Hi,I configured my FR server with PAM.When tried with radclient from localhost (where is FR is installed), user password is displaying in clear text; but when trying to authenticate the same user over network  (using ntradping), user password is showing in "unprintable chars". Following are my configs:radiusd.conf:------------1) pam {                #                #  The name to use for PAM authentication.                #  PAM looks in /etc/pam.d/${pam_auth_name}                #  for it's configuration.  See 'redhat/radiusd-pam'                #  for a sample PAM configurat! ion file.                #                #  Note that any Pam-Auth attribute set in the 'authorize'                #  section will over-ride this one.                #                pam_auth = radiusd        }2)  authenticate {     .......    pam ......   }clients.conf file:---------------client 127.0.0.1 {                secret          = testing123       &n! bsp;        shortname  &n bsp;    = localhost} client  192.168.100.192 {        secret          = testing123        shortname       = private-network-2}users file:----------John90                  Auth-Type = "Pam"                        Reply-Message = "Hello Welcome to Radius, %u"Following is the radius -X o/p:------------------------------rad_recv: Access-Request packet from host 192.168.200.196:4892, id=7, length=46        User-Name = "John90"        User-Password = "i\335T\334\227z\037\345?!<\014\024\220!\205" Processing the authorize section of radiusd.confmod! call: entering group authorize for request 1  modcall[authorize]: module "preprocess" returns ok for request 1  modcall[authorize]: module "chap" returns noop for request 1  modcall[authorize]: module "mschap" returns noop for request 1    rlm_realm: No '@' in User-Name = "John90", looking up realm NULL    rlm_realm: No such realm "NULL"  modcall[authorize]: module "suffix" returns noop for request 1  rlm_eap: No EAP-Message, not doing EAP  modcall[authorize]: module "eap" returns noop for request 1  modcall[authorize]: module "files" returns notfound for request 1rlm_pap: WARNING! No "known good" password found for the user.  Authentication may fail because of this.  modcall[authorize]: module "pap" returns noop for request 1modcall: leaving group authorize (returns ok) for request 1auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the userauth: Failed to valida! te the user.  WARNING: Unprintable characters in the password. ?& nbsp; Double-check the shared secret on the server and the NAS!Delaying request 1 for 1 secondsFinished request 1Going to the next request.......Verified the shared secret and it is given correctly in the request.Is there any configuration need to be done?Appreciate your help.Thanks,Sri