Cannot connect to Win10 PC with client certificate (no connection possible)
Hi, all! I installed CA and client certificates on Win 10 Pro client PC and configured a certificate based WLAN profile via Cisco AP (named ciscosb) to freeradius. (login via certificate, no password). But I dont't get it to work. PC says "no connection to this network possible". Windows WLAN report says "Error during authentification of EAP method type 13. Error: 0x54F. And it also says : Disconnect reason: explicit Eap error. I'm still not clear where to find the issue: Client PC or Cisco AP or freeradius configuration. Here is the log of one connection attempt. Could you please check if from radius perspective everything looks ok? Thanks a lot! Uwe FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 ipv4addr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "LDAPServer" port = 389 identity = "cn=admin,dc=kms,dc=de" password = <<< secret >>> sasl { } valuepair_attribute = "radiusAttribute" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=groupOfNames)" scope = "sub" name_attribute = "cn" membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = yes cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=kms,dc=de" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüà âæçèéêëîïôÅùûüaÿÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÅÃÃß" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } instantiate { } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20447 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:334 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 39463 Listening on proxy address :: port 35211 Ready to process requests (0) Received Access-Request Id 23 from 192.168.188.45:41837 to 192.168.188.50:1812 length 174 (0) User-Name = "host/RadiusClient" (0) NAS-IP-Address = 192.168.1.245 (0) NAS-Port = 0 (0) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (0) Calling-Station-Id = "24-41-8C-4E-CA-B9" (0) Framed-MTU = 1400 (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11g" (0) EAP-Message = 0x0200001601686f73742f526164697573436c69656e74 (0) Message-Authenticator = 0x3b4fe4a59f73c0b31684f6b9c5a8387f (0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "host/RadiusClient", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 0 length 22 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = eap (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_md5 to process data (0) eap_md5: Issuing MD5 Challenge (0) eap: Sending EAP Request (code 1) ID 1 length 22 (0) eap: EAP session adding &reply:State = 0xc9df8823c9de8c01 (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (0) Challenge { ... } # empty sub-section is ignored (0) Sent Access-Challenge Id 23 from 192.168.188.50:1812 to 192.168.188.45:41837 length 0 (0) EAP-Message = 0x0101001604107528b5d8ffd31ed0736adf8aded7efa2 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0xc9df8823c9de8c015646fbec6ae272f2 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 24 from 192.168.188.45:41837 to 192.168.188.50:1812 length 176 (1) User-Name = "host/RadiusClient" (1) NAS-IP-Address = 192.168.1.245 (1) NAS-Port = 0 (1) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (1) Calling-Station-Id = "24-41-8C-4E-CA-B9" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11g" (1) EAP-Message = 0x02010006030d (1) State = 0xc9df8823c9de8c015646fbec6ae272f2 (1) Message-Authenticator = 0x58b1b87c2350c89ce023b7c5a1152bea (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "host/RadiusClient", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 1 length 6 (1) eap: No EAP Start, assuming it's an on-going EAP conversation (1) [eap] = updated (1) [files] = noop rlm_ldap (ldap): Reserved connection (0) (1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (1) ldap: --> (uid=host/RadiusClient) (1) ldap: Performing search in "dc=kms,dc=de" with filter "(uid=host/RadiusClient)", scope "sub" (1) ldap: Waiting for search result... (1) ldap: User object found at DN "uid=host/RadiusClient,ou=people,dc=kms,dc=de" (1) ldap: EXPAND (&(objectClass=groupOfNames)(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (1) ldap: --> (&(objectClass=groupOfNames)(|(member=uid\3dhost/RadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=host/RadiusClient))) (1) ldap: Performing search in "dc=kms,dc=de" with filter "(&(objectClass=groupOfNames)(|(member=uid\3dhost/RadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=host/RadiusClient)))", scope "sub" (1) ldap: Waiting for search result... (1) ldap: Search returned no results (1) ldap: No cacheable group memberships found in group objects (1) ldap: Processing user attributes (1) ldap: control:Password-With-Header += 'mydummypassword' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (1) [ldap] = updated (1) [expiration] = noop (1) [logintime] = noop (1) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (1) pap: Removing &control:Password-With-Header (1) pap: WARNING: Auth-Type already set. Not setting to PAP (1) [pap] = noop (1) } # authorize = updated (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0xc9df8823c9de8c01 (1) eap: Finished EAP session with state 0xc9df8823c9de8c01 (1) eap: Previous EAP request found for state 0xc9df8823c9de8c01, released from the list (1) eap: Peer sent packet with method EAP NAK (3) (1) eap: Found mutually acceptable type TLS (13) (1) eap: Calling submodule eap_tls to process data (1) eap_tls: Initiating new EAP-TLS session (1) eap_tls: Setting verify mode to require certificate from client (1) eap_tls: [eaptls start] = request (1) eap: Sending EAP Request (code 1) ID 2 length 6 (1) eap: EAP session adding &reply:State = 0xc9df8823c8dd8501 (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 24 from 192.168.188.50:1812 to 192.168.188.45:41837 length 0 (1) EAP-Message = 0x010200060d20 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xc9df8823c8dd85015646fbec6ae272f2 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 25 from 192.168.188.45:41837 to 192.168.188.50:1812 length 174 (2) User-Name = "host/RadiusClient" (2) NAS-IP-Address = 192.168.1.245 (2) NAS-Port = 0 (2) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (2) Calling-Station-Id = "24-41-8C-4E-CA-B9" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11g" (2) EAP-Message = 0x0200001601686f73742f526164697573436c69656e74 (2) Message-Authenticator = 0x6bb8bc01b38cfbb96fd02f67096577e5 (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "host/RadiusClient", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 0 length 22 (2) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Peer sent packet with method EAP Identity (1) (2) eap: Calling submodule eap_md5 to process data (2) eap_md5: Issuing MD5 Challenge (2) eap: Sending EAP Request (code 1) ID 1 length 22 (2) eap: EAP session adding &reply:State = 0xca374eaeca364a72 (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 25 from 192.168.188.50:1812 to 192.168.188.45:41837 length 0 (2) EAP-Message = 0x01010016041040ba8bec57e9693bd0c6bc053ddb69c9 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xca374eaeca364a720219c4f185b69853 (2) Finished request Waking up in 4.1 seconds. (3) Received Access-Request Id 26 from 192.168.188.45:41837 to 192.168.188.50:1812 length 176 (3) User-Name = "host/RadiusClient" (3) NAS-IP-Address = 192.168.1.245 (3) NAS-Port = 0 (3) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (3) Calling-Station-Id = "24-41-8C-4E-CA-B9" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11g" (3) EAP-Message = 0x02010006030d (3) State = 0xca374eaeca364a720219c4f185b69853 (3) Message-Authenticator = 0x631455556a9f0d894f13e6e3bbf1d50c (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "host/RadiusClient", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 1 length 6 (3) eap: No EAP Start, assuming it's an on-going EAP conversation (3) [eap] = updated (3) [files] = noop rlm_ldap (ldap): Reserved connection (1) (3) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (3) ldap: --> (uid=host/RadiusClient) (3) ldap: Performing search in "dc=kms,dc=de" with filter "(uid=host/RadiusClient)", scope "sub" (3) ldap: Waiting for search result... (3) ldap: User object found at DN "uid=host/RadiusClient,ou=people,dc=kms,dc=de" (3) ldap: EXPAND (&(objectClass=groupOfNames)(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (3) ldap: --> (&(objectClass=groupOfNames)(|(member=uid\3dhost/RadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=host/RadiusClient))) (3) ldap: Performing search in "dc=kms,dc=de" with filter "(&(objectClass=groupOfNames)(|(member=uid\3dhost/RadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=host/RadiusClient)))", scope "sub" (3) ldap: Waiting for search result... (3) ldap: Search returned no results (3) ldap: No cacheable group memberships found in group objects (3) ldap: Processing user attributes (3) ldap: control:Password-With-Header += 'mydummypassword' rlm_ldap (ldap): Released connection (1) Need 4 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (3) [ldap] = updated (3) [expiration] = noop (3) [logintime] = noop (3) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (3) pap: Removing &control:Password-With-Header (3) pap: WARNING: Auth-Type already set. Not setting to PAP (3) [pap] = noop (3) } # authorize = updated (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xc9df8823c8dd8501 (3) eap: Finished EAP session with state 0xca374eaeca364a72 (3) eap: Previous EAP request found for state 0xca374eaeca364a72, released from the list (3) eap: Peer sent packet with method EAP NAK (3) (3) eap: Found mutually acceptable type TLS (13) (3) eap: Calling submodule eap_tls to process data (3) eap_tls: Initiating new EAP-TLS session (3) eap_tls: Setting verify mode to require certificate from client (3) eap_tls: [eaptls start] = request (3) eap: Sending EAP Request (code 1) ID 2 length 6 (3) eap: EAP session adding &reply:State = 0xca374eaecb354372 (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 26 from 192.168.188.50:1812 to 192.168.188.45:41837 length 0 (3) EAP-Message = 0x010200060d20 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xca374eaecb3543720219c4f185b69853 (3) Finished request Waking up in 4.1 seconds.
On Jan 14, 2020, at 8:32 AM, uj2.hahn@posteo.de wrote:
I installed CA and client certificates on Win 10 Pro client PC and configured a certificate based WLAN profile via Cisco AP (named ciscosb) to freeradius. (login via certificate, no password). But I dont't get it to work. PC says "no connection to this network possible". Windows WLAN report says "Error during authentification of EAP method type 13. Error: 0x54F. And it also says : Disconnect reason: explicit Eap error.
Ask Windows what "Error 0x54F" means.
I'm still not clear where to find the issue: Client PC or Cisco AP or freeradius configuration.
Here is the log of one connection attempt. Could you please check if from radius perspective everything looks ok? ... (3) Sent Access-Challenge Id 26 from 192.168.188.50:1812 to 192.168.188.45:41837 length 0 (3) EAP-Message = 0x010200060d20 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xca374eaecb3543720219c4f185b69853 (3) Finished request Waking up in 4.1 seconds.
And nothing. The Windows system decided that it didn't like the server certificate, and stopped doing EAP. Where did you get these certs from? Are you using the testing certs from raddb/certs? Those *do* work. Alan DeKok.
The Windows system decided that it didn't like the server certificate, and stopped doing EAP.
Where did you get these certs from? Are you using the testing certs from raddb/certs? Those *do* work. I created the certs on my side via the method described in freeradius certs folder. And they do work with my Android devices. But I will follow the hint and use the testing certs. Thanks for now Uwe Am 14.01.2020 14:42 schrieb Alan DeKok:
On Jan 14, 2020, at 8:32 AM, uj2.hahn@posteo.de wrote:
I installed CA and client certificates on Win 10 Pro client PC and configured a certificate based WLAN profile via Cisco AP (named ciscosb) to freeradius. (login via certificate, no password). But I dont't get it to work. PC says "no connection to this network possible". Windows WLAN report says "Error during authentification of EAP method type 13. Error: 0x54F. And it also says : Disconnect reason: explicit Eap error.
Ask Windows what "Error 0x54F" means.
I'm still not clear where to find the issue: Client PC or Cisco AP or freeradius configuration.
Here is the log of one connection attempt. Could you please check if from radius perspective everything looks ok? ... (3) Sent Access-Challenge Id 26 from 192.168.188.50:1812 to 192.168.188.45:41837 length 0 (3) EAP-Message = 0x010200060d20 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xca374eaecb3543720219c4f185b69853 (3) Finished request Waking up in 4.1 seconds.
And nothing.
The Windows system decided that it didn't like the server certificate, and stopped doing EAP.
Where did you get these certs from? Are you using the testing certs from raddb/certs? Those *do* work.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Top posting; If they [your certs] work on Android, it's likely not the certs that are the problem. I don't have the detail in front of me, but setting up EAP-TLS on Win10 is somewhat confusing. [At least it was last time I did it.] I'd probably do some google searches to determine how you configure Win10 properly, while configuring the Wireless connection. If I get a chance, I'll go see if I have some documentation that describes it.
The Windows system decided that it didn't like the server certificate, uhpd> and stopped doing EAP.
uhpd> Where did you get these certs from? Are you using the testing uhpd> certs from raddb/certs? Those *do* work. uhpd> I created the certs on my side via the method described in freeradius uhpd> certs folder. uhpd> And they do work with my Android devices. uhpd> But I will follow the hint and use the testing certs. uhpd> Thanks for now uhpd> Uwe
On Jan 14, 2020, at 9:13 AM, uj2.hahn@posteo.de wrote:
The Windows system decided that it didn't like the server certificate, and stopped doing EAP.
Where did you get these certs from? Are you using the testing certs from raddb/certs? Those *do* work.
I created the certs on my side via the method described in freeradius certs folder.
Then the certs are OK.
And they do work with my Android devices. But I will follow the hint and use the testing certs.
The important thing is to use the scripts in raddb/certs. They set up all the various certificate magic that Windows likes. It's likely that the certs are OK, and that you're missing some magic configuration on the Windows side. Alan DeKok.
Hi! While I'm still struggling with my issue I read documentation again and again, especially about the cert documents. Now I'm so confused that I like to come back to some basic questions: raddb/certs/README says: $ vi client.cnf Edit the "input_password" and "output_password" fields to be the password for the client certificate. You will have to give these passwords to the end user who will be using the certificates. and later: $ make client.pem The users certificate will be in "emailAddress.pem", i.e. "user@example.com.pem". The bootstrap script is indeed creating this email-like certificate. But when I install it on the client PC there is no password needed (but installation is successfull). But in addition the bootstrap script generates 5 more client files (client.pem, client.key etc.). When I install those I'm asked for the password (as expected). So: what is the correct file to load into the PC as client cert for EAP-TLS? And one more question: raddb/certs/README says: MAKING A SERVER CERTIFICATE The following steps will let you create a server certificate for use with TLS-based EAP methods, such as EAP-TLS, PEAP, and TTLS. Follow similar steps to create an "inner-server.pem" file, for use with EAP-TLS that is tunneled inside of another TLS-based EAP method. The bootstrap script does not care about this inner-server.cfg config file and does not generate inner-server.pem. Is it correct? The Makefile does have an entry for that but this is not used by the bootstrap file. Is it on intention? Thanks Uwe On 14.01.2020 17:16, Alan DeKok wrote:
On Jan 14, 2020, at 9:13 AM, uj2.hahn@posteo.de wrote:
The Windows system decided that it didn't like the server certificate, and stopped doing EAP.
Where did you get these certs from? Are you using the testing certs from raddb/certs? Those *do* work.
I created the certs on my side via the method described in freeradius certs folder.
Then the certs are OK.
And they do work with my Android devices. But I will follow the hint and use the testing certs.
The important thing is to use the scripts in raddb/certs. They set up all the various certificate magic that Windows likes. It's likely that the certs are OK, and that you're missing some magic configuration on the Windows side. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html [1] Links: ------ [1] http://www.freeradius.org/list/users.html
On Jan 14, 2020, at 2:43 PM, uj2.hahn@posteo.de wrote:
While I'm still struggling with my issue I read documentation again and again, especially about the cert documents. Now I'm so confused that I like to come back to some basic questions:
raddb/certs/README says:
$ vi client.cnf
Edit the "input_password" and "output_password" fields to be the password for the client certificate. You will have to give these passwords to the end user who will be using the certificates.
and later: $ make client.pem
The users certificate will be in "emailAddress.pem", i.e. "user@example.com.pem".
The bootstrap script is indeed creating this email-like certificate. But when I install it on the client PC there is no password needed (but installation is successfull).
Yes, a certificate doesn't need a signature.
But in addition the bootstrap script generates 5 more client files (client.pem, client.key etc.). When I install those I'm asked for the password (as expected). So: what is the correct file to load into the PC as client cert for EAP-TLS?
The client certificate, and the client key. The certificate has various forms (PEM, CRT, etc.). You only need one.
And one more question:
raddb/certs/README says:
MAKING A SERVER CERTIFICATE
The following steps will let you create a server certificate for use with TLS-based EAP methods, such as EAP-TLS, PEAP, and TTLS. Follow similar steps to create an "inner-server.pem" file, for use with EAP-TLS that is tunneled inside of another TLS-based EAP method.
The bootstrap script does not care about this inner-server.cfg config file and does not generate inner-server.pem. Is it correct? The Makefile does have an entry for that but this is not used by the bootstrap file. Is it on intention?
Yes. The inner-server certificate is used for mods-available/inner-eap. If you don't use that module, then the inner-server certificate isn't necessary. Alan DeKok.
Hi! I think I got it to work!! To refresh the memory: Radius based WLAN access control in a school for students and teachers. But there are some school-owned Win 10 tablets which should be able to login automatically via Radius client certificates. It seems it is working now! Thanks for your great support! Can you guys do me the favor to confirm that everything is going right with the certs (see debug file below)? Once you confirm, then I have a new question: We use a Captive Portal connected to the freeradius server. This is fine to let user accept terms and conditions etc. But for the special user behind the client certificate ("RadiusClient") we don't want to see this Captive Portal web site. Is there anything freeradius can do or is it purely a CP configuration thing? Thanks a lot Uwe ----------------------- FreeRADIUS Version 3.0.17 Copyright (C) 1999-2017 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/freeradius/3.0/dictionary including configuration file /etc/freeradius/3.0/radiusd.conf including configuration file /etc/freeradius/3.0/proxy.conf including configuration file /etc/freeradius/3.0/clients.conf including files in directory /etc/freeradius/3.0/mods-enabled/ including configuration file /etc/freeradius/3.0/mods-enabled/soh including configuration file /etc/freeradius/3.0/mods-enabled/detail including configuration file /etc/freeradius/3.0/mods-enabled/exec including configuration file /etc/freeradius/3.0/mods-enabled/eap including configuration file /etc/freeradius/3.0/mods-enabled/unpack including configuration file /etc/freeradius/3.0/mods-enabled/digest including configuration file /etc/freeradius/3.0/mods-enabled/preprocess including configuration file /etc/freeradius/3.0/mods-enabled/ldap including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp including configuration file /etc/freeradius/3.0/mods-enabled/utf8 including configuration file /etc/freeradius/3.0/mods-enabled/radutmp including configuration file /etc/freeradius/3.0/mods-enabled/mschap including configuration file /etc/freeradius/3.0/mods-enabled/logintime including configuration file /etc/freeradius/3.0/mods-enabled/passwd including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth including configuration file /etc/freeradius/3.0/mods-enabled/always including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients including configuration file /etc/freeradius/3.0/mods-enabled/expr including configuration file /etc/freeradius/3.0/mods-enabled/realm including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter including configuration file /etc/freeradius/3.0/mods-enabled/files including configuration file /etc/freeradius/3.0/mods-enabled/echo including configuration file /etc/freeradius/3.0/mods-enabled/unix including configuration file /etc/freeradius/3.0/mods-enabled/chap including configuration file /etc/freeradius/3.0/mods-enabled/linelog including configuration file /etc/freeradius/3.0/mods-enabled/expiration including configuration file /etc/freeradius/3.0/mods-enabled/replicate including configuration file /etc/freeradius/3.0/mods-enabled/detail.log including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap including configuration file /etc/freeradius/3.0/mods-enabled/pap including files in directory /etc/freeradius/3.0/policy.d/ including configuration file /etc/freeradius/3.0/policy.d/canonicalization including configuration file /etc/freeradius/3.0/policy.d/operator-name including configuration file /etc/freeradius/3.0/policy.d/eap including configuration file /etc/freeradius/3.0/policy.d/abfab-tr including configuration file /etc/freeradius/3.0/policy.d/cui including configuration file /etc/freeradius/3.0/policy.d/accounting including configuration file /etc/freeradius/3.0/policy.d/filter including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids including configuration file /etc/freeradius/3.0/policy.d/debug including configuration file /etc/freeradius/3.0/policy.d/control including configuration file /etc/freeradius/3.0/policy.d/dhcp including files in directory /etc/freeradius/3.0/sites-enabled/ including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel including configuration file /etc/freeradius/3.0/sites-enabled/default main { security { user = "freerad" group = "freerad" allow_core_dumps = no } name = "freeradius" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" } main { name = "freeradius" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/freeradius" run_dir = "/var/run/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 ipv4addr = * require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Debugger not attached # Creating Auth-Type = mschap # Creating Auth-Type = eap # Creating Auth-Type = PAP # Creating Auth-Type = CHAP # Creating Auth-Type = MS-CHAP # Creating Auth-Type = LDAP # Creating Auth-Type = digest radiusd: #### Instantiating modules #### modules { # Loaded module rlm_soh # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_detail # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail detail { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_eap # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack # Loaded module rlm_digest # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess preprocess { huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups" hints = "/etc/freeradius/3.0/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_ldap # Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap ldap { server = "LDAPServer" port = 389 identity = "cn=admin,dc=kms,dc=de" password = <<< secret >>> sasl { } valuepair_attribute = "radiusAttribute" user { scope = "sub" access_positive = yes sasl { } } group { filter = "(objectClass=groupOfNames)" scope = "sub" name_attribute = "cn" membership_filter = "(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))" cacheable_name = yes cacheable_dn = no } client { filter = "(objectClass=radiusClient)" scope = "sub" base_dn = "dc=kms,dc=de" } profile { } options { ldap_debug = 40 chase_referrals = yes rebind = yes net_timeout = 1 res_timeout = 10 srv_timelimit = 3 idle = 60 probes = 3 interval = 3 } tls { start_tls = no } } Creating attribute LDAP-Group # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/freeradius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8 # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes winbind_retry_with_normalised_username = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loaded module rlm_always # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients # Loaded module rlm_expr # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüà âæçèéêëîïôÅùûüaÿÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÅÃÃß" } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_files # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files files { filename = "/etc/freeradius/3.0/mods-config/files/authorize" acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting" preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy" } # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_unix # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_chap # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap # Loaded module rlm_linelog # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog linelog { filename = "/var/log/freeradius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog linelog log_accounting { filename = "/var/log/freeradius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Loaded module rlm_replicate # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail auth_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail reply_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap pap { normalise = yes } instantiate { } # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { verify_depth = 0 ca_path = "/etc/freeradius/3.0/certs" pem_file_type = yes private_key_file = "/etc/freeradius/3.0/certs/server.key" certificate_file = "/etc/freeradius/3.0/certs/server.pem" ca_file = "/etc/freeradius/3.0/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/freeradius/3.0/certs/dh" fragment_size = 1024 include_length = yes auto_chain = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" cipher_server_preference = no ecdh_curve = "prime256v1" tls_max_version = "" tls_min_version = "1.0" cache { enable = no lifetime = 24 max_entries = 255 } verify { skip_if_ocsp_ok = no } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "md5" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints # Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap rlm_ldap: libldap vendor: OpenLDAP, version: 20447 accounting { reference = "%{tolower:type.%{Acct-Status-Type}}" } post-auth { reference = "." } rlm_ldap (ldap): Initialising connection pool pool { start = 5 min = 3 max = 32 spare = 10 uses = 0 lifetime = 0 cleanup_interval = 30 idle_timeout = 60 retry_delay = 30 spread = no } rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap rlm_mschap (mschap): using internal authentication # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/freeradius/3.0/radiusd.conf } # server server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} # Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:334 } # server inner-tunnel server default { # from file /etc/freeradius/3.0/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on proxy address * port 33818 Listening on proxy address :: port 48284 Ready to process requests (0) Received Accounting-Request Id 51 from 192.168.188.45:45179 to 192.168.188.50:1813 length 190 (0) Acct-Session-Id = "00000000-00000003" (0) Acct-Status-Type = Stop (0) Acct-Authentic = RADIUS (0) User-Name = "RadiusClient" (0) NAS-IP-Address = 192.168.188.45 (0) NAS-Port = 0 (0) Called-Station-Id = "88-90-8D-42-55-71:ciscogast" (0) Calling-Station-Id = "24-41-8C-4E-CA-B9" (0) NAS-Port-Type = Wireless-802.11 (0) Connect-Info = "CONNECT 0Mbps 802.11g" (0) Acct-Session-Time = 444 (0) Acct-Input-Packets = 713 (0) Acct-Output-Packets = 1021 (0) Acct-Input-Octets = 103182 (0) Acct-Output-Octets = 688473 (0) Acct-Terminate-Cause = User-Request (0) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (0) preacct { (0) [preprocess] = ok (0) policy acct_unique { (0) update request { (0) &Tmp-String-9 := "ai:" (0) } # update request = noop (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (0) EXPAND %{hex:&Class} (0) --> (0) EXPAND ^%{hex:&Tmp-String-9} (0) --> ^61693a (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (0) else { (0) update request { (0) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (0) --> 30464ae3958b0218bc506c8fb55b4773 (0) &Acct-Unique-Session-Id := 30464ae3958b0218bc506c8fb55b4773 (0) } # update request = noop (0) } # else = noop (0) } # policy acct_unique = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) [files] = noop (0) } # preacct = ok (0) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (0) accounting { (0) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (0) detail: --> /var/log/freeradius/radacct/192.168.188.45/detail-20200115 (0) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.188.45/detail-20200115 (0) detail: EXPAND %t (0) detail: --> Wed Jan 15 16:17:16 2020 (0) [detail] = ok (0) [unix] = ok (0) [exec] = noop (0) attr_filter.accounting_response: EXPAND %{User-Name} (0) attr_filter.accounting_response: --> RadiusClient (0) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (0) [attr_filter.accounting_response] = updated (0) } # accounting = updated (0) Sent Accounting-Response Id 51 from 192.168.188.50:1813 to 192.168.188.45:45179 length 0 (0) Finished request (0) Cleaning up request packet ID 51 with timestamp +6 Ready to process requests (1) Received Access-Request Id 26 from 192.168.188.45:51338 to 192.168.188.50:1812 length 164 (1) User-Name = "RadiusClient" (1) NAS-IP-Address = 192.168.188.45 (1) NAS-Port = 0 (1) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (1) Calling-Station-Id = "24-41-8C-4E-CA-B9" (1) Framed-MTU = 1400 (1) NAS-Port-Type = Wireless-802.11 (1) Connect-Info = "CONNECT 0Mbps 802.11g" (1) EAP-Message = 0x0200001101526164697573436c69656e74 (1) Message-Authenticator = 0x174f35d75dd63eb03bbf398eb0c22e37 (1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (1) authorize { (1) policy filter_username { (1) if (&User-Name) { (1) if (&User-Name) -> TRUE (1) if (&User-Name) { (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@[^@]*@/ ) { (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # if (&User-Name) = notfound (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 0 length 17 (1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = eap (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) authenticate { (1) eap: Peer sent packet with method EAP Identity (1) (1) eap: Calling submodule eap_md5 to process data (1) eap_md5: Issuing MD5 Challenge (1) eap: Sending EAP Request (code 1) ID 1 length 22 (1) eap: EAP session adding &reply:State = 0xe659d40ae658d00c (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (1) Challenge { ... } # empty sub-section is ignored (1) Sent Access-Challenge Id 26 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (1) EAP-Message = 0x010100160410787b518c7ddea6946b2c05a791365c92 (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0xe659d40ae658d00cb96e159a7fde31f1 (1) Finished request Waking up in 4.9 seconds. (2) Received Access-Request Id 27 from 192.168.188.45:51338 to 192.168.188.50:1812 length 171 (2) User-Name = "RadiusClient" (2) NAS-IP-Address = 192.168.188.45 (2) NAS-Port = 0 (2) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (2) Calling-Station-Id = "24-41-8C-4E-CA-B9" (2) Framed-MTU = 1400 (2) NAS-Port-Type = Wireless-802.11 (2) Connect-Info = "CONNECT 0Mbps 802.11g" (2) EAP-Message = 0x020100060319 (2) State = 0xe659d40ae658d00cb96e159a7fde31f1 (2) Message-Authenticator = 0x48756f789955f82a9f7653443110e745 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (2) authorize { (2) policy filter_username { (2) if (&User-Name) { (2) if (&User-Name) -> TRUE (2) if (&User-Name) { (2) if (&User-Name =~ / /) { (2) if (&User-Name =~ / /) -> FALSE (2) if (&User-Name =~ /@[^@]*@/ ) { (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (2) if (&User-Name =~ /\.\./ ) { (2) if (&User-Name =~ /\.\./ ) -> FALSE (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (2) if (&User-Name =~ /\.$/) { (2) if (&User-Name =~ /\.$/) -> FALSE (2) if (&User-Name =~ /@\./) { (2) if (&User-Name =~ /@\./) -> FALSE (2) } # if (&User-Name) = notfound (2) } # policy filter_username = notfound (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Checking for suffix after "@" (2) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (2) suffix: No such realm "NULL" (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 1 length 6 (2) eap: No EAP Start, assuming it's an on-going EAP conversation (2) [eap] = updated (2) [files] = noop rlm_ldap (ldap): Reserved connection (0) (2) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (2) ldap: --> (uid=RadiusClient) (2) ldap: Performing search in "dc=kms,dc=de" with filter "(uid=RadiusClient)", scope "sub" (2) ldap: Waiting for search result... (2) ldap: User object found at DN "uid=RadiusClient,ou=people,dc=kms,dc=de" (2) ldap: EXPAND (&(objectClass=groupOfNames)(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (2) ldap: --> (&(objectClass=groupOfNames)(|(member=uid\3dRadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=RadiusClient))) (2) ldap: Performing search in "dc=kms,dc=de" with filter "(&(objectClass=groupOfNames)(|(member=uid\3dRadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=RadiusClient)))", scope "sub" (2) ldap: Waiting for search result... (2) ldap: Search returned no results (2) ldap: No cacheable group memberships found in group objects (2) ldap: Processing user attributes (2) ldap: control:Password-With-Header += 'myPassword' rlm_ldap (ldap): Released connection (0) Need 5 more connections to reach 10 spares rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used rlm_ldap (ldap): Connecting to ldap://LDAPServer:389 rlm_ldap (ldap): Waiting for bind result... rlm_ldap (ldap): Bind successful (2) [ldap] = updated (2) [expiration] = noop (2) [logintime] = noop (2) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (2) pap: Removing &control:Password-With-Header (2) pap: WARNING: Auth-Type already set. Not setting to PAP (2) [pap] = noop (2) } # authorize = updated (2) Found Auth-Type = eap (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0xe659d40ae658d00c (2) eap: Finished EAP session with state 0xe659d40ae658d00c (2) eap: Previous EAP request found for state 0xe659d40ae658d00c, released from the list (2) eap: Peer sent packet with method EAP NAK (3) (2) eap: Found mutually acceptable type PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Initiating new EAP-TLS session (2) eap_peap: [eaptls start] = request (2) eap: Sending EAP Request (code 1) ID 2 length 6 (2) eap: EAP session adding &reply:State = 0xe659d40ae75bcd0c (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (2) Challenge { ... } # empty sub-section is ignored (2) Sent Access-Challenge Id 27 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (2) EAP-Message = 0x010200061920 (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0xe659d40ae75bcd0cb96e159a7fde31f1 (2) Finished request Waking up in 4.9 seconds. (3) Received Access-Request Id 28 from 192.168.188.45:51338 to 192.168.188.50:1812 length 331 (3) User-Name = "RadiusClient" (3) NAS-IP-Address = 192.168.188.45 (3) NAS-Port = 0 (3) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (3) Calling-Station-Id = "24-41-8C-4E-CA-B9" (3) Framed-MTU = 1400 (3) NAS-Port-Type = Wireless-802.11 (3) Connect-Info = "CONNECT 0Mbps 802.11g" (3) EAP-Message = 0x020200a619800000009c16030300970100009303035e206a7309f7f2b8803df7bd4a44b58690df5192d54824ad06f0cbde250ca18600002ac02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c013009d009c003d003c0035002f000a01000040000500050100000000000a00080006001d (3) State = 0xe659d40ae75bcd0cb96e159a7fde31f1 (3) Message-Authenticator = 0x4106dec495d086ada4be56113ac1fb7f (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (3) authorize { (3) policy filter_username { (3) if (&User-Name) { (3) if (&User-Name) -> TRUE (3) if (&User-Name) { (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@[^@]*@/ ) { (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # if (&User-Name) = notfound (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 2 length 166 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = eap (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0xe659d40ae75bcd0c (3) eap: Finished EAP session with state 0xe659d40ae75bcd0c (3) eap: Previous EAP request found for state 0xe659d40ae75bcd0c, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 156 bytes (3) eap_peap: Got complete TLS record (156 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: (other): before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: TLS_accept: before SSL initialization (3) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 0097] (3) eap_peap: TLS_accept: SSLv3/TLS read client hello (3) eap_peap: >>> send TLS 1.2 [length 003d] (3) eap_peap: TLS_accept: SSLv3/TLS write server hello (3) eap_peap: >>> send TLS 1.2 [length 0861] (3) eap_peap: TLS_accept: SSLv3/TLS write certificate (3) eap_peap: >>> send TLS 1.2 [length 014d] (3) eap_peap: TLS_accept: SSLv3/TLS write key exchange (3) eap_peap: >>> send TLS 1.2 [length 0004] (3) eap_peap: TLS_accept: SSLv3/TLS write server done (3) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done (3) eap_peap: In SSL Handshake Phase (3) eap_peap: In SSL Accept mode (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 3 length 1004 (3) eap: EAP session adding &reply:State = 0xe659d40ae45acd0c (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (3) Challenge { ... } # empty sub-section is ignored (3) Sent Access-Challenge Id 28 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (3) EAP-Message = 0x010303ec19c000000a03160303003d0200003903037292093554f683531c23161266e8cf5cd481686ee67cca2a444f574e4752440100c030000011ff01000100000b0004030001020017000016030308610b00085d00085a0003af308203ab30820293a003020102020101300d06092a864886f70d0101 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0xe659d40ae45acd0cb96e159a7fde31f1 (3) Finished request Waking up in 4.9 seconds. (4) Received Access-Request Id 29 from 192.168.188.45:51338 to 192.168.188.50:1812 length 171 (4) User-Name = "RadiusClient" (4) NAS-IP-Address = 192.168.188.45 (4) NAS-Port = 0 (4) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (4) Calling-Station-Id = "24-41-8C-4E-CA-B9" (4) Framed-MTU = 1400 (4) NAS-Port-Type = Wireless-802.11 (4) Connect-Info = "CONNECT 0Mbps 802.11g" (4) EAP-Message = 0x020300061900 (4) State = 0xe659d40ae45acd0cb96e159a7fde31f1 (4) Message-Authenticator = 0x3d5476533151cf3c42946098ca21ca0d (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (4) authorize { (4) policy filter_username { (4) if (&User-Name) { (4) if (&User-Name) -> TRUE (4) if (&User-Name) { (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@[^@]*@/ ) { (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # if (&User-Name) = notfound (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 3 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = eap (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0xe659d40ae45acd0c (4) eap: Finished EAP session with state 0xe659d40ae45acd0c (4) eap: Previous EAP request found for state 0xe659d40ae45acd0c, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment (4) eap_peap: [eaptls verify] = request (4) eap_peap: [eaptls process] = handled (4) eap: Sending EAP Request (code 1) ID 4 length 1000 (4) eap: EAP session adding &reply:State = 0xe659d40ae55dcd0c (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (4) Challenge { ... } # empty sub-section is ignored (4) Sent Access-Challenge Id 29 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (4) EAP-Message = 0x010403e81940fc2aa67b9a5c74c4f268d1eef9d8a2bb9ed397c576002dd366527b921ab80004a5308204a130820389a0030201020214350c72409eeddd5405ae17ff15f1061f3ef03dd9300d06092a864886f70d01010b05003077310b3009060355040613024445310f300d06035504080c0652616469 (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0xe659d40ae55dcd0cb96e159a7fde31f1 (4) Finished request Waking up in 4.9 seconds. (5) Received Access-Request Id 30 from 192.168.188.45:51338 to 192.168.188.50:1812 length 171 (5) User-Name = "RadiusClient" (5) NAS-IP-Address = 192.168.188.45 (5) NAS-Port = 0 (5) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (5) Calling-Station-Id = "24-41-8C-4E-CA-B9" (5) Framed-MTU = 1400 (5) NAS-Port-Type = Wireless-802.11 (5) Connect-Info = "CONNECT 0Mbps 802.11g" (5) EAP-Message = 0x020400061900 (5) State = 0xe659d40ae55dcd0cb96e159a7fde31f1 (5) Message-Authenticator = 0xc0dfda33f4ac3f1bca022b390a61d98a (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (5) authorize { (5) policy filter_username { (5) if (&User-Name) { (5) if (&User-Name) -> TRUE (5) if (&User-Name) { (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@[^@]*@/ ) { (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # if (&User-Name) = notfound (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 4 length 6 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = eap (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0xe659d40ae55dcd0c (5) eap: Finished EAP session with state 0xe659d40ae55dcd0c (5) eap: Previous EAP request found for state 0xe659d40ae55dcd0c, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: Peer ACKed our handshake fragment (5) eap_peap: [eaptls verify] = request (5) eap_peap: [eaptls process] = handled (5) eap: Sending EAP Request (code 1) ID 5 length 581 (5) eap: EAP session adding &reply:State = 0xe659d40ae25ccd0c (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (5) Challenge { ... } # empty sub-section is ignored (5) Sent Access-Challenge Id 30 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (5) EAP-Message = 0x01050245190015bcc7b5a0b1bcac9e37b865b2bf7b6817666f0a858813601c56e884a46f0c41a106b05e9634a7af8ca288c838f0c75fb18acbdee7348511d3afd71e1b53b1ca1d1cbeb98c4857ad229ebba54d64b30a01b7e213a1d11eb8da90340aae165fc3a65f462e94443d6dd570dd909e7c801ed0 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0xe659d40ae25ccd0cb96e159a7fde31f1 (5) Finished request Waking up in 4.9 seconds. (6) Received Access-Request Id 31 from 192.168.188.45:51338 to 192.168.188.50:1812 length 301 (6) User-Name = "RadiusClient" (6) NAS-IP-Address = 192.168.188.45 (6) NAS-Port = 0 (6) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (6) Calling-Station-Id = "24-41-8C-4E-CA-B9" (6) Framed-MTU = 1400 (6) NAS-Port-Type = Wireless-802.11 (6) Connect-Info = "CONNECT 0Mbps 802.11g" (6) EAP-Message = 0x0205008819800000007e16030300461000004241048def5df325d8260ce6cb6a72cc7dfe71acf572db24b8f1ec30711036c4c9b944b989460e8d19ab614dacbbb60298f43d87bc2d11cfd5259fbadd4df0547b95be14030300010116030300280000000000000000de2e55fc8e432111b4dccd671fc850 (6) State = 0xe659d40ae25ccd0cb96e159a7fde31f1 (6) Message-Authenticator = 0x60fc7d135fa8eaeff2af8eecac7a6630 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (6) authorize { (6) policy filter_username { (6) if (&User-Name) { (6) if (&User-Name) -> TRUE (6) if (&User-Name) { (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@[^@]*@/ ) { (6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # if (&User-Name) = notfound (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 5 length 136 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = eap (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0xe659d40ae25ccd0c (6) eap: Finished EAP session with state 0xe659d40ae25ccd0c (6) eap: Previous EAP request found for state 0xe659d40ae25ccd0c, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: Peer indicated complete TLS record size will be 126 bytes (6) eap_peap: Got complete TLS record (126 bytes) (6) eap_peap: [eaptls verify] = length included (6) eap_peap: TLS_accept: SSLv3/TLS write server done (6) eap_peap: <<< recv TLS 1.2 [length 0046] (6) eap_peap: TLS_accept: SSLv3/TLS read client key exchange (6) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec (6) eap_peap: <<< recv TLS 1.2 [length 0010] (6) eap_peap: TLS_accept: SSLv3/TLS read finished (6) eap_peap: >>> send TLS 1.2 [length 0001] (6) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec (6) eap_peap: >>> send TLS 1.2 [length 0010] (6) eap_peap: TLS_accept: SSLv3/TLS write finished (6) eap_peap: (other): SSL negotiation finished successfully (6) eap_peap: SSL Connection Established (6) eap_peap: [eaptls process] = handled (6) eap: Sending EAP Request (code 1) ID 6 length 57 (6) eap: EAP session adding &reply:State = 0xe659d40ae35fcd0c (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (6) Challenge { ... } # empty sub-section is ignored (6) Sent Access-Challenge Id 31 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (6) EAP-Message = 0x01060039190014030300010116030300284d4faad01230335c268ad6fd0b758218a9ab979be038094659872937740a714845e4570c26072aa2 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0xe659d40ae35fcd0cb96e159a7fde31f1 (6) Finished request Waking up in 4.8 seconds. (7) Received Access-Request Id 32 from 192.168.188.45:51338 to 192.168.188.50:1812 length 171 (7) User-Name = "RadiusClient" (7) NAS-IP-Address = 192.168.188.45 (7) NAS-Port = 0 (7) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (7) Calling-Station-Id = "24-41-8C-4E-CA-B9" (7) Framed-MTU = 1400 (7) NAS-Port-Type = Wireless-802.11 (7) Connect-Info = "CONNECT 0Mbps 802.11g" (7) EAP-Message = 0x020600061900 (7) State = 0xe659d40ae35fcd0cb96e159a7fde31f1 (7) Message-Authenticator = 0x75c457a6387f937ad14b8a1f9090eb22 (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (7) authorize { (7) policy filter_username { (7) if (&User-Name) { (7) if (&User-Name) -> TRUE (7) if (&User-Name) { (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@[^@]*@/ ) { (7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # if (&User-Name) = notfound (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 6 length 6 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = eap (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0xe659d40ae35fcd0c (7) eap: Finished EAP session with state 0xe659d40ae35fcd0c (7) eap: Previous EAP request found for state 0xe659d40ae35fcd0c, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: Peer ACKed our handshake fragment. handshake is finished (7) eap_peap: [eaptls verify] = success (7) eap_peap: [eaptls process] = success (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state TUNNEL ESTABLISHED (7) eap: Sending EAP Request (code 1) ID 7 length 40 (7) eap: EAP session adding &reply:State = 0xe659d40ae05ecd0c (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (7) Challenge { ... } # empty sub-section is ignored (7) Sent Access-Challenge Id 32 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (7) EAP-Message = 0x010700281900170303001d4d4faad01230335d580fc3efe048049d1b637f5890b750f4f375c2f3c3 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0xe659d40ae05ecd0cb96e159a7fde31f1 (7) Finished request Waking up in 4.8 seconds. (8) Received Access-Request Id 33 from 192.168.188.45:51338 to 192.168.188.50:1812 length 213 (8) User-Name = "RadiusClient" (8) NAS-IP-Address = 192.168.188.45 (8) NAS-Port = 0 (8) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (8) Calling-Station-Id = "24-41-8C-4E-CA-B9" (8) Framed-MTU = 1400 (8) NAS-Port-Type = Wireless-802.11 (8) Connect-Info = "CONNECT 0Mbps 802.11g" (8) EAP-Message = 0x0207003019001703030025000000000000000161971f111f8a1ecf4ea33b7f85b12f057eeb5544d753657a1b60b551da (8) State = 0xe659d40ae05ecd0cb96e159a7fde31f1 (8) Message-Authenticator = 0xb03adcd7d86944b9bf11c4c024275ef8 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 48 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0xe659d40ae05ecd0c (8) eap: Finished EAP session with state 0xe659d40ae05ecd0c (8) eap: Previous EAP request found for state 0xe659d40ae05ecd0c, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state WAITING FOR INNER IDENTITY (8) eap_peap: Identity - RadiusClient (8) eap_peap: Got inner identity 'RadiusClient' (8) eap_peap: Setting default EAP type for tunneled EAP session (8) eap_peap: Got tunneled request (8) eap_peap: EAP-Message = 0x0207001101526164697573436c69656e74 (8) eap_peap: Setting User-Name to RadiusClient (8) eap_peap: Sending tunneled request to inner-tunnel (8) eap_peap: EAP-Message = 0x0207001101526164697573436c69656e74 (8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (8) eap_peap: User-Name = "RadiusClient" (8) Virtual server inner-tunnel received request (8) EAP-Message = 0x0207001101526164697573436c69656e74 (8) FreeRADIUS-Proxied-To = 127.0.0.1 (8) User-Name = "RadiusClient" (8) WARNING: Outer and inner identities are the same. User privacy is compromised. (8) server inner-tunnel { (8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authorize { (8) policy filter_username { (8) if (&User-Name) { (8) if (&User-Name) -> TRUE (8) if (&User-Name) { (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@[^@]*@/ ) { (8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # if (&User-Name) = notfound (8) } # policy filter_username = notfound (8) [chap] = noop (8) [mschap] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) update control { (8) &Proxy-To-Realm := LOCAL (8) } # update control = noop (8) eap: Peer sent EAP Response (code 2) ID 7 length 17 (8) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = eap (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (8) authenticate { (8) eap: Peer sent packet with method EAP Identity (1) (8) eap: Calling submodule eap_mschapv2 to process data (8) eap_mschapv2: Issuing Challenge (8) eap: Sending EAP Request (code 1) ID 8 length 43 (8) eap: EAP session adding &reply:State = 0xcf2a1cd2cf22064d (8) [eap] = handled (8) } # authenticate = handled (8) } # server inner-tunnel (8) Virtual server sending reply (8) EAP-Message = 0x0108002b1a0108002610d344fa71d94e5f05fa33d30f729a69a5667265657261646975732d332e302e3137 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xcf2a1cd2cf22064d8efcffd481e686b8 (8) eap_peap: Got tunneled reply code 11 (8) eap_peap: EAP-Message = 0x0108002b1a0108002610d344fa71d94e5f05fa33d30f729a69a5667265657261646975732d332e302e3137 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0xcf2a1cd2cf22064d8efcffd481e686b8 (8) eap_peap: Got tunneled reply RADIUS code 11 (8) eap_peap: EAP-Message = 0x0108002b1a0108002610d344fa71d94e5f05fa33d30f729a69a5667265657261646975732d332e302e3137 (8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (8) eap_peap: State = 0xcf2a1cd2cf22064d8efcffd481e686b8 (8) eap_peap: Got tunneled Access-Challenge (8) eap: Sending EAP Request (code 1) ID 8 length 74 (8) eap: EAP session adding &reply:State = 0xe659d40ae151cd0c (8) [eap] = handled (8) } # authenticate = handled (8) Using Post-Auth-Type Challenge (8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (8) Challenge { ... } # empty sub-section is ignored (8) Sent Access-Challenge Id 33 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (8) EAP-Message = 0x0108004a1900170303003f4d4faad01230335eb5f3938ca6c44e60ba930f563d73621c8548d661d155b369d9428a622bc4e70efd5a62dfaa5d823a527b186f1a368ce2e1a209f1ee17b7 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) State = 0xe659d40ae151cd0cb96e159a7fde31f1 (8) Finished request Waking up in 4.8 seconds. (9) Received Access-Request Id 34 from 192.168.188.45:51338 to 192.168.188.50:1812 length 267 (9) User-Name = "RadiusClient" (9) NAS-IP-Address = 192.168.188.45 (9) NAS-Port = 0 (9) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (9) Calling-Station-Id = "24-41-8C-4E-CA-B9" (9) Framed-MTU = 1400 (9) NAS-Port-Type = Wireless-802.11 (9) Connect-Info = "CONNECT 0Mbps 802.11g" (9) EAP-Message = 0x020800661900170303005b0000000000000002d4ba9b84c4a97dce702fff581a06e7b3d63a751a03898dbb43aab86b60edcd52fdbe7d423a070f64506b0ebeabb24d6bd37b12958fc24a16d5597a330b280677d8eac92fe6f661a12d732bc31d72678a7d628e (9) State = 0xe659d40ae151cd0cb96e159a7fde31f1 (9) Message-Authenticator = 0x16f29ab621c814fdb1ec14aac4174d49 (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [preprocess] = ok (9) [chap] = noop (9) [mschap] = noop (9) [digest] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) eap: Peer sent EAP Response (code 2) ID 8 length 102 (9) eap: Continuing tunnel setup (9) [eap] = ok (9) } # authorize = ok (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) authenticate { (9) eap: Expiring EAP session with state 0xcf2a1cd2cf22064d (9) eap: Finished EAP session with state 0xe659d40ae151cd0c (9) eap: Previous EAP request found for state 0xe659d40ae151cd0c, released from the list (9) eap: Peer sent packet with method EAP PEAP (25) (9) eap: Calling submodule eap_peap to process data (9) eap_peap: Continuing EAP-TLS (9) eap_peap: [eaptls verify] = ok (9) eap_peap: Done initial handshake (9) eap_peap: [eaptls process] = ok (9) eap_peap: Session established. Decoding tunneled attributes (9) eap_peap: PEAP state phase2 (9) eap_peap: EAP method MSCHAPv2 (26) (9) eap_peap: Got tunneled request (9) eap_peap: EAP-Message = 0x020800471a0208004231772557c21ef33fd8c95fae2d34609dbd0000000000000000d6abf65ca9c19d341d8f804d94d7ff8d3438e61588879dd100526164697573436c69656e74 (9) eap_peap: Setting User-Name to RadiusClient (9) eap_peap: Sending tunneled request to inner-tunnel (9) eap_peap: EAP-Message = 0x020800471a0208004231772557c21ef33fd8c95fae2d34609dbd0000000000000000d6abf65ca9c19d341d8f804d94d7ff8d3438e61588879dd100526164697573436c69656e74 (9) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (9) eap_peap: User-Name = "RadiusClient" (9) eap_peap: State = 0xcf2a1cd2cf22064d8efcffd481e686b8 (9) Virtual server inner-tunnel received request (9) EAP-Message = 0x020800471a0208004231772557c21ef33fd8c95fae2d34609dbd0000000000000000d6abf65ca9c19d341d8f804d94d7ff8d3438e61588879dd100526164697573436c69656e74 (9) FreeRADIUS-Proxied-To = 127.0.0.1 (9) User-Name = "RadiusClient" (9) State = 0xcf2a1cd2cf22064d8efcffd481e686b8 (9) WARNING: Outer and inner identities are the same. User privacy is compromised. (9) server inner-tunnel { (9) session-state: No cached attributes (9) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) authorize { (9) policy filter_username { (9) if (&User-Name) { (9) if (&User-Name) -> TRUE (9) if (&User-Name) { (9) if (&User-Name =~ / /) { (9) if (&User-Name =~ / /) -> FALSE (9) if (&User-Name =~ /@[^@]*@/ ) { (9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (9) if (&User-Name =~ /\.\./ ) { (9) if (&User-Name =~ /\.\./ ) -> FALSE (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (9) if (&User-Name =~ /\.$/) { (9) if (&User-Name =~ /\.$/) -> FALSE (9) if (&User-Name =~ /@\./) { (9) if (&User-Name =~ /@\./) -> FALSE (9) } # if (&User-Name) = notfound (9) } # policy filter_username = notfound (9) [chap] = noop (9) [mschap] = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) update control { (9) &Proxy-To-Realm := LOCAL (9) } # update control = noop (9) eap: Peer sent EAP Response (code 2) ID 8 length 71 (9) eap: No EAP Start, assuming it's an on-going EAP conversation (9) [eap] = updated (9) [files] = noop rlm_ldap (ldap): Reserved connection (1) (9) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (9) ldap: --> (uid=RadiusClient) (9) ldap: Performing search in "dc=kms,dc=de" with filter "(uid=RadiusClient)", scope "sub" (9) ldap: Waiting for search result... (9) ldap: User object found at DN "uid=RadiusClient,ou=people,dc=kms,dc=de" (9) ldap: EXPAND (&(objectClass=groupOfNames)(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (9) ldap: --> (&(objectClass=groupOfNames)(|(member=uid\3dRadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=RadiusClient))) (9) ldap: Performing search in "dc=kms,dc=de" with filter "(&(objectClass=groupOfNames)(|(member=uid\3dRadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=RadiusClient)))", scope "sub" (9) ldap: Waiting for search result... (9) ldap: Search returned no results (9) ldap: No cacheable group memberships found in group objects (9) ldap: Processing user attributes (9) ldap: control:Password-With-Header += 'bipo5458' rlm_ldap (ldap): Released connection (1) (9) [ldap] = updated (9) [expiration] = noop (9) [logintime] = noop (9) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (9) pap: Removing &control:Password-With-Header (9) pap: WARNING: Auth-Type already set. Not setting to PAP (9) [pap] = noop (9) } # authorize = updated (9) Found Auth-Type = eap (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) authenticate { (9) eap: Expiring EAP session with state 0xcf2a1cd2cf22064d (9) eap: Finished EAP session with state 0xcf2a1cd2cf22064d (9) eap: Previous EAP request found for state 0xcf2a1cd2cf22064d, released from the list (9) eap: Peer sent packet with method EAP MSCHAPv2 (26) (9) eap: Calling submodule eap_mschapv2 to process data (9) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (9) eap_mschapv2: authenticate { (9) mschap: Found Cleartext-Password, hashing to create NT-Password (9) mschap: Found Cleartext-Password, hashing to create LM-Password (9) mschap: Creating challenge hash with username: RadiusClient (9) mschap: Client is using MS-CHAPv2 (9) mschap: Adding MS-CHAPv2 MPPE keys (9) [mschap] = ok (9) } # authenticate = ok (9) MSCHAP Success (9) eap: Sending EAP Request (code 1) ID 9 length 51 (9) eap: EAP session adding &reply:State = 0xcf2a1cd2ce23064d (9) [eap] = handled (9) } # authenticate = handled (9) } # server inner-tunnel (9) Virtual server sending reply (9) EAP-Message = 0x010900331a0308002e533d30314436344636373346343532414536344246424339313335343332324131323336443844463443 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xcf2a1cd2ce23064d8efcffd481e686b8 (9) eap_peap: Got tunneled reply code 11 (9) eap_peap: EAP-Message = 0x010900331a0308002e533d30314436344636373346343532414536344246424339313335343332324131323336443844463443 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: State = 0xcf2a1cd2ce23064d8efcffd481e686b8 (9) eap_peap: Got tunneled reply RADIUS code 11 (9) eap_peap: EAP-Message = 0x010900331a0308002e533d30314436344636373346343532414536344246424339313335343332324131323336443844463443 (9) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (9) eap_peap: State = 0xcf2a1cd2ce23064d8efcffd481e686b8 (9) eap_peap: Got tunneled Access-Challenge (9) eap: Sending EAP Request (code 1) ID 9 length 82 (9) eap: EAP session adding &reply:State = 0xe659d40aee50cd0c (9) [eap] = handled (9) } # authenticate = handled (9) Using Post-Auth-Type Challenge (9) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (9) Challenge { ... } # empty sub-section is ignored (9) Sent Access-Challenge Id 34 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (9) EAP-Message = 0x01090052190017030300474d4faad01230335f0d82ec0b740bbaacd4414767051a21427749c6e20ba3a9efa6004ff4f36e20ade17b3aacfac68b9fb514ee7ad18c2c98a2ee2828a29d708936376bce26eba6 (9) Message-Authenticator = 0x00000000000000000000000000000000 (9) State = 0xe659d40aee50cd0cb96e159a7fde31f1 (9) Finished request Waking up in 4.8 seconds. (10) Received Access-Request Id 35 from 192.168.188.45:51338 to 192.168.188.50:1812 length 202 (10) User-Name = "RadiusClient" (10) NAS-IP-Address = 192.168.188.45 (10) NAS-Port = 0 (10) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (10) Calling-Station-Id = "24-41-8C-4E-CA-B9" (10) Framed-MTU = 1400 (10) NAS-Port-Type = Wireless-802.11 (10) Connect-Info = "CONNECT 0Mbps 802.11g" (10) EAP-Message = 0x020900251900170303001a00000000000000033dc27c9a01fe91438929e869e4e0eb16e690 (10) State = 0xe659d40aee50cd0cb96e159a7fde31f1 (10) Message-Authenticator = 0xf37f65d21fd1ea58044dfc5f309b6836 (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [preprocess] = ok (10) [chap] = noop (10) [mschap] = noop (10) [digest] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) eap: Peer sent EAP Response (code 2) ID 9 length 37 (10) eap: Continuing tunnel setup (10) [eap] = ok (10) } # authorize = ok (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) authenticate { (10) eap: Expiring EAP session with state 0xcf2a1cd2ce23064d (10) eap: Finished EAP session with state 0xe659d40aee50cd0c (10) eap: Previous EAP request found for state 0xe659d40aee50cd0c, released from the list (10) eap: Peer sent packet with method EAP PEAP (25) (10) eap: Calling submodule eap_peap to process data (10) eap_peap: Continuing EAP-TLS (10) eap_peap: [eaptls verify] = ok (10) eap_peap: Done initial handshake (10) eap_peap: [eaptls process] = ok (10) eap_peap: Session established. Decoding tunneled attributes (10) eap_peap: PEAP state phase2 (10) eap_peap: EAP method MSCHAPv2 (26) (10) eap_peap: Got tunneled request (10) eap_peap: EAP-Message = 0x020900061a03 (10) eap_peap: Setting User-Name to RadiusClient (10) eap_peap: Sending tunneled request to inner-tunnel (10) eap_peap: EAP-Message = 0x020900061a03 (10) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (10) eap_peap: User-Name = "RadiusClient" (10) eap_peap: State = 0xcf2a1cd2ce23064d8efcffd481e686b8 (10) Virtual server inner-tunnel received request (10) EAP-Message = 0x020900061a03 (10) FreeRADIUS-Proxied-To = 127.0.0.1 (10) User-Name = "RadiusClient" (10) State = 0xcf2a1cd2ce23064d8efcffd481e686b8 (10) WARNING: Outer and inner identities are the same. User privacy is compromised. (10) server inner-tunnel { (10) session-state: No cached attributes (10) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (10) authorize { (10) policy filter_username { (10) if (&User-Name) { (10) if (&User-Name) -> TRUE (10) if (&User-Name) { (10) if (&User-Name =~ / /) { (10) if (&User-Name =~ / /) -> FALSE (10) if (&User-Name =~ /@[^@]*@/ ) { (10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (10) if (&User-Name =~ /\.\./ ) { (10) if (&User-Name =~ /\.\./ ) -> FALSE (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (10) if (&User-Name =~ /\.$/) { (10) if (&User-Name =~ /\.$/) -> FALSE (10) if (&User-Name =~ /@\./) { (10) if (&User-Name =~ /@\./) -> FALSE (10) } # if (&User-Name) = notfound (10) } # policy filter_username = notfound (10) [chap] = noop (10) [mschap] = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) update control { (10) &Proxy-To-Realm := LOCAL (10) } # update control = noop (10) eap: Peer sent EAP Response (code 2) ID 9 length 6 (10) eap: No EAP Start, assuming it's an on-going EAP conversation (10) [eap] = updated (10) [files] = noop rlm_ldap (ldap): Reserved connection (2) (10) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}}) (10) ldap: --> (uid=RadiusClient) (10) ldap: Performing search in "dc=kms,dc=de" with filter "(uid=RadiusClient)", scope "sub" (10) ldap: Waiting for search result... (10) ldap: User object found at DN "uid=RadiusClient,ou=people,dc=kms,dc=de" (10) ldap: EXPAND (&(objectClass=groupOfNames)(|(member=%{control:Ldap-UserDn})(memberUid=%{%{Stripped-User-Name}:-%{User-Name}}))) (10) ldap: --> (&(objectClass=groupOfNames)(|(member=uid\3dRadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=RadiusClient))) (10) ldap: Performing search in "dc=kms,dc=de" with filter "(&(objectClass=groupOfNames)(|(member=uid\3dRadiusClient\2cou\3dpeople\2cdc\3dkms\2cdc\3dde)(memberUid=RadiusClient)))", scope "sub" (10) ldap: Waiting for search result... (10) ldap: Search returned no results (10) ldap: No cacheable group memberships found in group objects (10) ldap: Processing user attributes (10) ldap: control:Password-With-Header += 'bipo5458' rlm_ldap (ldap): Released connection (2) (10) [ldap] = updated (10) [expiration] = noop (10) [logintime] = noop (10) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password (10) pap: Removing &control:Password-With-Header (10) pap: WARNING: Auth-Type already set. Not setting to PAP (10) [pap] = noop (10) } # authorize = updated (10) Found Auth-Type = eap (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (10) authenticate { (10) eap: Expiring EAP session with state 0xcf2a1cd2ce23064d (10) eap: Finished EAP session with state 0xcf2a1cd2ce23064d (10) eap: Previous EAP request found for state 0xcf2a1cd2ce23064d, released from the list (10) eap: Peer sent packet with method EAP MSCHAPv2 (26) (10) eap: Calling submodule eap_mschapv2 to process data (10) eap: Sending EAP Success (code 3) ID 9 length 4 (10) eap: Freeing handler (10) [eap] = ok (10) } # authenticate = ok (10) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel (10) post-auth { (10) if (0) { (10) if (0) -> FALSE (10) } # post-auth = noop (10) } # server inner-tunnel (10) Virtual server sending reply (10) MS-MPPE-Encryption-Policy = Encryption-Allowed (10) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (10) MS-MPPE-Send-Key = 0x223ce7d0c03fbc3f241798d49a899933 (10) MS-MPPE-Recv-Key = 0xacee8dc5c59ae76abeff913179a4e308 (10) EAP-Message = 0x03090004 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) User-Name = "RadiusClient" (10) eap_peap: Got tunneled reply code 2 (10) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (10) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (10) eap_peap: MS-MPPE-Send-Key = 0x223ce7d0c03fbc3f241798d49a899933 (10) eap_peap: MS-MPPE-Recv-Key = 0xacee8dc5c59ae76abeff913179a4e308 (10) eap_peap: EAP-Message = 0x03090004 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: User-Name = "RadiusClient" (10) eap_peap: Got tunneled reply RADIUS code 2 (10) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (10) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (10) eap_peap: MS-MPPE-Send-Key = 0x223ce7d0c03fbc3f241798d49a899933 (10) eap_peap: MS-MPPE-Recv-Key = 0xacee8dc5c59ae76abeff913179a4e308 (10) eap_peap: EAP-Message = 0x03090004 (10) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (10) eap_peap: User-Name = "RadiusClient" (10) eap_peap: Tunneled authentication was successful (10) eap_peap: SUCCESS (10) eap: Sending EAP Request (code 1) ID 10 length 46 (10) eap: EAP session adding &reply:State = 0xe659d40aef53cd0c (10) [eap] = handled (10) } # authenticate = handled (10) Using Post-Auth-Type Challenge (10) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (10) Challenge { ... } # empty sub-section is ignored (10) Sent Access-Challenge Id 35 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (10) EAP-Message = 0x010a002e190017030300234d4faad012303360e621d49265aefbe228e06c1259d742e6bc8c2e450182e85ebfce70 (10) Message-Authenticator = 0x00000000000000000000000000000000 (10) State = 0xe659d40aef53cd0cb96e159a7fde31f1 (10) Finished request Waking up in 4.8 seconds. (11) Received Access-Request Id 36 from 192.168.188.45:51338 to 192.168.188.50:1812 length 211 (11) User-Name = "RadiusClient" (11) NAS-IP-Address = 192.168.188.45 (11) NAS-Port = 0 (11) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (11) Calling-Station-Id = "24-41-8C-4E-CA-B9" (11) Framed-MTU = 1400 (11) NAS-Port-Type = Wireless-802.11 (11) Connect-Info = "CONNECT 0Mbps 802.11g" (11) EAP-Message = 0x020a002e1900170303002300000000000000048292aee59fad70fa362d1e8b4dd7aa37cfe0eafcaf0bcfa4119a90 (11) State = 0xe659d40aef53cd0cb96e159a7fde31f1 (11) Message-Authenticator = 0xc85cd46d4a932c99894dd31b3fd92f30 (11) session-state: No cached attributes (11) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default (11) authorize { (11) policy filter_username { (11) if (&User-Name) { (11) if (&User-Name) -> TRUE (11) if (&User-Name) { (11) if (&User-Name =~ / /) { (11) if (&User-Name =~ / /) -> FALSE (11) if (&User-Name =~ /@[^@]*@/ ) { (11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (11) if (&User-Name =~ /\.\./ ) { (11) if (&User-Name =~ /\.\./ ) -> FALSE (11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (11) if (&User-Name =~ /\.$/) { (11) if (&User-Name =~ /\.$/) -> FALSE (11) if (&User-Name =~ /@\./) { (11) if (&User-Name =~ /@\./) -> FALSE (11) } # if (&User-Name) = notfound (11) } # policy filter_username = notfound (11) [preprocess] = ok (11) [chap] = noop (11) [mschap] = noop (11) [digest] = noop (11) suffix: Checking for suffix after "@" (11) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (11) suffix: No such realm "NULL" (11) [suffix] = noop (11) eap: Peer sent EAP Response (code 2) ID 10 length 46 (11) eap: Continuing tunnel setup (11) [eap] = ok (11) } # authorize = ok (11) Found Auth-Type = eap (11) # Executing group from file /etc/freeradius/3.0/sites-enabled/default (11) authenticate { (11) eap: Expiring EAP session with state 0xe659d40aef53cd0c (11) eap: Finished EAP session with state 0xe659d40aef53cd0c (11) eap: Previous EAP request found for state 0xe659d40aef53cd0c, released from the list (11) eap: Peer sent packet with method EAP PEAP (25) (11) eap: Calling submodule eap_peap to process data (11) eap_peap: Continuing EAP-TLS (11) eap_peap: [eaptls verify] = ok (11) eap_peap: Done initial handshake (11) eap_peap: [eaptls process] = ok (11) eap_peap: Session established. Decoding tunneled attributes (11) eap_peap: PEAP state send tlv success (11) eap_peap: Received EAP-TLV response (11) eap_peap: Success (11) eap: Sending EAP Success (code 3) ID 10 length 4 (11) eap: Freeing handler (11) [eap] = ok (11) } # authenticate = ok (11) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default (11) post-auth { (11) if ("%{control:LDAP-Group[*]}" =~ /gesperrt/) { (11) EXPAND %{control:LDAP-Group[*]} (11) --> (11) if ("%{control:LDAP-Group[*]}" =~ /gesperrt/) -> FALSE (11) if ("%{control:LDAP-Group[*]}" =~ /schueler/) { (11) EXPAND %{control:LDAP-Group[*]} (11) --> (11) if ("%{control:LDAP-Group[*]}" =~ /schueler/) -> FALSE (11) elsif ("%{control:LDAP-Group[*]}" =~ /lehrer/) { (11) EXPAND %{control:LDAP-Group[*]} (11) --> (11) elsif ("%{control:LDAP-Group[*]}" =~ /lehrer/) -> FALSE (11) elsif ("%{control:LDAP-Group[*]}" =~ /gast/) { (11) EXPAND %{control:LDAP-Group[*]} (11) --> (11) elsif ("%{control:LDAP-Group[*]}" =~ /gast/) -> FALSE (11) elsif (&User-Name == "RadiusClient") { (11) elsif (&User-Name == "RadiusClient") -> TRUE (11) elsif (&User-Name == "RadiusClient") { (11) [noop] = noop (11) } # elsif (&User-Name == "RadiusClient") = noop (11) ... skipping else: Preceding "if" was taken (11) update { (11) No attributes updated (11) } # update = noop (11) [exec] = noop (11) policy remove_reply_message_if_eap { (11) if (&reply:EAP-Message && &reply:Reply-Message) { (11) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (11) else { (11) [noop] = noop (11) } # else = noop (11) } # policy remove_reply_message_if_eap = noop (11) } # post-auth = noop (11) Sent Access-Accept Id 36 from 192.168.188.50:1812 to 192.168.188.45:51338 length 0 (11) MS-MPPE-Recv-Key = 0x0d683b356d5dd677653d826c3a7c4d8e2cf748bae89cd286ea9f690bf631bf25 (11) MS-MPPE-Send-Key = 0x5e3c675c23597c2a8d72748cb4ff619ecb674ba6b3c495f0d76535a66333bbcc (11) EAP-Message = 0x030a0004 (11) Message-Authenticator = 0x00000000000000000000000000000000 (11) User-Name = "RadiusClient" (11) Finished request Waking up in 4.8 seconds. (12) Received Accounting-Request Id 37 from 192.168.188.45:35445 to 192.168.188.50:1813 length 152 (12) Acct-Session-Id = "5E20663C-00000002" (12) Acct-Status-Type = Start (12) Acct-Authentic = RADIUS (12) User-Name = "RadiusClient" (12) NAS-IP-Address = 192.168.188.45 (12) NAS-Port = 0 (12) Called-Station-Id = "88-90-8D-42-55-70:ciscosb" (12) Calling-Station-Id = "24-41-8C-4E-CA-B9" (12) NAS-Port-Type = Wireless-802.11 (12) Connect-Info = "CONNECT 0Mbps 802.11g" (12) # Executing section preacct from file /etc/freeradius/3.0/sites-enabled/default (12) preacct { (12) [preprocess] = ok (12) policy acct_unique { (12) update request { (12) &Tmp-String-9 := "ai:" (12) } # update request = noop (12) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) { (12) EXPAND %{hex:&Class} (12) --> (12) EXPAND ^%{hex:&Tmp-String-9} (12) --> ^61693a (12) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) && ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE (12) else { (12) update request { (12) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (12) --> e5a1723d45ef626bdb7d1000c3e03eda (12) &Acct-Unique-Session-Id := e5a1723d45ef626bdb7d1000c3e03eda (12) } # update request = noop (12) } # else = noop (12) } # policy acct_unique = noop (12) suffix: Checking for suffix after "@" (12) suffix: No '@' in User-Name = "RadiusClient", looking up realm NULL (12) suffix: No such realm "NULL" (12) [suffix] = noop (12) [files] = noop (12) } # preacct = ok (12) # Executing section accounting from file /etc/freeradius/3.0/sites-enabled/default (12) accounting { (12) detail: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d (12) detail: --> /var/log/freeradius/radacct/192.168.188.45/detail-20200115 (12) detail: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/freeradius/radacct/192.168.188.45/detail-20200115 (12) detail: EXPAND %t (12) detail: --> Wed Jan 15 16:17:17 2020 (12) [detail] = ok (12) [unix] = ok (12) [exec] = noop (12) attr_filter.accounting_response: EXPAND %{User-Name} (12) attr_filter.accounting_response: --> RadiusClient (12) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (12) [attr_filter.accounting_response] = updated (12) } # accounting = updated (12) Sent Accounting-Response Id 37 from 192.168.188.50:1813 to 192.168.188.45:35445 length 0 (12) Finished request (12) Cleaning up request packet ID 37 with timestamp +7 Waking up in 4.8 seconds. (1) Cleaning up request packet ID 26 with timestamp +7 (2) Cleaning up request packet ID 27 with timestamp +7 (3) Cleaning up request packet ID 28 with timestamp +7 (4) Cleaning up request packet ID 29 with timestamp +7 (5) Cleaning up request packet ID 30 with timestamp +7 (6) Cleaning up request packet ID 31 with timestamp +7 (7) Cleaning up request packet ID 32 with timestamp +7 (8) Cleaning up request packet ID 33 with timestamp +7 (9) Cleaning up request packet ID 34 with timestamp +7 (10) Cleaning up request packet ID 35 with timestamp +7 (11) Cleaning up request packet ID 36 with timestamp +7 Ready to process requests Am 14.01.2020 22:45 schrieb Alan DeKok:
On Jan 14, 2020, at 2:43 PM, uj2.hahn@posteo.de wrote:
While I'm still struggling with my issue I read documentation again and again, especially about the cert documents. Now I'm so confused that I like to come back to some basic questions:
raddb/certs/README says:
$ vi client.cnf
Edit the "input_password" and "output_password" fields to be the password for the client certificate. You will have to give these passwords to the end user who will be using the certificates.
and later: $ make client.pem
The users certificate will be in "emailAddress.pem", i.e. "user@example.com.pem".
The bootstrap script is indeed creating this email-like certificate. But when I install it on the client PC there is no password needed (but installation is successfull).
Yes, a certificate doesn't need a signature.
But in addition the bootstrap script generates 5 more client files (client.pem, client.key etc.). When I install those I'm asked for the password (as expected). So: what is the correct file to load into the PC as client cert for EAP-TLS?
The client certificate, and the client key. The certificate has various forms (PEM, CRT, etc.). You only need one.
And one more question:
raddb/certs/README says:
MAKING A SERVER CERTIFICATE
The following steps will let you create a server certificate for use with TLS-based EAP methods, such as EAP-TLS, PEAP, and TTLS. Follow similar steps to create an "inner-server.pem" file, for use with EAP-TLS that is tunneled inside of another TLS-based EAP method.
The bootstrap script does not care about this inner-server.cfg config file and does not generate inner-server.pem. Is it correct? The Makefile does have an entry for that but this is not used by the bootstrap file. Is it on intention?
Yes. The inner-server certificate is used for mods-available/inner-eap. If you don't use that module, then the inner-server certificate isn't necessary.
Alan DeKok.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
On Jan 16, 2020, at 9:05 AM, uj2.hahn@posteo.de wrote:
Hi! I think I got it to work!!
That's good. For the benefit of others reading this, what was wrong?
To refresh the memory: Radius based WLAN access control in a school for students and teachers. But there are some school-owned Win 10 tablets which should be able to login automatically via Radius client certificates. It seems it is working now! Thanks for your great support!
Good to hear.
Can you guys do me the favor to confirm that everything is going right with the certs (see debug file below)?
If there's an Access-Accept and the system gets on WiFi, it's OK. Nothing else matters.
Once you confirm, then I have a new question: We use a Captive Portal connected to the freeradius server. This is fine to let user accept terms and conditions etc. But for the special user behind the client certificate ("RadiusClient") we don't want to see this Captive Portal web site. Is there anything freeradius can do or is it purely a CP configuration thing?
You need to bypass the captive portal completely. It has nothing to do with FreeRADIUS. Typically you have a "closed" SSID which requires EAP / certificates. Then, you have an "open" SSID which is controlled by the captive portal. You can't mix & match EAP and captive portals. The protocols are designed to make this impossible. Alan DeKok.
Hi, Alan and all!
On 16.01.2020 15:32, Alan DeKok wrote:
> On Jan 16, 2020, at 9:05 AM, uj2.hahn@posteo.de wrote:
>> Hi!
>> I think I got it to work!!
> That's good. For the benefit of others reading this, what was wrong?
I tried so many things on Win 10 side and regenerated so many certs on
freeradius side
that I finally lost the overview :-)
So I cannot say which detail made the deal.
However, this is what I did:
- install CA certificate on PC
- install client certificate on PC ( the one which looks like an
email..., remember the common-name
because this is the username which will be used for your radius
authorization)
- now create a WLAN profile for this which confused me most because it
is a pain on Win 10!
Properties for wireless networks: (I translate that from my German
PC, so the correct English
wording might be slightly different):
Security settings:
> Security type: WPA2-Enterprise
> Encryption type: AES
> Method for network authentification: Microsoft: Secured EAP (PEAP)
-> Settings:
- check server by certificate
- authentification method: secured password (EAP-MSCHAP v2)
* Setting: disable usage of own Win credentials
- enable fast recovery of connection (the other check boxes
are not enabled)
> Advanced settings:
-> authentification mode: User authentification
I currently use freeradius with LDAP on OpenLDAP. Here I had to add a
user which is the
same as the common-name in my client certificate above.
At the very end it is not soooooo complicated (as everything you finally
understood). But
the learning cycle was long.
>
>> To refresh the memory: Radius based WLAN access control in a school for students and teachers. But there
>> are some school-owned Win 10 tablets which should be able to login automatically via Radius client certificates.
>> It seems it is working now! Thanks for your great support!
> Good to hear.
>
>> Can you guys do me the favor to confirm that everything is going right with the certs (see debug file below)?
> If there's an Access-Accept and the system gets on WiFi, it's OK. Nothing else matters.
>
>> Once you confirm, then I have a new question:
>> We use a Captive Portal connected to the freeradius server. This is fine to let user accept terms and conditions etc.
>> But for the special user behind the client certificate ("RadiusClient") we don't want to see this Captive Portal web site.
>> Is there anything freeradius can do or is it purely a CP configuration thing?
> You need to bypass the captive portal completely. It has nothing to do with FreeRADIUS.
>
> Typically you have a "closed" SSID which requires EAP / certificates. Then, you have an "open" SSID which is controlled by the captive portal. You can't mix & match EAP and captive portals. The protocols are designed to make this impossible.
>
> Alan DeKok.
Yes, I expected that answer and configured the CP already exactly as you
proposed.
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
participants (3)
-
Alan DeKok -
Gregory Sloop -
uj2.hahn＠posteo.de