Hi, having a new voip pbx (OmniPCX Enterprise 9.0) from Alcatel-Lucent, I now try to setup 802.1x with the phones, an Alcatel-Lucent IP Touch 4028 EE. Freeradius is 2.x on a Debian 5.0. My first attempt was with MD5, which works without any problem. Next step is TLS, which works at 50%. Well, the client authentication of TLS works, but when I configure to do a server authentication within the IP phone´s setup, it fails. So, here is the output from radiusd -Xf when server authentication is not added within the IP phone´s setup: ============================================================= FreeRADIUS Version 2.1.6, for host i686-pc-linux-gnu, built on May 29 2009 at 15:54:08 Copyright (C) 1999-2009 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/modules/ including configuration file /etc/raddb/modules/radutmp including configuration file /etc/raddb/modules/pap including configuration file /etc/raddb/modules/attr_rewrite including configuration file /etc/raddb/modules/perl including configuration file /etc/raddb/modules/expr including configuration file /etc/raddb/modules/smbpasswd including configuration file /etc/raddb/modules/otp including configuration file /etc/raddb/modules/acct_unique including configuration file /etc/raddb/modules/chap including configuration file /etc/raddb/modules/krb5 including configuration file /etc/raddb/modules/files including configuration file /etc/raddb/modules/policy including configuration file /etc/raddb/modules/wimax including configuration file /etc/raddb/modules/ldap including configuration file /etc/raddb/modules/realm including configuration file /etc/raddb/modules/mschap including configuration file /etc/raddb/modules/linelog including configuration file /etc/raddb/modules/sql_log including configuration file /etc/raddb/modules/detail including configuration file /etc/raddb/modules/digest including configuration file /etc/raddb/modules/mac2vlan including configuration file /etc/raddb/modules/expiration including configuration file /etc/raddb/modules/echo including configuration file /etc/raddb/modules/detail.example.com including configuration file /etc/raddb/modules/counter including configuration file /etc/raddb/modules/attr_filter including configuration file /etc/raddb/modules/sradutmp including configuration file /etc/raddb/modules/pam including configuration file /etc/raddb/modules/inner-eap including configuration file /etc/raddb/modules/smsotp including configuration file /etc/raddb/modules/passwd including configuration file /etc/raddb/modules/ippool including configuration file /etc/raddb/modules/logintime including configuration file /etc/raddb/modules/always including configuration file /etc/raddb/modules/preprocess including configuration file /etc/raddb/modules/sqlcounter_expire_on_login including configuration file /etc/raddb/modules/exec including configuration file /etc/raddb/modules/unix including configuration file /etc/raddb/modules/etc_group including configuration file /etc/raddb/modules/mac2ip including configuration file /etc/raddb/modules/checkval including configuration file /etc/raddb/modules/detail.log including configuration file /etc/raddb/eap.conf including configuration file /etc/raddb/policy.conf including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/inner-tunnel including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/control-socket including dictionary file /etc/raddb/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 require_message_authenticator = no zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 irt = 2 mrt = 16 mrc = 5 mrd = 30 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } client 192.168.10.130 { require_message_authenticator = no secret = "password" shortname = "Switch1" } client 192.168.10.131 { require_message_authenticator = no secret = "password" shortname = "Switch2" } client 192.168.104.244 { require_message_authenticator = no secret = "password" shortname = "Switch3" } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = no input_pairs = "request" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/radius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "tls" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Module: Linked to sub-module rlm_eap_tls Module: Instantiating eap-tls tls { rsa_key_exchange = yes dh_key_exchange = yes rsa_key_length = 2048 dh_key_length = 512 verify_depth = 0 pem_file_type = yes private_key_file = "/etc/raddb/certs/server.key" certificate_file = "/etc/raddb/certs/server.crt" CA_file = "/etc/raddb/certs/ca.crt" private_key_password = "password" dh_file = "/etc/raddb/certs/dh" random_file = "/etc/raddb/certs/random" fragment_size = 1024 include_length = yes check_crl = no cipher_list = "DEFAULT" make_cert_command = "/etc/raddb/certs/bootstrap" cache { enable = no lifetime = 24 max_entries = 255 } } Module: Linked to sub-module rlm_eap_ttls Module: Instantiating eap-ttls ttls { default_eap_type = "md5" copy_request_to_tunnel = yes use_tunneled_reply = yes virtual_server = "inner-tunnel" include_length = yes } Module: Linked to sub-module rlm_eap_peap Module: Instantiating eap-peap peap { default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" } Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/raddb/users" acctusersfile = "/etc/raddb/acct_users" preproxy_usersfile = "/etc/raddb/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/raddb/attrs.access_reject" key = "%{User-Name}" } } # modules } # server server { modules { Module: Checking authenticate {...} for more modules to load Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/raddb/huntgroups" hints = "/etc/raddb/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Linked to module rlm_acct_unique Module: Instantiating acct_unique acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } Module: Checking accounting {...} for more modules to load Module: Linked to module rlm_detail Module: Instantiating detail detail { detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" header = "%t" detailperm = 384 dirperm = 493 locking = no log_packet_header = no } Module: Instantiating attr_filter.accounting_response attr_filter attr_filter.accounting_response { attrsfile = "/etc/raddb/attrs.accounting_response" key = "%{User-Name}" } Module: Checking session {...} for more modules to load Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load } # modules } # server radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } listen { type = "control" listen { socket = "/var/run/radiusd/radiusd.sock" } } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on command file /var/run/radiusd/radiusd.sock Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=127, length=336 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" EAP-Message = 0x0244001101303038303966383538633137 Message-Authenticator = 0x26f23798cfc04abb83fa87d210d1bc69 MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 68 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 127 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x014500060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa863225aa8262fa7eff5a1519b312199 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=128, length=437 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" State = 0xa863225aa8262fa7eff5a1519b312199 EAP-Message = 0x024500640d800000005a160301005501000051030100000000029c3cefd84c43ff0fdd96f2139986e55316e45f34fe5e36a3caa07f00002a00660065006400630062006100600015001400120011000900080006000500040003001a0019001800170100 Message-Authenticator = 0xca28b57e66136938c479c4f7c87ca2b9 MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 69 length 100 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 90 [tls] Length Included [tls] eaptls_verify returned 11 [tls] (other): before/accept initialization [tls] TLS_accept: before/accept initialization [tls] <<< TLS 1.0 Handshake [length 0055], ClientHello [tls] TLS_accept: SSLv3 read client hello A [tls] >>> TLS 1.0 Handshake [length 002a], ServerHello [tls] TLS_accept: SSLv3 write server hello A [tls] >>> TLS 1.0 Handshake [length 03e2], Certificate [tls] TLS_accept: SSLv3 write certificate A [tls] >>> TLS 1.0 Handshake [length 00c2], CertificateRequest [tls] TLS_accept: SSLv3 write certificate request A [tls] TLS_accept: SSLv3 flush data [tls] TLS_accept: Need to read more data: SSLv3 read client certificate A In SSL Handshake Phase In SSL Accept mode [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 128 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xcad3317d8cf0cd4ebdc62a92d3a5a4410203010001300d06092a864886f70d010105050003820101008b4b93d819eac0c24d526cff8f76dbfd7da85921a4c96d7394eb33b2c660de21961039fe54b96b9f708711fe658df81616db866aed2ed9ec4b42a6e0b54f33c129e92421926cba6674b2611e14081cadd9b6a8401c082ef12a84d33bd4c08fafeeadb98dc182b597d173d36b2556bae344eefa8ea24c703f3568001716188eee3c920092204fb530ffa2e6de64f18c929c4e351f84ec80120001ab08be1b0863a1866d8ce8a3561ec6a08e421e386e9015234829c87b64f1ba6b0a5c1302b3e80a735db35c696c37940eedf1fe240ea7773eb35d EAP-Message = 0x710afb0e1495d38c42da7dd3 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa863225aa9252fa7eff5a1519b312199 Finished request 1. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=129, length=343 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" State = 0xa863225aa9252fa7eff5a1519b312199 EAP-Message = 0x024600060d00 Message-Authenticator = 0x5a31886be829f7fe67e6f24f7d17cd3f MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 70 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake fragment handler [tls] eaptls_verify returned 1 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 129 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x014700f10d80000004dd8a8ab4bce56d175b1c0969bdd410271ff5999d0d1d3fb011bdfbe4504764c0b116030100c20d0000ba0301024000b400b23081af310b30090603550406130244453110300e0603550407130742616d62657267312c302a060355040a13234f74746f2d4672696564726963682d556e697665727369746165742042616d6265726731163014060355040b130d52656368656e7a656e7472756d311c301a060355040313134b6f6d6d756e696b6174696f6e736e65747a65312a302806092a864886f70d010901161b6e65747a2d7365727669636540756e692d62616d626572672e64650e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa863225aaa242fa7eff5a1519b312199 Finished request 2. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=130, length=1657 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" State = 0xa863225aaa242fa7eff5a1519b312199 EAP-Message = 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 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0xbda30284026bf82bd4b7302ada1f7db843beb15748b09d57d3d160756aafaeb9ebdc2cd1897bab69f4315e3a66d7141070cbf17d3d4a536844742e7d07076409c6455c6ed6f3ad38ead74e050e8cc01b4fc67c0c47400a6bf3ca648f586487f8be1e29ce6964759c17c0d479c983adb53017f797782ff9c7beabde8c56a66d7ead135254646856150954c16e393753af575376185f438694b1d31d41f59f284488fc933aa47445908197ab17b1e85e0043b9bf263ad25e1dc33c87a1864adce038c63f571cb212f24a1c1d5b6331b2a7def9b54b9ecce69c2cace0d6ca651f9c48c61603010106100001020100817df4135e744b8d13a99590deaa677d EAP-Message = 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 EAP-Message = 0xafb637c54c0f2af5ce0b900abaa00583a06ef6f041d6bdd639497450a2f527e4a0b53e41ee93ef1311eab231c6 Message-Authenticator = 0xa32aab76eea9d3033e8ea581033ddf23 MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 71 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS TLS Length 1560 [tls] Received EAP-TLS First Fragment of the message [tls] eaptls_verify returned 9 [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 130 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x014800060d00 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa863225aab2b2fa7eff5a1519b312199 Finished request 3. Going to the next request Waking up in 3.7 seconds. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=131, length=605 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" State = 0xa863225aab2b2fa7eff5a1519b312199 EAP-Message = 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 EAP-Message = 0x14e12d8625cc5ce37e5e548243 Message-Authenticator = 0x5d76a81c99d9ed8d117658f6693d21f8 MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 72 length 253 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] eaptls_verify returned 7 [tls] Done initial handshake [tls] <<< TLS 1.0 Handshake [length 03ca], Certificate [tls] chain-depth=1, [tls] error=0 [tls] --> User-Name = 00809f858c17 [tls] --> BUF-Name = [tls] --> subject = /C=DE/ [tls] --> issuer = /C=DE/ [tls] --> verify return:1 [tls] chain-depth=0, [tls] error=0 [tls] --> User-Name = 00809f858c17 [tls] --> BUF-Name = 3850 [tls] --> subject = /C=DE/L=[tls] --> issuer = /C=DE/L= [tls] --> verify return:1 [tls] TLS_accept: SSLv3 read client certificate A [tls] <<< TLS 1.0 Handshake [length 0106], ClientKeyExchange [tls] TLS_accept: SSLv3 read client key exchange A [tls] <<< TLS 1.0 Handshake [length 0106], CertificateVerify [tls] TLS_accept: SSLv3 read certificate verify A [tls] <<< TLS 1.0 ChangeCipherSpec [length 0001] [tls] <<< TLS 1.0 Handshake [length 0010], Finished [tls] TLS_accept: SSLv3 read finished A [tls] >>> TLS 1.0 ChangeCipherSpec [length 0001] [tls] TLS_accept: SSLv3 write change cipher spec A [tls] >>> TLS 1.0 Handshake [length 0010], Finished [tls] TLS_accept: SSLv3 write finished A [tls] TLS_accept: SSLv3 flush data [tls] (other): SSL negotiation finished successfully SSL Connection Established [tls] eaptls_process returned 13 ++[eap] returns handled Sending Access-Challenge of id 131 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x0149003d0d800000003314030100010116030100284751a33290290d3f84335c77caabe21228593b3c56db90e09d9bb1e672ef3a5285b5e7638d2931e5 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa863225aac2a2fa7eff5a1519b312199 Finished request 4. Going to the next request Waking up in 3.6 seconds. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=132, length=343 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" State = 0xa863225aac2a2fa7eff5a1519b312199 EAP-Message = 0x024900060d00 Message-Authenticator = 0xd9f31890976547a84f346a88f7c1d87f MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 73 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP/tls [eap] processing type tls [tls] Authenticate [tls] processing EAP-TLS [tls] Received TLS ACK [tls] ACK handshake is finished [tls] eaptls_verify returned 3 [tls] eaptls_process returned 3 [tls] Adding user data to cached session [eap] Freeing handler ++[eap] returns ok +- entering group post-auth {...} ++[exec] returns noop Sending Access-Accept of id 132 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP MS-MPPE-Recv-Key = 0x78b733f877a98c69f4197d25508c9528eb2cd0d68686ce27dffeb875d0550248 MS-MPPE-Send-Key = 0x5893ecdda559f6e70bafffb3088f4329608a138b74c62db3bf4eba8a187daf2d EAP-Message = 0x03490004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "00809f858c17" Finished request 5. Going to the next request Waking up in 3.6 seconds. Cleaning up request 0 ID 127 with timestamp +2 Cleaning up request 1 ID 128 with timestamp +2 Cleaning up request 2 ID 129 with timestamp +2 Waking up in 1.2 seconds. Cleaning up request 3 ID 130 with timestamp +4 Cleaning up request 4 ID 131 with timestamp +4 Cleaning up request 5 ID 132 with timestamp +4 Ready to process requests. ============================================================================================================================= As soon as I enable "Server Authentication" wthin the IP phone, it fails: ============================================================================================================================= Going to the next request Ready to process requests. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=146, length=336 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" EAP-Message = 0x0217001101303038303966383538633137 Message-Authenticator = 0xb2b310ea9fb4000f3c2a436a6646b653 MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 23 length 17 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] EAP Identity [eap] processing type tls [tls] Requiring client certificate [tls] Initiate [tls] Start returned 1 ++[eap] returns handled Sending Access-Challenge of id 146 to 192.168.10.130 port 1812 Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP EAP-Message = 0x011800060d20 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x750d139875151e34b18bc5eb9140ffe1 Finished request 9. Going to the next request Waking up in 4.9 seconds. rad_recv: Access-Request packet from host 192.168.10.130 port 1812, id=147, length=343 Framed-MTU = 1480 NAS-IP-Address = 192.168.10.130 NAS-Identifier = "Switch" User-Name = "00809f858c17" Service-Type = Framed-User Framed-Protocol = PPP NAS-Port = 199 NAS-Port-Type = Ethernet NAS-Port-Id = "I7" Called-Station-Id = "00-21-f7-eb-c3-00" Calling-Station-Id = "00-80-9f-85-8c-17" Connect-Info = "CONNECT Ethernet 1000Mbps Full duplex" Tunnel-Type:0 = VLAN Tunnel-Medium-Type:0 = IEEE-802 Tunnel-Private-Group-Id:0 = "104" State = 0x750d139875151e34b18bc5eb9140ffe1 EAP-Message = 0x02180006030d Message-Authenticator = 0xc861eecfeba7db7c00683c189e63b265 MS-RAS-Vendor = 11 HP-Attr-255 = 0x011a0000000b28 HP-Attr-255 = 0x011a0000000b2e HP-Attr-255 = 0x011a0000000b3d HP-Attr-255 = 0x0138 HP-Attr-255 = 0x013a HP-Attr-255 = 0x0140 HP-Attr-255 = 0x0141 HP-Attr-255 = 0x0151 +- entering group authorize {...} ++[preprocess] returns ok [suffix] No '@' in User-Name = "00809f858c17", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] EAP packet type response id 24 length 6 [eap] No EAP Start, assuming it's an on-going EAP conversation ++[eap] returns updated ++[unix] returns notfound [files] users: Matched entry DEFAULT at line 234 ++[files] returns ok ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop Found Auth-Type = EAP +- entering group authenticate {...} [eap] Request found, released from the list [eap] EAP NAK [eap] ERROR! Our request for tls was NAK'd with a request for tls. Skipping the requested type. [eap] No common EAP types found. [eap] Failed in EAP select ++[eap] returns invalid Failed to authenticate the user. Using Post-Auth-Type Reject +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} -> 00809f858c17 attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 10 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 10 Sending Access-Reject of id 147 to 192.168.10.130 port 1812 EAP-Message = 0x04180004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 3.9 seconds. Cleaning up request 9 ID 146 with timestamp +131 Waking up in 1.0 seconds. Cleaning up request 10 ID 147 with timestamp +131 Ready to process requests. Well, what´s going wrong? Michael