Alan: Thanks for your atention and patience ... I start again the "Deploying Radius ..." with default configuration files "users" and "radiusd.conf" and following the instructions on the web page: 1) Configuring Authentication against Active Directory -> It´s OK ... My Samba is working correctly. I tested it with "wbinfo" and "ntlm_auth" commands. 2) Configuring FreeRADIUS to use ntlm_auth -> It´s OK ... The radtest worked well without problems. 3) Configuring FreeRADIUS to use ntlm_auth for MS-CHAP -> It didn´t work ... I don´t know what is wrong ... My output FreeRadius presents the same messages that previously: Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/local/etc/raddb/proxy.conf Config: including file: /usr/local/etc/raddb/clients.conf Config: including file: /usr/local/etc/raddb/snmp.conf Config: including file: /usr/local/etc/raddb/eap.conf Config: including file: /usr/local/etc/raddb/sql.conf main: prefix = "/usr/local" main: localstatedir = "/var" main: logdir = "/var/log" main: libdir = "/usr/local/lib" main: radacctdir = "/var/log/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "(null)" main: group = "(null)" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/local/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = yes proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/local/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = yes Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "/usr/local/bin/ntlm_auth --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{mschap:NT-Domain:-copel} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" Module: Instantiated mschap (mschap) exec: wait = no exec: program = "/usr/local/bin/ntlm_auth --request-nt-key --domain=COPEL --username=%{mschap:User-Name} --password=%{User-Password}" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" Module: Instantiated exec (ntlm_auth) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "peap" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc tls: rsa_key_exchange = no tls: dh_key_exchange = yes tls: rsa_key_length = 512 tls: dh_key_length = 512 tls: verify_depth = 0 tls: CA_path = "(null)" tls: pem_file_type = yes tls: private_key_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: certificate_file = "/usr/local/etc/raddb/certs/cert-srv.pem" tls: CA_file = "/usr/local/etc/raddb/certs/demoCA/cacert.pem" tls: private_key_password = "whatever" tls: dh_file = "/usr/local/etc/raddb/certs/dh" tls: random_file = "/usr/local/etc/raddb/certs/random" tls: fragment_size = 1024 tls: include_length = yes tls: check_crl = no tls: check_cert_cn = "(null)" tls: cipher_list = "(null)" tls: check_cert_issuer = "(null)" rlm_eap_tls: Loading the certificate file as a chain rlm_eap: Loaded and initialized type tls peap: default_eap_type = "mschapv2" peap: copy_request_to_tunnel = no peap: use_tunneled_reply = no peap: proxy_tunneled_request_as_eap = yes rlm_eap: Loaded and initialized type peap mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups" preprocess: hints = "/usr/local/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/usr/local/etc/raddb/users" files: acctusersfile = "/usr/local/etc/raddb/acct_users" files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users" files: compat = "no" Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 10.4.3.248:32768, id=105, length=65 User-Name = "copel\\charles" User-Password = "password" Service-Type = Authenticate-Only NAS-IP-Address = 200.195.147.120 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "copel\charles", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 154 modcall[authorize]: module "files" returns ok for request 0 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 modcall[authenticate]: module "unix" returns notfound for request 0 modcall: leaving group authenticate (returns notfound) for request 0 auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 105 to 10.4.3.248 port 32768 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 105 with timestamp 46eec968 Nothing to do. Sleeping until we see a request. What more should I check or configure and how ? Best Regards. Charles. Alan DeKok <aland@deployingradius.com> Enviado Por: freeradius-users-bounces@lists.freeradius.org 17/09/2007 11:55 Favor responder a FreeRadius users mailing list Para: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> cc: cco: Charles Alcantara Borba/COPEL Assunto: Re: Configuring FreeRADIUS to use ntlm_auth charles@copel.com wrote:

I think that I did just some changes describes in the document with the files: the users file: it is original (I delete the testing entry used "user Auth-Type := ntlm_auth");

Which is why it's not using ntlm_auth for authentication.

the radisud.conf file: it is original with following changes: ...

And the server hasn't been told *how* to authenticate users. It either needs to be told what the "known good" password is, OR it needs to be told who else on the network can authenticate the user. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html Esta mensagem e seus anexos foram verificados por software anti-vírus. Recomenda-se que não sejam abertos e/ou executados anexos de mensagens de conteúdo ou remetente duvidoso.