init.d/freeradius restart fi ;; abort-upgrade) ;; abort-remove) ;; abort-deconfigure) ;; esac #DEBHELPER# Create a file named freeradius-eappeap.install, containing : usr/lib/freeradius/rlm_eap_peap*.so Create a file named freeradios-eappeap.postinst, containing : #! /bin/sh set -e case "$1" in configure) if [ -x "`which invoke-rc.d 2>/dev/null`" ]; then invoke-rc.d freeradius reload else /etc/init.d/freeradius reload fi ;; abort-upgrade) ;; abort-remove) ;; abort-deconfigure) ;; esac #DEBHELPER# cd .. (so you are si freeradius/freeradius-1.1.x directory) dpkg-buildpackage -r -uc -us After a few minutes, you will get your new packages in freeradius directory. After, you just have to protect your installation from upgrades. See google for that, I don't have the documentation here. Cordialement, ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: Alan DeKok <aland@deployingradius.com> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Date: Wed, 21 Nov 2007 11:35:13 +0100 Subject: Re: WPA HOWTO
build wrote:
Thank you both your patience is appreciated. The build failed? ... sh: gcc: command not found
You do need a compiler to compile things.
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev libssl-dev
So... install those packages?
and I have no bloody idea what to do.
Read the Debian documentation for how to build packages, and what you need.
Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On 21/11/2007, OLIVER Patrice <patrice.oliver@ch-beaune.fr> wrote:
Do this
<BIG SNIP> I've printed that out, there's quite a bit. I looked at the rules file but do not see where this goes??? <quote> Modify it to get something like this : buildssl=--without-rlm_otp --without-rlm_sql_postgresql --without-snmp modulelist=krb5 ldap sql_mysql sql_iodbc eap_peap eap_tls </quote> It's after midnight so better after some sleep I think. Will let you know how i go with it tomorrow night. THANK YOU VERY MUCH! Warm regards, build
Is gcc installed ? Cordialement, ---------------------------------------- Patrice OLIVER Chef du Projet Ville Hôpital Responsable Réseaux & Sécurité ---------------------------------------- HOSPICES CIVILS DE BEAUNE Service Informatique BP 104 21203 BEAUNE CEDEX Tél. 33 3 80 24 44 09 Fax 33 3 80 24 45 90 ---------------------------------------- -----Original Message----- From: build <buildy@gmail.com> To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> Date: Wed, 21 Nov 2007 21:06:43 +1100 Subject: Re: WPA HOWTO
On 21/11/2007, Alan DeKok <aland@deployingradius.com> wrote:
build wrote:
G'day Oliver, Thank you for that, no wonder :-( However the build looks scary so I: :/# patch -pl < freeradius-openssl.patch patch: **** strip count l is not a number :/#
Is this easily fixed?
It's "-p1", not "-pl". As in "one".
Alan DeKok.
Thank you both your patience is appreciated. The build failed?
user1@box1:/TEMP/freeradius-1.1.7$ dpkg-buildpackage -rfakeroot dpkg-buildpackage: source package is freeradius dpkg-buildpackage: source version is 1.1.7-1 dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org> sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) dpkg-buildpackage: host architecture i386 dpkg-buildpackage: source version without epoch 1.1.7-1 sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) sh: gcc: command not found dpkg-architecture: warning: Couldn't determine gcc system type, falling back to default (native compilation) dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev libssl-dev dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. dpkg-buildpackage: (Use -d flag to override.) user1@box1:/TEMP/freeradius-1.1.7$
and I have no bloody idea what to do. or have I tested your patience to it's limit?
Thanks in anticipation, build - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
G'day Patrice, It did not occur to me that gcc was a package. Installed gcc. But: dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev libssl-dev dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. dpkg-buildpackage: (Use -d flag to override.) user1@box1:/freeradius-1.1.7$ Did I make an error? Thanks build On 21/11/2007, OLIVER Patrice <patrice.oliver@ch-beaune.fr> wrote: > Is gcc installed ? > > Cordialement, > > ---------------------------------------- > Patrice OLIVER > > -----Original Message----- > From: build <buildy@gmail.com> > To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> > Date: Wed, 21 Nov 2007 21:06:43 +1100 > Subject: Re: WPA HOWTO > > > On 21/11/2007, Alan DeKok <aland@deployingradius.com> wrote: > > > build wrote: > > > > G'day Oliver, > > > > Thank you for that, no wonder :-( > > > > However the build looks scary so I: > > > > :/# patch -pl < freeradius-openssl.patch > > > > patch: **** strip count l is not a number > > > > :/# > > > > > > > > Is this easily fixed? > > > > > > It's "-p1", not "-pl". As in "one". > > > > > > Alan DeKok. > > > > Thank you both your patience is appreciated. > > The build failed? > > > > user1@box1:/TEMP/freeradius-1.1.7$ dpkg-buildpackage -rfakeroot > > dpkg-buildpackage: source package is freeradius > > dpkg-buildpackage: source version is 1.1.7-1 > > dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org> > > sh: gcc: command not found > > dpkg-architecture: warning: Couldn't determine gcc system type, > > falling back to default (native compilation) > > sh: gcc: command not found > > dpkg-architecture: warning: Couldn't determine gcc system type, > > falling back to default (native compilation) > > dpkg-buildpackage: host architecture i386 > > dpkg-buildpackage: source version without epoch 1.1.7-1 > > sh: gcc: command not found > > dpkg-architecture: warning: Couldn't determine gcc system type, > > falling back to default (native compilation) > > sh: gcc: command not found > > dpkg-architecture: warning: Couldn't determine gcc system type, > > falling back to default (native compilation) > > dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) > > libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev > > libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp > > autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev > > libssl-dev > > dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. > > dpkg-buildpackage: (Use -d flag to override.) > > user1@box1:/TEMP/freeradius-1.1.7$ > > > > and I have no bloody idea what to do. > > or have I tested your patience to it's limit? > > > > Thanks in anticipation, > > build > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html >
> G'day Patrice, > It did not occur to me that gcc was a package. Installed gcc. > But: > dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) > libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev > libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp > autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev > libssl-dev > dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. > dpkg-buildpackage: (Use -d flag to override.) > user1@box1:/freeradius-1.1.7$ > > Did I make an error? Are all these packages installed ? > > Thanks > build > > > On 21/11/2007, OLIVER Patrice <patrice.oliver@ch-beaune.fr> wrote: > > Is gcc installed ? > > > > Cordialement, > > > > ---------------------------------------- > > Patrice OLIVER > > > > -----Original Message----- > > From: build <buildy@gmail.com> > > To: "FreeRadius users mailing list" <freeradius-users@lists.freeradius.org> > > Date: Wed, 21 Nov 2007 21:06:43 +1100 > > Subject: Re: WPA HOWTO > > > > > On 21/11/2007, Alan DeKok <aland@deployingradius.com> wrote: > > > > build wrote: > > > > > G'day Oliver, > > > > > Thank you for that, no wonder :-( > > > > > However the build looks scary so I: > > > > > :/# patch -pl < freeradius-openssl.patch > > > > > patch: **** strip count l is not a number > > > > > :/# > > > > > > > > > > Is this easily fixed? > > > > > > > > It's "-p1", not "-pl". As in "one". > > > > > > > > Alan DeKok. > > > > > > Thank you both your patience is appreciated. > > > The build failed? > > > > > > user1@box1:/TEMP/freeradius-1.1.7$ dpkg-buildpackage -rfakeroot > > > dpkg-buildpackage: source package is freeradius > > > dpkg-buildpackage: source version is 1.1.7-1 > > > dpkg-buildpackage: source changed by Stephen Gran <sgran@debian.org> > > > sh: gcc: command not found > > > dpkg-architecture: warning: Couldn't determine gcc system type, > > > falling back to default (native compilation) > > > sh: gcc: command not found > > > dpkg-architecture: warning: Couldn't determine gcc system type, > > > falling back to default (native compilation) > > > dpkg-buildpackage: host architecture i386 > > > dpkg-buildpackage: source version without epoch 1.1.7-1 > > > sh: gcc: command not found > > > dpkg-architecture: warning: Couldn't determine gcc system type, > > > falling back to default (native compilation) > > > sh: gcc: command not found > > > dpkg-architecture: warning: Couldn't determine gcc system type, > > > falling back to default (native compilation) > > > dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5) > > > libltdl3-dev libpam0g-dev libmysqlclient15-dev | libmysqlclient-dev > > > libgdbm-dev libldap2-dev libsasl2-dev libiodbc2-dev libkrb5-dev snmp > > > autotools-dev dpatch (>= 2) libperl-dev libtool libpq-dev libsnmp-dev > > > libssl-dev > > > dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting. > > > dpkg-buildpackage: (Use -d flag to override.) > > > user1@box1:/TEMP/freeradius-1.1.7$ > > > > > > and I have no bloody idea what to do. > > > or have I tested your patience to it's limit? > > > > > > Thanks in anticipation, > > > build > > > - > > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - > > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (3)
-
Alan DeKok -
build -
OLIVER Patrice