Hi all. I have problem with EAP-TLS. Computer with OS Windows Vista, Freeradius 1.1.3. Immediately access to the network exists after connection, but access is forbidden through several minutes. This is what it is obtained: [root@localhost ~]# radiusd -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: snmp = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = yes main: log_file = "/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = yes main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "yes" main: lower_pass = "yes" main: nospace_user = "yes" main: nospace_pass = "yes" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = yes mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = yes unix: passwd = "/etc/passwd" unix: shadow = "/etc/raddb/shadow" unix: group = "/etc/group" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 HASH: Reinitializing hash structures and lists for caching... HASH: user root found in hashtable bucket 11726 HASH: user bin found in hashtable bucket 86651 HASH: user daemon found in hashtable bucket 11668 HASH: user adm found in hashtable bucket 26466 HASH: user lp found in hashtable bucket 54068 HASH: user sync found in hashtable bucket 42895 HASH: user shutdown found in hashtable bucket 71746 HASH: user halt found in hashtable bucket 7481 HASH: user mail found in hashtable bucket 79471 HASH: user news found in hashtable bucket 5375 HASH: user uucp found in hashtable bucket 38541 HASH: user operator found in hashtable bucket 21748 HASH: user games found in hashtable bucket 47657 HASH: user gopher found in hashtable bucket 47357 HASH: user ftp found in hashtable bucket 56226 HASH: user nobody found in hashtable bucket 99723 HASH: user rpm found in hashtable bucket 72383 HASH: user dbus found in hashtable bucket 68880 HASH: user avahi found in hashtable bucket 41645 HASH: user mailnull found in hashtable bucket 78086 HASH: user smmsp found in hashtable bucket 13600 HASH: user nscd found in hashtable bucket 36306 HASH: user vcsa found in hashtable bucket 25959 HASH: user rpc found in hashtable bucket 72373 HASH: user rpcuser found in hashtable bucket 552 HASH: user nfsnobody found in hashtable bucket 51830 HASH: user sshd found in hashtable bucket 71560 HASH: user pcap found in hashtable bucket 55326 HASH: user ntp found in hashtable bucket 21418 HASH: user haldaemon found in hashtable bucket 31187 HASH: user apache found in hashtable bucket 26582 HASH: user xfs found in hashtable bucket 17213 HASH: user gdm found in hashtable bucket 50360 HASH: user sabayon found in hashtable bucket 36231 HASH: user ldap found in hashtable bucket 45563 HASH: user radiusd found in hashtable bucket 55046 HASH: user admin found in hashtable bucket 45083 HASH: Stored 37 entries from /etc/passwd HASH: Stored 48 entries from /etc/group Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "tls" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/etc/raddb/certs/dh" tls: random_file = "/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = yes peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded realm realm: format = "prefix" realm: delimiter = "\" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (ntdomain) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" [/etc/raddb/users]:216 WARNING! Changing 'Service-Type =' to 'Service-Type ==' ?for comparing RADIUS attribute in check item list for user admin Module: Instantiated files (files) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.0.1.2:5007, id=131, length=214 User-Name = "test_user" EAP-Message = 0x0202000e01746573745f75736572 Message-Authenticator = 0x1b8586c086b1949ff4ff4e65e2ab0e39 NAS-IP-Address = 10.0.1.2 NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0013-7737-714e" Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-255 = 0x353530302d4549 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Vendor-25506-Attr-59 = 0x38e68c68 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '\' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 14 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Requiring client certificate rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 131 to 10.0.1.2 port 5007 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x010300060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6f48fa08e12249461e835c0b48f47811 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.1.2:5007, id=132, length=370 User-Name = "test_user" EAP-Message = 0x020300980d800000008e160301008901000085030148e33398cf612643dce87d17a75835909854655784d5fead9921013a69cd25e42042eae5e7218a3b678c826a0e8a907dd49e396e89b267dd63632257ac1bfe4a060018002f00350005000ac009c00ac013c0140032003800130004010000240000000e000c000009746573745f75736572000a00080006001700180019000b00020100 Message-Authenticator = 0x7fe5df0cc3def44f72f4e49d1507e300 NAS-IP-Address = 10.0.1.2 NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0013-7737-714e" State = 0x6f48fa08e12249461e835c0b48f47811 Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-255 = 0x353530302d4549 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Vendor-25506-Attr-59 = 0x38e68c68 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '\' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 1 rlm_eap: EAP packet type response id 3 length 152 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0089], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 056e], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0074], CertificateRequest TLS_accept: SSLv3 write certificate request A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 132 to 10.0.1.2 port 5007 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 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 EAP-Message = 0x170d3039313030313037343430315a305c310b3009060355040613025541311330110603550408130a5a61706f726f7a736865310b3009060355040713025a50310c300a060355040a13035a415a310c300a060355040b13034d4953310f300d0603550403130652414449555330819f300d06092a864886f70d010101050003818d0030818902818100ac35b8809afa0040f3ebc0af9fb56e2a4196f58fe6aee43df306d38e27a8d3da043dfffa300bf8e4b851e88612e6ddce19aaf601912a9a0cb400d736cef53ffdc07950598741653bd839b24e80399c02eaaa48627241d20b20be2df7311ce3b9f7524ffcb03045bcc56d3a0de7d3c382720512 EAP-Message = 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 EAP-Message = 0x550408130a5a61706f726f7a736845310b3009060355040713025a50310c300a060355040a13035a415a310c300a060355040b13034d4953311630140603550403130d41646d696e6973747261746f72301e170d3038313030313037343330345a170d3130313030313037343330345a3063310b3009060355040613025541311330110603550408130a5a61706f726f7a736845310b3009060355040713025a50310c300a060355040a13035a415a310c300a060355040b13034d4953311630140603550403130d41646d696e6973747261746f7230819f300d06092a864886f70d010101050003818d00308189028181009b2e0773ff8310e98addfa EAP-Message = 0xb3458c421c935ca651f8f7ca3899d6506d065de4f53f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x4f8a9e9171ee9029400f09a30bcafb04 Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.0.1.2:5007, id=133, length=224 User-Name = "test_user" EAP-Message = 0x020400060d00 Message-Authenticator = 0xfaef652a40d7640a666f521121c2ea8e NAS-IP-Address = 10.0.1.2 NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0013-7737-714e" State = 0x4f8a9e9171ee9029400f09a30bcafb04 Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-255 = 0x353530302d4549 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Vendor-25506-Attr-59 = 0x38e68c68 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '\' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 2 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 133 to 10.0.1.2 port 5007 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x726f7a736845310b3009060355040713025a50310c300a060355040a13035a415a310c300a060355040b13034d4953311630140603550403130d41646d696e6973747261746f720e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x15b748aa79357a594a6d17dceec16660 Finished request 2 Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.0.1.2:5007, id=134, length=1176 User-Name = "test_user" EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x0f000082008046823bbd7856b23283fbb758c31045b36c2fae082e316d785b8d6b1d5e754ae174af07c33267c4388094d6461a014b399566dd1e940797d9f3d1b05dd00f8bc4118897d9a286147ab2a393dcfd24c05ac82b045f425e326a2963b78fdee8c43839c36a0bef78583c3811130112ccf0526f0b5020404e2676b24ad22e986f007f1403010001011603010030da4c514cf7620cac74dfb42acc280cffc02da4cc9fead307c762cafb0bc6c70bd80d9ec997a26dc9621a41a04ef6edcc Message-Authenticator = 0xd4511e3fe67c6f5460d17e37b0013f71 NAS-IP-Address = 10.0.1.2 NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0013-7737-714e" State = 0x15b748aa79357a594a6d17dceec16660 Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-255 = 0x353530302d4549 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Vendor-25506-Attr-59 = 0x38e68c68 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '\' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 3 rlm_eap: EAP packet type response id 5 length 253 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0262], Certificate chain-depth=1, error=0 --> User-Name = test_user --> BUF-Name = Administrator --> subject = /C=UA/ST=ZaporozshE/L=ZP/O=ZAZ/OU=MIS/CN=Administrator --> issuer = /C=UA/ST=ZaporozshE/L=ZP/O=ZAZ/OU=MIS/CN=Administrator --> verify return:1 chain-depth=0, error=0 --> User-Name = test_user --> BUF-Name = test_user --> subject = /C=UA/ST=Zaporozshe/L=ZP/O=Company/OU=Unit/CN=test_user --> issuer = /C=UA/ST=ZaporozshE/L=ZP/O=ZAZ/OU=MIS/CN=Administrator --> verify return:1 TLS_accept: SSLv3 read client certificate A rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], CertificateVerify TLS_accept: SSLv3 read certificate verify A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) SSL Connection Established eaptls_process returned 13 modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 134 to 10.0.1.2 port 5007 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x010600450d800000003b140301000101160301003039b2085806fae2cc780147a6c5c6a148de142f57587022933ce20d28289c9c5b9c8d9177e937c4c617ea2f144cfcf594 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x772d4b5734ef3903668f83b084b488c6 Finished request 3 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.0.1.2:5007, id=135, length=224 User-Name = "test_user" EAP-Message = 0x020600060d00 Message-Authenticator = 0xaf008159785a235658836c3e69ad6ff9 NAS-IP-Address = 10.0.1.2 NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0013-7737-714e" State = 0x772d4b5734ef3903668f83b084b488c6 Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-255 = 0x353530302d4549 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Vendor-25506-Attr-59 = 0x38e68c68 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '\' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "ntdomain" returns noop for request 4 rlm_eap: EAP packet type response id 6 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/tls rlm_eap: processing type tls rlm_eap_tls: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns ok for request 4 modcall: leaving group authenticate (returns ok) for request 4 Login OK: [test_user/<no User-Password attribute>] (from client 10.0.1.2 port 117604353 cli 0013-7737-714e) Sending Access-Accept of id 135 to 10.0.1.2 port 5007 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP MS-MPPE-Recv-Key = 0xd9f6096ed691dd5ff7ca9ef552bb6ecb2721522c0cea2a8a60b2a15028dd0f1b MS-MPPE-Send-Key = 0x984eb1cab0d9e759150b5294ead73e691bf647a7d61203f39e2c0d8b78272892 EAP-Message = 0x03060004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "test_user" Finished request 4 Going to the next request Waking up in 5 seconds... rad_recv: Accounting-Request packet from host 10.0.1.2:5007, id=59, length=217 User-Name = "test_user" NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Calling-Station-Id = "0013-7737-714e" Acct-Status-Type = Start Acct-Authentic = RADIUS Acct-Session-Id = "71000302014213" NAS-IP-Address = 10.0.1.2 Event-Timestamp = "Apr 2 2000 04:42:45 EEST" Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-1 = 0x00000000 Vendor-25506-Attr-2 = 0x00000000 Vendor-25506-Attr-4 = 0x00000000 Vendor-25506-Attr-5 = 0x00000000 Vendor-25506-Attr-22 = 0x00000000 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 5 modcall[preacct]: module "preprocess" returns noop for request 5 rlm_acct_unique: Hashing 'NAS-Port = 117604353,Client-IP-Address = 10.0.1.2,NAS-IP-Address = 10.0.1.2,Acct-Session-Id = "71000302014213",User-Name = "test_user"' rlm_acct_unique: Acct-Unique-Session-ID = "d6ce50f8bbb692bc". modcall[preacct]: module "acct_unique" returns ok for request 5 rlm_realm: No '@' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 5 modcall[preacct]: module "files" returns noop for request 5 modcall: leaving group preacct (returns ok) for request 5 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 5 radius_xlat: '/var/log/radius/radacct/10.0.1.2/detail-20081001' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/10.0.1.2/detail-20081001 modcall[accounting]: module "detail" returns ok for request 5 modcall[accounting]: module "unix" returns ok for request 5 radius_xlat: '/var/log/radius/radutmp' radius_xlat: 'test_user' modcall[accounting]: module "radutmp" returns ok for request 5 modcall: leaving group accounting (returns ok) for request 5 Sending Accounting-Response of id 59 to 10.0.1.2 port 5007 Finished request 5 Going to the next request Cleaning up request 5 ID 59 with timestamp 48e33558 Waking up in 5 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 131 with timestamp 48e33557 Cleaning up request 1 ID 132 with timestamp 48e33557 Waking up in 1 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 133 with timestamp 48e33558 Cleaning up request 3 ID 134 with timestamp 48e33558 Cleaning up request 4 ID 135 with timestamp 48e33558 Nothing to do. Sleeping until we see a request. rad_recv: Accounting-Request packet from host 10.0.1.2:5007, id=60, length=265 User-Name = "test_user" NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Calling-Station-Id = "0013-7737-714e" Acct-Status-Type = Interim-Update Acct-Authentic = RADIUS Acct-Session-Id = "71000302014213" NAS-IP-Address = 10.0.1.2 Event-Timestamp = "Apr 2 2000 04:43:44 EEST" Acct-Session-Time = 59 Acct-Delay-Time = 1 Acct-Input-Octets = 16693 Acct-Input-Packets = 147 Acct-Output-Octets = 14624 Acct-Output-Packets = 162 Acct-Input-Gigawords = 0 Acct-Output-Gigawords = 0 Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-1 = 0x00000000 Vendor-25506-Attr-2 = 0x00000000 Vendor-25506-Attr-4 = 0x00000000 Vendor-25506-Attr-5 = 0x00000000 Vendor-25506-Attr-22 = 0x00000000 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 6 modcall[preacct]: module "preprocess" returns noop for request 6 rlm_acct_unique: Hashing 'NAS-Port = 117604353,Client-IP-Address = 10.0.1.2,NAS-IP-Address = 10.0.1.2,Acct-Session-Id = "71000302014213",User-Name = "test_user"' rlm_acct_unique: Acct-Unique-Session-ID = "d6ce50f8bbb692bc". modcall[preacct]: module "acct_unique" returns ok for request 6 rlm_realm: No '@' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 6 modcall[preacct]: module "files" returns noop for request 6 modcall: leaving group preacct (returns ok) for request 6 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 6 radius_xlat: '/var/log/radius/radacct/10.0.1.2/detail-20081001' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/10.0.1.2/detail-20081001 modcall[accounting]: module "detail" returns ok for request 6 modcall[accounting]: module "unix" returns noop for request 6 radius_xlat: '/var/log/radius/radutmp' radius_xlat: 'test_user' modcall[accounting]: module "radutmp" returns ok for request 6 modcall: leaving group accounting (returns ok) for request 6 Sending Accounting-Response of id 60 to 10.0.1.2 port 5007 Finished request 6 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 6 ID 60 with timestamp 48e33593 Nothing to do. Sleeping until we see a request. rad_recv: Accounting-Request packet from host 10.0.1.2:5007, id=61, length=271 User-Name = "test_user" NAS-Identifier = "001ac1d4ee42" NAS-Port = 117604353 NAS-Port-Id = "unit=7;subslot=0;port=40;vlanid=1" NAS-Port-Type = Ethernet Calling-Station-Id = "0013-7737-714e" Acct-Status-Type = Stop Acct-Authentic = RADIUS Acct-Session-Id = "71000302014213" NAS-IP-Address = 10.0.1.2 Event-Timestamp = "Apr 2 2000 04:44:45 EEST" Acct-Session-Time = 120 Acct-Delay-Time = 0 Acct-Input-Octets = 23022 Acct-Input-Packets = 219 Acct-Output-Octets = 27604 Acct-Output-Packets = 322 Acct-Input-Gigawords = 0 Acct-Output-Gigawords = 0 Acct-Terminate-Cause = Lost-Carrier Vendor-25506-Attr-26 = 0x00000029 Vendor-25506-Attr-1 = 0x00000000 Vendor-25506-Attr-2 = 0x00000000 Vendor-25506-Attr-4 = 0x00000000 Vendor-25506-Attr-5 = 0x00000000 Vendor-25506-Attr-22 = 0x00000000 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31333a37373a33373a37313a3465 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 7 modcall[preacct]: module "preprocess" returns noop for request 7 rlm_acct_unique: Hashing 'NAS-Port = 117604353,Client-IP-Address = 10.0.1.2,NAS-IP-Address = 10.0.1.2,Acct-Session-Id = "71000302014213",User-Name = "test_user"' rlm_acct_unique: Acct-Unique-Session-ID = "d6ce50f8bbb692bc". modcall[preacct]: module "acct_unique" returns ok for request 7 rlm_realm: No '@' in User-Name = "test_user", looking up realm NULL rlm_realm: No such realm "NULL" modcall[preacct]: module "suffix" returns noop for request 7 modcall[preacct]: module "files" returns noop for request 7 modcall: leaving group preacct (returns ok) for request 7 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 7 radius_xlat: '/var/log/radius/radacct/10.0.1.2/detail-20081001' rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /var/log/radius/radacct/10.0.1.2/detail-20081001 modcall[accounting]: module "detail" returns ok for request 7 modcall[accounting]: module "unix" returns ok for request 7 radius_xlat: '/var/log/radius/radutmp' radius_xlat: 'test_user' modcall[accounting]: module "radutmp" returns ok for request 7 modcall: leaving group accounting (returns ok) for request 7 Sending Accounting-Response of id 61 to 10.0.1.2 port 5007 Finished request 7 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 7 ID 61 with timestamp 48e335d0 Nothing to do. Sleeping until we see a request.
Radius is working fine. Your problem is with NAS: ..
rad_recv: Accounting-Request packet from host 10.0.1.2:5007, id=61, length=271 .. Acct-Status-Type = Stop .. Acct-Session-Time = 120 .. Acct-Terminate-Cause = Lost-Carrier ..
Connection breaks after two minutes. Debug NAS to see why. NAS is sending some VSAs - does it expect any back? That MTU looks a bit low. Is it supported by the NAS? Ivan Kalik Kalik Informatika ISP
Guk Victor wrote:
Hi all.
I have problem with EAP-TLS. Computer with OS Windows Vista, Freeradius 1.1.3. Immediately access to the network exists after connection, but access is forbidden through several minutes. This is what it is obtained:
Well. I had very similar issue. If your NAS is 3com - check out this post. http://lists.freeradius.org/mailman/htdig/freeradius-users/2008-July/msg0056... Kind regards, -- Lech Karol Pawłaszek <ike> "You will never see me fall from grace" [KoRn]
participants (3)
-
Guk Victor -
Lech Karol Pawłaszek -
tnt＠kalik.net