EAP-TLS, anonymous user ids, "WARNING: Outer and inner identities are the same"

31 Jul 2021

      Newbie EAP-TLS question here; we've been using FreeRADIUS for a long time with PEAP-MSCHAPv2 and are trying to make the switch to pure certificate-based auth.  Here's the warning I'm getting:

WARNING: Outer and inner identities are the same.  User privacy is compromised.

I couldn't find much about this on the list archives (just one post with an unspecified EAP type and non-anonymous ids).  I understand that this is a problem with tunneled EAP types (because the outer request isn't secure), but I wasn't sure about EAP-TLS; it doesn't really have an inner/outer, right?

I have a test cert deployed (both real-world client and eapol_test) that is validating on FreeRADIUS.  We're using "@suffieldacademy.org" as the anonymized user id, which I believe is the IETF recommendation (anonymous@suffieldacademy.org being the second choice).

In the FreeRADIUS config we are ignoring the user id and just relying on the certificate details to authorize the user.  We are updating the User-Name attribute in the "check-eap-tls" virtual server, so the cert details are used in the User-Name that is reported back to the NAS.  However, the warning is still there (before the virtual "check-eap-tls"), so that doesn't seem to be the way to quiet the message.

So my questions are:

1) Is this warning an issue for EAP-TLS, or is it a harmless side effect of my using an anonymous user id in the request?

2a) If I'm doing it wrong, what should I send as the user id?  My MDM only lets me set one user id, so I'm not sure what I would configure differently.  If I leave it blank, it sends the certificate CN which seems like a much bigger privacy issue.

2b) If I'm correct that the warning isn't an issue in my use case, is there a way for me to quiet the warning (e.g., by updating the User-Name somehow so the check doesn't trigger the warning)?  Just updating the reply:User-Name doesn't stop the error, though the NAS gets the correct value in the reply.

Debug output below (apologies for not having the latest version, but we're targeting Debian Bullseye and there aren't official packages yet as Bullseye doesn't officially release until next month).

Many thanks!

Jason

# freeradius -X
FreeRADIUS Version 3.0.21
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/rfc7542
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/sa-check-eap-tls
main {
 security {
 	user = "freerad"
 	group = "freerad"
 	allow_core_dumps = no
 }
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
}
main {
	name = "freeradius"
	prefix = "/usr"
	localstatedir = "/var"
	sbindir = "/usr/sbin"
	logdir = "/var/log/freeradius"
	run_dir = "/var/run/freeradius"
	libdir = "/usr/lib/freeradius"
	radacctdir = "/var/log/freeradius/radacct"
	hostname_lookups = no
	max_request_time = 30
	cleanup_delay = 5
	max_requests = 16384
	pidfile = "/var/run/freeradius/freeradius.pid"
	checkrad = "/usr/sbin/checkrad"
	debug_level = 0
	proxy_requests = yes
 log {
 	stripped_names = no
 	auth = no
 	auth_badpass = no
 	auth_goodpass = no
 	colourise = yes
 	msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
 	max_attributes = 200
 	reject_delay = 1.000000
 	status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
 	retry_delay = 5
 	retry_count = 3
 	default_fallback = no
 	dead_time = 120
 	wake_all_if_all_dead = no
 }
 home_server localhost {
 	ipaddr = 127.0.0.1
 	port = 1812
 	type = "auth"
 	secret = <<< secret >>>
 	response_window = 20.000000
 	response_timeouts = 1
 	max_outstanding = 65536
 	zombie_period = 40
 	status_check = "status-server"
 	ping_interval = 30
 	check_interval = 30
 	check_timeout = 4
 	num_answers_to_alive = 3
 	revive_interval = 120
  limit {
  	max_connections = 16
  	max_requests = 0
  	lifetime = 0
  	idle_timeout = 0
  }
  coa {
  	irt = 2
  	mrt = 16
  	mrc = 5
  	mrd = 30
  }
 }
 home_server_pool my_auth_failover {
	type = fail-over
	home_server = localhost
 }
 realm example.com {
	auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
 	ipaddr = 127.0.0.1
 	require_message_authenticator = no
 	secret = <<< secret >>>
 	nas_type = "other"
 	proto = "*"
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client localhost_ipv6 {
 	ipv6addr = ::1
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
 client mgmt-wifi-1 {
 	ipv6addr = 2607:f460:1833:15::/64
 	require_message_authenticator = no
 	secret = <<< secret >>>
  limit {
  	max_connections = 16
  	lifetime = 0
  	idle_timeout = 30
  }
 }
Debugger not attached
systemd watchdog is disabled
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog {
  	filename = "/var/log/freeradius/linelog"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = "This is a log message for %{User-Name}"
  	reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  linelog log_accounting {
  	filename = "/var/log/freeradius/linelog-accounting"
  	escape_filenames = no
  	syslog_severity = "info"
  	permissions = 384
  	format = ""
  	reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  always reject {
  	rcode = "reject"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  always fail {
  	rcode = "fail"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  always ok {
  	rcode = "ok"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  always handled {
  	rcode = "handled"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  always invalid {
  	rcode = "invalid"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  always userlock {
  	rcode = "userlock"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  always notfound {
  	rcode = "notfound"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  always noop {
  	rcode = "noop"
  	simulcount = 0
  	mpp = no
  }
  # Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  always updated {
  	rcode = "updated"
  	simulcount = 0
  	mpp = no
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  logintime {
  	minimum_timeout = 60
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
  exec echo {
  	wait = yes
  	program = "/bin/echo %{User-Name}"
  	input_pairs = "request"
  	output_pairs = "reply"
  	shell_escape = yes
  }
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
  eap {
  	default_eap_type = "tls"
  	timer_expire = 60
  	ignore_unknown_eap_types = no
  	cisco_accounting_username_bug = no
  	max_sessions = 16384
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
  	key = "%{Realm}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  	filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
  	key = "%{User-Name}"
  	relaxed = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
  unix {
  	radwtmp = "/var/log/freeradius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_radutmp
  # Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
  radutmp sradutmp {
  	filename = "/var/log/freeradius/sradutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 420
  	caller_id = no
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
  expr {
  	safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
  soh {
  	dhcp = yes
  }
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
  # Loaded module rlm_detail
  # Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail auth_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail reply_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail pre_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  detail post_proxy_log {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
  passwd etc_passwd {
  	filename = "/etc/passwd"
  	format = "*User-Name:Crypt-Password:"
  	delimiter = ":"
  	ignore_nislike = no
  	ignore_empty = yes
  	allow_multiple_keys = no
  	hash_size = 100
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  pap {
  	normalise = yes
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
  # Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  detail {
  	filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  	header = "%t"
  	permissions = 384
  	locking = no
  	escape_filenames = no
  	log_packet_header = no
  }
  # Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
  exec ntlm_auth {
  	wait = yes
  	program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
  	shell_escape = yes
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
  files {
  	filename = "/etc/freeradius/3.0/mods-config/files/authorize"
  	acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
  	preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
  mschap {
  	use_mppe = yes
  	require_encryption = no
  	require_strong = no
  	with_ntdomain_hack = yes
   passchange {
   }
  	allow_retry = yes
  	winbind_retry_with_normalised_username = no
  }
  # Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
  radutmp {
  	filename = "/var/log/freeradius/radutmp"
  	username = "%{User-Name}"
  	case_sensitive = yes
  	check_with_nas = yes
  	permissions = 384
  	caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  realm IPASS {
  	format = "prefix"
  	delimiter = "/"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  realm suffix {
  	format = "suffix"
  	delimiter = "@"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  realm bangpath {
  	format = "prefix"
  	delimiter = "!"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  realm realmpercent {
  	format = "suffix"
  	delimiter = "%"
  	ignore_default = no
  	ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  realm ntdomain {
  	format = "prefix"
  	delimiter = "\\"
  	ignore_default = no
  	ignore_null = no
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
  preprocess {
  	huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
  	hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
  	with_ascend_hack = no
  	ascend_channels_per_line = 23
  	with_ntdomain_hack = no
  	with_specialix_jetstream_hack = no
  	with_cisco_vsa_hack = no
  	with_alvarion_vsa_hack = no
  }
  # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
  exec {
  	wait = no
  	input_pairs = "request"
  	shell_escape = yes
  	timeout = 10
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
  cache cache_eap {
  	driver = "rlm_cache_rbtree"
  	key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  	ttl = 15
  	max_entries = 0
  	epoch = 0
  	add_stats = no
  }
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
  instantiate {
  }
  # Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
  # Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
  # Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
  # Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
   	tls = "tls-common"
   	virtual_server = "sa-check-eap-tls"
   }
   tls-config tls-common {
   	verify_depth = 0
   	pem_file_type = yes
   	private_key_file = "/etc/ssl/private/sa-radius-eduroam-2026.suffieldacademy.org-key.pem"
   	certificate_file = "/etc/ssl/private/sa-radius-eduroam-2026.suffieldacademy.org-crt.pem"
   	ca_file = "/etc/ssl/private/sa-radius-eduroam-2026.suffieldacademy.org-root-and-intermediate.pem"
   	private_key_password = <<< secret >>>
   	fragment_size = 1024
   	include_length = yes
   	auto_chain = yes
   	check_crl = no
   	check_all_crl = no
   	cipher_list = "DEFAULT"
   	cipher_server_preference = no
   	ecdh_curve = "prime256v1"
   	tls_max_version = "1.2"
   	tls_min_version = "1.2"
    cache {
    	enable = no
    	lifetime = 24
    	max_entries = 255
    }
    verify {
    	skip_if_ocsp_ok = no
    }
    ocsp {
    	enable = no
    	override_cert_url = yes
    	url = "http://127.0.0.1/ocsp/"
    	use_nonce = yes
    	timeout = 0
    	softfail = no
    }
   }
  # Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
  # Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
  # Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
  # Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
  # Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
  # Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
  # Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
  # Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "bangpath" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
  # Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
  # Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server sa-check-eap-tls { # from file /etc/freeradius/3.0/sites-enabled/sa-check-eap-tls
 # Loading authorize {...}
} # server sa-check-eap-tls
radiusd: #### Opening IP addresses and Ports ####
listen {
  	type = "auth"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipaddr = *
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "auth"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
listen {
  	type = "acct"
  	ipv6addr = ::
  	port = 0
   limit {
   	max_connections = 16
   	lifetime = 0
   	idle_timeout = 30
   }
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 55009
Listening on proxy address :: port 35913
Ready to process requests
(0) Received Access-Request Id 0 from 127.0.0.1:36986 to 127.0.0.1:1812 length 154
(0)   User-Name = "@suffieldacademy.org"
(0)   NAS-IP-Address = 127.0.0.1
(0)   Calling-Station-Id = "02-00-00-00-00-01"
(0)   Framed-MTU = 1400
(0)   NAS-Port-Type = Wireless-802.11
(0)   Service-Type = Framed-User
(0)   Connect-Info = "CONNECT 11Mbps 802.11b"
(0)   EAP-Message = 0x020d001901407375666669656c6461636164656d792e6f7267
(0)   Message-Authenticator = 0x91cf8cf6a1df3fa822a9ef8372a84043
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0)   authorize {
(0)     policy filter_username {
(0)       if (&User-Name) {
(0)       if (&User-Name)  -> TRUE
(0)       if (&User-Name)  {
(0)         if (&User-Name =~ / /) {
(0)         if (&User-Name =~ / /)  -> FALSE
(0)         if (&User-Name =~ /@[^@]*@/ ) {
(0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(0)         if (&User-Name =~ /\.\./ ) {
(0)         if (&User-Name =~ /\.\./ )  -> FALSE
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(0)         if (&User-Name =~ /\.$/)  {
(0)         if (&User-Name =~ /\.$/)   -> FALSE
(0)         if (&User-Name =~ /@\./)  {
(0)         if (&User-Name =~ /@\./)   -> FALSE
(0)       } # if (&User-Name)  = notfound
(0)     } # policy filter_username = notfound
(0)     [preprocess] = ok
(0)     [chap] = noop
(0)     [mschap] = noop
(0)     [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(0) suffix: No such realm "suffieldacademy.org"
(0)     [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 13 length 25
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0)     [eap] = ok
(0)   } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_tls to process data
(0) eap_tls: Initiating new TLS session
(0) eap_tls: Setting verify mode to require certificate from client
(0) eap_tls: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 14 length 6
(0) eap: EAP session adding &reply:State = 0xed196798ed176a4f
(0)     [eap] = handled
(0)   } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0)   Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 0 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(0)   EAP-Message = 0x010e00060d20
(0)   Message-Authenticator = 0x00000000000000000000000000000000
(0)   State = 0xed196798ed176a4fafc8729dfaa7718e
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 1 from 127.0.0.1:36986 to 127.0.0.1:1812 length 343
(1)   User-Name = "@suffieldacademy.org"
(1)   NAS-IP-Address = 127.0.0.1
(1)   Calling-Station-Id = "02-00-00-00-00-01"
(1)   Framed-MTU = 1400
(1)   NAS-Port-Type = Wireless-802.11
(1)   Service-Type = Framed-User
(1)   Connect-Info = "CONNECT 11Mbps 802.11b"
(1)   EAP-Message = 0x020e00c40d0016030100b9010000b50303edb1c3cd3c06f2e8a6892d59e9373d14cbab4d882e70ad6d260c090ef20c2a86000038c02cc030009fcca9cca8ccaac02bc02f009ec024c028006bc023c0270067c00ac0140039c009c0130033009d009c003d003c0035002f00ff01000054000b000403000102000a000c000a001d0017001e001900180016000000170000000d0030002e040305030603080708080809080a080b080408050806040105010601030302030301020103020202040205020602
(1)   State = 0xed196798ed176a4fafc8729dfaa7718e
(1)   Message-Authenticator = 0x4b74eb6ef3118ac0cf2b501def1b43b7
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1)   authorize {
(1)     policy filter_username {
(1)       if (&User-Name) {
(1)       if (&User-Name)  -> TRUE
(1)       if (&User-Name)  {
(1)         if (&User-Name =~ / /) {
(1)         if (&User-Name =~ / /)  -> FALSE
(1)         if (&User-Name =~ /@[^@]*@/ ) {
(1)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(1)         if (&User-Name =~ /\.\./ ) {
(1)         if (&User-Name =~ /\.\./ )  -> FALSE
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(1)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(1)         if (&User-Name =~ /\.$/)  {
(1)         if (&User-Name =~ /\.$/)   -> FALSE
(1)         if (&User-Name =~ /@\./)  {
(1)         if (&User-Name =~ /@\./)   -> FALSE
(1)       } # if (&User-Name)  = notfound
(1)     } # policy filter_username = notfound
(1)     [preprocess] = ok
(1)     [chap] = noop
(1)     [mschap] = noop
(1)     [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(1) suffix: No such realm "suffieldacademy.org"
(1)     [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 14 length 196
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1)     [eap] = updated
(1)     [files] = noop
(1)     [expiration] = noop
(1)     [logintime] = noop
(1)     [pap] = noop
(1)   } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   authenticate {
(1) eap: Expiring EAP session with state 0xed196798ed176a4f
(1) eap: Finished EAP session with state 0xed196798ed176a4f
(1) eap: Previous EAP request found for state 0xed196798ed176a4f, released from the list
(1) eap: Peer sent packet with method EAP TLS (13)
(1) eap: Calling submodule eap_tls to process data
(1) eap_tls: Continuing EAP-TLS
(1) eap_tls: Got final TLS record fragment (190 bytes)
(1) eap_tls: WARNING: Total received TLS record fragments (190 bytes), does not equal indicated TLS record length (0 bytes)
(1) eap_tls: [eaptls verify] = ok
(1) eap_tls: Done initial handshake
(1) eap_tls: (other): before SSL initialization
(1) eap_tls: TLS_accept: before SSL initialization
(1) eap_tls: TLS_accept: before SSL initialization
(1) eap_tls: <<< recv TLS 1.3  [length 00b9] 
(1) eap_tls: TLS_accept: SSLv3/TLS read client hello
(1) eap_tls: >>> send TLS 1.2  [length 003d] 
(1) eap_tls: TLS_accept: SSLv3/TLS write server hello
(1) eap_tls: >>> send TLS 1.2  [length 0cf8] 
(1) eap_tls: TLS_accept: SSLv3/TLS write certificate
(1) eap_tls: >>> send TLS 1.2  [length 014d] 
(1) eap_tls: TLS_accept: SSLv3/TLS write key exchange
(1) eap_tls: >>> send TLS 1.2  [length 00ce] 
(1) eap_tls: TLS_accept: SSLv3/TLS write certificate request
(1) eap_tls: >>> send TLS 1.2  [length 0004] 
(1) eap_tls: TLS_accept: SSLv3/TLS write server done
(1) eap_tls: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_tls: TLS - In Handshake Phase
(1) eap_tls: TLS - got 3949 bytes of data
(1) eap_tls: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 15 length 1024
(1) eap: EAP session adding &reply:State = 0xed196798ec166a4f
(1)     [eap] = handled
(1)   } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1)   Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 1 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(1)   EAP-Message = 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
(1)   Message-Authenticator = 0x00000000000000000000000000000000
(1)   State = 0xed196798ec166a4fafc8729dfaa7718e
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 2 from 127.0.0.1:36986 to 127.0.0.1:1812 length 153
(2)   User-Name = "@suffieldacademy.org"
(2)   NAS-IP-Address = 127.0.0.1
(2)   Calling-Station-Id = "02-00-00-00-00-01"
(2)   Framed-MTU = 1400
(2)   NAS-Port-Type = Wireless-802.11
(2)   Service-Type = Framed-User
(2)   Connect-Info = "CONNECT 11Mbps 802.11b"
(2)   EAP-Message = 0x020f00060d00
(2)   State = 0xed196798ec166a4fafc8729dfaa7718e
(2)   Message-Authenticator = 0xcad4e715b6f0e83413c1962adef02ebf
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2)   authorize {
(2)     policy filter_username {
(2)       if (&User-Name) {
(2)       if (&User-Name)  -> TRUE
(2)       if (&User-Name)  {
(2)         if (&User-Name =~ / /) {
(2)         if (&User-Name =~ / /)  -> FALSE
(2)         if (&User-Name =~ /@[^@]*@/ ) {
(2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(2)         if (&User-Name =~ /\.\./ ) {
(2)         if (&User-Name =~ /\.\./ )  -> FALSE
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(2)         if (&User-Name =~ /\.$/)  {
(2)         if (&User-Name =~ /\.$/)   -> FALSE
(2)         if (&User-Name =~ /@\./)  {
(2)         if (&User-Name =~ /@\./)   -> FALSE
(2)       } # if (&User-Name)  = notfound
(2)     } # policy filter_username = notfound
(2)     [preprocess] = ok
(2)     [chap] = noop
(2)     [mschap] = noop
(2)     [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(2) suffix: No such realm "suffieldacademy.org"
(2)     [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 15 length 6
(2) eap: No EAP Start, assuming it's an on-going EAP conversation
(2)     [eap] = updated
(2)     [files] = noop
(2)     [expiration] = noop
(2)     [logintime] = noop
(2)     [pap] = noop
(2)   } # authorize = updated
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   authenticate {
(2) eap: Expiring EAP session with state 0xed196798ec166a4f
(2) eap: Finished EAP session with state 0xed196798ec166a4f
(2) eap: Previous EAP request found for state 0xed196798ec166a4f, released from the list
(2) eap: Peer sent packet with method EAP TLS (13)
(2) eap: Calling submodule eap_tls to process data
(2) eap_tls: Continuing EAP-TLS
(2) eap_tls: Peer ACKed our handshake fragment
(2) eap_tls: [eaptls verify] = request
(2) eap_tls: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 16 length 1024
(2) eap: EAP session adding &reply:State = 0xed196798ef096a4f
(2)     [eap] = handled
(2)   } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2)   Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 2 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(2)   EAP-Message = 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
(2)   Message-Authenticator = 0x00000000000000000000000000000000
(2)   State = 0xed196798ef096a4fafc8729dfaa7718e
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 3 from 127.0.0.1:36986 to 127.0.0.1:1812 length 153
(3)   User-Name = "@suffieldacademy.org"
(3)   NAS-IP-Address = 127.0.0.1
(3)   Calling-Station-Id = "02-00-00-00-00-01"
(3)   Framed-MTU = 1400
(3)   NAS-Port-Type = Wireless-802.11
(3)   Service-Type = Framed-User
(3)   Connect-Info = "CONNECT 11Mbps 802.11b"
(3)   EAP-Message = 0x021000060d00
(3)   State = 0xed196798ef096a4fafc8729dfaa7718e
(3)   Message-Authenticator = 0x48a6d115a3f3d4dbf67bfbae3eae0df6
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3)   authorize {
(3)     policy filter_username {
(3)       if (&User-Name) {
(3)       if (&User-Name)  -> TRUE
(3)       if (&User-Name)  {
(3)         if (&User-Name =~ / /) {
(3)         if (&User-Name =~ / /)  -> FALSE
(3)         if (&User-Name =~ /@[^@]*@/ ) {
(3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(3)         if (&User-Name =~ /\.\./ ) {
(3)         if (&User-Name =~ /\.\./ )  -> FALSE
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(3)         if (&User-Name =~ /\.$/)  {
(3)         if (&User-Name =~ /\.$/)   -> FALSE
(3)         if (&User-Name =~ /@\./)  {
(3)         if (&User-Name =~ /@\./)   -> FALSE
(3)       } # if (&User-Name)  = notfound
(3)     } # policy filter_username = notfound
(3)     [preprocess] = ok
(3)     [chap] = noop
(3)     [mschap] = noop
(3)     [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(3) suffix: No such realm "suffieldacademy.org"
(3)     [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 16 length 6
(3) eap: No EAP Start, assuming it's an on-going EAP conversation
(3)     [eap] = updated
(3)     [files] = noop
(3)     [expiration] = noop
(3)     [logintime] = noop
(3)     [pap] = noop
(3)   } # authorize = updated
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   authenticate {
(3) eap: Expiring EAP session with state 0xed196798ef096a4f
(3) eap: Finished EAP session with state 0xed196798ef096a4f
(3) eap: Previous EAP request found for state 0xed196798ef096a4f, released from the list
(3) eap: Peer sent packet with method EAP TLS (13)
(3) eap: Calling submodule eap_tls to process data
(3) eap_tls: Continuing EAP-TLS
(3) eap_tls: Peer ACKed our handshake fragment
(3) eap_tls: [eaptls verify] = request
(3) eap_tls: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 17 length 1024
(3) eap: EAP session adding &reply:State = 0xed196798ee086a4f
(3)     [eap] = handled
(3)   } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3)   Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 3 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(3)   EAP-Message = 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
(3)   Message-Authenticator = 0x00000000000000000000000000000000
(3)   State = 0xed196798ee086a4fafc8729dfaa7718e
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 4 from 127.0.0.1:36986 to 127.0.0.1:1812 length 153
(4)   User-Name = "@suffieldacademy.org"
(4)   NAS-IP-Address = 127.0.0.1
(4)   Calling-Station-Id = "02-00-00-00-00-01"
(4)   Framed-MTU = 1400
(4)   NAS-Port-Type = Wireless-802.11
(4)   Service-Type = Framed-User
(4)   Connect-Info = "CONNECT 11Mbps 802.11b"
(4)   EAP-Message = 0x021100060d00
(4)   State = 0xed196798ee086a4fafc8729dfaa7718e
(4)   Message-Authenticator = 0x1e86802a1d3a8f909350405386788df1
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4)   authorize {
(4)     policy filter_username {
(4)       if (&User-Name) {
(4)       if (&User-Name)  -> TRUE
(4)       if (&User-Name)  {
(4)         if (&User-Name =~ / /) {
(4)         if (&User-Name =~ / /)  -> FALSE
(4)         if (&User-Name =~ /@[^@]*@/ ) {
(4)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(4)         if (&User-Name =~ /\.\./ ) {
(4)         if (&User-Name =~ /\.\./ )  -> FALSE
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(4)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(4)         if (&User-Name =~ /\.$/)  {
(4)         if (&User-Name =~ /\.$/)   -> FALSE
(4)         if (&User-Name =~ /@\./)  {
(4)         if (&User-Name =~ /@\./)   -> FALSE
(4)       } # if (&User-Name)  = notfound
(4)     } # policy filter_username = notfound
(4)     [preprocess] = ok
(4)     [chap] = noop
(4)     [mschap] = noop
(4)     [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(4) suffix: No such realm "suffieldacademy.org"
(4)     [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 17 length 6
(4) eap: No EAP Start, assuming it's an on-going EAP conversation
(4)     [eap] = updated
(4)     [files] = noop
(4)     [expiration] = noop
(4)     [logintime] = noop
(4)     [pap] = noop
(4)   } # authorize = updated
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   authenticate {
(4) eap: Expiring EAP session with state 0xed196798ee086a4f
(4) eap: Finished EAP session with state 0xed196798ee086a4f
(4) eap: Previous EAP request found for state 0xed196798ee086a4f, released from the list
(4) eap: Peer sent packet with method EAP TLS (13)
(4) eap: Calling submodule eap_tls to process data
(4) eap_tls: Continuing EAP-TLS
(4) eap_tls: Peer ACKed our handshake fragment
(4) eap_tls: [eaptls verify] = request
(4) eap_tls: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 18 length 917
(4) eap: EAP session adding &reply:State = 0xed196798e90b6a4f
(4)     [eap] = handled
(4)   } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4)   Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 4 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(4)   EAP-Message = 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
(4)   Message-Authenticator = 0x00000000000000000000000000000000
(4)   State = 0xed196798e90b6a4fafc8729dfaa7718e
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 5 from 127.0.0.1:36986 to 127.0.0.1:1812 length 1565
(5)   User-Name = "@suffieldacademy.org"
(5)   NAS-IP-Address = 127.0.0.1
(5)   Calling-Station-Id = "02-00-00-00-00-01"
(5)   Framed-MTU = 1400
(5)   NAS-Port-Type = Wireless-802.11
(5)   Service-Type = Framed-User
(5)   Connect-Info = "CONNECT 11Mbps 802.11b"
(5)   EAP-Message = 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
(5)   State = 0xed196798e90b6a4fafc8729dfaa7718e
(5)   Message-Authenticator = 0xa94983a613ff0986e6a71723b562c382
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5)   authorize {
(5)     policy filter_username {
(5)       if (&User-Name) {
(5)       if (&User-Name)  -> TRUE
(5)       if (&User-Name)  {
(5)         if (&User-Name =~ / /) {
(5)         if (&User-Name =~ / /)  -> FALSE
(5)         if (&User-Name =~ /@[^@]*@/ ) {
(5)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(5)         if (&User-Name =~ /\.\./ ) {
(5)         if (&User-Name =~ /\.\./ )  -> FALSE
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(5)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(5)         if (&User-Name =~ /\.$/)  {
(5)         if (&User-Name =~ /\.$/)   -> FALSE
(5)         if (&User-Name =~ /@\./)  {
(5)         if (&User-Name =~ /@\./)   -> FALSE
(5)       } # if (&User-Name)  = notfound
(5)     } # policy filter_username = notfound
(5)     [preprocess] = ok
(5)     [chap] = noop
(5)     [mschap] = noop
(5)     [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(5) suffix: No such realm "suffieldacademy.org"
(5)     [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 18 length 1408
(5) eap: No EAP Start, assuming it's an on-going EAP conversation
(5)     [eap] = updated
(5)     [files] = noop
(5)     [expiration] = noop
(5)     [logintime] = noop
(5)     [pap] = noop
(5)   } # authorize = updated
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   authenticate {
(5) eap: Expiring EAP session with state 0xed196798e90b6a4f
(5) eap: Finished EAP session with state 0xed196798e90b6a4f
(5) eap: Previous EAP request found for state 0xed196798e90b6a4f, released from the list
(5) eap: Peer sent packet with method EAP TLS (13)
(5) eap: Calling submodule eap_tls to process data
(5) eap_tls: Continuing EAP-TLS
(5) eap_tls: Peer indicated complete TLS record size will be 3664 bytes
(5) eap_tls: Expecting 3 TLS record fragments
(5) eap_tls: Got first TLS record fragment (1398 bytes).  Peer indicated more fragments to follow
(5) eap_tls: [eaptls verify] = first fragment
(5) eap_tls: ACKing Peer's TLS record fragment
(5) eap_tls: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 19 length 6
(5) eap: EAP session adding &reply:State = 0xed196798e80a6a4f
(5)     [eap] = handled
(5)   } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5)   Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 5 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(5)   EAP-Message = 0x011300060d00
(5)   Message-Authenticator = 0x00000000000000000000000000000000
(5)   State = 0xed196798e80a6a4fafc8729dfaa7718e
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 6 from 127.0.0.1:36986 to 127.0.0.1:1812 length 1561
(6)   User-Name = "@suffieldacademy.org"
(6)   NAS-IP-Address = 127.0.0.1
(6)   Calling-Station-Id = "02-00-00-00-00-01"
(6)   Framed-MTU = 1400
(6)   NAS-Port-Type = Wireless-802.11
(6)   Service-Type = Framed-User
(6)   Connect-Info = "CONNECT 11Mbps 802.11b"
(6)   EAP-Message = 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
(6)   State = 0xed196798e80a6a4fafc8729dfaa7718e
(6)   Message-Authenticator = 0xfd86936da3d74e65255829cc51c5b39a
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6)   authorize {
(6)     policy filter_username {
(6)       if (&User-Name) {
(6)       if (&User-Name)  -> TRUE
(6)       if (&User-Name)  {
(6)         if (&User-Name =~ / /) {
(6)         if (&User-Name =~ / /)  -> FALSE
(6)         if (&User-Name =~ /@[^@]*@/ ) {
(6)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(6)         if (&User-Name =~ /\.\./ ) {
(6)         if (&User-Name =~ /\.\./ )  -> FALSE
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(6)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(6)         if (&User-Name =~ /\.$/)  {
(6)         if (&User-Name =~ /\.$/)   -> FALSE
(6)         if (&User-Name =~ /@\./)  {
(6)         if (&User-Name =~ /@\./)   -> FALSE
(6)       } # if (&User-Name)  = notfound
(6)     } # policy filter_username = notfound
(6)     [preprocess] = ok
(6)     [chap] = noop
(6)     [mschap] = noop
(6)     [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(6) suffix: No such realm "suffieldacademy.org"
(6)     [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 19 length 1404
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6)     [eap] = updated
(6)     [files] = noop
(6)     [expiration] = noop
(6)     [logintime] = noop
(6)     [pap] = noop
(6)   } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   authenticate {
(6) eap: Expiring EAP session with state 0xed196798e80a6a4f
(6) eap: Finished EAP session with state 0xed196798e80a6a4f
(6) eap: Previous EAP request found for state 0xed196798e80a6a4f, released from the list
(6) eap: Peer sent packet with method EAP TLS (13)
(6) eap: Calling submodule eap_tls to process data
(6) eap_tls: Continuing EAP-TLS
(6) eap_tls: Got additional TLS record fragment (1398 bytes).  Peer indicated more fragments to follow
(6) eap_tls: [eaptls verify] = more fragments
(6) eap_tls: ACKing Peer's TLS record fragment
(6) eap_tls: [eaptls process] = handled
(6) eap: Sending EAP Request (code 1) ID 20 length 6
(6) eap: EAP session adding &reply:State = 0xed196798eb0d6a4f
(6)     [eap] = handled
(6)   } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6)   Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 6 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(6)   EAP-Message = 0x011400060d00
(6)   Message-Authenticator = 0x00000000000000000000000000000000
(6)   State = 0xed196798eb0d6a4fafc8729dfaa7718e
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 7 from 127.0.0.1:36986 to 127.0.0.1:1812 length 1027
(7)   User-Name = "@suffieldacademy.org"
(7)   NAS-IP-Address = 127.0.0.1
(7)   Calling-Station-Id = "02-00-00-00-00-01"
(7)   Framed-MTU = 1400
(7)   NAS-Port-Type = Wireless-802.11
(7)   Service-Type = Framed-User
(7)   Connect-Info = "CONNECT 11Mbps 802.11b"
(7)   EAP-Message = 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
(7)   State = 0xed196798eb0d6a4fafc8729dfaa7718e
(7)   Message-Authenticator = 0x29e0289da62d9fab4a04502cc5f3f368
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7)   authorize {
(7)     policy filter_username {
(7)       if (&User-Name) {
(7)       if (&User-Name)  -> TRUE
(7)       if (&User-Name)  {
(7)         if (&User-Name =~ / /) {
(7)         if (&User-Name =~ / /)  -> FALSE
(7)         if (&User-Name =~ /@[^@]*@/ ) {
(7)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(7)         if (&User-Name =~ /\.\./ ) {
(7)         if (&User-Name =~ /\.\./ )  -> FALSE
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(7)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(7)         if (&User-Name =~ /\.$/)  {
(7)         if (&User-Name =~ /\.$/)   -> FALSE
(7)         if (&User-Name =~ /@\./)  {
(7)         if (&User-Name =~ /@\./)   -> FALSE
(7)       } # if (&User-Name)  = notfound
(7)     } # policy filter_username = notfound
(7)     [preprocess] = ok
(7)     [chap] = noop
(7)     [mschap] = noop
(7)     [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(7) suffix: No such realm "suffieldacademy.org"
(7)     [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 20 length 874
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7)     [eap] = updated
(7)     [files] = noop
(7)     [expiration] = noop
(7)     [logintime] = noop
(7)     [pap] = noop
(7)   } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   authenticate {
(7) eap: Expiring EAP session with state 0xed196798eb0d6a4f
(7) eap: Finished EAP session with state 0xed196798eb0d6a4f
(7) eap: Previous EAP request found for state 0xed196798eb0d6a4f, released from the list
(7) eap: Peer sent packet with method EAP TLS (13)
(7) eap: Calling submodule eap_tls to process data
(7) eap_tls: Continuing EAP-TLS
(7) eap_tls: Got final TLS record fragment (868 bytes)
(7) eap_tls: [eaptls verify] = ok
(7) eap_tls: Done initial handshake
(7) eap_tls: TLS_accept: SSLv3/TLS write server done
(7) eap_tls: <<< recv TLS 1.2  [length 0cc0] 
(7) eap_tls: TLS - Creating attributes from certificate OIDs
(7) eap_tls: TLS - Creating attributes from certificate OIDs
(7) eap_tls:   TLS-Cert-Serial := "460d875635c64859ebabee3bba64e93f"
(7) eap_tls:   TLS-Cert-Expiration := "390703160000Z"
(7) eap_tls:   TLS-Cert-Valid-Since := "190703161900Z"
(7) eap_tls:   TLS-Cert-Subject := "/O=Suffield Academy/CN=Suffield Academy Device Intermediate CA"
(7) eap_tls:   TLS-Cert-Issuer := "/O=Suffield Academy/CN=Suffield Academy Device Root CA"
(7) eap_tls:   TLS-Cert-Common-Name := "Suffield Academy Device Intermediate CA"
(7) eap_tls: TLS - Creating attributes from certificate OIDs
(7) eap_tls:   TLS-Client-Cert-Serial := "3888adb8c63f74e45be610200664b4b7"
(7) eap_tls:   TLS-Client-Cert-Expiration := "220730225507Z"
(7) eap_tls:   TLS-Client-Cert-Valid-Since := "210730224500Z"
(7) eap_tls:   TLS-Client-Cert-Subject := "/O=Suffield Academy/CN=Test User (TestDevice SER1234567890)"
(7) eap_tls:   TLS-Client-Cert-Issuer := "/O=Suffield Academy/CN=Suffield Academy Device Intermediate CA"
(7) eap_tls:   TLS-Client-Cert-Common-Name := "Test User (TestDevice SER1234567890)"
(7) eap_tls:   TLS-Client-Cert-Subject-Alt-Name-Email := "USERNAME@suffieldacademy.org"
(7) eap_tls:   TLS-Client-Cert-Subject-Alt-Name-Dns := "FILEMAKER_ID"
(7) eap_tls:   TLS-Client-Cert-Subject-Alt-Name-Upn := "Test User (TestDevice SER1234567890)"
(7) eap_tls:   TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:3E:93:53:11:87:4F:79:3B:00:46:29:37:DB:15:7D:50:48:DA:3F:B9\nDirName:/O=Suffield Academy/CN=Suffield Academy Device Root CA\nserial:46:0D:87:56:35:C6:48:59:EB:AB:EE:3B:BA:64:E9:3F\n"
(7) eap_tls:   TLS-Client-Cert-X509v3-Subject-Key-Identifier += "33:6E:27:C7:39:B0:26:C5:9F:35:61:E3:F1:37:A1:51:C0:AF:35:12"
(7) eap_tls:   TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE"
(7) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication"
(7) eap_tls:   TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2"
(7) eap_tls: TLS_accept: SSLv3/TLS read client certificate
(7) eap_tls: <<< recv TLS 1.2  [length 0046] 
(7) eap_tls: TLS_accept: SSLv3/TLS read client key exchange
(7) eap_tls: <<< recv TLS 1.2  [length 0108] 
(7) eap_tls: TLS_accept: SSLv3/TLS read certificate verify
(7) eap_tls: TLS_accept: SSLv3/TLS read change cipher spec
(7) eap_tls: <<< recv TLS 1.2  [length 0010] 
(7) eap_tls: TLS_accept: SSLv3/TLS read finished
(7) eap_tls: >>> send TLS 1.2  [length 0001] 
(7) eap_tls: TLS_accept: SSLv3/TLS write change cipher spec
(7) eap_tls: >>> send TLS 1.2  [length 0010] 
(7) eap_tls: TLS_accept: SSLv3/TLS write finished
(7) eap_tls: (other): SSL negotiation finished successfully
(7) eap_tls: TLS - Connection Established
(7) eap_tls: TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7) eap_tls: TLS-Session-Version = "TLS 1.2"
(7) eap_tls: TLS - got 51 bytes of data
(7) eap_tls: [eaptls process] = handled
(7) eap: Sending EAP Request (code 1) ID 21 length 61
(7) eap: EAP session adding &reply:State = 0xed196798ea0c6a4f
(7)     [eap] = handled
(7)   } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7)   Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7)   TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(7)   TLS-Session-Version = "TLS 1.2"
(7) Sent Access-Challenge Id 7 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(7)   EAP-Message = 0x0115003d0d8000000033140303000101160303002820c44dde9158efed9aece8c93ee8753b97e7e7cb3b5a86a995ae4745e0563177d6272983cdb2f385
(7)   Message-Authenticator = 0x00000000000000000000000000000000
(7)   State = 0xed196798ea0c6a4fafc8729dfaa7718e
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 8 from 127.0.0.1:36986 to 127.0.0.1:1812 length 153
(8)   User-Name = "@suffieldacademy.org"
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   EAP-Message = 0x021500060d00
(8)   State = 0xed196798ea0c6a4fafc8729dfaa7718e
(8)   Message-Authenticator = 0xeba025748d58c526df75cc7d256c079e
(8) Restoring &session-state
(8)   &session-state:TLS-Session-Cipher-Suite = "ECDHE-RSA-AES256-GCM-SHA384"
(8)   &session-state:TLS-Session-Version = "TLS 1.2"
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8)   authorize {
(8)     policy filter_username {
(8)       if (&User-Name) {
(8)       if (&User-Name)  -> TRUE
(8)       if (&User-Name)  {
(8)         if (&User-Name =~ / /) {
(8)         if (&User-Name =~ / /)  -> FALSE
(8)         if (&User-Name =~ /@[^@]*@/ ) {
(8)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
(8)         if (&User-Name =~ /\.\./ ) {
(8)         if (&User-Name =~ /\.\./ )  -> FALSE
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
(8)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))   -> FALSE
(8)         if (&User-Name =~ /\.$/)  {
(8)         if (&User-Name =~ /\.$/)   -> FALSE
(8)         if (&User-Name =~ /@\./)  {
(8)         if (&User-Name =~ /@\./)   -> FALSE
(8)       } # if (&User-Name)  = notfound
(8)     } # policy filter_username = notfound
(8)     [preprocess] = ok
(8)     [chap] = noop
(8)     [mschap] = noop
(8)     [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: Looking up realm "suffieldacademy.org" for User-Name = "@suffieldacademy.org"
(8) suffix: No such realm "suffieldacademy.org"
(8)     [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 21 length 6
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8)     [eap] = updated
(8)     [files] = noop
(8)     [expiration] = noop
(8)     [logintime] = noop
(8)     [pap] = noop
(8)   } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8)   authenticate {
(8) eap: Expiring EAP session with state 0xed196798ea0c6a4f
(8) eap: Finished EAP session with state 0xed196798ea0c6a4f
(8) eap: Previous EAP request found for state 0xed196798ea0c6a4f, released from the list
(8) eap: Peer sent packet with method EAP TLS (13)
(8) eap: Calling submodule eap_tls to process data
(8) eap_tls: Continuing EAP-TLS
(8) eap_tls: Peer ACKed our handshake fragment.  handshake is finished
(8) eap_tls: [eaptls verify] = success
(8) eap_tls: [eaptls process] = success
(8) eap_tls: Validating certificate
(8) Virtual server sa-check-eap-tls received request
(8)   User-Name = "@suffieldacademy.org"
(8)   NAS-IP-Address = 127.0.0.1
(8)   Calling-Station-Id = "02-00-00-00-00-01"
(8)   Framed-MTU = 1400
(8)   NAS-Port-Type = Wireless-802.11
(8)   Service-Type = Framed-User
(8)   Connect-Info = "CONNECT 11Mbps 802.11b"
(8)   EAP-Message = 0x021500060d00
(8)   State = 0xed196798ea0c6a4fafc8729dfaa7718e
(8)   Message-Authenticator = 0xeba025748d58c526df75cc7d256c079e
(8)   Event-Timestamp = "Jul 30 2021 22:19:59 EDT"
(8)   EAP-Type = TLS
(8)   TLS-Cert-Serial := "460d875635c64859ebabee3bba64e93f"
(8)   TLS-Cert-Expiration := "390703160000Z"
(8)   TLS-Cert-Valid-Since := "190703161900Z"
(8)   TLS-Cert-Subject := "/O=Suffield Academy/CN=Suffield Academy Device Intermediate CA"
(8)   TLS-Cert-Issuer := "/O=Suffield Academy/CN=Suffield Academy Device Root CA"
(8)   TLS-Cert-Common-Name := "Suffield Academy Device Intermediate CA"
(8)   TLS-Client-Cert-Serial := "3888adb8c63f74e45be610200664b4b7"
(8)   TLS-Client-Cert-Expiration := "220730225507Z"
(8)   TLS-Client-Cert-Valid-Since := "210730224500Z"
(8)   TLS-Client-Cert-Subject := "/O=Suffield Academy/CN=Test User (TestDevice SER1234567890)"
(8)   TLS-Client-Cert-Issuer := "/O=Suffield Academy/CN=Suffield Academy Device Intermediate CA"
(8)   TLS-Client-Cert-Common-Name := "Test User (TestDevice SER1234567890)"
(8)   TLS-Client-Cert-Subject-Alt-Name-Email := "USERNAME@suffieldacademy.org"
(8)   TLS-Client-Cert-Subject-Alt-Name-Dns := "FILEMAKER_ID"
(8)   TLS-Client-Cert-Subject-Alt-Name-Upn := "Test User (TestDevice SER1234567890)"
(8)   TLS-Client-Cert-X509v3-Authority-Key-Identifier += "keyid:3E:93:53:11:87:4F:79:3B:00:46:29:37:DB:15:7D:50:48:DA:3F:B9\nDirName:/O=Suffield Academy/CN=Suffield Academy Device Root CA\nserial:46:0D:87:56:35:C6:48:59:EB:AB:EE:3B:BA:64:E9:3F\n"
(8)   TLS-Client-Cert-X509v3-Subject-Key-Identifier += "33:6E:27:C7:39:B0:26:C5:9F:35:61:E3:F1:37:A1:51:C0:AF:35:12"
(8)   TLS-Client-Cert-X509v3-Basic-Constraints += "CA:FALSE"
(8)   TLS-Client-Cert-X509v3-Extended-Key-Usage += "TLS Web Client Authentication"
(8)   TLS-Client-Cert-X509v3-Extended-Key-Usage-OID += "1.3.6.1.5.5.7.3.2"
(8) WARNING: Outer and inner identities are the same.  User privacy is compromised.
(8) server sa-check-eap-tls {
(8)   session-state: No cached attributes
(8)   # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/sa-check-eap-tls
(8)     authorize {
(8)       update reply {
(8)         User-Name := "EAP-TLS Updated"
(8)       } # update reply = noop
(8)       update config {
(8)         &Auth-Type := Accept
(8)       } # update config = noop
(8) auth_log: EXPAND /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d
(8) auth_log:    --> /var/log/freeradius/radacct/127.0.0.1/auth-detail-20210730
(8) auth_log: /var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d expands to /var/log/freeradius/radacct/127.0.0.1/auth-detail-20210730
(8) auth_log: EXPAND %t
(8) auth_log:    --> Fri Jul 30 22:19:59 2021
(8)       [auth_log] = ok
(8)     } # authorize = ok
(8)   Found Auth-Type = Accept
(8)   Auth-Type = Accept, accepting the user
(8) } # server sa-check-eap-tls
(8) Virtual server sending reply
(8)   User-Name := "EAP-TLS Updated"
(8) eap: Sending EAP Success (code 3) ID 21 length 4
(8) eap: Freeing handler
(8)     [eap] = ok
(8)   } # authenticate = ok
(8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(8)   post-auth {
(8)     if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name)) {
(8)     if (session-state:User-Name && reply:User-Name && request:User-Name && (reply:User-Name == request:User-Name))  -> FALSE
(8)     update {
(8)       &reply::TLS-Session-Cipher-Suite += &session-state:TLS-Session-Cipher-Suite[*] -> 'ECDHE-RSA-AES256-GCM-SHA384'
(8)       &reply::TLS-Session-Version += &session-state:TLS-Session-Version[*] -> 'TLS 1.2'
(8)     } # update = noop
(8)     [exec] = noop
(8)     policy remove_reply_message_if_eap {
(8)       if (&reply:EAP-Message && &reply:Reply-Message) {
(8)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
(8)       else {
(8)         [noop] = noop
(8)       } # else = noop
(8)     } # policy remove_reply_message_if_eap = noop
(8)   } # post-auth = noop
(8) Sent Access-Accept Id 8 from 127.0.0.1:1812 to 127.0.0.1:36986 length 0
(8)   User-Name := "EAP-TLS Updated"
(8)   MS-MPPE-Recv-Key = 0x384da21259dec571f742f183335e2019e995dc038196eae046b4e091c76d1075
(8)   MS-MPPE-Send-Key = 0xa0a6bc57390ba56b1b538bc0e377231d6379de8e7265ddc348ed7d684cba7762
(8)   EAP-Message = 0x03150004
(8)   Message-Authenticator = 0x00000000000000000000000000000000
(8) Finished request

Jason Healy

Alan DeKok

Jason Healy

tags

participants (2)